Search Jobs

The City of Auburn is looking for a Transportation Supervisor to join our team!

WHAT YOU WILL DO

The Transportation Supervisor is an important part of the City's transit team that provide services including the Auburn Loop fixed route and Auburn OnDemand ride share programs.

Under direction of the Public Works Director, Transit Manager or designee, the incumbent coordinates, supervises, assigns, reviews and participates in the work of staff responsible for Auburn Transit's daily operations; schedule drivers to ensure routes are completed in a safe and timely manner; ensures work quality and adherence to established policies and procedures including providing necessary training and ensuring re-certification of drivers as required; and operates a bus as necessary to cover shifts.

For more information about the services that Auburn Transit offers, visit:

• https://www.auburn.ca.gov/192/Transit-Services

REPRESENTATIVE DUTIES

The following duties are typical for this classification. Incumbents may not perform all of the listed duties and/or may be required to perform additional or different duties from those set forth below to address business needs and changing business practices.

• Plan, prioritize, assign, supervise, review, and participate in the work of staff responsible for Auburn Transit daily operations; perform regular road supervision, vehicle trial checks, and daily vehicle inspection monitoring.
• Establish schedules and methods for providing Auburn Transit services; schedule drivers to ensure routes are completed in a safe and timely manner; coordinate any changes to facilitate coverage for all shifts.
• Coordinates transportation needs for local schools and special events; prepares calendar of trips or special events to be incorporated into the bus timetable; identify resource needs; review needs with appropriate management staff; allocate resources accordingly.
• Provide an increasing level of customer service and satisfaction by providing service that is flexible, dependable, and consistent.
• Participate in the development of policies and procedures; monitor work activities to ensure compliance with established policies and procedures; make recommendations for changes and improvements to existing standards and procedures.
• Recommend and assist in the implementation of goals and objectives; implement approved policies and procedures.
• Participate in the selection of Bus Drivers; provide or coordinate staff training; issue manuals, bulletins and technical guides to improve services and operational activities; work with employees to correct deficiencies; implement discipline procedures.
• Coordinate training for driver certification and maintenance of certification; document all training in the driver training records; act as a liaison with CHP and DMV regarding certification and training record documentation.
• Provide staff assistance to the Transit Manager; participate on a variety of committees; prepare and present reports of operations and activities and other correspondence as appropriate and necessary.
• Coordinate maintenance for buses and allocate buses to be used on routes.
• Respond to the scene of transit vehicle accidents and passenger incidents; provide on the scene assistance to drivers and passengers.
• Investigate accidents and incidents; make prompt and accurate reports; review investigation with transit drivers and determine accident preventability and recommend appropriate corrective actions.
• Act as Safety Liaison with various agencies including police and emergency authorities as necessary.
• Provide regular informational and safety meetings.
• Perform a full range of customer relations; answer questions from the public relating to bus routes and schedule of pick-ups and drop-offs; issue bus passes.
• Work with local businesses to promote the use of Auburn Transit and fulfill the optimal service hours of the route.
• Operate a bus as necessary to cover shifts.
• Perform related duties as required.

KNOWLEDGE, SKILLS AND ABILITIES

The following generally describes the knowledge and ability required to enter the job and/or be learned within a short period of time in order to successfully perform the assigned duties.

Knowledge of: Operational characteristics, services, and activities of a public transit program; principles of supervision, training, and performance evaluation; operational characteristics, maintenance, and emergency repair principles related to assigned vehicles; vehicle inspection principles and practices; geography of the City; pertinent federal, state, and local codes, laws, and regulations including traffic and safety laws, ordinances, regulations, and rules applicable to the operation of vehicles in the transportation of passengers; certifications required for the operation of a bus carrying passengers; occupational hazards and standard safety practices; methods and techniques of public relations and customer service; principles and procedures of record keeping; safe and defense driving principles and practices; basic first aid principles and practices.

Ability to: Supervise, direct, and coordinate the work of lower level staff; select, supervise, train, and evaluate staff; prepare clear and concise reports; drive a bus and other automotive equipment safely and efficiently in traffic; maintain order among passengers on a bus; properly load, tie down, and secure wheelchairs on the bus; interpret and apply applicable federal, state, and local laws, codes, and regulations as well as administrative and departmental policies and procedures; work safely and adhere to principles of safety; respond tactfully, clearly, concisely, and appropriately to inquiries from the public, press, or other agencies on sensitive issues in area of responsibility; compile data, maintain records and files, and participate in the preparation of clear and concise reports; independently prepare routine correspondence and memoranda; operate office equipment including computers and supporting word processing, spreadsheet, and database applications; communicate clearly and concisely, both orally and in writing; establish and maintain effective working relationships with those contacted in the course of work.

PHYSICAL DEMANDS AND WORKING ENVIRONMENT

The conditions herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions.

Environment: Standard office setting and field environment; travel from site to site; extensive public contact; exposure to all types of weather and temperature conditions; noise, dust, fumes, noxious odors, and gases.

Physical: Primary functions require sufficient physical ability to work in an office setting and to operate a passenger bus for extended periods of time; push, pull, lift, and/or carry moderate amounts of weight; twist; climb steps; operate office equipment and assigned vehicles.

Vision: See in the normal visual range with or without correction; vision sufficient to read computer screens and printed documents.

Hearing: Hear in the normal audio range with or without correction.

The City of Auburn is hiring to fill a part-time, Retired Annuitant Bus Driver I/II position.  Under general supervision, this position operates a bus over designated routes to transport passengers; maintains established schedule; and ensures passenger safety.

The Retired Annuitant position is limited to work no more than 960 hours per fiscal year.  Placement in the class series is dependent upon qualifications.  The salary range for each level is below:

• Bus Driver I:  $45,864 - $58,552
• Bus Driver II:  $48,152 - $61,484

REPRESENTATIVE DUTIES

The following duties are typical for this classification. Incumbents may not perform all of the listed duties and/or may be required to perform additional or different duties from those set forth below to address business needs and changing business practices.

• Drive a bus over a designated route to transport passenger in accordance with established time schedule; follow all rules and regulations including those in the vehicle code and motor carries commercial diver’s handbook.
• Pick up and off load passengers at pre-arranged locations; assist passengers in boarding and departing the bus; secure all wheelchairs with proper devices.
• Collect fares and issue passes to passengers.
• Ensure passenger safety on bus; maintain order among passengers on the bus.
• Render aid to passengers in an emergency.
• Transport passengers on field trips and to special events.
• Make regular inspections of bus including pre-trip safety inspections following established check lists; check belts, oil, and water levels.
• Perform minor repair and maintenance of bus; regularly wash bus, inside and out; maintain cleanliness of bus shelter.
• Maintain daily records of bus operation.
• Perform related duties as required.

KNOWLEDGE, SKILLS AND ABILITIES

The following generally describes the knowledge and ability required to enter the job and/or be learned within a short period of time in order to successfully perform the assigned duties.

Knowledge of:  Safe and defense driving principles and practices; basic first aid principles and practices; operational characteristics, maintenance, and emergency repair principles related to assigned vehicles; vehicle inspection principles and practices; geography of the City; pertinent federal, state, and local codes, laws, and regulations including traffic and safety laws, ordinances, regulations, and rules applicable to the operation of vehicles in the transportation of passengers; occupational hazards and standard safety practices; methods and techniques of public relations and customer service; basic principles and procedures of record keeping.

Ability to:  Drive a bus and other automotive equipment safely and efficiently in traffic; maintain order among passengers on a bus; properly load, tie down, and secure wheelchairs on the bus; apply applicable state and local laws, codes, and regulations pertaining to transportation as well as administrative and departmental policies and procedures; respond tactfully, clearly, concisely, and appropriately to inquiries and requests from the public; work safely and adhere to principles of safety; work independently in the absence of supervision; understand and follow oral and written instructions; communicate clearly and concisely, both orally and in writing; establish and maintain effective working relationships with those contacted in the course of work.
 

PHYSICAL DEMANDS AND WORKING ENVIRONMENT

The conditions herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions.

Environment:  Field environment; travel from site to site; extensive public contact; exposure to all types of weather and temperature conditions; noise, dust, fumes, noxious odors, and gases.
Physical: Primary functions require sufficient physical ability to operate a passenger bus for extended periods of time; push, pull, lift, and/or carry moderate amounts of weight; twist; climb steps; operate assigned vehicles.

Vision:  See in the normal visual range with or without correction.

Hearing:  Hear in the normal audio range with or without correction.

SELECTION PROCESS

Applicants will be screened in relation to the qualifications and duties of the position.  Candidates deemed highly qualified will be invited to the interview process.  Meeting the minimum qualifications does not guarantee an invitation to the process.  The process may include other skills assessments, interviews and/or related components. The selected incumbent must pass a pre-placement process including a background check, live scan and medical exam.

Human Resources will make reasonable efforts in the examination process to accommodate persons with disabilities.  Please advise HR of any special needs a minimum of five days in advance of the selection process exam by calling (530) 823-4211 ext. 114 or emailing hr@auburn.ca.gov.  The City of Auburn is an Equal Opportunity Employer.

The information contained herein is subject to change and does not constitute either an expressed or implied contract.

The City of Auburn is hiring a part-time Bus Driver I/II.  Under general supervision, this position operates a bus over designated routes to transport passengers; maintains established schedule; and ensures passenger safety.

This position is limited to work no more than 999 hours per fiscal year and is considered half-time. Placement in the classification is dependent on qualifications. The salary range for each level is below:

• Bus Driver I:  $45,864 - $58,552
• Bus Driver II:  $48,152 - $61,484

REPRESENTATIVE DUTIES

The following duties are typical for this classification. Incumbents may not perform all of the listed duties and/or may be required to perform additional or different duties from those set forth below to address business needs and changing business practices.

• Drive a bus over a designated route to transport passenger in accordance with established time schedule; follow all rules and regulations including those in the vehicle code and motor carries commercial diver’s handbook.
• Pick up and off load passengers at pre-arranged locations; assist passengers in boarding and departing the bus; secure all wheelchairs with proper devices.
• Collect fares and issue passes to passengers.
• Ensure passenger safety on bus; maintain order among passengers on the bus.
• Render aid to passengers in an emergency.
• Transport passengers on field trips and to special events.
• Make regular inspections of bus including pre-trip safety inspections following established check lists; check belts, oil, and water levels.
• Perform minor repair and maintenance of bus; regularly wash bus, inside and out; maintain cleanliness of bus shelter.
• Maintain daily records of bus operation.
• Perform related duties as required.

KNOWLEDGE, SKILLS AND ABILITIES

The following generally describes the knowledge and ability required to enter the job and/or be learned within a short period of time in order to successfully perform the assigned duties.

Knowledge of:  Safe and defense driving principles and practices; basic first aid principles and practices; operational characteristics, maintenance, and emergency repair principles related to assigned vehicles; vehicle inspection principles and practices; geography of the City; pertinent federal, state, and local codes, laws, and regulations including traffic and safety laws, ordinances, regulations, and rules applicable to the operation of vehicles in the transportation of passengers; occupational hazards and standard safety practices; methods and techniques of public relations and customer service; basic principles and procedures of record keeping.

Ability to:  Drive a bus and other automotive equipment safely and efficiently in traffic; maintain order among passengers on a bus; properly load, tie down, and secure wheelchairs on the bus; apply applicable state and local laws, codes, and regulations pertaining to transportation as well as administrative and departmental policies and procedures; respond tactfully, clearly, concisely, and appropriately to inquiries and requests from the public; work safely and adhere to principles of safety; work independently in the absence of supervision; understand and follow oral and written instructions; communicate clearly and concisely, both orally and in writing; establish and maintain effective working relationships with those contacted in the course of work.
 

PHYSICAL DEMANDS AND WORKING ENVIRONMENT

The conditions herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions.

Environment:  Field environment; travel from site to site; extensive public contact; exposure to all types of weather and temperature conditions; noise, dust, fumes, noxious odors, and gases.
Physical: Primary functions require sufficient physical ability to operate a passenger bus for extended periods of time; push, pull, lift, and/or carry moderate amounts of weight; twist; climb steps; operate assigned vehicles.

Vision:  See in the normal visual range with or without correction.

Hearing:  Hear in the normal audio range with or without correction.

SELECTION PROCESS

Applicants will be screened in relation to the qualifications and duties of the position.  Candidates deemed highly qualified will be invited to the interview process.  Meeting the minimum qualifications does not guarantee an invitation to the process.  The process may include other skills assessments, interviews and/or related components. The selected incumbent must pass a pre-placement process including a background check, live scan and medical exam.

Human Resources will make reasonable efforts in the examination process to accommodate persons with disabilities.  Please advise HR of any special needs a minimum of five days in advance of the selection process exam by calling (530) 823-4211 ext. 114 or emailing hr@auburn.ca.gov.  The City of Auburn is an Equal Opportunity Employer.

The information contained herein is subject to change and does not constitute either an expressed or implied contract.

The position is responsible for the performance of both the day-to-day power settlements among NCPA members, Western, California, and Federal electricity markets, local balancing authority area operators (CAISO, BANC, EIM), as well as settlement activities associated with NCPA Power Management’s Service Customers. Other responsibilities include tracking and meter data management validation duties, GHG (Greenhouse Gas) monitoring and analysis, analysis and testing associated with new CAISO market initiatives, and comprehensive analytic or technical studies, as required, including proceedings before state and federal regulatory agencies and public officials. This is a full journey-level position capable of performing all the duties and responsibilities of the Settlements Analyst I. Performs the full range of duties as assigned, receiving only occasional instruction, training, or assistance as new or unusual situations arise. Additionally, incumbents perform a variety of assigned complex technical and professional work in the areas of power accounts settlements, budgeting, systems development, and audit. Incumbents also provide technical analysis and assistance to staff, Members, contractual participants, and others, as required.

ESSENTIAL DUTIES AND RESPONSIBILITIES
This position requires that the incumbent report for work on time and maintain satisfactory attendance in accordance with Agency policy; Ensures work responsibilities are covered when absent; Arrives to meetings and appointments on time; Performs special assignments as assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.

Responsibilities:
Provides technical advice, functional instruction, and guidance to less experienced Power Settlement staff as needed. Trains new Power Settlements Analysts and cross trains as roles evolve. Recommends personnel actions. Prepares and presents training/tutorials on All Resources Bill, Pre-Bill process, Power Settlement processes overall, and various other topics, as needed, in person or via webinars (s) to NCPA Members and Project Participant staff.

Serves as subject matter expert, working with Information Services, on Power Settlements application requirements, such as All Resources Bill enhancements, and testing system enhancements in development.

Implements and operates complicated power settlements systems. Prepares complex analytical reports and supporting documentation.

Provides analysis, integration, and implementation of new energy market initiatives and/or customers/Scheduling Coordination accounts (e.g., ISO, Western Energy Imbalance Market (“EIM”), renewable generating resources, Community Choice Energy/Aggregators (“CCE”).

Monitors settlements associated with Renewable Energy Credits and acts as or provides support to NCPA’s Qualified Reporting Entity representative; registers credits on the Western Renewable Energy Generation Information System (“WREGIS”) or its successor.

Monitors settlements functions of Western capacity and energy allocations, market purchases and sales, Pool transmission activity, and other transactions as they occur; Prepares or reviews power settlement transactions for proper budget classification.

Conducts special studies requiring complex, voluminous, and detailed analysis of power costs and revenues. Recommends operational changes that provide better value to Members and Participants.

Coordinates and participates in the development, analysis, and monitoring of the Agency's power supply budgets. Acts as power settlements representative to other department managers and supervisors in regard to cost summary and budgetary reports.

Assists with the implementation of systems, policies, and procedures and special projects requiring highly technical study and analyses. Recommends changes or modifications to methods or systems as applicable.

Assists with formal budget and other presentations to upper management and the governing body.
Performs special assignments for the Power Settlements Supervisor or others as assigned, including preparation of testimony and exhibits for presentation before state and national regulatory proceedings.

MINIMUM QUALIFICATIONS

Education and/or Experience
Bachelor's degree (B. A.) from a four-year college or university with an emphasis on quantitative analysis, plus four (4) years of prior experience as a Power Settlements Analyst I or an equivalent combination of education and experience.

KNOWLEDGE AND ABILITIES 
Knowledge:
Knowledge of California Independent System Operator settlements procedures for tariff services and Metered Subsystem services; NCPA settlements procedures for scheduling coordinator services and the ten-member power pool; California Energy Imbalance Markets; NCPA’s Western (WAPA) contracts
California’s Green House Gas rules; CARB renewable energy credits; Knowledge of NCPA settlements procedures for scheduling coordinator services and the ten-member power pool.

Abilities:
Ability to retrieve detailed records and summary-level data from NCPA’s Oracle database systems through the use of Structured Query Language (“SQL”) statements in proprietary software (e.g., SAS, Toad, SQL Developer, Oracle Database Connection [“ODBC”]) and process through proprietary or open-source software programming applications (e.g., SAS, Visual Basic for Applications [“VBA”], R, Python, Excel workbooks); Ability to read, analyze, and interpret CAISO tariff, NCPA operating agreements, and contracts, standard industry power purchase agreements, technical procedures, and governmental regulations; Ability to write reports, business correspondence, and procedure manuals; Ability to present information effectively and respond to questions from groups of managers, clients, customers, and the general public; and the Ability to analyze and interpret settlement formulas expressed in summation notation.

SPECIAL REQUIREMENTS

Valid California Driver's License and insurance. 

This job has no supervisory responsibilities.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is frequently required to stand; sit; use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee is occasionally required to walk; climb or balance; stoop, kneel, crouch, or crawl, and taste or smell. The employee must occasionally lift and/or move up to 10 pounds. Specific vision abilities required by this job include close vision, distance vision, depth perception, and the ability to adjust focus.

The noise level in the work environment is usually moderate.

All employees are responsible for contributing to an inclusive, safe, and secure work environment that values diverse cultures, perspectives, and experiences and is free from discrimination.
 

Located in Middletown, CA!

This position performs a variety of engineering tasks relating to plant reliability and performance efficiency, troubleshoots plant and equipment problems and responsible for the collection, processing and interpretation of production, thermodynamic, geologic and geophysical data necessary to recommend actions to maximize steam production and plant generation. This position may also undertake special projects as assigned by and through the Plant Manager. The level of supervision will be dependent upon the incumbent’s classification level (Engineer III, IV, or V) but all levels will perform a variety of assigned complex technical and professional work.

ESSENTIAL DUTIES AND RESPONSIBILITIES

This position requires the incumbent reports for work on time and maintains satisfactory attendance in accordance with Agency policy; Ensures work responsibilities are covered when absent; Arrives to meetings and appointments on time; Performs special assignments for the Plant Manager or others as assigned.  Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Level III:
Employees at this level receive only general instruction or assistance as new, unusual or unique situations arise and are fully aware of the operating procedures and policies within the work unit.  Engineers at this level are expected to manage smaller projects with minimal direction. 

Level IV:
This is the journey person level class within the Engineer series. Working with minimal direction, employees at this level perform the projects and troubleshooting assignments. May lead capital projects including prioritizing work, giving project assignments, directing and reviewing work, and providing guidance and instruction to project personnel including professional engineering staff, other staff and contractors. 

Level V:
This the senior level class within the Engineering series. Working with minimal direction often taking plant goals and translating them into work assignments for the individual and in many cases other departments. Employees at this level are given the most complex projects (many cases maybe multi- year, many different disciplines of work, large contracts) and complex trouble shooting.

Responsibilities: 

Level III:
Interfaces with plant staff to optimize plant output.

Estimates forward projection of steam supplies and generation of the geothermal field.

Evaluates the effects of injection within the field and makes injection recommendations based on the available tracer, MEQ, and reservoir data.

Recommends pipeline and control system design changes necessary to increase system operating efficiencies.

Reduces operating expenses in conjunction with the business unit goals and budget.  

Develops and uses databases to perform analysis of plant generation and production including predictions of reservoir reserves, forward projections for generation and production, and impact analysis of future projects both within the existing site and the analysis of any investment possibilities.

Acts as a point of contact with the NCPA Generation Services Engineering Department and provides engineering assistance as requested.

Level IV:
In addition to Level III class, this item;

Assists in the preparation of engineering solutions for problems related to production, generation and transmission.

Communicates with staff, management, technical committees, commission, and regulators through memos, meetings, and reports.

Assists in making injection recommendations to maximize the recovery of injection-derived-steam.

Develops conceptual models of the reservoir, prepares estimates of field reserves and forecasts of future production and generation and related reports, as needed.
Initiates, develops and presents annual Steam Field budget.
Prepares and submits reservoir maps based on well flowrate, pressure, gas and tracer data.

Initiates and approves requisitions and invoices, tracks cost and insures projects are cost­ effective.

Acts as project manager on assigned projects which includes planning, interdepartmental coordination, budgeting, implementation, progress reporting, quality control, payment approval, etc.

Level V:
In addition to Level IV class, this item;

Sets standards of performance for direct reports, provides coaching and development opportunities, and assesses performance.

Gathers and interprets the necessary information to comply with permits from the Bureau of Land Management, Regional Water Quality Control Board, and Air Quality Management District(s) for all drilling, workover, conversion to injection and well abandonment programs. 

Prepares and submits required periodic operations reports.

Represents Agency on the Effluent Committee, Geothermal Resources Council and Geysers Geothermal Association.

Analyzes and interprets wireline logs including, but not limited to: PT, PTS and Casing Caliper logs.

Coordinates with other staff at the NCPA Geothermal facility and others in providing steam field engineering support.

Develops and utilizes computerized databases to analyze generation and production in support of engineering solutions and recommendations.

Maintains good working relationship with regulators including Federal Bureau of Land Management, California Department of Conservation (DOGGR), Sonoma County Air Quality Management District, Lake County Air Quality Management District, etc.

May be called upon to step into the Plant Manager or Operations and Maintenance Supervisor role from time to time.

EDUCATION AND/OR EXPERIENCE      

Level III:
Bachelor’s Degree in Engineering (Mechanical or Electrical preferred) from an accredited four-year college or university is required; and a minimum of three (3) years in power plant/production engineering.  A minimum California Engineer-in-Training Certificate is required. A California Professional Engineering License is highly desirable and in some cases a requirement.

Level IV:
This level requires a Bachelor’s degree in Engineering (Mechanical or Electrical preferred) an accredited four-year college or university; and a minimum of five (5) years related experience in power plant/production engineering.  A California Professional Engineering License is highly desirable and in some cases a requirement. 

Level V: 
This level requires a Bachelor’s degree in Engineering (Mechanical or Electrical preferred) plus a Master’s degree in reservoir engineering from an accredited four-year college or university; and a minimum of six (6) years related experience preferably within a steamfield reservoir generating plant.  A California Professional Engineering License is highly desirable and in some cases a requirement.

KNOWLEDGE AND ABILITIES 

Knowledge:                                                                                                                                                            Knowledge of power plant operations and plant design parameters; methods, materials and techniques used in making engineering evaluations on the performance of the physical reservoir processes including but not limited to volumetric voidage calculations, water frontal advance maps, water percentage versus cumulative production curves, injectivity and production capabilities, together with other secondary recovery methods; General power plant safety principles and practices; Knowledge of local, state and federal regulations applicable to electric utility generator operators and generator owners; Knowledge of utility industry, generation practices, and new developments; Use and application of computer aided design software; Principles and practices of applicable ASME codes and standards; Principles of budget preparation and administration; Proficiency with MS Word and Excel;  Experience with MS PowerPoint, MS Project, MS SharePoint, OSIsoft PI, CMMS, AutoCAD, and relational databases (e.g. MS Access) is desirable; Demonstrated application of business and systems analysis techniques, SQL, client- server and web base technology, and report writing tools is also desirable; Requirements of Public Works Contracts including, Public Works bid process, roles and responsibilities of NCPA project manager versus contractor, bonding Public notices and registration requirements; project closure; NCPA leadership standards and expected leadership behaviors and considerable skill in verbal and written communications.
In addition, requires knowledge of California Public Utilities Code and General Orders; trends, issues, State and Federal requirements, and basic court decisions affecting public utilities and transportation regulation; knowledge of engineering terminology, fundamentals, mathematics, and economics; financial structure and prescribed accounting classifications; knowledge of standards of service, reliability, and safety; materials and methods of engineering construction; procedures of conducting hearings before the California Public Utilities Commission and other regulatory agencies.

Abilities:
Observe and enforce NCPA safety procedures and to establish and maintain project priorities and to reason logically and creatively.  Must develop and evaluate alternatives; analyze data and perform research work; analyze situations accurately and take effective action; communicate and negotiate effectively; prepare reports, correspondence, safety oversight plans, and exhibits; translate engineering calculations and analyses into concepts usable by decision-makers; testify on results of completed studies; consult with and advise administrators, decision-makers, and other interested parties on a broad range of subject-matter areas; serve as a lead person and gain and maintain the confidence and cooperation of those contacted during the course of work; utilize complex computer operations, intermediate to advanced programming, relational databases, and operating systems, and advanced features of software packages (word processing, spreadsheet, graphics, customized products, etc.); control project costs and report progress; conduct post project reviews and consistently manage NCPA staff or contractors in pursuit of facility goals.

SPECIAL REQUIREMENTS

Professional Engineer license is highly desirable, and in some cases is a requirement.

Valid California Driver's License and insurance, as travel by car to NCPA facilities is required.
Additional coursework or certifications in information technology are helpful.

The Reservoir Engineer III has no supervisory responsibilities.

The Reservoir Engineer IV may be called upon to lead projects and may act as interim supervisor as needed. 

The Reservoir Engineer V supervises projects i.e. (drilling, wireline, reservoir upgrades) and may supervise other staff including student interns and lower level engineers on rotational assignments.   

While performing the duties of this job, the employee is frequently required to stand; sit; use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee is occasionally required to walk; climb or balance; stoop, kneel, crouch, or crawl and taste or smell. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, depth perception and ability to adjust focus.
 

This position is open until filled. The first review of applications is January 31, 2024.

*Effective July 2024, this position will receive a 2.5% base salary increase.

THE POSITION

Reporting to the Director of Administrative Services, the Management Analyst (Risk Management) provides professional support to risk management programs including: workers' compensation, safety compliance, review and approval of contracts and Certificates of Insurance, risk transfer, and leave and disability administration. 

In addition, you will have the opportunity to coordinate and oversee workers' compensation claims management including monitoring accepted claims and providing information to claimants, attorneys, and the workers' compensation carrier. You will also serve as a consultant to City departments and employees on Risk Management (workers' compensation, safety, contract insurance) problems and communicate regularly with internal and external parties to maximize the effectiveness and efficiency of assigned programs and activities, minimize risk, and advise of claim developments. This position will also support the City's leave management program.

To view the entire job description, click here.

ABOUT YOU

We are looking for a solution-focused problem solver who is responsive to organizational needs and open to new ideas and approaches to deliver HR services. Additionally, our ideal candidate will:

• Have a demonstrated ability to manage and organize multiple HR projects and priorities. 
• Understand and apply principles and practices of being an HR Business Partner.
• Have a strategic perspective and the ability to see the long-term impact of projects and initiatives.
• Be an outstanding communicator with exceptional interpersonal, analytical, written, verbal communication, and presentation skills.
• Proven technical skills and the desire to be a generalist in the HR functional areas assigned.

MINIMUM REQUIREMENTS

Possession of a bachelor's degree with major coursework in public or business administration, finance, human resources, economics, or a closely related field;

AND

Three (3) years of increasingly responsible professional experience performing public administration, finance, housing, or human resources functions; or

One (1) year of experience at a level equivalent to the City’s class of Associate Management Analyst or Administrative Analyst.

When assigned to a specific functional area as noted above, additional knowledge and experience in such area may be desirable.

Public sector experience is preferred.

Licenses and Certifications

• Possession of, or ability to obtain and maintain, a valid California Class C Driver's License and a satisfactory driving record is required. Individuals who do not meet this requirement due to a disability will be reviewed on a case-by-case basis. 

This position performs a wide variety of responsible bookkeeping and clerical duties under general supervision and within a framework of established procedures. Perform a large amount of the daily bookkeeping and administrative work associated with accounts payable, accounts receivable, the general ledger, cash & investments, internal credit card claim processing, and support services administration.  Assist in the preparation of participant and third-party power billings, and fuel-steam and other allocations. Monitor the collection of accounts receivable. 

ESSENTIAL DUTIES AND RESPONSIBILITIES
This position requires the incumbent reports for work on time and maintains satisfactory attendance in accordance with Agency policy; Ensures work responsibilities are covered when absent; Arrives to meetings and appointments on time; Performs special assignments for the Treasurer-Controller or others as assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Accounting Clerk I:
Perform full cycle accounts payable processing to include: creation and maintenance of vendor files; verification of invoices, including quantities, dollar amounts, and payment and discount terms; matching and cross-referencing invoices to receiving documents, requisitions, purchase orders, contracts, and shipping documents, reconciling with vendor statements, and ensuring timely payment to vendors.

Track, monitor, and process electronic purchase order files, including invoices,  payments, open purchase orders, work orders, partial payments, and other information as required to expedite and document accounts payable transactions. Resolve exceptions through contact and coordination with appropriate vendor and Agency purchasing officials.

Assist in t in the maintenance of subsidiary accounts payable ledgers, fixed asset records, accounts receivable, work order and related systems and reconcile to the general ledger.  

Assist with reconciling cash accounts and documents to Agency records. Responsible for the distribution of recurring reports

Review and process employee advances, expense reports, and credit card transactions in accordance with Agency policy and procedures.

Provide administrative support for NCPA’s Support and Shared Services Programs, including review and verification of insurance terms, confirming insurance is up-to-date, and entering into appropriate tracking tool.  

Process, review and route invoices to Member(s) for approval for payment; submission of invoices to accounting for payment. Upload various documents into electronic database program SharePoint.

Communicate effectively with internal and external partners and respond to inquiries in a timely manner and provide internal and external support services-related assistance to various cross functional partners. 

Compose, format, edit, and type routine correspondence, prepare Commission Staff reports and monthly Support Services report as assigned. Prepare annual report for the General Manager and Chief Executive Officer and other required reports as assigned. 

May include coordination with the Southern California Public Power Authority (SCPPA) for an efficient process for Shared Services to NCPA Members who use SCPPA contracts. Inspect, read, edit, and verify documents and assess data

Accounting Clerk II:
In addition to the duties for the level I class, this level:

Maintaining the Agency's general ledgers and subsidiary ledgers and in preparation of recurring journal entries, audit schedules, account analyses, and special data requests. Assist and instruct new clerical employees as required.  

Maintain subsidiary accounts payable ledgers, fixed asset records, accounts receivable, work order and related systems and reconcile to the general ledger. Maintain the Agency's general ledgers and subsidiary ledgers and in preparation of recurring journal entries, audit schedules, account analyses, and special data requests. Assist and instruct new clerical employees as required.

Provide support to Treasurer. Track cash activity, update wire, and cash schedules daily, including ACH and wire transfer origination, check run initiation, vendor book transfers, upload of positive pay files, and weekly cash requirements forecasting. In addition, input investments, interest, bank sweep activity into investment management software and compile monthly Treasurer’s Report. Track, balance, and report transactions between various funds with high level of accuracy and a high level of attention to detail.  

Maintain and reconcile cash accounts and documents to Agency records. Coordinate and resolve related matters with outside entities, managers, supervisors, and or employees as applicable. Also responsible for the distribution of recurring reports.

MINIMUM QUALIFICATIONS

Education and/or Experience      

Accounting Clerk I:
This level requires a minimum of a high school diploma supplemented with college-level training in business or a related field and a minimum of two years of experience performing similar job responsibilities. An associate of art degree from an accredited college with major coursework in accounting or a related field is preferred.  

Accounting Clerk II:        
This level requires a minimum of a high school diploma supplemented with college-level training in business or a related field and a minimum of four years of experience performing similar job responsibilities with minimal supervision. An associate of art degree from an accredited college with major coursework in accounting or a related field is preferred.  

KNOWLEDGE AND ABILITIES 
Knowledge:
Knowledge of generally accepted accounting practices and principles, including accounts payable and receivable, journal entries and ledgers, cash management practices, account reconciliation, and purchasing; Knowledge of business English and correspondence, Microsoft Office, including Word, Excel, PowerPoint, and Outlook, and possess strong organizational and time-management skills, and the knowledge of manual and computerized accounting systems and practices. 

Abilities:
Ability to be detail-oriented and work with a high level of accuracy; Listen to, read, and comprehend instructions, short correspondence, and memos and ask for clarification when necessary; Ability to effectively present information in one-on-one and small group situations to clients and other employees of the organization in writing and in person and to speak clearly and persuasively; Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals; Compute rate, ratio, and percent and to draw and interpret bar graphs and apply mathematical concepts to accounting transactions; and the ability to deal with problems involving several concrete variables in standardized situations.

SPECIAL REQUIREMENTS

Valid California Driver's License and insurance. 

While performing the duties of this job, the employee is regularly required to sit. The employee is occasionally required to stand and walk. The employee must regularly lift and /or move up to 10 pounds. 

This job has no supervisory responsibilities.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The noise level in the work environment is usually moderate.

All employees are responsible for contributing to an inclusive, safe, and secure work environment that values diverse cultures, perspectives, and experiences and is free from discrimination.
 

Pioneer Community Energy Seeks a Manager, Quantitative Analysis and Modeling

THE POSITION
The Manager, Quantitative Analysis and Modeling is responsible for organizing, assigning, reviewing and participating in professional duties related to analysis and modeling, structured product development, portfolio risk management, and integrated resource planning. Duties include:

• Planning, prioritizing, reviewing and participating in the performance of professional analysis and modeling of risk and value around complex transactions and portfolio positions, including structured products, rate analysis and development, and hedging strategies.
• Developing methods and schedules to accomplish assignments, ensuring work is completed in a timely and accurate manner.
• Developing pricing and calibration models for a variety of products.
• Solving challenging quantitative problems related to setting rates and valuations for structured products.
• Developing Monte-Carlo simulations on a large scale across several variables with relevant coefficients.
• Performing fast and accurate market risk measurements.
•  Conducting complex market and portfolio modeling and analysis of Pioneer’s power supply position to effectively monitoring exposure to adverse market changes.
• Coordinating and participating in Pioneer’s integrated resource planning process including providing analysis and input related to production cost modeling from the CPUC, CAISO, IOUs, and CalCCA.
• Creating and implementing measures to benchmark system implementations, enhancements, or modifications by providing documented system specifications, evaluating vendor proposals, and recommending appropriate course of action.
• Developing portfolio dashboard showing key metrics and risk positions.
• Using a variety of computer software programs to prepare reports, graphs and other materials related to energy resources, finance models and customer statistics.
• Maintaining liaison with regional resource planning or supply agencies; serving on Pioneer committees as required; evaluating proposals in terms of resource costs, availability and consistency with long-term financial projections and resource needs.

QUALIFICATIONS
Qualified candidates will have an ability to perform complex analytical work in support of Pioneer’s product structuring, resource planning activities and rate setting and apply analytical and research methods to a variety of electric utility program areas including planning, forecasting, load research, utility demand, and demand-side management.

Education:
Bachelor’s degree (B.A.) from four-year college or university in a quantitative discipline such as Engineering, Computer Science, Financial Engineering, or Economics.
Experience: Five to ten (plus) years of experience in a position with similar duties including programming expertise (e.g., C++, Python, R, Matlab).

COMPENSATION PACKAGE
Salary - The salary range is $115,934 - $173,322, with placement dependent on qualifications plus generous benefits

To be considered, submit an application, cover letter, resume, and three professional references to Shellie Anderson at Bryce Consulting. The recruitment is open until filled with the first screening October 30th. 

Shellie Anderson Bryce Consulting, Inc. 
1024 Iron Point Road, Suite 100 
Folsom, CA 95630
Tel: 916‐974‐0199 
Email: sanderson@bryceconsulting.com

For a detailed brochure and application, go to: https://pioneercommunityenergy.org/about-us/career-opportunities/

Located in Middletown, CA!

This position performs a variety of engineering tasks relating to plant reliability and performance efficiency, troubleshoots plant and equipment problems, leads plant based NERC/CIP reporting requirements, manages implementation of system/equipment repairs and upgrades, acts as project manager for a variety of plant efficiency upgrade and retrofit projects, acts as construction manager for a variety of projects including public works projects, assists in personnel training and scheduling of operations and maintenance functions. This position may also undertake special projects as assigned by and through the Plant Manager. The level of supervision will be dependent upon the incumbent’s classification level (Engineer II, III, IV, or V), but all levels will perform a variety of assigned complex technical and professional work.

ESSENTIAL DUTIES AND RESPONSIBILITIES

This position requires the incumbent reports for work on time and maintains satisfactory attendance in accordance with Agency policy; Ensures work responsibilities are covered when absent; Arrives to meetings and appointments on time; Performs special assignments for the Plant Manager or others as assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Level II:
This is the entry-level class within the Engineer series for an employee assigned to a Power Plant. Under supervision, employees perform a wide variety of fields and office engineering assignments within the work unit. Engineers as this level are expected to manage smaller projects with direct oversight.

Level III:
Employees at this level receive only general instruction or assistance as new, unusual, or unique situations arise and are fully aware of the operating procedures and policies within the work unit. Engineers at this level manage smaller projects with minimal direction. 

Level IV: 
This is the journey-level class within the engineer series. Working with minimal direction, employees at this level assist or lead capital projects, including project management, giving project assignments, reviewing work, providing guidance, and giving instruction to project personnel, including professional engineering staff, other staff, and contractors.   

Level V: 
This is the senior-level class within the engineering series. Working with minimal direction and often taking department goals and translating them into work assignments for individuals and other departments. Employees at this level manage the most complex projects. 

Responsibilities:

Level II:
Participates in the review and technical/economic analysis of new projects, and with the development of specifications, and negotiation of agreements with counterparties. Prepares periodic reports on progress and issues relating to the above.

Manages the covered piping system program and boiler code compliance. Perform inspections. Determine corrective actions. Oversee welding procedures and testing for code welds.

Manages the NERC Compliance Program for the project site.

Provides input to the Plant budget and Business Plan. 

Participates in the facility safety program.

Manages the plant drawing files, including updating files with as-built changes.

Prepares reports and makes oral presentations at public meetings.

Stay informed on industry events, technological advancements, and regulatory issues.

Performs other related duties as required.

Level III:
In addition to Level II class, this item:
 
Interfaces with plant staff to optimize plant output.

Provide specific support as needed to the Operations and Maintenance Supervisors, FOA and Materials Warehouse Coordinator.

Investigates and determines methods to improve performance and efficiency of power plant equipment and systems including turbine generators, condensers, pumps, cooling towers and heat exchangers, etc. and conducts engineering and economic analyses for consideration by the supervisor.

Stays abreast of electricity market conditions and communicates findings regularly to Plant Staff.

Develops technical specifications and assists with the development of equipment supply and construction contracts.

Provides on-site technical support for all DCS, Business Network, Historian and Communications Equipment.

Acts as a point of contact with the NCPA Generation Services Engineering Department and provides engineering assistance as requested.

Level IV:
In addition to Level III class, this item:

Develop commissioning and testing procedures as well as operations and maintenance procedures.

Participates in troubleshooting Plant equipment operating problems, performs “root cause” analyses and assists in the implementation of measures to prevent future problems.

Leads in the review and technical/economic analysis of new projects, and with development of specifications, negotiation of agreements with counter parties. Prepares periodic reports on progress and issues relating to the above.

During the development and engineering phase of projects this position will review, comment, modify and approve the plant designs as proposed by the Engineer of Record. Recommends purchase of equipment, and trains users to use new or modified equipment.

Acts as project manager on assigned projects which includes planning, interdepartmental coordination, budgeting, implementation, progress reporting, quality control, payment approval, etc.

Level V:
In addition to Level IV class, this item:

Maintains and communicates within the Generation Services Department up-to-date information on relevant trends and modern technologies in the field of Reliability and Plant Engineering. Analyzes the need for maintenance activities such as condition based, predictive, preventative, and scheduled. Participates in planning and scheduling maintenance activities.

During construction of projects this position provides management, coordination and quality assurance and control of various contractors. Coordinates and resolves problems with the Chief Building Official.

Regularly performs engineering systems calculations and analysis applicable to power plants, review and approval of engineering drawings and designs, coordinating with various contractors and the Chief Building Official to resolve problems during modifications and improvements. Provides support during the start-up and commissioning of the power plants or any related subsystems. Uses computer assisted engineering and design software and equipment to perform engineering tasks.

Steps into the Plant Manager or Operations and Maintenance Supervisor role from time to time.

MINIMUM QUALIFICATIONS  
Level II:
Education and/or Experience      
This level requires a bachelor’s degree in engineering (Mechanical or Electrical preferred) at an accredited four-year college or university; and a minimum of two (2) years of related experience in power plant/production engineering. A California Engineer-in-Training Certificate is desired.

Level III:
Education and/or Experience      
This level requires a bachelor’s degree in engineering (Mechanical or Electrical preferred) from an accredited four-year college or university is required; and a minimum of three (3) years in power plant/production engineering. At a minimum, have a California Engineer-in-Training (EIT) Certificate. A California Professional Engineering License is highly desirable.

Level IV: 
Education and/or Experience      
This level requires a bachelor’s degree in engineering (Mechanical or Electrical preferred) an accredited four-year college or university; and a minimum of five (5) years of related experience in power plant/production engineering. A California Professional Engineering License is highly desirable.

Level V:
Education and/or Experience      
This level requires a bachelor’s degree in engineering (Mechanical or Electrical preferred) an accredited four-year college or university; and a minimum of seven (7) years of related experience, preferably within a combined-cycle/steam-generating plant. A California Professional Engineering License is highly desirable.

KNOWLEDGE AND ABILITIES 

Knowledge:
Knowledge of power plant operations and plant design parameters; methods, materials and techniques used in the construction of geothermal power generating plant. General power plant safety principles and practices; Knowledge of local, state and federal regulations applicable to electric utility generator operators and generator owners; Knowledge of utility industry, generation practices, and new developments; Understanding of electric generation plant control systems; Good technical knowledge of electrical terminology and applications;  use and application of computer aided design software; Principles and practices of applicable ASME codes and standards; Principles of budget preparation and administration; Proficiency with MS Word and Excel;  Experience with MS PowerPoint, MS Project, MS SharePoint, OSIsoft PI, CMMS, AutoCAD, and relational databases (e.g. MS Access) is desirable; Demonstrated application of business and systems analysis techniques, SQL, client- server and web base technology, and report writing tools is also desirable; Requirements of Public Works Contracts including, Public Works bid process, roles and responsibilities of NCPA project manager versus contractor, bonding Public notices and registration requirements; project closure; NCPA leadership standards and expected leadership behaviors and considerable skill in verbal and written communications.

Abilities:
Observe and enforce NCPA safety procedures and to establish and maintain project priorities and to reason logically and creatively. Must develop and evaluate alternatives; analyze data and perform research work; analyze situations accurately and take effective action; communicate and negotiate effectively; prepare reports, correspondence, safety oversight plans, and exhibits; translate engineering calculations and analyses into concepts usable by decision-makers; Testify on results of completed studies; Consult with and advise administrators, decision-makers, and other interested parties on a broad range of subject-matter areas; serve as a lead person and gain and maintain the confidence and cooperation of those contacted during the course of work; Perform general plant performance calculations and engineering duties with minimum supervision; initiate, develop a variety of projects from concept to completion;  Develop technical specifications, drawings, and work scopes; Conduct bid walks and Safety orientations; Control project costs and report progress; Conduct post project reviews and consistently manage NCPA staff or contractors in pursuit of facility goals.

SPECIAL REQUIREMENTS

Valid California Driver's License and insurance, as travel by car to NCPA facilities is required.
Additional coursework or certifications in information technology would be helpful.

Engineer II- III has no supervisory responsibilities. 

Engineer IV may lead projects and function as interim supervisor as needed. 

Engineer V – Leads large-scale projects, may supervise other employees, and may function as interim plant manager as needed. 

While performing the duties of this job, the employee is frequently required to stand, sit; use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee is required to walk, climb or balance; stoop, kneel, crouch, or crawl and taste or smell. The employee must occasionally lift and/or move up to twenty-five (25) pounds. Specific vision abilities required by this job include close vision, distance vision, depth perception and ability to adjust focus.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this Job, the employee may be exposed to wet and/or humid conditions; moving mechanical parts; high, precarious places; outside weather conditions; extreme cold; extreme heat, and risk of electrical shock. The noise level in the work environment is usually loud.

All employees are responsible for contributing to an inclusive, safe, and secure work environment that values diverse cultures, perspectives, and experiences, and is free from discrimination.
 

Pioneer Community Energy Seeks a 
Senior Manager, Quantitative Analysis and Modeling

The Senior Manager, Quantitative Analysis and Modeling is responsible for organizing, assigning, reviewing and participating in the work of personnel engaged in professional duties related to analysis and modeling, structured product development, portfolio risk management, and integrated resource planning. Duties include:

• Planning, prioritizing, reviewing and participating in the performance of professional analysis and modeling of risk and value around complex transactions and portfolio positions, including structured products, rate analysis and development, and hedging strategies.
• Developing methods and schedules to accomplish assignments, ensuring work is completed in a timely and accurate manner.
• Developing pricing and calibration models for a variety of products.
• Solving challenging quantitative problems related to setting rates and valuations for structured products.
• Developing Monte-Carlo simulations on a large scale across several variables with relevant coefficients. 
• Performing fast and accurate market risk measurements.
• Conducting complex market and portfolio modeling and analysis of Pioneer’s power supply position to effectively monitor exposure to adverse market changes.
• Coordinating and participating in Pioneer’s integrated resource planning process including providing analysis and input related to production cost modeling from the CPUC, CAISO, IOUs, and CalCCA.
• Creating and implementing measures to benchmark system implementations, enhancements, or modifications by providing documented system specifications, evaluating vendor proposals, and recommending appropriate course of action.
• Developing portfolio dashboard showing key metrics and risk positions.
• Using a variety of computer software programs to prepare reports, graphs and other materials related to energy resources, finance models and customer statistics. 
• Maintaining liaison with regional resource planning or supply agencies; serving on Pioneer committees as required; evaluating proposals in terms of resource costs, availability and consistency with long-term financial projections and resource needs.

Qualified candidates will possess a knowledge of California energy industry and electric power markets including CAISO, CPUC, CEC, and CARB, energy/financial markets and quantitative investment approaches, advanced computer modeling of power supply system operation and cost analysis and have the ability to perform complex professional analytical work in support of a variety of Pioneer’s product structuring and resource planning activities. 

The salary range is $127,527-$190,654, with placement dependent on qualifications, plus generous benefits. A detailed recruitment brochure and application can be found at https://pioneercommunityenergy.org/about-us/career-opportunities/

Experience:
Ten years of experience in a position with similar duties. 

Training:
Bachelor’s degree from an accredited college or university with major course work in in a quantitative discipline such as Engineering, Computer Science, Financial Engineering, Economics, or related field.

To be considered, submit an application, cover letter, resume, and three professional references to Shellie Anderson at Bryce Consulting. The recruitment is open until filled with the first screening September 1, 2023.

Shellie Anderson, Bryce Consulting, Inc. 
1024 Iron Point Road, Suite 100 
Folsom, CA 95630
Tel: 916‐974‐0199 
Email: sanderson@bryceconsulting.com