Search Jobs

The City of Auburn is looking for an Associate Engineer to join our team!

WHAT YOU WILL DO

The incumbent will be a vital member of our team! With a focus on capital improvement projects, our Associate Engineer performs a variety of professional-level engineering work including development, CIP and other City plans regarding stormwater management, streets, transportation and public buildings.

The incumbent will work under general direction of the Public Works Director and may serve as a project manager on assigned projects. This position reviews plans, designs and specs of public works projects and recommends changes for compliance; as well as responds to questions and inquiries from the general public, developers, contractors, engineering professionals and City staff regarding engineering and development projects.

Visit our website to learn more about our department and current projects:

• https://www.auburn.ca.gov/183/Engineering

REPRESENTATIVE DUTIES

The following duties are typical for this classification. Incumbents may not perform all of the listed duties and/or may be required to perform additional or different duties from those set forth below to address business needs and changing business practices.

• Perform a full range of professional level engineering duties in support of the City’s public works engineering projects, services, and activities including design and construction programs for City streets, storm drains, sewer lines, traffic, and related capital improvement programs.
• Perform plan check, review, and processing of plans for projects affecting City streets, sewers, drains, and related public works facilities; review engineering design and construction plans, drawings, specifications, contract documents, cost estimates, engineering calculations, and related documents prepared by consulting engineers and contractors for compliance with professional and City standards and practices; coordinate reviews with other departments and agencies.
• Prepare designs and specifications for assigned projects; develop engineering drawings, construction plans, specifications, contract documents, bid documents, calculations, and cost estimates for proposed projects; research project design requirements; prepare estimates of time and material costs.
• Act as the resident engineer on construction projects; administer contracts for assigned engineering projects; conduct site inspections during and at completion of project; monitor construction progress and changes to scope of work; discuss and recommend change orders; review and process requests for contract and final payments; prepare project close-out documents.
• Investigate field conditions related to public improvements, public utilities, and traffic safety operations; investigate field problems affecting property owners, contractors, and maintenance operations; work with public or private contractors on public improvements.
• Maintain accurate records of projects, budgets, or field observations required for the delivery of civil engineering services for the City.
• Prepare special engineering studies and reports.
• Perform survey, mapping, and data collection; evaluate data and prepare recommendations.
• Perform in-depth review of grading and improvement plans, parcel and subdivision maps, and all other miscellaneous maps to ensure compliance with regional standards and Subdivision Map Act; review legal descriptions and exhibits for lien, easement, and vacation documents to ensure accuracy.
• Perform a variety of traffic engineering studies; review development plans and make recommendations regarding compliance of traffic control plans with regional standards and practices; monitor traffic patterns and analyze traffic accident reports; make recommendations regarding required public improvements and their compliance with regional standards and practices.
• Provide assistance to contractors, engineers, and the general public on engineering policies and procedures; review submitted plans, drawings, and specifications for compliance with engineering and City codes and standards.
• Provide supervision and training to assigned staff.
• Serve as staff to a variety of City commissions, boards, and committees related to public works engineering matters.
• Coordinate public works activities with other City departments, divisions, and outside agencies.
• Attend and participate in professional group meetings; stay abreast of new trends and innovations in the field of civil engineering design and construction management.
• Perform related duties as required.

KNOWLEDGE, SKILLS AND ABILITIES

The following generally describes the knowledge and ability required to enter the job and/or be learned within a short period of time in order to successfully perform the assigned duties.

Knowledge of:  Operations, services, and activities of a municipal engineering design and construction program; modern and complex principles and practices of civil engineering; principles and practices of traffic engineering; structural, street, and highway design principles; scientific and mathematical principles as applied to civil engineering work; principles and practices of project management and administration; methods and techniques of contract negotiations and administration; principles and practices of project budget preparation and control; methods, materials, and techniques used in civil engineering projects including those used in the design and construction of development projects; mechanics and properties of materials; methods and techniques of engineering plan review and analysis; methods and techniques of conducting site and field investigation; principles and practices of field surveying including topographic and construction surveying; drafting methods, techniques, and equipment including those used in computer aided drafting; engineering maps and records; recent developments, current literature, and sources of information related to innovations and trends in civil and traffic engineering design and development; principles and practices of business correspondence and technical report preparation; modern office procedures, methods, and equipment including computers and supporting word processing, spreadsheet applications, and specialized engineering software programs; principles and practices of geographic information systems programs; occupational health and safety standards; pertinent federal, state, and local codes, laws, and regulations; basic principles of supervision, training and performance evaluation.

Ability to:  Perform the full range of professional level engineering duties involved in the design, development, and construction management of a variety of construction/capital improvement projects; serve as project engineer on assigned design and construction projects; prepare, review, interpret, analyze, and modify engineering plans, drawings, specifications, contract documents, and engineering reports for conformance to professional standards and approved budgets; collect, assimilate, and evaluate data and prepare recommendations related to civil engineering projects; perform complex engineering computations and calculations; prepare bid documents, contract documents, specifications, cost estimates and engineering drawings; inspect public works projects for conformance with plans and specifications; administer change orders and contract laws; prepare clear and concise administrative and technical reports; interpret, apply, and ensure compliance with pertinent federal, state, and local laws, codes, and regulations; interpret, explain and enforce department policies and procedures; oversee the work of assigned staff, professional consultants, and contractors; respond to questions and inquiries from a variety of sources regarding engineering and development projects; research, review, update, and revise existing ordinances, policies, and design standards; conduct analytical traffic studies accurately and reliably; coordinate activities with internal and external agencies and committees; use and care for engineering, surveying, and drafting instruments and equipment; communicate clearly and concisely, both orally and in writing; establish and maintain effective working relationships with those contacted in the course of work.

PHYSICAL DEMANDS AND WORKING ENVIRONMENT

The conditions herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions.

Environment: Standard office setting with some travel to conduct site investigations; occasional exposure to outside weather conditions; incumbents may be required to work extended hours including evenings and weekends and may be required to travel outside City boundaries to attend meetings.

Physical: Primary functions require sufficient physical ability to work in an office setting and operate office equipment; ability to operate a vehicle to travel to various locations and meetings.

Vision: See in the normal visual range with or without correction; vision sufficient to read computer screens and printed documents.

Hearing: Hear in the normal audio range with or without correction.

THE POSITION

Under general direction, supervises, evaluates, plans and participates in the day-to-day operations of the City’s wastewater treatment plant and facilities as well as the water system and infrastructure; assists in the preparation and administration of the division budget; evaluates and trains assigned staff; interfaces with and coordinates assigned functions with other City services and departments; represents wastewater treatment plant and water system operations with governmental regulatory agencies; ensures work quality and accuracy and safe work practices; serves as a technical resource for assigned work crews and the department Director; performs other management related duties as required. 

DISTINGUISING CHARACTERISTICS:

The Utilities Superintendent is part of the mid-management level class responsible for assigning and supervising the day-to-day operation, development, repair and maintenance of the City’s wastewater treatment plant and facilities as well as the water system and infrastructure. The incumbent is expected to perform the full scope of duties. This classification is distinguished from the higher classification of Director in that the latter is responsible for the overall management and supervision of the Department. FLSA status – exempt.

TO VIEW JOB ANNOUNCEMENT, CLICK JOB PDF OR JOB ANNOUNCEMENT URL BELOW.

The position is responsible for the performance of both the day-to-day power settlements among NCPA members, Western, California, and Federal electricity markets, local balancing authority area operators (CAISO, BANC, EIM), as well as settlement activities associated with NCPA Power Management’s Service Customers. Other responsibilities include tracking and meter data management validation duties, GHG (Greenhouse Gas) monitoring and analysis, analysis and testing associated with new CAISO market initiatives, and comprehensive analytic or technical studies, as required, including proceedings before state and federal regulatory agencies and public officials. This is a full journey-level position capable of performing all the duties and responsibilities of the Settlements Analyst I. Performs the full range of duties as assigned, receiving only occasional instruction, training, or assistance as new or unusual situations arise. Additionally, incumbents perform a variety of assigned complex technical and professional work in the areas of power accounts settlements, budgeting, systems development, and audit. Incumbents also provide technical analysis and assistance to staff, Members, contractual participants, and others, as required.

ESSENTIAL DUTIES AND RESPONSIBILITIES
This position requires that the incumbent report for work on time and maintain satisfactory attendance in accordance with Agency policy; Ensures work responsibilities are covered when absent; Arrives to meetings and appointments on time; Performs special assignments as assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.

Responsibilities:
Provides technical advice, functional instruction, and guidance to less experienced Power Settlement staff as needed. Trains new Power Settlements Analysts and cross trains as roles evolve. Recommends personnel actions. Prepares and presents training/tutorials on All Resources Bill, Pre-Bill process, Power Settlement processes overall, and various other topics, as needed, in person or via webinars (s) to NCPA Members and Project Participant staff.

Serves as subject matter expert, working with Information Services, on Power Settlements application requirements, such as All Resources Bill enhancements, and testing system enhancements in development.

Implements and operates complicated power settlements systems. Prepares complex analytical reports and supporting documentation.

Provides analysis, integration, and implementation of new energy market initiatives and/or customers/Scheduling Coordination accounts (e.g., ISO, Western Energy Imbalance Market (“EIM”), renewable generating resources, Community Choice Energy/Aggregators (“CCE”).

Monitors settlements associated with Renewable Energy Credits and acts as or provides support to NCPA’s Qualified Reporting Entity representative; registers credits on the Western Renewable Energy Generation Information System (“WREGIS”) or its successor.

Monitors settlements functions of Western capacity and energy allocations, market purchases and sales, Pool transmission activity, and other transactions as they occur; Prepares or reviews power settlement transactions for proper budget classification.

Conducts special studies requiring complex, voluminous, and detailed analysis of power costs and revenues. Recommends operational changes that provide better value to Members and Participants.

Coordinates and participates in the development, analysis, and monitoring of the Agency's power supply budgets. Acts as power settlements representative to other department managers and supervisors in regard to cost summary and budgetary reports.

Assists with the implementation of systems, policies, and procedures and special projects requiring highly technical study and analyses. Recommends changes or modifications to methods or systems as applicable.

Assists with formal budget and other presentations to upper management and the governing body.
Performs special assignments for the Power Settlements Supervisor or others as assigned, including preparation of testimony and exhibits for presentation before state and national regulatory proceedings.

MINIMUM QUALIFICATIONS

Education and/or Experience
Bachelor's degree (B. A.) from a four-year college or university with an emphasis on quantitative analysis, plus four (4) years of prior experience as a Power Settlements Analyst I or an equivalent combination of education and experience.

KNOWLEDGE AND ABILITIES 
Knowledge:
Knowledge of California Independent System Operator settlements procedures for tariff services and Metered Subsystem services; NCPA settlements procedures for scheduling coordinator services and the ten-member power pool; California Energy Imbalance Markets; NCPA’s Western (WAPA) contracts
California’s Green House Gas rules; CARB renewable energy credits; Knowledge of NCPA settlements procedures for scheduling coordinator services and the ten-member power pool.

Abilities:
Ability to retrieve detailed records and summary-level data from NCPA’s Oracle database systems through the use of Structured Query Language (“SQL”) statements in proprietary software (e.g., SAS, Toad, SQL Developer, Oracle Database Connection [“ODBC”]) and process through proprietary or open-source software programming applications (e.g., SAS, Visual Basic for Applications [“VBA”], R, Python, Excel workbooks); Ability to read, analyze, and interpret CAISO tariff, NCPA operating agreements, and contracts, standard industry power purchase agreements, technical procedures, and governmental regulations; Ability to write reports, business correspondence, and procedure manuals; Ability to present information effectively and respond to questions from groups of managers, clients, customers, and the general public; and the Ability to analyze and interpret settlement formulas expressed in summation notation.

SPECIAL REQUIREMENTS

Valid California Driver's License and insurance. 

This job has no supervisory responsibilities.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is frequently required to stand; sit; use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee is occasionally required to walk; climb or balance; stoop, kneel, crouch, or crawl, and taste or smell. The employee must occasionally lift and/or move up to 10 pounds. Specific vision abilities required by this job include close vision, distance vision, depth perception, and the ability to adjust focus.

The noise level in the work environment is usually moderate.

All employees are responsible for contributing to an inclusive, safe, and secure work environment that values diverse cultures, perspectives, and experiences and is free from discrimination.
 

Located in Middletown, CA!

This position performs a variety of engineering tasks relating to plant reliability and performance efficiency, troubleshoots plant and equipment problems and responsible for the collection, processing and interpretation of production, thermodynamic, geologic and geophysical data necessary to recommend actions to maximize steam production and plant generation. This position may also undertake special projects as assigned by and through the Plant Manager. The level of supervision will be dependent upon the incumbent’s classification level (Engineer III, IV, or V) but all levels will perform a variety of assigned complex technical and professional work.

ESSENTIAL DUTIES AND RESPONSIBILITIES

This position requires the incumbent reports for work on time and maintains satisfactory attendance in accordance with Agency policy; Ensures work responsibilities are covered when absent; Arrives to meetings and appointments on time; Performs special assignments for the Plant Manager or others as assigned.  Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Level III:
Employees at this level receive only general instruction or assistance as new, unusual or unique situations arise and are fully aware of the operating procedures and policies within the work unit.  Engineers at this level are expected to manage smaller projects with minimal direction. 

Level IV:
This is the journey person level class within the Engineer series. Working with minimal direction, employees at this level perform the projects and troubleshooting assignments. May lead capital projects including prioritizing work, giving project assignments, directing and reviewing work, and providing guidance and instruction to project personnel including professional engineering staff, other staff and contractors. 

Level V:
This the senior level class within the Engineering series. Working with minimal direction often taking plant goals and translating them into work assignments for the individual and in many cases other departments. Employees at this level are given the most complex projects (many cases maybe multi- year, many different disciplines of work, large contracts) and complex trouble shooting.

Responsibilities: 

Level III:
Interfaces with plant staff to optimize plant output.

Estimates forward projection of steam supplies and generation of the geothermal field.

Evaluates the effects of injection within the field and makes injection recommendations based on the available tracer, MEQ, and reservoir data.

Recommends pipeline and control system design changes necessary to increase system operating efficiencies.

Reduces operating expenses in conjunction with the business unit goals and budget.  

Develops and uses databases to perform analysis of plant generation and production including predictions of reservoir reserves, forward projections for generation and production, and impact analysis of future projects both within the existing site and the analysis of any investment possibilities.

Acts as a point of contact with the NCPA Generation Services Engineering Department and provides engineering assistance as requested.

Level IV:
In addition to Level III class, this item;

Assists in the preparation of engineering solutions for problems related to production, generation and transmission.

Communicates with staff, management, technical committees, commission, and regulators through memos, meetings, and reports.

Assists in making injection recommendations to maximize the recovery of injection-derived-steam.

Develops conceptual models of the reservoir, prepares estimates of field reserves and forecasts of future production and generation and related reports, as needed.
Initiates, develops and presents annual Steam Field budget.
Prepares and submits reservoir maps based on well flowrate, pressure, gas and tracer data.

Initiates and approves requisitions and invoices, tracks cost and insures projects are cost­ effective.

Acts as project manager on assigned projects which includes planning, interdepartmental coordination, budgeting, implementation, progress reporting, quality control, payment approval, etc.

Level V:
In addition to Level IV class, this item;

Sets standards of performance for direct reports, provides coaching and development opportunities, and assesses performance.

Gathers and interprets the necessary information to comply with permits from the Bureau of Land Management, Regional Water Quality Control Board, and Air Quality Management District(s) for all drilling, workover, conversion to injection and well abandonment programs. 

Prepares and submits required periodic operations reports.

Represents Agency on the Effluent Committee, Geothermal Resources Council and Geysers Geothermal Association.

Analyzes and interprets wireline logs including, but not limited to: PT, PTS and Casing Caliper logs.

Coordinates with other staff at the NCPA Geothermal facility and others in providing steam field engineering support.

Develops and utilizes computerized databases to analyze generation and production in support of engineering solutions and recommendations.

Maintains good working relationship with regulators including Federal Bureau of Land Management, California Department of Conservation (DOGGR), Sonoma County Air Quality Management District, Lake County Air Quality Management District, etc.

May be called upon to step into the Plant Manager or Operations and Maintenance Supervisor role from time to time.

EDUCATION AND/OR EXPERIENCE      

Level III:
Bachelor’s Degree in Engineering (Mechanical or Electrical preferred) from an accredited four-year college or university is required; and a minimum of three (3) years in power plant/production engineering.  A minimum California Engineer-in-Training Certificate is required. A California Professional Engineering License is highly desirable and in some cases a requirement.

Level IV:
This level requires a Bachelor’s degree in Engineering (Mechanical or Electrical preferred) an accredited four-year college or university; and a minimum of five (5) years related experience in power plant/production engineering.  A California Professional Engineering License is highly desirable and in some cases a requirement. 

Level V: 
This level requires a Bachelor’s degree in Engineering (Mechanical or Electrical preferred) plus a Master’s degree in reservoir engineering from an accredited four-year college or university; and a minimum of six (6) years related experience preferably within a steamfield reservoir generating plant.  A California Professional Engineering License is highly desirable and in some cases a requirement.

KNOWLEDGE AND ABILITIES 

Knowledge:                                                                                                                                                            Knowledge of power plant operations and plant design parameters; methods, materials and techniques used in making engineering evaluations on the performance of the physical reservoir processes including but not limited to volumetric voidage calculations, water frontal advance maps, water percentage versus cumulative production curves, injectivity and production capabilities, together with other secondary recovery methods; General power plant safety principles and practices; Knowledge of local, state and federal regulations applicable to electric utility generator operators and generator owners; Knowledge of utility industry, generation practices, and new developments; Use and application of computer aided design software; Principles and practices of applicable ASME codes and standards; Principles of budget preparation and administration; Proficiency with MS Word and Excel;  Experience with MS PowerPoint, MS Project, MS SharePoint, OSIsoft PI, CMMS, AutoCAD, and relational databases (e.g. MS Access) is desirable; Demonstrated application of business and systems analysis techniques, SQL, client- server and web base technology, and report writing tools is also desirable; Requirements of Public Works Contracts including, Public Works bid process, roles and responsibilities of NCPA project manager versus contractor, bonding Public notices and registration requirements; project closure; NCPA leadership standards and expected leadership behaviors and considerable skill in verbal and written communications.
In addition, requires knowledge of California Public Utilities Code and General Orders; trends, issues, State and Federal requirements, and basic court decisions affecting public utilities and transportation regulation; knowledge of engineering terminology, fundamentals, mathematics, and economics; financial structure and prescribed accounting classifications; knowledge of standards of service, reliability, and safety; materials and methods of engineering construction; procedures of conducting hearings before the California Public Utilities Commission and other regulatory agencies.

Abilities:
Observe and enforce NCPA safety procedures and to establish and maintain project priorities and to reason logically and creatively.  Must develop and evaluate alternatives; analyze data and perform research work; analyze situations accurately and take effective action; communicate and negotiate effectively; prepare reports, correspondence, safety oversight plans, and exhibits; translate engineering calculations and analyses into concepts usable by decision-makers; testify on results of completed studies; consult with and advise administrators, decision-makers, and other interested parties on a broad range of subject-matter areas; serve as a lead person and gain and maintain the confidence and cooperation of those contacted during the course of work; utilize complex computer operations, intermediate to advanced programming, relational databases, and operating systems, and advanced features of software packages (word processing, spreadsheet, graphics, customized products, etc.); control project costs and report progress; conduct post project reviews and consistently manage NCPA staff or contractors in pursuit of facility goals.

SPECIAL REQUIREMENTS

Professional Engineer license is highly desirable, and in some cases is a requirement.

Valid California Driver's License and insurance, as travel by car to NCPA facilities is required.
Additional coursework or certifications in information technology are helpful.

The Reservoir Engineer III has no supervisory responsibilities.

The Reservoir Engineer IV may be called upon to lead projects and may act as interim supervisor as needed. 

The Reservoir Engineer V supervises projects i.e. (drilling, wireline, reservoir upgrades) and may supervise other staff including student interns and lower level engineers on rotational assignments.   

While performing the duties of this job, the employee is frequently required to stand; sit; use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee is occasionally required to walk; climb or balance; stoop, kneel, crouch, or crawl and taste or smell. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, depth perception and ability to adjust focus.
 

This position is open until filled. The first review of applications is January 31, 2024.

*Effective July 2024, this position will receive a 2.5% base salary increase.

THE POSITION

Reporting to the Director of Administrative Services, the Management Analyst (Risk Management) provides professional support to risk management programs including: workers' compensation, safety compliance, review and approval of contracts and Certificates of Insurance, risk transfer, and leave and disability administration. 

In addition, you will have the opportunity to coordinate and oversee workers' compensation claims management including monitoring accepted claims and providing information to claimants, attorneys, and the workers' compensation carrier. You will also serve as a consultant to City departments and employees on Risk Management (workers' compensation, safety, contract insurance) problems and communicate regularly with internal and external parties to maximize the effectiveness and efficiency of assigned programs and activities, minimize risk, and advise of claim developments. This position will also support the City's leave management program.

To view the entire job description, click here.

ABOUT YOU

We are looking for a solution-focused problem solver who is responsive to organizational needs and open to new ideas and approaches to deliver HR services. Additionally, our ideal candidate will:

• Have a demonstrated ability to manage and organize multiple HR projects and priorities. 
• Understand and apply principles and practices of being an HR Business Partner.
• Have a strategic perspective and the ability to see the long-term impact of projects and initiatives.
• Be an outstanding communicator with exceptional interpersonal, analytical, written, verbal communication, and presentation skills.
• Proven technical skills and the desire to be a generalist in the HR functional areas assigned.

MINIMUM REQUIREMENTS

Possession of a bachelor's degree with major coursework in public or business administration, finance, human resources, economics, or a closely related field;

AND

Three (3) years of increasingly responsible professional experience performing public administration, finance, housing, or human resources functions; or

One (1) year of experience at a level equivalent to the City’s class of Associate Management Analyst or Administrative Analyst.

When assigned to a specific functional area as noted above, additional knowledge and experience in such area may be desirable.

Public sector experience is preferred.

Licenses and Certifications

• Possession of, or ability to obtain and maintain, a valid California Class C Driver's License and a satisfactory driving record is required. Individuals who do not meet this requirement due to a disability will be reviewed on a case-by-case basis. 

This position performs a wide variety of responsible bookkeeping and clerical duties under general supervision and within a framework of established procedures. Perform a large amount of the daily bookkeeping and administrative work associated with accounts payable, accounts receivable, the general ledger, cash & investments, internal credit card claim processing, and support services administration.  Assist in the preparation of participant and third-party power billings, and fuel-steam and other allocations. Monitor the collection of accounts receivable. 

ESSENTIAL DUTIES AND RESPONSIBILITIES
This position requires the incumbent reports for work on time and maintains satisfactory attendance in accordance with Agency policy; Ensures work responsibilities are covered when absent; Arrives to meetings and appointments on time; Performs special assignments for the Treasurer-Controller or others as assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Accounting Clerk I:
Perform full cycle accounts payable processing to include: creation and maintenance of vendor files; verification of invoices, including quantities, dollar amounts, and payment and discount terms; matching and cross-referencing invoices to receiving documents, requisitions, purchase orders, contracts, and shipping documents, reconciling with vendor statements, and ensuring timely payment to vendors.

Track, monitor, and process electronic purchase order files, including invoices,  payments, open purchase orders, work orders, partial payments, and other information as required to expedite and document accounts payable transactions. Resolve exceptions through contact and coordination with appropriate vendor and Agency purchasing officials.

Assist in t in the maintenance of subsidiary accounts payable ledgers, fixed asset records, accounts receivable, work order and related systems and reconcile to the general ledger.  

Assist with reconciling cash accounts and documents to Agency records. Responsible for the distribution of recurring reports

Review and process employee advances, expense reports, and credit card transactions in accordance with Agency policy and procedures.

Provide administrative support for NCPA’s Support and Shared Services Programs, including review and verification of insurance terms, confirming insurance is up-to-date, and entering into appropriate tracking tool.  

Process, review and route invoices to Member(s) for approval for payment; submission of invoices to accounting for payment. Upload various documents into electronic database program SharePoint.

Communicate effectively with internal and external partners and respond to inquiries in a timely manner and provide internal and external support services-related assistance to various cross functional partners. 

Compose, format, edit, and type routine correspondence, prepare Commission Staff reports and monthly Support Services report as assigned. Prepare annual report for the General Manager and Chief Executive Officer and other required reports as assigned. 

May include coordination with the Southern California Public Power Authority (SCPPA) for an efficient process for Shared Services to NCPA Members who use SCPPA contracts. Inspect, read, edit, and verify documents and assess data

Accounting Clerk II:
In addition to the duties for the level I class, this level:

Maintaining the Agency's general ledgers and subsidiary ledgers and in preparation of recurring journal entries, audit schedules, account analyses, and special data requests. Assist and instruct new clerical employees as required.  

Maintain subsidiary accounts payable ledgers, fixed asset records, accounts receivable, work order and related systems and reconcile to the general ledger. Maintain the Agency's general ledgers and subsidiary ledgers and in preparation of recurring journal entries, audit schedules, account analyses, and special data requests. Assist and instruct new clerical employees as required.

Provide support to Treasurer. Track cash activity, update wire, and cash schedules daily, including ACH and wire transfer origination, check run initiation, vendor book transfers, upload of positive pay files, and weekly cash requirements forecasting. In addition, input investments, interest, bank sweep activity into investment management software and compile monthly Treasurer’s Report. Track, balance, and report transactions between various funds with high level of accuracy and a high level of attention to detail.  

Maintain and reconcile cash accounts and documents to Agency records. Coordinate and resolve related matters with outside entities, managers, supervisors, and or employees as applicable. Also responsible for the distribution of recurring reports.

MINIMUM QUALIFICATIONS

Education and/or Experience      

Accounting Clerk I:
This level requires a minimum of a high school diploma supplemented with college-level training in business or a related field and a minimum of two years of experience performing similar job responsibilities. An associate of art degree from an accredited college with major coursework in accounting or a related field is preferred.  

Accounting Clerk II:        
This level requires a minimum of a high school diploma supplemented with college-level training in business or a related field and a minimum of four years of experience performing similar job responsibilities with minimal supervision. An associate of art degree from an accredited college with major coursework in accounting or a related field is preferred.  

KNOWLEDGE AND ABILITIES 
Knowledge:
Knowledge of generally accepted accounting practices and principles, including accounts payable and receivable, journal entries and ledgers, cash management practices, account reconciliation, and purchasing; Knowledge of business English and correspondence, Microsoft Office, including Word, Excel, PowerPoint, and Outlook, and possess strong organizational and time-management skills, and the knowledge of manual and computerized accounting systems and practices. 

Abilities:
Ability to be detail-oriented and work with a high level of accuracy; Listen to, read, and comprehend instructions, short correspondence, and memos and ask for clarification when necessary; Ability to effectively present information in one-on-one and small group situations to clients and other employees of the organization in writing and in person and to speak clearly and persuasively; Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals; Compute rate, ratio, and percent and to draw and interpret bar graphs and apply mathematical concepts to accounting transactions; and the ability to deal with problems involving several concrete variables in standardized situations.

SPECIAL REQUIREMENTS

Valid California Driver's License and insurance. 

While performing the duties of this job, the employee is regularly required to sit. The employee is occasionally required to stand and walk. The employee must regularly lift and /or move up to 10 pounds. 

This job has no supervisory responsibilities.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The noise level in the work environment is usually moderate.

All employees are responsible for contributing to an inclusive, safe, and secure work environment that values diverse cultures, perspectives, and experiences and is free from discrimination.
 

Senior Civil & Environmental Engineer
Salary Range: $95,900/yr. - $189,900/yr. (Budgeted salary range $95,900/yr. - $142,900/yr.) 
 

Apply by Date: 1/6/2024  Applicants will be screened after two weeks; and then on a weekly basis. The position can be filled prior to the removal date.

Use advanced engineering concepts and organizational objectives to provide leadership and support focused on engineering, project management, and compliance for the Facilities Management: Utilities department. Work with individual Utilities system managers to evaluate system performance and provide technical leadership for deferred maintenance and capital improvement projects. Conduct master planning for future capacity needs. Conduct system assessments to improve the design of physical plant systems. Lead civil system compliance efforts. Regularly work on highly complex issues where analysis of situations or data requires an in-depth evaluation of variable factors.

MINIMUM QUALIFICATIONS
Minimum License/Certification:

• Current registration as a Professional Engineer in the State of California.

Minimum Education/Experience:

• Bachelor’s degree in Engineering from an accredited program, preferably in one of the following disciplines: Civil or Environmental.
• Over ten years of experience in engineering design, master planning, plan review, project administration and facility operation in storm, water, water reuse, sanitary sewer and solid waste systems.
• Extensive experience with interpreting regulations, permitting, and regulatory compliance for water, wastewater, and solid waste operations.

PREFERRED QUALIFICATIONS
Preferred Education/Experience:  

• Experience with Capital Improvement Project (CIP) budgeting and with developing sewer, water and treatment plant master plan documents and condition assessments.
• Experience with water and wastewater system maintenance; understanding of Enterprise Asset Management System (EAMS) principles.

Preferred Knowledge, Skills, and Abilities (KSA):

• Ability to work in a highly collaborative manner with excellent customer service skills; ability to readily assess complex challenges and barriers and recommend effective resolutions.
• Advanced communication skills, both written and verbal, to convey complex information in a clear and concise manner.
• Advanced project management skills needed to assume responsibility for both high quality and timely accomplishment of design and construction projects.
• Advanced interpersonal and presentation skills. Demonstrated ability to lead, motivate and influence others.

SPECIAL REQUIREMENTS
Background Check
This position is a critical position and subject to a background check. Employment is contingent upon successful completion of background investigation including criminal history and identity checks.

To view full job description and submit an on-line application visit UC Davis Career Opportunities at 
http://50.73.55.13/counter.php?id=273432
Job ID # 61720

The University of California, Davis is an Affirmative Action/Equal Opportunity Employer
 

TO VIEW JOB ANNOUNCEMENT, CLICK JOB PDF OR JOB ANNOUNCEMENT URL BELOW.

Located in Middletown, CA!

This position performs a variety of engineering tasks relating to plant reliability and performance efficiency, troubleshoots plant and equipment problems, leads plant based NERC/CIP reporting requirements, manages implementation of system/equipment repairs and upgrades, acts as project manager for a variety of plant efficiency upgrade and retrofit projects, acts as construction manager for a variety of projects including public works projects, assists in personnel training and scheduling of operations and maintenance functions. This position may also undertake special projects as assigned by and through the Plant Manager. The level of supervision will be dependent upon the incumbent’s classification level (Engineer II, III, IV, or V), but all levels will perform a variety of assigned complex technical and professional work.

ESSENTIAL DUTIES AND RESPONSIBILITIES

This position requires the incumbent reports for work on time and maintains satisfactory attendance in accordance with Agency policy; Ensures work responsibilities are covered when absent; Arrives to meetings and appointments on time; Performs special assignments for the Plant Manager or others as assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Level II:
This is the entry-level class within the Engineer series for an employee assigned to a Power Plant. Under supervision, employees perform a wide variety of fields and office engineering assignments within the work unit. Engineers as this level are expected to manage smaller projects with direct oversight.

Level III:
Employees at this level receive only general instruction or assistance as new, unusual, or unique situations arise and are fully aware of the operating procedures and policies within the work unit. Engineers at this level manage smaller projects with minimal direction. 

Level IV: 
This is the journey-level class within the engineer series. Working with minimal direction, employees at this level assist or lead capital projects, including project management, giving project assignments, reviewing work, providing guidance, and giving instruction to project personnel, including professional engineering staff, other staff, and contractors.   

Level V: 
This is the senior-level class within the engineering series. Working with minimal direction and often taking department goals and translating them into work assignments for individuals and other departments. Employees at this level manage the most complex projects. 

Responsibilities:

Level II:
Participates in the review and technical/economic analysis of new projects, and with the development of specifications, and negotiation of agreements with counterparties. Prepares periodic reports on progress and issues relating to the above.

Manages the covered piping system program and boiler code compliance. Perform inspections. Determine corrective actions. Oversee welding procedures and testing for code welds.

Manages the NERC Compliance Program for the project site.

Provides input to the Plant budget and Business Plan. 

Participates in the facility safety program.

Manages the plant drawing files, including updating files with as-built changes.

Prepares reports and makes oral presentations at public meetings.

Stay informed on industry events, technological advancements, and regulatory issues.

Performs other related duties as required.

Level III:
In addition to Level II class, this item:
 
Interfaces with plant staff to optimize plant output.

Provide specific support as needed to the Operations and Maintenance Supervisors, FOA and Materials Warehouse Coordinator.

Investigates and determines methods to improve performance and efficiency of power plant equipment and systems including turbine generators, condensers, pumps, cooling towers and heat exchangers, etc. and conducts engineering and economic analyses for consideration by the supervisor.

Stays abreast of electricity market conditions and communicates findings regularly to Plant Staff.

Develops technical specifications and assists with the development of equipment supply and construction contracts.

Provides on-site technical support for all DCS, Business Network, Historian and Communications Equipment.

Acts as a point of contact with the NCPA Generation Services Engineering Department and provides engineering assistance as requested.

Level IV:
In addition to Level III class, this item:

Develop commissioning and testing procedures as well as operations and maintenance procedures.

Participates in troubleshooting Plant equipment operating problems, performs “root cause” analyses and assists in the implementation of measures to prevent future problems.

Leads in the review and technical/economic analysis of new projects, and with development of specifications, negotiation of agreements with counter parties. Prepares periodic reports on progress and issues relating to the above.

During the development and engineering phase of projects this position will review, comment, modify and approve the plant designs as proposed by the Engineer of Record. Recommends purchase of equipment, and trains users to use new or modified equipment.

Acts as project manager on assigned projects which includes planning, interdepartmental coordination, budgeting, implementation, progress reporting, quality control, payment approval, etc.

Level V:
In addition to Level IV class, this item:

Maintains and communicates within the Generation Services Department up-to-date information on relevant trends and modern technologies in the field of Reliability and Plant Engineering. Analyzes the need for maintenance activities such as condition based, predictive, preventative, and scheduled. Participates in planning and scheduling maintenance activities.

During construction of projects this position provides management, coordination and quality assurance and control of various contractors. Coordinates and resolves problems with the Chief Building Official.

Regularly performs engineering systems calculations and analysis applicable to power plants, review and approval of engineering drawings and designs, coordinating with various contractors and the Chief Building Official to resolve problems during modifications and improvements. Provides support during the start-up and commissioning of the power plants or any related subsystems. Uses computer assisted engineering and design software and equipment to perform engineering tasks.

Steps into the Plant Manager or Operations and Maintenance Supervisor role from time to time.

MINIMUM QUALIFICATIONS  
Level II:
Education and/or Experience      
This level requires a bachelor’s degree in engineering (Mechanical or Electrical preferred) at an accredited four-year college or university; and a minimum of two (2) years of related experience in power plant/production engineering. A California Engineer-in-Training Certificate is desired.

Level III:
Education and/or Experience      
This level requires a bachelor’s degree in engineering (Mechanical or Electrical preferred) from an accredited four-year college or university is required; and a minimum of three (3) years in power plant/production engineering. At a minimum, have a California Engineer-in-Training (EIT) Certificate. A California Professional Engineering License is highly desirable.

Level IV: 
Education and/or Experience      
This level requires a bachelor’s degree in engineering (Mechanical or Electrical preferred) an accredited four-year college or university; and a minimum of five (5) years of related experience in power plant/production engineering. A California Professional Engineering License is highly desirable.

Level V:
Education and/or Experience      
This level requires a bachelor’s degree in engineering (Mechanical or Electrical preferred) an accredited four-year college or university; and a minimum of seven (7) years of related experience, preferably within a combined-cycle/steam-generating plant. A California Professional Engineering License is highly desirable.

KNOWLEDGE AND ABILITIES 

Knowledge:
Knowledge of power plant operations and plant design parameters; methods, materials and techniques used in the construction of geothermal power generating plant. General power plant safety principles and practices; Knowledge of local, state and federal regulations applicable to electric utility generator operators and generator owners; Knowledge of utility industry, generation practices, and new developments; Understanding of electric generation plant control systems; Good technical knowledge of electrical terminology and applications;  use and application of computer aided design software; Principles and practices of applicable ASME codes and standards; Principles of budget preparation and administration; Proficiency with MS Word and Excel;  Experience with MS PowerPoint, MS Project, MS SharePoint, OSIsoft PI, CMMS, AutoCAD, and relational databases (e.g. MS Access) is desirable; Demonstrated application of business and systems analysis techniques, SQL, client- server and web base technology, and report writing tools is also desirable; Requirements of Public Works Contracts including, Public Works bid process, roles and responsibilities of NCPA project manager versus contractor, bonding Public notices and registration requirements; project closure; NCPA leadership standards and expected leadership behaviors and considerable skill in verbal and written communications.

Abilities:
Observe and enforce NCPA safety procedures and to establish and maintain project priorities and to reason logically and creatively. Must develop and evaluate alternatives; analyze data and perform research work; analyze situations accurately and take effective action; communicate and negotiate effectively; prepare reports, correspondence, safety oversight plans, and exhibits; translate engineering calculations and analyses into concepts usable by decision-makers; Testify on results of completed studies; Consult with and advise administrators, decision-makers, and other interested parties on a broad range of subject-matter areas; serve as a lead person and gain and maintain the confidence and cooperation of those contacted during the course of work; Perform general plant performance calculations and engineering duties with minimum supervision; initiate, develop a variety of projects from concept to completion;  Develop technical specifications, drawings, and work scopes; Conduct bid walks and Safety orientations; Control project costs and report progress; Conduct post project reviews and consistently manage NCPA staff or contractors in pursuit of facility goals.

SPECIAL REQUIREMENTS

Valid California Driver's License and insurance, as travel by car to NCPA facilities is required.
Additional coursework or certifications in information technology would be helpful.

Engineer II- III has no supervisory responsibilities. 

Engineer IV may lead projects and function as interim supervisor as needed. 

Engineer V – Leads large-scale projects, may supervise other employees, and may function as interim plant manager as needed. 

While performing the duties of this job, the employee is frequently required to stand, sit; use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee is required to walk, climb or balance; stoop, kneel, crouch, or crawl and taste or smell. The employee must occasionally lift and/or move up to twenty-five (25) pounds. Specific vision abilities required by this job include close vision, distance vision, depth perception and ability to adjust focus.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this Job, the employee may be exposed to wet and/or humid conditions; moving mechanical parts; high, precarious places; outside weather conditions; extreme cold; extreme heat, and risk of electrical shock. The noise level in the work environment is usually loud.

All employees are responsible for contributing to an inclusive, safe, and secure work environment that values diverse cultures, perspectives, and experiences, and is free from discrimination.
 

The City of Lincoln is hiring a Civil Engineer!

We are accepting applications to fill a new Engineer* position in the Engineering Department.  The incumbent will be part of a team of seven working on the City's capital engineering projects.  The position will be filled at any level of the Civil Engineer classification series, dependent upon candidate qualifications.  The salary ranges for each class level are as follows:

• Assistant Engineer:  $71,433.01 to $95,727.06
• Associate Engineer:  $91,440.05 to $122,538.42
• Senior Engineer:  $103,684.96 to $138,947.76

*Please Note: This is an extension of the previous recruitment that was advertised on August 10, 2023. If you previously applied for this position, you do not need to reapply.

DISTINGUISHING CHARACTERISTICS

The Assistant Engineer is the entry level class in the professional civil engineering series and is responsible for performing the professional engineering work not requiring registration as a Civil Engineer. This classification is distinguished from the next higher classification of Associate Civil Engineer in that the latter performs the more complex and difficult assignments within the division.

The Associate Engineer is the journey level class in the professional civil engineering series and is responsible for performing the more complex design and construction of capital improvement projects and for reviewing private development projects for design conformance and accuracy. Incumbents perform complex professional engineering assignments requiring considerable knowledge of various aspects of civil engineering including land development, planning, design standards and regulations, construction and maintenance. This classification is distinguished from the next higher classification of Senior Civil Engineer in that the latter performs the most complex and difficult assignments within the division and may exercise direct supervision over assigned project staff.

The Senior Civil Engineer is an advanced journey level registered professional engineer class and exercises full responsibility for planning and organizing a variety of assigned engineering projects and directing the work of assigned staff. Incumbents perform complex professional engineering and program management assignments demanding considerable knowledge of various aspects of engineering and related program requirements including land development, planning, design standards and regulations, construction and maintenance. This classification is distinguished from the Associate Civil Engineer by the level of accountability expected in the performance of the most complex and difficult assignments, and the performance of program management responsibilities.

SUPERVISION RECEIVED/EXERCISED

This position receives direction from the Engineering Manager, and may receive direction from a Senior Engineer, and the City Engineer.  Associate and Senior Engineers may exercise direct supervision over professional and technical support staff and staff augmentation consultants.

ESSENTIAL FUNCTIONS

May include, but are not limited to the following:

Assistant Engineer

• Performs professional engineering work not requiring registration as a Civil Engineer.
• On a continuous basis, know and understand all aspects of the job.
• Intermittently analyze work papers, reports and special projects.
• Identify and interpret technical and numerical information.
• Observe and problem solve operational situations and technical policies and procedures.
• Explain regulations and procedures to consultants, contractors, developers, the general public, and representatives of other public agencies and other City staff.
• Prepare and check engineering plans and specifications, and engineering reports and studies.
• Understand City engineering policies and procedures, applicable laws and regulatory codes applicable to areas of assigned responsibility, including design, construction, land development, transportation and traffic planning, surveying and mapping, solid waste and landfill operations, storm control and flood control engineering.
• Prepare accurate cost estimates and/or budgets, project schedules, and personnel resources needed for project completion/program accomplishment.
• Prepare effective technical reports with recommendations and finds.
• Work with various and aids in coordinating capital improvement projects with contractors, utility companies and other departments and agencies; in the predevelopment project review process; develops and recommends conditions of approval for projects and conditions for development agreements; aids in plan check services for developers and contractors to ensure compliance with city improvement standards; processes lot line adjustments, ROW abandonments, easement and grant deed dedications.
• Prepares and provides complex engineering reports, correspondence, staff reports, ordinances, and resolutions to the City Manager, City Council, committees, City departments, outside agencies and the public; develops and reports statistics; coordinates storm water and groundwater monitoring and reporting; prepares long range storm water master plans; oversees and performs design and maintenance of geographic information systems; reviews and comments on environmental impact reports and traffic studies; makes oral presentations and participates in organizational and community group meetings;  responds to questions and inquiries, and investigates complaints concerning engineering problems.
• Aids in overseeing the design and development of public works and utility structures and the preparation of project specifications; aids in reviewing plans submitted by consultants and developers to ensure conformity with established standards and regulations.
• Establishes positive working relationships with representatives of community organizations, state/local agencies, City management and staff, and the public.

Associate Engineer

• Performs and oversees a broad range of design activities on a variety of public works projects including street, storm drains, sewers, buildings, airports and other public facilities; oversees the administration of construction contracts; performs field inspections; determines design procedures; prepares plans, specifications, project budget and cost estimates; interprets the application of design criteria; checks plans and specifications for accuracy of design and completeness; makes recommendations and monitors the approved project budgets.
• Coordinates capital improvement projects with contractors, utility companies and other departments and agencies; participates in the predevelopment project review process; develops and recommends conditions of approval for projects and conditions for development agreements; provides plan check services for developers and contractors to ensure compliance with city improvement standards; processes lot line adjustments, ROW abandonments, easement and grant deed dedications.
• Prepares and provides complex engineering reports, correspondence, staff reports, ordinances, and resolutions to the City Manager, City Council, committees, City departments, outside agencies and the public; develops and reports statistics; coordinates storm water and groundwater monitoring and reporting; prepares long range storm water master plans;; reviews and comments on environmental impact reports and traffic studies; makes oral presentations and participates in organizational and community group meetings; responds to questions and inquiries, and investigates complaints concerning engineering problems.
• Oversees the design and development of public works and utility structures and the preparation of project specifications; consults with contractors; reviews plans submitted by consultants and developers to ensure conformity with established standards and regulations; assists in providing advice and instruction to subordinates on design standards and problems from the construction phase to completion of the project; reviews and processes progress payments; prepares, reviews and recommends change orders.
• Establishes positive working relationships with representatives of community organizations, state/local agencies, City management and staff, and the public.

Senior Engineer

• Performs a broad range of design/project management activities on a variety of public works projects, including street, landscaping, storm drainage facilities, sanitary sewer facilities, parks, water production and distribution facilities and buildings; performs site inspections; develops design procedures; prepare plans, specifications, project budget and cost estimates; interprets the application of design criteria; checks plans and specifications for accuracy of design and completeness.
• Manages, develops and coordinates assigned program activities such as industrial waste ordinance management, grease trap enforcement, and other City Municipal Code-related activities, including policy development, community education, regional and state program coordination and required infrastructure modifications; recommend program activity budgets.
• Monitors work activities to ensure safe work practices, work quality and accuracy; ensures compliance to applicable rules, policies and procedures; participates in the development of policies and procedures; recommends programs, projects and work assignments to higher level engineering personnel.
• Assists in the coordination of capital improvement projects with contractors, utility companies and other agencies; administers construction contracts; plans, coordinates, prioritizes, monitors and participates in the work of staff responsible for reviewing design conformance and accuracy of public and private development projects.
• Prepares and provides complex engineering and program reports, correspondence, staff reports, ordinances and resolutions at the direction of the Engineering Manager, or the City Engineer; develops and reports statistics; makes oral presentations and participates in organizational and community group meetings; responds to questions and inquiries, and investigates complaints concerning engineering problems.
• Manages the design and development of public works and utility structures and the preparation of project specifications; consults with contractors; reviews plans submitted by consultants and developers to ensure conformity with established standards and regulations; provides advice and instruction to subordinates on design standards and problems from design inception through the construction phase to completion of the project; provides supervision of field work; prepares, reviews and recommends change orders.
• Manages the engineering aspects of private development projects from pre-application through entitlement approval, through plan review and final map approval, and reviews proposed revisions through the construction phase; supervise, review and participate in preparation of environmental assessments and studies, specific plans, and general development plans, financing plans and Development Agreements; manage and review traffic impact analyses, hydrology studies, storm water quality plans, drainage, sewer, and water master plans, improvement plans, final maps and other technical documents; meet with developers to discuss the proposed project or resolve design issues; manage the annexation of territory into the special districts and assist in the formation of special districts (CFDs, Landscaping & Lighting Assessment Districts, Benefit Assessment Districts).
• Participate in budget preparation and administration; prepare cost estimates for budget recommendations; submit justifications for services, labor, materials and related resources for public works and utilities projects and/or programs; monitor and control expenditures.
• Monitors and keeps informed of current trends in the field of municipal engineering, including legislation, court ruling and professional practices and techniques; evaluates their impact and recommend policy and procedural modifications accordingly.
• Establishes positive working relationships with representatives of community organizations, state/local agencies and associations, City management and staff and the public.

PHYSICAL, MENTAL AND ENVIRONMENTAL WORKING CONDITIONS

Position requires sitting, standing, walking on level and slippery surfaces, reaching, twisting, turning, kneeling, bending, stooping, squatting, crouching, grasping, crawling and making repetitive hand movement in the performance of daily duties.  The position also requires repetitive hand movement and fine coordination in preparing reports using a computer keyboard.  Additionally, the position requires both near and far vision in reading written reports and work related documents. Acute hearing is required when providing phone and personal service.  Additionally, the incumbent in this position works outdoors in all weather conditions, including wet, hot and cold.  The position entails working in situations that may expose the employee to fumes or airborne particles, electrical shock or mechanical hazards.  The nature of the work also requires the incumbent to drive motorized vehicles. The need to lift, drag and push files, paper and documents weighing up to 25 pounds is also required.

KNOWLEDGE/SKILLS/ABILITIES

The following are a representative sample of the KSA’s necessary to perform essential duties of the position.

Knowledge of: Principles, procedures, practices and standards of municipal civil engineering; surveying methods and techniques; strength of materials and stress analysis; municipal engineering laws, ordinances, codes, specifications and plans; engineering project inspection methods; modern developments, current literature and sources of information regarding engineering; principles and practices of contract administration; operational characteristics and use of standard equipment used in the engineering profession; methods and techniques of supervision, training and motivation; basic principles of mathematics; applicable federal, state and local laws, codes, and regulations including City, county and state building codes; methods and techniques of scheduling work assignments; standard office procedures, practices and equipment; modern office equipment including a computer and applicable software; methods and techniques for record keeping and report preparation and writing; proper English, spelling and grammar; occupational hazards and standard safety practices.

Ability to: Perform complex engineering computations; check, design and supervise the preparation of engineering plans and studies; plan, organize, direct and evaluate the effectiveness of assigned program activities; effectively exercise supervisory control over complex professional and technical tasks; negotiate and manage construction contracts; perform the full range of professional civil engineering tasks; prepare and administer a budget; safely and effectively operate engineering tools and equipment; interpret, explain and apply applicable laws, codes and regulations pertaining to municipal public works design and construction; make adjustments to standard operating procedures to improve effectiveness and comply with regulatory changes as appropriate; read, interpret and record data accurately; organize, prioritize and follow-up on work assignments; work independently and as part of a team; make sound decisions within established guidelines; analyze a complex issue, and develop and implement an appropriate response; follow written and oral directions; promote and observe safety principles and work in a safe manner; communicate clearly and concisely, both orally and in writing; establish and maintain effective working relationships.

Skill to: Operate an office computer and a variety of word processing and software applications, including graphic and presentation programs. 

THE SELECTION PROCESS

The process may include an in-basket exercise, individual interviews, panel interviews and/or other related components.  Only those candidates who have the best combination of qualifications in relation to the requirements and duties of the position will continue in the selection process. The candidate selected for the position will be required to complete a background check including reference checks, fingerprint check, medical exam, drug-screening and/or other related components.

Human Resources will make reasonable efforts in the examination process to accommodate persons with disabilities. Please advise Human Resources of any special needs a minimum of five days in advance of the selection process exam by calling (916) 434-3229 or emailing hr@lincolnca.gov. The City of Lincoln is an Equal Opportunity Employer.

The information contained herein is subject to change and does not constitute either an expressed or implied contract.