Search Jobs

HIRING INCENTIVES

• Up to $5,000 signing bonus after 6 months successful performance**
• 40 hours sick leave upon hire
• 40 hours vacation upon hire
• Relocation Assistance may be available

About the Position: 

Yuba County is currently accepting applications for the position of Building Inspector II/III. Currently we are hiring to fill at a Building Inspector III level within the Building Department and establish an eligibility list for the level II position.

The Building Inspector II position is flexibly staffed and is normally filled by advancement from the entry level Building Inspector I.  Incumbents which meet the minimum qualifications and demonstrate the ability to perform the responsibilities required at the higher performance level are promoted to the level II position. 

Building Inspector III is a stand alone position which performs complex, difficult and/or lead inspections and provides direction and technical expertise to staff.

Qualifications:   

Building Inspector II: Under limited supervision, this is the working level in this class series, fully qualified to independently perform diverse inspections. This is the journey level in the building inspection series

Building Inspector III: This position reports directly to the Supervising Building Official. Acts as a lead inspector providing direction and technical expertise to staff and performs related work as assigned. This is the advanced journey level in the building inspection series

Building Inspector II:

• Perform inspections, investigation, code interpretations, permit application intake, review and permit issuance, including record keeping and case management.  Also learn and apply zoning, land use, fire-safe and water quality related regulations.
• Inspect new and existing properties, and other building and construction elements for conformance to codes, regulations, plans, specifications and standards related for foundations, framing, electrical, plumbing and other structural and functional elements.
• Confer with and provide information to developers, engineers, architects, property owners and others regarding code requirements and alternative and County policies and procedures whenever possible, resolve complaints and problems, maintain close verbal and written contact regarding progress with the complainants.
• Lead inspections for non-residential commercial and industrial projects, new and existing.
• Perform above duties with limited supervision.
• Provide information to senior staff to prepare case violations for hearing; testify in court as required.

Building Inspector III (In addition to the above):

• Provide lead direction, training and work review to professional and technical staff; organize and assign work accordingly, set priorities and follow-up to ensure coordination and completion of assigned work; provide input into performance evaluation.
• Perform complex and difficult in nature assignments; respond to highly sensitive, complete or technical complaints; validate the nature of the complaint and recommend solutions.
• Independently perform the full range of the Building Inspector I/II duties.
• Implement new or modified policies and procedures and train/develop other staff as required.
• Make presentations to groups and coordinate public meetings.

**Signing Bonus Qualification Criteria:

• First Installment of $2,500, the candidate must apply, qualify for and be hired (e.g. first time appointment) by CDSA.
• Second Installment of $2,500, the recently hired employee must successfully complete six months of County service (achieving a "meets standards" or above on the six-month performance evaluation).

The position is responsible for the performance of both the day-to-day power settlements among NCPA members, Western, California, and Federal electricity markets, local balancing authority area operators (CAISO, BANC, EIM), as well as settlement activities associated with NCPA Power Management’s Service Customers. Other responsibilities include tracking and meter data management validation duties, GHG (Greenhouse Gas) monitoring and analysis, analysis and testing associated with new CAISO market initiatives, and comprehensive analytic or technical studies, as required, including proceedings before state and federal regulatory agencies and public officials. This is a full journey-level position capable of performing all the duties and responsibilities of the Settlements Analyst I. Performs the full range of duties as assigned, receiving only occasional instruction, training, or assistance as new or unusual situations arise. Additionally, incumbents perform a variety of assigned complex technical and professional work in the areas of power accounts settlements, budgeting, systems development, and audit. Incumbents also provide technical analysis and assistance to staff, Members, contractual participants, and others, as required.

ESSENTIAL DUTIES AND RESPONSIBILITIES
This position requires that the incumbent report for work on time and maintain satisfactory attendance in accordance with Agency policy; Ensures work responsibilities are covered when absent; Arrives to meetings and appointments on time; Performs special assignments as assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.

Responsibilities:
Provides technical advice, functional instruction, and guidance to less experienced Power Settlement staff as needed. Trains new Power Settlements Analysts and cross trains as roles evolve. Recommends personnel actions. Prepares and presents training/tutorials on All Resources Bill, Pre-Bill process, Power Settlement processes overall, and various other topics, as needed, in person or via webinars (s) to NCPA Members and Project Participant staff.

Serves as subject matter expert, working with Information Services, on Power Settlements application requirements, such as All Resources Bill enhancements, and testing system enhancements in development.

Implements and operates complicated power settlements systems. Prepares complex analytical reports and supporting documentation.

Provides analysis, integration, and implementation of new energy market initiatives and/or customers/Scheduling Coordination accounts (e.g., ISO, Western Energy Imbalance Market (“EIM”), renewable generating resources, Community Choice Energy/Aggregators (“CCE”).

Monitors settlements associated with Renewable Energy Credits and acts as or provides support to NCPA’s Qualified Reporting Entity representative; registers credits on the Western Renewable Energy Generation Information System (“WREGIS”) or its successor.

Monitors settlements functions of Western capacity and energy allocations, market purchases and sales, Pool transmission activity, and other transactions as they occur; Prepares or reviews power settlement transactions for proper budget classification.

Conducts special studies requiring complex, voluminous, and detailed analysis of power costs and revenues. Recommends operational changes that provide better value to Members and Participants.

Coordinates and participates in the development, analysis, and monitoring of the Agency's power supply budgets. Acts as power settlements representative to other department managers and supervisors in regard to cost summary and budgetary reports.

Assists with the implementation of systems, policies, and procedures and special projects requiring highly technical study and analyses. Recommends changes or modifications to methods or systems as applicable.

Assists with formal budget and other presentations to upper management and the governing body.
Performs special assignments for the Power Settlements Supervisor or others as assigned, including preparation of testimony and exhibits for presentation before state and national regulatory proceedings.

MINIMUM QUALIFICATIONS

Education and/or Experience
Bachelor's degree (B. A.) from a four-year college or university with an emphasis on quantitative analysis, plus four (4) years of prior experience as a Power Settlements Analyst I or an equivalent combination of education and experience.

KNOWLEDGE AND ABILITIES 
Knowledge:
Knowledge of California Independent System Operator settlements procedures for tariff services and Metered Subsystem services; NCPA settlements procedures for scheduling coordinator services and the ten-member power pool; California Energy Imbalance Markets; NCPA’s Western (WAPA) contracts
California’s Green House Gas rules; CARB renewable energy credits; Knowledge of NCPA settlements procedures for scheduling coordinator services and the ten-member power pool.

Abilities:
Ability to retrieve detailed records and summary-level data from NCPA’s Oracle database systems through the use of Structured Query Language (“SQL”) statements in proprietary software (e.g., SAS, Toad, SQL Developer, Oracle Database Connection [“ODBC”]) and process through proprietary or open-source software programming applications (e.g., SAS, Visual Basic for Applications [“VBA”], R, Python, Excel workbooks); Ability to read, analyze, and interpret CAISO tariff, NCPA operating agreements, and contracts, standard industry power purchase agreements, technical procedures, and governmental regulations; Ability to write reports, business correspondence, and procedure manuals; Ability to present information effectively and respond to questions from groups of managers, clients, customers, and the general public; and the Ability to analyze and interpret settlement formulas expressed in summation notation.

SPECIAL REQUIREMENTS

Valid California Driver's License and insurance. 

This job has no supervisory responsibilities.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is frequently required to stand; sit; use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee is occasionally required to walk; climb or balance; stoop, kneel, crouch, or crawl, and taste or smell. The employee must occasionally lift and/or move up to 10 pounds. Specific vision abilities required by this job include close vision, distance vision, depth perception, and the ability to adjust focus.

The noise level in the work environment is usually moderate.

All employees are responsible for contributing to an inclusive, safe, and secure work environment that values diverse cultures, perspectives, and experiences and is free from discrimination.
 

Located in Middletown, CA!

This position performs a variety of engineering tasks relating to plant reliability and performance efficiency, troubleshoots plant and equipment problems and responsible for the collection, processing and interpretation of production, thermodynamic, geologic and geophysical data necessary to recommend actions to maximize steam production and plant generation. This position may also undertake special projects as assigned by and through the Plant Manager. The level of supervision will be dependent upon the incumbent’s classification level (Engineer III, IV, or V) but all levels will perform a variety of assigned complex technical and professional work.

ESSENTIAL DUTIES AND RESPONSIBILITIES

This position requires the incumbent reports for work on time and maintains satisfactory attendance in accordance with Agency policy; Ensures work responsibilities are covered when absent; Arrives to meetings and appointments on time; Performs special assignments for the Plant Manager or others as assigned.  Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Level III:
Employees at this level receive only general instruction or assistance as new, unusual or unique situations arise and are fully aware of the operating procedures and policies within the work unit.  Engineers at this level are expected to manage smaller projects with minimal direction. 

Level IV:
This is the journey person level class within the Engineer series. Working with minimal direction, employees at this level perform the projects and troubleshooting assignments. May lead capital projects including prioritizing work, giving project assignments, directing and reviewing work, and providing guidance and instruction to project personnel including professional engineering staff, other staff and contractors. 

Level V:
This the senior level class within the Engineering series. Working with minimal direction often taking plant goals and translating them into work assignments for the individual and in many cases other departments. Employees at this level are given the most complex projects (many cases maybe multi- year, many different disciplines of work, large contracts) and complex trouble shooting.

Responsibilities: 

Level III:
Interfaces with plant staff to optimize plant output.

Estimates forward projection of steam supplies and generation of the geothermal field.

Evaluates the effects of injection within the field and makes injection recommendations based on the available tracer, MEQ, and reservoir data.

Recommends pipeline and control system design changes necessary to increase system operating efficiencies.

Reduces operating expenses in conjunction with the business unit goals and budget.  

Develops and uses databases to perform analysis of plant generation and production including predictions of reservoir reserves, forward projections for generation and production, and impact analysis of future projects both within the existing site and the analysis of any investment possibilities.

Acts as a point of contact with the NCPA Generation Services Engineering Department and provides engineering assistance as requested.

Level IV:
In addition to Level III class, this item;

Assists in the preparation of engineering solutions for problems related to production, generation and transmission.

Communicates with staff, management, technical committees, commission, and regulators through memos, meetings, and reports.

Assists in making injection recommendations to maximize the recovery of injection-derived-steam.

Develops conceptual models of the reservoir, prepares estimates of field reserves and forecasts of future production and generation and related reports, as needed.
Initiates, develops and presents annual Steam Field budget.
Prepares and submits reservoir maps based on well flowrate, pressure, gas and tracer data.

Initiates and approves requisitions and invoices, tracks cost and insures projects are cost­ effective.

Acts as project manager on assigned projects which includes planning, interdepartmental coordination, budgeting, implementation, progress reporting, quality control, payment approval, etc.

Level V:
In addition to Level IV class, this item;

Sets standards of performance for direct reports, provides coaching and development opportunities, and assesses performance.

Gathers and interprets the necessary information to comply with permits from the Bureau of Land Management, Regional Water Quality Control Board, and Air Quality Management District(s) for all drilling, workover, conversion to injection and well abandonment programs. 

Prepares and submits required periodic operations reports.

Represents Agency on the Effluent Committee, Geothermal Resources Council and Geysers Geothermal Association.

Analyzes and interprets wireline logs including, but not limited to: PT, PTS and Casing Caliper logs.

Coordinates with other staff at the NCPA Geothermal facility and others in providing steam field engineering support.

Develops and utilizes computerized databases to analyze generation and production in support of engineering solutions and recommendations.

Maintains good working relationship with regulators including Federal Bureau of Land Management, California Department of Conservation (DOGGR), Sonoma County Air Quality Management District, Lake County Air Quality Management District, etc.

May be called upon to step into the Plant Manager or Operations and Maintenance Supervisor role from time to time.

EDUCATION AND/OR EXPERIENCE      

Level III:
Bachelor’s Degree in Engineering (Mechanical or Electrical preferred) from an accredited four-year college or university is required; and a minimum of three (3) years in power plant/production engineering.  A minimum California Engineer-in-Training Certificate is required. A California Professional Engineering License is highly desirable and in some cases a requirement.

Level IV:
This level requires a Bachelor’s degree in Engineering (Mechanical or Electrical preferred) an accredited four-year college or university; and a minimum of five (5) years related experience in power plant/production engineering.  A California Professional Engineering License is highly desirable and in some cases a requirement. 

Level V: 
This level requires a Bachelor’s degree in Engineering (Mechanical or Electrical preferred) plus a Master’s degree in reservoir engineering from an accredited four-year college or university; and a minimum of six (6) years related experience preferably within a steamfield reservoir generating plant.  A California Professional Engineering License is highly desirable and in some cases a requirement.

KNOWLEDGE AND ABILITIES 

Knowledge:                                                                                                                                                            Knowledge of power plant operations and plant design parameters; methods, materials and techniques used in making engineering evaluations on the performance of the physical reservoir processes including but not limited to volumetric voidage calculations, water frontal advance maps, water percentage versus cumulative production curves, injectivity and production capabilities, together with other secondary recovery methods; General power plant safety principles and practices; Knowledge of local, state and federal regulations applicable to electric utility generator operators and generator owners; Knowledge of utility industry, generation practices, and new developments; Use and application of computer aided design software; Principles and practices of applicable ASME codes and standards; Principles of budget preparation and administration; Proficiency with MS Word and Excel;  Experience with MS PowerPoint, MS Project, MS SharePoint, OSIsoft PI, CMMS, AutoCAD, and relational databases (e.g. MS Access) is desirable; Demonstrated application of business and systems analysis techniques, SQL, client- server and web base technology, and report writing tools is also desirable; Requirements of Public Works Contracts including, Public Works bid process, roles and responsibilities of NCPA project manager versus contractor, bonding Public notices and registration requirements; project closure; NCPA leadership standards and expected leadership behaviors and considerable skill in verbal and written communications.
In addition, requires knowledge of California Public Utilities Code and General Orders; trends, issues, State and Federal requirements, and basic court decisions affecting public utilities and transportation regulation; knowledge of engineering terminology, fundamentals, mathematics, and economics; financial structure and prescribed accounting classifications; knowledge of standards of service, reliability, and safety; materials and methods of engineering construction; procedures of conducting hearings before the California Public Utilities Commission and other regulatory agencies.

Abilities:
Observe and enforce NCPA safety procedures and to establish and maintain project priorities and to reason logically and creatively.  Must develop and evaluate alternatives; analyze data and perform research work; analyze situations accurately and take effective action; communicate and negotiate effectively; prepare reports, correspondence, safety oversight plans, and exhibits; translate engineering calculations and analyses into concepts usable by decision-makers; testify on results of completed studies; consult with and advise administrators, decision-makers, and other interested parties on a broad range of subject-matter areas; serve as a lead person and gain and maintain the confidence and cooperation of those contacted during the course of work; utilize complex computer operations, intermediate to advanced programming, relational databases, and operating systems, and advanced features of software packages (word processing, spreadsheet, graphics, customized products, etc.); control project costs and report progress; conduct post project reviews and consistently manage NCPA staff or contractors in pursuit of facility goals.

SPECIAL REQUIREMENTS

Professional Engineer license is highly desirable, and in some cases is a requirement.

Valid California Driver's License and insurance, as travel by car to NCPA facilities is required.
Additional coursework or certifications in information technology are helpful.

The Reservoir Engineer III has no supervisory responsibilities.

The Reservoir Engineer IV may be called upon to lead projects and may act as interim supervisor as needed. 

The Reservoir Engineer V supervises projects i.e. (drilling, wireline, reservoir upgrades) and may supervise other staff including student interns and lower level engineers on rotational assignments.   

While performing the duties of this job, the employee is frequently required to stand; sit; use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee is occasionally required to walk; climb or balance; stoop, kneel, crouch, or crawl and taste or smell. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, depth perception and ability to adjust focus.
 

This position performs a wide variety of responsible bookkeeping and clerical duties under general supervision and within a framework of established procedures. Perform a large amount of the daily bookkeeping and administrative work associated with accounts payable, accounts receivable, the general ledger, cash & investments, internal credit card claim processing, and support services administration.  Assist in the preparation of participant and third-party power billings, and fuel-steam and other allocations. Monitor the collection of accounts receivable. 

ESSENTIAL DUTIES AND RESPONSIBILITIES
This position requires the incumbent reports for work on time and maintains satisfactory attendance in accordance with Agency policy; Ensures work responsibilities are covered when absent; Arrives to meetings and appointments on time; Performs special assignments for the Treasurer-Controller or others as assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Accounting Clerk I:
Perform full cycle accounts payable processing to include: creation and maintenance of vendor files; verification of invoices, including quantities, dollar amounts, and payment and discount terms; matching and cross-referencing invoices to receiving documents, requisitions, purchase orders, contracts, and shipping documents, reconciling with vendor statements, and ensuring timely payment to vendors.

Track, monitor, and process electronic purchase order files, including invoices,  payments, open purchase orders, work orders, partial payments, and other information as required to expedite and document accounts payable transactions. Resolve exceptions through contact and coordination with appropriate vendor and Agency purchasing officials.

Assist in t in the maintenance of subsidiary accounts payable ledgers, fixed asset records, accounts receivable, work order and related systems and reconcile to the general ledger.  

Assist with reconciling cash accounts and documents to Agency records. Responsible for the distribution of recurring reports

Review and process employee advances, expense reports, and credit card transactions in accordance with Agency policy and procedures.

Provide administrative support for NCPA’s Support and Shared Services Programs, including review and verification of insurance terms, confirming insurance is up-to-date, and entering into appropriate tracking tool.  

Process, review and route invoices to Member(s) for approval for payment; submission of invoices to accounting for payment. Upload various documents into electronic database program SharePoint.

Communicate effectively with internal and external partners and respond to inquiries in a timely manner and provide internal and external support services-related assistance to various cross functional partners. 

Compose, format, edit, and type routine correspondence, prepare Commission Staff reports and monthly Support Services report as assigned. Prepare annual report for the General Manager and Chief Executive Officer and other required reports as assigned. 

May include coordination with the Southern California Public Power Authority (SCPPA) for an efficient process for Shared Services to NCPA Members who use SCPPA contracts. Inspect, read, edit, and verify documents and assess data

Accounting Clerk II:
In addition to the duties for the level I class, this level:

Maintaining the Agency's general ledgers and subsidiary ledgers and in preparation of recurring journal entries, audit schedules, account analyses, and special data requests. Assist and instruct new clerical employees as required.  

Maintain subsidiary accounts payable ledgers, fixed asset records, accounts receivable, work order and related systems and reconcile to the general ledger. Maintain the Agency's general ledgers and subsidiary ledgers and in preparation of recurring journal entries, audit schedules, account analyses, and special data requests. Assist and instruct new clerical employees as required.

Provide support to Treasurer. Track cash activity, update wire, and cash schedules daily, including ACH and wire transfer origination, check run initiation, vendor book transfers, upload of positive pay files, and weekly cash requirements forecasting. In addition, input investments, interest, bank sweep activity into investment management software and compile monthly Treasurer’s Report. Track, balance, and report transactions between various funds with high level of accuracy and a high level of attention to detail.  

Maintain and reconcile cash accounts and documents to Agency records. Coordinate and resolve related matters with outside entities, managers, supervisors, and or employees as applicable. Also responsible for the distribution of recurring reports.

MINIMUM QUALIFICATIONS

Education and/or Experience      

Accounting Clerk I:
This level requires a minimum of a high school diploma supplemented with college-level training in business or a related field and a minimum of two years of experience performing similar job responsibilities. An associate of art degree from an accredited college with major coursework in accounting or a related field is preferred.  

Accounting Clerk II:        
This level requires a minimum of a high school diploma supplemented with college-level training in business or a related field and a minimum of four years of experience performing similar job responsibilities with minimal supervision. An associate of art degree from an accredited college with major coursework in accounting or a related field is preferred.  

KNOWLEDGE AND ABILITIES 
Knowledge:
Knowledge of generally accepted accounting practices and principles, including accounts payable and receivable, journal entries and ledgers, cash management practices, account reconciliation, and purchasing; Knowledge of business English and correspondence, Microsoft Office, including Word, Excel, PowerPoint, and Outlook, and possess strong organizational and time-management skills, and the knowledge of manual and computerized accounting systems and practices. 

Abilities:
Ability to be detail-oriented and work with a high level of accuracy; Listen to, read, and comprehend instructions, short correspondence, and memos and ask for clarification when necessary; Ability to effectively present information in one-on-one and small group situations to clients and other employees of the organization in writing and in person and to speak clearly and persuasively; Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals; Compute rate, ratio, and percent and to draw and interpret bar graphs and apply mathematical concepts to accounting transactions; and the ability to deal with problems involving several concrete variables in standardized situations.

SPECIAL REQUIREMENTS

Valid California Driver's License and insurance. 

While performing the duties of this job, the employee is regularly required to sit. The employee is occasionally required to stand and walk. The employee must regularly lift and /or move up to 10 pounds. 

This job has no supervisory responsibilities.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The noise level in the work environment is usually moderate.

All employees are responsible for contributing to an inclusive, safe, and secure work environment that values diverse cultures, perspectives, and experiences and is free from discrimination.
 

The City of Belmont is currently recruiting for a Building Inspector I/II (level appointed will depend on qualifications) in the Community Development Department - Permit Center. We are seeking an energetic, enthusiastic and customer-oriented individual who will receive direction from the Cheif Building Official.

The Building Inspector I/II performs building, plumbing, electrical and mechanical inspections for the City enforcing all applicable laws and codes; performs plan checks on residential, commercial and industrial buildings; issues building permits; and performs a variety of technical tasks relative to assigned area of responsibility.

Compensation

Building Inspector I salary range: Step 1 $7,869.28 - Step 6 $9,565.16

Building Inspector II salary range: Step 1 $8,347.13 - Step 6 $10,145.99

3% salary increase July 1, 2024

Examples of Essential Duties

Building Inspector I/II

• Perform building inspections of existing and new structures for all local and state building requirements; investigate code related citizen complaints and building code violations
• Review plans and specifications for minor building permits; discuss code and project related questions; provide guidance to citizens; address and resolve concerns and complaints
• Check plans, specifications and calculations of proposed structures within the City for code compliance.
• Issue certificates of occupancy after approving structures and installations,
  conduct a final inspection of completed work
• Inspect structures for determination of substandard, unsafe conditions or health hazards
• Perform related duties and responsibilities as required

Qualifications

Building Inspector I/II

(Including but not limited to)

Knowledge of -

• Applicable provisions of all local, State and Federal codes, laws and ordinances including California Building Code, California Electric Code, California Plumbing Code, and California Mechanical Code
• Accepted safety standards and methods of building instruction
• Principles, methods and techniques of building inspection
• Pertinent Federal, State and local codes, laws and regulations

Ability to -

• Enforce codes, ordinances and approval conditions applicable to building
  construction and alteration
• Perform building, plumbing, electrical and mechanical inspections to ensure compliance with codes and regulations
• Perform plan checks on residential, commercial and industrial buildings
• Respond to requests and inquiries from the general public

Experience and Training

Any combination of experience and training that would likely provide the required knowledge
and abilities is qualifying. A typical way to obtain the knowledge and abilities would be:

Building Inspector I

• Possession of a valid International Code Council Permit Technician certificate 
• Ability to obtain a valid International Code Council Building Inspector certificate within 12 months of hire
• Two (2) years of increasingly responsible building inspection experience
• Equivalent to the completion of the twelfth grade supplemented by specialized training in
  carpentry, electrical, plumbing, HVAC trades, or a related field
• Possession of, or ability to obtain, an appropriate, valid California driver’s license

Building Inspector II

• Possession of, or ability to obtain, an appropriate, valid International Code Council Combination Building Inspector certificate in both the residential and commercial classification
• Three (3) years of increasingly responsible building inspection experience
• Equivalent to the completion of the twelfth grade supplemented by specialized training in
  carpentry, electrical, plumbing, HVAC trades, or a related field
• Possession of, or ability to obtain, an appropriate, valid California driver’s license

Class Specifications

Building Inspector I

Building Inspector II

Are you ready to make a difference in the City of East Palo Alto?

We are seeking an enthusiastic, innovative, forward-thinking, and inspirational team leader as the next

CHIEF BUILDING OFFICIAL

Salary: $10,948 - $13,307 Monthly

$131,379 - $159,692 Annually

Plus an attractive benefits package

OPEN UNTIL FILLED

If you thrive in a fast-paced environment, work well under pressure, and bring innovation, positive effective attitude to your work, you may be the next Chief Building Official for the City of East Palo Alto. The Chief Building Official plans, organizes, oversees, coordinates, and reviews the work of professional, technical, and administrative staff performing difficult and complex support related to all programs and activities of the Building Division. In addition, this position administers Building Code activities; manages the effective use of the City's permit processing, plans examination, building inspection, and code compliance resources to improve organizational productivity and customer service. The incumbent will provide highly complex and responsible support to the Community and Economic Development Director and in areas of expertise; and perform related duties, as assigned.

For more information about this remarkable opportunity please view the brochure below:

EXCITING OPPORTUNITY

The Town of San Anselmo is seeking applications for the full-time position of Senior Building Inspector in the Public Works and Building Department.  It is an exciting opportunity to work in a broad range of areas, to help shape the future of the Town.

The Department of Public Works maintains the Town’s infrastructure to support the community. With a staff of 15, the department is responsible for the operation and maintenance of the following public facilities: roads, parks, buildings, parking, equipment, and vehicle fleet. In addition, Town engineering, capital construction projects, and natural disaster response are also managed within the Public Works department.

THE POSITION

Typical duties of the Senior Building Inspector position include, but are not limited to:

• Make field inspections of buildings and public works permits to ensure compliance with approved plans, specifications, and applicable building, electrical, plumbing, and mechanical codes, statutes, and regulations of the Town, county, state and federal agencies.
• Review, approve and issue permits for construction work.
• Check plans and specifications for completeness, accuracy, and compliance with codes and ordinances.
• Investigate code violations and complaints.
• Conduct residential resale inspections, prepare and issue reports upon the sale of all residential property.
• Perform re-inspections and follow-up as necessary to gain compliance.
• Provide information and guidance to the public regarding codes, ordinances, and the permitting process.
• Provide technical information and interpretations regarding codes, ordinances and compliance methods to contractors, builders, designers, and the general public.
• Resolve difficult and complex code interpretation, enforcement, and inspection problems, issues, and conflicts.
• Prepare and maintain accurate records, reports, and files.
• Write clear and concise letters as needed.
• Provide staff assistance to the public at the department’s service counter as needed.

 Minimum Qualifications (Knowledge and Abilities):

• Knowledge of state and local building, electrical, plumbing, mechanical, energy, accessibility, and fire codes and local building, fire and zoning ordinances.
• Principles and techniques of building construction, building materials and accepted safety standards; Principles and techniques of building inspection.
• Ability to read, analyze and interpret building plans and specifications; understand, interpret and apply codes, ordinances, and regulations; communicate clearly and concisely in English, both orally and in writing.
• Use windows-based computer programs such as MS Word and Excel.
• Operate a car and pickup truck safely, back vehicle a long distance, and steer through narrow roadways and hillsides.

Experience and Training:

• Five years of progressively responsible experience in building inspection, including commercial inspection and/or plan check experience, of which two (2) years must be at full journey level.
• Three years of experience as a building inspector or related field involving inspection or code enforcement.
• Graduation from high school or equivalent to the completion of 12th grade – college training in the field of civil engineering, architecture, or building technology may be substituted for equivalent year of work experience. Associated of Arts degree preferred.
• Possession of, or ability to obtain within 3 months, a valid California driver’s license
• Possession of, or ability to obtain within 6 months, certification, through the International Code Council, as a California Residential Building Inspector- J1 and California Commercial Building Inspector- I1

Special Requirements/Physical Demands:

• On-site field inspections and office work require a moderate amount of physical agility. Intermittently walk, stand, twist, squat, kneel, climb, and bend both in the office and in the field.
• On a continuous basis, sit at a desk or stand at a counter to answer questions of the public.  Write by long hand and use a computer keyboard to communicate through written means.
• Frequently lift or carry a weight of up to 10 pounds and occasionally up to 50 pounds.
• The nature of the work requires the individual to climb 30’ to 40’ ladders or scaffolding to reach high areas such as roofs, balance on narrow walkways or steep-pitched roofs, crawl through narrow openings and in confined spaces.
• During inspections, the individual may be required to walk on uneven surfaces. Work will require exposure to intermittent uncomfortable working conditions such as dust, noise, and extreme cold or heat. Inspections are done out-of-doors year-round.

Located in Middletown, CA!

This position performs a variety of engineering tasks relating to plant reliability and performance efficiency, troubleshoots plant and equipment problems, leads plant based NERC/CIP reporting requirements, manages implementation of system/equipment repairs and upgrades, acts as project manager for a variety of plant efficiency upgrade and retrofit projects, acts as construction manager for a variety of projects including public works projects, assists in personnel training and scheduling of operations and maintenance functions. This position may also undertake special projects as assigned by and through the Plant Manager. The level of supervision will be dependent upon the incumbent’s classification level (Engineer II, III, IV, or V), but all levels will perform a variety of assigned complex technical and professional work.

ESSENTIAL DUTIES AND RESPONSIBILITIES

This position requires the incumbent reports for work on time and maintains satisfactory attendance in accordance with Agency policy; Ensures work responsibilities are covered when absent; Arrives to meetings and appointments on time; Performs special assignments for the Plant Manager or others as assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Level II:
This is the entry-level class within the Engineer series for an employee assigned to a Power Plant. Under supervision, employees perform a wide variety of fields and office engineering assignments within the work unit. Engineers as this level are expected to manage smaller projects with direct oversight.

Level III:
Employees at this level receive only general instruction or assistance as new, unusual, or unique situations arise and are fully aware of the operating procedures and policies within the work unit. Engineers at this level manage smaller projects with minimal direction. 

Level IV: 
This is the journey-level class within the engineer series. Working with minimal direction, employees at this level assist or lead capital projects, including project management, giving project assignments, reviewing work, providing guidance, and giving instruction to project personnel, including professional engineering staff, other staff, and contractors.   

Level V: 
This is the senior-level class within the engineering series. Working with minimal direction and often taking department goals and translating them into work assignments for individuals and other departments. Employees at this level manage the most complex projects. 

Responsibilities:

Level II:
Participates in the review and technical/economic analysis of new projects, and with the development of specifications, and negotiation of agreements with counterparties. Prepares periodic reports on progress and issues relating to the above.

Manages the covered piping system program and boiler code compliance. Perform inspections. Determine corrective actions. Oversee welding procedures and testing for code welds.

Manages the NERC Compliance Program for the project site.

Provides input to the Plant budget and Business Plan. 

Participates in the facility safety program.

Manages the plant drawing files, including updating files with as-built changes.

Prepares reports and makes oral presentations at public meetings.

Stay informed on industry events, technological advancements, and regulatory issues.

Performs other related duties as required.

Level III:
In addition to Level II class, this item:
 
Interfaces with plant staff to optimize plant output.

Provide specific support as needed to the Operations and Maintenance Supervisors, FOA and Materials Warehouse Coordinator.

Investigates and determines methods to improve performance and efficiency of power plant equipment and systems including turbine generators, condensers, pumps, cooling towers and heat exchangers, etc. and conducts engineering and economic analyses for consideration by the supervisor.

Stays abreast of electricity market conditions and communicates findings regularly to Plant Staff.

Develops technical specifications and assists with the development of equipment supply and construction contracts.

Provides on-site technical support for all DCS, Business Network, Historian and Communications Equipment.

Acts as a point of contact with the NCPA Generation Services Engineering Department and provides engineering assistance as requested.

Level IV:
In addition to Level III class, this item:

Develop commissioning and testing procedures as well as operations and maintenance procedures.

Participates in troubleshooting Plant equipment operating problems, performs “root cause” analyses and assists in the implementation of measures to prevent future problems.

Leads in the review and technical/economic analysis of new projects, and with development of specifications, negotiation of agreements with counter parties. Prepares periodic reports on progress and issues relating to the above.

During the development and engineering phase of projects this position will review, comment, modify and approve the plant designs as proposed by the Engineer of Record. Recommends purchase of equipment, and trains users to use new or modified equipment.

Acts as project manager on assigned projects which includes planning, interdepartmental coordination, budgeting, implementation, progress reporting, quality control, payment approval, etc.

Level V:
In addition to Level IV class, this item:

Maintains and communicates within the Generation Services Department up-to-date information on relevant trends and modern technologies in the field of Reliability and Plant Engineering. Analyzes the need for maintenance activities such as condition based, predictive, preventative, and scheduled. Participates in planning and scheduling maintenance activities.

During construction of projects this position provides management, coordination and quality assurance and control of various contractors. Coordinates and resolves problems with the Chief Building Official.

Regularly performs engineering systems calculations and analysis applicable to power plants, review and approval of engineering drawings and designs, coordinating with various contractors and the Chief Building Official to resolve problems during modifications and improvements. Provides support during the start-up and commissioning of the power plants or any related subsystems. Uses computer assisted engineering and design software and equipment to perform engineering tasks.

Steps into the Plant Manager or Operations and Maintenance Supervisor role from time to time.

MINIMUM QUALIFICATIONS  
Level II:
Education and/or Experience      
This level requires a bachelor’s degree in engineering (Mechanical or Electrical preferred) at an accredited four-year college or university; and a minimum of two (2) years of related experience in power plant/production engineering. A California Engineer-in-Training Certificate is desired.

Level III:
Education and/or Experience      
This level requires a bachelor’s degree in engineering (Mechanical or Electrical preferred) from an accredited four-year college or university is required; and a minimum of three (3) years in power plant/production engineering. At a minimum, have a California Engineer-in-Training (EIT) Certificate. A California Professional Engineering License is highly desirable.

Level IV: 
Education and/or Experience      
This level requires a bachelor’s degree in engineering (Mechanical or Electrical preferred) an accredited four-year college or university; and a minimum of five (5) years of related experience in power plant/production engineering. A California Professional Engineering License is highly desirable.

Level V:
Education and/or Experience      
This level requires a bachelor’s degree in engineering (Mechanical or Electrical preferred) an accredited four-year college or university; and a minimum of seven (7) years of related experience, preferably within a combined-cycle/steam-generating plant. A California Professional Engineering License is highly desirable.

KNOWLEDGE AND ABILITIES 

Knowledge:
Knowledge of power plant operations and plant design parameters; methods, materials and techniques used in the construction of geothermal power generating plant. General power plant safety principles and practices; Knowledge of local, state and federal regulations applicable to electric utility generator operators and generator owners; Knowledge of utility industry, generation practices, and new developments; Understanding of electric generation plant control systems; Good technical knowledge of electrical terminology and applications;  use and application of computer aided design software; Principles and practices of applicable ASME codes and standards; Principles of budget preparation and administration; Proficiency with MS Word and Excel;  Experience with MS PowerPoint, MS Project, MS SharePoint, OSIsoft PI, CMMS, AutoCAD, and relational databases (e.g. MS Access) is desirable; Demonstrated application of business and systems analysis techniques, SQL, client- server and web base technology, and report writing tools is also desirable; Requirements of Public Works Contracts including, Public Works bid process, roles and responsibilities of NCPA project manager versus contractor, bonding Public notices and registration requirements; project closure; NCPA leadership standards and expected leadership behaviors and considerable skill in verbal and written communications.

Abilities:
Observe and enforce NCPA safety procedures and to establish and maintain project priorities and to reason logically and creatively. Must develop and evaluate alternatives; analyze data and perform research work; analyze situations accurately and take effective action; communicate and negotiate effectively; prepare reports, correspondence, safety oversight plans, and exhibits; translate engineering calculations and analyses into concepts usable by decision-makers; Testify on results of completed studies; Consult with and advise administrators, decision-makers, and other interested parties on a broad range of subject-matter areas; serve as a lead person and gain and maintain the confidence and cooperation of those contacted during the course of work; Perform general plant performance calculations and engineering duties with minimum supervision; initiate, develop a variety of projects from concept to completion;  Develop technical specifications, drawings, and work scopes; Conduct bid walks and Safety orientations; Control project costs and report progress; Conduct post project reviews and consistently manage NCPA staff or contractors in pursuit of facility goals.

SPECIAL REQUIREMENTS

Valid California Driver's License and insurance, as travel by car to NCPA facilities is required.
Additional coursework or certifications in information technology would be helpful.

Engineer II- III has no supervisory responsibilities. 

Engineer IV may lead projects and function as interim supervisor as needed. 

Engineer V – Leads large-scale projects, may supervise other employees, and may function as interim plant manager as needed. 

While performing the duties of this job, the employee is frequently required to stand, sit; use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee is required to walk, climb or balance; stoop, kneel, crouch, or crawl and taste or smell. The employee must occasionally lift and/or move up to twenty-five (25) pounds. Specific vision abilities required by this job include close vision, distance vision, depth perception and ability to adjust focus.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this Job, the employee may be exposed to wet and/or humid conditions; moving mechanical parts; high, precarious places; outside weather conditions; extreme cold; extreme heat, and risk of electrical shock. The noise level in the work environment is usually loud.

All employees are responsible for contributing to an inclusive, safe, and secure work environment that values diverse cultures, perspectives, and experiences, and is free from discrimination.
 

The Department: 

SVP currently provides over 600 Megawatts of power to residential and business customers within Santa Clara, of which 40 percent of comes from carbon-free renewable resources. In addition to using green energy from large-scale wind, solar, geothermal and hydroelectric projects outside of the area, SVP employs innovative ways to locally produce electricity by operating Thermal Generation facilities utilizing Simple Cycle, Combined Cycle, and Cogeneration technologies. It is the mission of Silicon Valley Power to be a progressive, service-oriented utility, offering reliable, competitively priced services for the benefit of Santa Clara and its customers. Being competitive in the marketplace with a continuous focus on customer service, SVP can provide economic value to the City of Santa Clara and its customers while maintaining low residential rates and offering competitive rates for all customers.

The Positions: 

Silicon Valley Power is recruiting to fill various Electric Program Manager positions in the following specialties: Capital Project, Contracts, Distributed Energy Resources and Storage, Environmental, Safety, and System Operations.  

Capital Project Management

The focus and priority of this position will be to perform complex professional project management work to support the successful completion of over $300 million in near-term capital improvement program projects to support electric utility load growth.  The position is assigned to the customer development and project management unit which manages, plans, and oversees the development and implementation of the capital improvement program. This position will report to the Principal Electric Utility Engineer overseeing the System Expansion Program and will work collaboratively on the management of these critical projects. The individual will perform and manage the work related to planning, design, construction, operations, and maintenance of utility projects, including receiving stations, substations, electric transmission and distribution facilities, and other electrical infrastructure.  The incumbent is expected to manage consultants and directly administer public works contracts. Experience in electric utility engineering, utility asset management, GIS and work order management system is desirable.

• Distinguishing Characteristics/Experience:
  1. Direct knowledge in managing, planning, and overseeing the development and implementation of Capital Improvement Program(s) (CIP).
  2. Ability to provide extensive, in-depth, and specialized administrative, budgetary, financial, and compliance research, analysis, and support.
  3. Experience in management, engineering, financial, high-level administrative planning and analysis, and/or project management experience.

Contracts Portfolio 

The focus and priority of this position will be to perform complex professional work to support the development and management of SVP’s contracts portfolio.  SVP’s operation requires hundreds of unique contracts including specialized services agreements, leases, agreements with customers for substation construction, funding and deposits, public works contracts, license agreements, power purchase and resource adequacy agreements, as well as other unique agreements.  The position is assigned to the Business Services Division.  The incumbent will both lead staff supporting contracts functions and have direct involvement in negotiating and reviewing contracts.   Experience in utility contracts is desirable.

• Distinguishing Characteristics/Experience:
  • Direct knowledge and experience in contracts review, negotiating, and management for a variety of contract types.
  • Ability to providing extensive, in-depth, and specialized administrative, budgetary, financial, and compliance research, analysis, and support
  • Experience in managing and assigning work to administrative and clerical staff.

 

Distributed Energy Resources, Renewable Energy and Power Purchase Contracts

This position develops and implements cutting edge programs entailing distributed and renewable generation, energy storage, demand response, and microgrids. Incumbents perform professional level, individual work in project development.  Duties may include supervising and participating in the conduct of studies and surveys, data interpretation, forecasting, commodity purchasing, contract negotiation, pricing/rate making, engineering studies, development of policies and procedures, evaluating regulatory and legislative initiatives, preparing, reviewing, and managing budgets and operations.  Commodity purchasing and contract negotiation may include evaluation and development of strategies for electricity generation, both distributed and utility scale. Incumbents may supervise management and non-management staff and act as project team leaders and manage programs and projects.  Project management responsibilities include preparing RFPs, evaluating proposals, and managing contractors and consultants. 

 

Environmental

This position will ensure the City’s compliance with applicable federal, state, and local regulatory agency requirements and guidelines pertaining to Air Quality, Water, Wastewater, Storm water, and Industrial waste.   This position will work with staff across multiple Divisions to develop, implement, and perform procedures and guidelines designed to ensure compliance and develop staff.  They will compose, compile, track, and analyze information related to regulatory, program, and compliance oversight. This position will act as SVP’s Subject Matter Expert and provide technical and functional advisement to Management and Staff concerning Environmental Compliance. This position requires in-depth knowledge of Federal, State, and Local laws/regulations. This position also requires the ability to forecast and identify compliance issues and to develop mitigation strategies to correct issues. The position will also assist in the development of budgets, service contracts and training programs.

Safety

This position establishes, implements, and enforces an effective department wide safety and compliance program that prevents injury and illness. They will work to ensure that employees, both management and non-management, comply with the rules and regulations of Federal, State and Local Regulatory Agencies, and that company safety and compliance policies and procedures are consistently followed.

The position will also facilitate the development and completion of the department’s compliance and controls register, controls testing and auditing, standards development and review, horizon scanning for new and changing regulatory requirements, and serving as an OSHA subject matter for the department. The position will also assist in the development of budgets, service contracts and training programs. 

System Operations

This position will administer programs for work management, maintenance monitoring and asset management focused in all areas of Utility Operations (Metering, Substations, Transmission and Distribution). This position will also be responsible for the performance, review, and implementation of improvements to these programs.  The position will develop, maintain, and improve SVP’s Outage Management System. This position will work to ensure compliance with all applicable NERC standards and seek constant improvement in SVP Work and Safety standards affecting System Operations. The position will also assist in the development of budgets, service contracts and training programs. 

As a member of the City's Unclassified Service, this is an "at-will" position and the incumbent serves at the discretion of the City Manager.  An incumbent in this classification:  demonstrates strong ethical, professional, and service-oriented leadership and interpersonal skills; sets a good example; and correctly applies the tenets of the City's Code of Ethics and values. 

 

 THIS RECRUITMENT MAY BE USED TO FILL MULTIPLE POSITIONS IN THIS, OR OTHER DIVISIONS OR DEPARTMENTS BESIDES THE POSITIONS LISTED BELOW.  IF YOU ARE INTERESTED IN EMPLOYMENT IN THIS CLASSIFICATION, YOU SHOULD APPLY TO ENSURE YOU ARE CONSIDERED FOR ADDITIONAL OPPORTUNITIES THAT MAY UTILIZE THE APPLICANTS FROM THIS RECRUITMENT. MEETING THE MINIMUM QUALIFICATIONS DOES NOT GUARANTEE ADMITTANCE INTO THE EXAMINATION PROCESS.  ONLY THE MOST QUALIFIED CANDIDATES WHO DEMONSTRATE THE BEST COMBINATION OF QUALIFICATIONS IN RELATION TO THE REQUIREMENTS AND DUTIES OF THE POSITION WILL BE INVITED TO TEST OR INTERVIEW. 

This description may not include all the duties listed below, nor do the examples cover all duties that may be performed.

Under general direction, the incumbent will:
•    Plan, develop, implement, evaluate, and manage an assigned program or core department service area; Supervise subordinate supervisory, professional, technical, and/or clerical staff; participate in the selection, hiring, training, and coaching of staff; conduct performance evaluations; and implement disciplinary actions as required; 
•    Research and analyze program operations to ensure effective utilization of resources and increase productivity of work, provide regular reporting measures, conduct presentations, and make recommendations to management; 
•    Plan and implement work plans and projects for assigned area; 
•    Oversee daily operations of assigned program area and safety ensuring that all applicable regulatory requirements are followed; 
•    Develop and monitor resource models and/or programs in alignment with State, Federal and local regulations and policies; 
•    Deliver and manage communications to internal and external customers; 
•    Administer program budget, including budget preparation, forecasting, and monitoring expenses and revenue; 
•    Plan, implement, and monitor program or service area goals and objectives in alignment with Department goals to ensure effective programming and operations; 
•    Monitor and report on assigned area activities, including managing resources, tracking short and long-term work activities and provide recommendations to management staff to improve efficiency in assigned area; 
•    Serve as the subject matter expert in assigned specialty and provides consultation to subordinates, vendors, and management on assigned area of expertise; 
•    Set the standard for safety and adhere to all applicable safety and environmental standards and regulations, including City safety standards and policies; 
•    May act as a representative of the Department in assigned program or service area; 
•    Implement programs which may include such functions as scheduling, coordinating, and assigning staff to projects;
•    Oversee request for proposal processes, participate in the preparation of vendor contracts, negotiate contracts, and act as lead contract administrator for planned program objectives;
•    Prepare a variety of narrative and periodic reports to keep management informed of program/project status;
•    Implement program audit systems to ensure appropriate use of public funds;
•    Develop qualitative and quantitative measures to evaluate program/project financial status, customer satisfaction, contractor performance, and public relations;
•    Maintain current knowledge of external program trends and legislation to ensure necessary compliance;
•    May represent the Department and participate in regional and state efforts to meet compliance, legislative and societal goals;
•    Develop, implement and evaluate marketing and educational materials to present to internal and external customers;
•    Use City computer applications (including but not limited to Microsoft Suite) and databases to track program status and funds and use; 
•    Prepare reports, memos, and supporting documentation; 
•    May act as Division Manager on a temporary basis, as assigned; and
•    Perform other related duties as assigned.

EDUCATION AND EXPERIENCE
•    Education and experience equivalent to graduation from an accredited college or university with a Bachelor's Degree in Engineering, Economics, Public or Business Administration, Environmental Sciences, Finance or a closely-related field; AND
•    Three (3) years' experience leading, supervising, managing, and coordinating work including but not limited to, customer related programs, project management, building facilities management, or writing, developing or administering safety or environmental compliance standards; OR
•    Generation/Substation/Transmission and Distribution/System Operations Specialties:  Three (3) years of experience in a lead, supervisory, or senior role performing work, including but not limited to a Supervisor, Engineer, Manager, Lead Technician, or Foreperson,  

ACCEPTABLE SUBSTITUTION
•    For Generation/Substation/Transmission and Distribution/System Operations Specialties: additional years of experience in a role equivalent to, but not limited to a Control Room Operator, Electric Utility Technician, Engineer, Lineworker, or working in a lead, supervisory, or senior role performing work, including but not limited to a Supervisor, Manager, Lead Technician, or Foreperson may substitute for the degree requirement on a year for year basis up to four (4) years.
•    For Generation/Substation/Transmission and Distribution/System Operations Specialties: Two (2) years of experience working in a role equivalent to, but not limited to a Control Room Operator, Electric Utility Technician, Engineer, or Lineworker may be substituted for one (1) year of experience as a lead, supervisor, or senior role up to six (6) years.
•    Two (2) years of experience in customer related programs, project management, building facilities management, or writing, developing or administering safety or environmental compliance standards may be substituted one (1) year of experience as a lead, supervisor, manager, and coordinator experience up to six (6) years. 

LICENSES/CERTIFICATIONS
Possession of a valid Class C California driver's license is required at the time of appointment and for the duration of employment.

DESIRABLE QUALIFICATIONS
•    An advanced degree in Engineering, Public or Business Administration, Environmental Sciences or related field is desirable.
•    When assigned to Systems and Project Management, a: Project Management Professional (PMP) certification from Project Management Institute (PMI) or an equivalent certification from accredited program is desirable.
•    When assigned to Generation/Substation/Transmission and Distribution/System Operations  Specialties, experience working in a power plant, substation,  transmission &  distribution, or Electric System Control Center environment is desirable.
•    When assigned to Safety Compliance, an in depth knowledge of OSHA and CalOSHA standards is desirable. 
•    When assigned to Environmental Compliance, an in-depth knowledge of Spill Prevention, Control and Countermeasures (SPCC), Air Permits, and Water Permits is desirable. 

OTHER REQUIREMENTS
•    Must be able to perform all of the essential functions of the job assignment.
•    Incumbents may be subject to initial and periodic comprehensive background checks. 
•    May be required to work unusual hours and weekends in performance of their duties and be available on an "on call" basis.
 

Other Requirements:  

• Must be able to perform all of the essential functions of the job assignment.
• Incumbents may be subject to initial and periodic comprehensive background checks. 
• May be required to work unusual hours and weekends in performance of their duties and be available on an "on call" basis.

CONFLICT OF INTEREST 

Incumbents in this position are required to file a Conflict of Interest statement upon assuming office, annually and upon leaving office, in accordance with City Manager Directive 100.  

Meeting the minimum qualifications does not guarantee admittance into the examination process.  Only the most qualified candidates who demonstrate the best combination of qualifications in relation to the requirements and duties of the position will be invited to interview. 

 

Federal law requires all employees to provide verification of their eligibility to work in this country. Please be informed that the City of Santa Clara will not sponsor, represent, or sign documents related to visa applications/transfers for H1B or any other type of visa which requires an employer application. 

Knowledge of:
•    Local, State and Federal Laws related to environmental, safety, health, electrical system construction, maintenance, inspection, and NERC regulations pertaining Electric Utilities;
•    Best practice utility maintenance and project planning strategies and methods;
•    Cost-benefit and return on investment analysis for proposed programs
•    Basic understanding of Electric Utility economics, methodologies and principles; 
•    Best practice utility compliance, maintenance and operations methods; 
•    Electric department contract methodologies;
•    Project management tools and methodologies, including workload planning and budgeting;
•    Project and workload planning;
•    Preparation, negotiation, and administration of contracts and fiscal planning;
•    Negotiation techniques and strategies;
•    Principles and practices of customer service;
•    Research methods and statistical analysis;
•    Principles and practices of management, employee supervision, training, and performance evaluation;
•    Pertinent State, Federal, and Local laws and regulations for assigned specialty area; 
•    Problem solving and conflict resolution practices and techniques; and
•    Office safety practices, procedures and standards.

Ability to:
•    Develop, implement, and monitor programs and projects;
•    Effectively problem solve with various teams and management to improve and streamline processes;
•    Supervise staff in compliance with applicable Memorandum of Understandings
•    Analyze situations, identify problems, and exercise sound independent judgment within established guidelines;
•    Identify, research and gather relevant information from a variety of sources;
•    Collect and analyze data and prepare a variety of statistical and narrative reports;
•    Operate standard office equipment and learn City databases and software programs; 
•    Develop and maintain electronic databases;
•    Effectively develop, negotiate, and monitor contracts;
•    Interpret and apply laws and regulations, policies and procedures;
•    Communicate clearly and effectively both orally and in writing and carry out oral and written instructions;
•    Prepare and present clear, concise and complex written and oral reports and presentations;
•    Develop and conduct effective public relations programs on assigned specialty; 
•    Speak effectively before large groups of people;
•    Establish and maintain tactful, courteous and effective working relationships with those contacted in the course of work including the general public;
•    Work independently with minimal supervision;
•    Work effectively as a member of the department to achieve common goals and be able to deliver excellent customer service to both internal and external City clients;
•    Work effectively in time-sensitive situations and meet deadlines;
•    Coordinate multiple projects and complex tasks simultaneously;
•    Develop creative and practical solutions to complex and difficult problems; and
•    Bend, stoop, reach, carry, climb, and lift as necessary to perform assigned duties.
 

Additional Information: 

You must answer all job-specific questions in order to be considered for this vacancy or your application will be deemed incomplete and withheld from further consideration. Applications must be filled out completely (i.e. do not write “see resume or personnel file.”)  To receive consideration for the screening process, candidates must submit a 1) Cover Letter and, 2) Resume. Incomplete applications will not be accepted. Application packets may be submitted online through the “Apply Now” feature on the job announcement at www.santaclaraca.gov.  Applications will be reviewed on a weekly basis for consideration to the position.  If you are interested in applying you are encouraged to apply as soon as possible, before the position is closed. A first review of applications will be on September 18, 2023. 

 

The City of Santa Clara is an equal opportunity employer. Applicants for all job openings will be considered without regard to age, race, color, religion, sex, national origin, sexual orientation, disability, veteran status or any other consideration made unlawful under any federal, state or local laws. The City of Santa Clara is committed to offering reasonable accommodations to job applicants with disabilities. If you need assistance or an accommodation due to a disability, please contact us at (408) 615-2080 or HumanResources@santaclaraca.gov. 

Please click on the Job PDF to view the full job announcement.