Search Jobs

Located in Middletown, CA!

The Mechanic Operator position consists of five levels of competency.  Individuals can either enter into the classification at the beginning level of the job or somewhere between the entry level and the top step depending on the qualifications brought with them.  It is the expectation of NCPA that all employees progress to the top level.  In order to progress to the top level an employee must complete all components in a competency level within the associated training matrix.  Employees who successfully complete a training level matrix and who received a rating of “meets requirements” or higher by their immediate supervisor will be promoted when qualified.  Upon completion/demonstration of competencies employees will be expected to perform work in all completed levels and other job-related duties as required. All employees have the right to challenge any component in the training matrix by proving proficiencies verbally and practically.

General Scope of the Job
Under general supervision of the Mechanical Maintenance Supervisor and at times under the general direction of the Mechanic Operator Lead Person; to maintain, repair, adjust, install, and test, powerplant steam field, water injection systems and equipment and maintain lease site grounds.  The measure of accuracy and reliability is the safe, effective and efficient performance of the Facilities.  This position is predominately mechanic based with operation support as outlined below.

Description of Duties and Responsibilities
Level III:
This level of the Mechanic Operator position requires the completion of all Level III training requirements. The employee must perform the duties as described below and as defined in lower levels while attaining Level IV skills and experience through academic and hands-on training. Level III knowledge and skills focus on journey level mechanical duties and responsibilities.
•    Inspects, tests, calibrates, installs, rebuilds, adjusts, repairs and aligns all mechanical equipment such as hydraulic control systems, turbines, generators, cooling tower, pumps, electric motors, valves, gear reducers, compressors, blowers heat exchangers, HVAC systems excluding refrigerant replacement, fire protection systems, diesel and gas engines, mufflers, separators, traps, rock catchers, tanks, pipeline and pipe supports.
•    Maintains facility structures. 
•    Performs basic inspections and repairs various rigging equipment, fixtures and cranes.
•    Assists the scaffolding qualified journeyman in maintaining, and repairing scaffolding. 
•    Inspects and maintains safety devices such as harnesses and rescue equipment.
•    Works with Safety Manager to maintain records of regulated equipment.
•    Keeps accurate records of equipment history, reports and work orders on computer for CMMS.  Works with CMMS personnel for accuracy and reliability.
•    Performs preventative maintenance and assessments on various plant equipment.
•    Writes Work/Operating Procedures within area of expertise.
•    Requisitions replacement parts and supplies to carry out assigned tasks.
•    Makes working drawings of components and changes made to Plant systems relative to area of expertise.
•    Installs, inspects, tests, repairs, rebuilds, and maintains equipment such as portable and fixed site pumps, valves, mufflers, separators, traps, rock catchers, turbines, generators, motors, gear reducers, compressors and hydraulic control systems, pipelines, tanks, pipeline supports, effluent piping components.
•    Maintains lease site grounds structures, culverts, roads, drains and ditches.
•    Examines and diagnoses malfunctions or defective equipment on pumps, motors, valves, separators, vents, air vacuum breakers and compressors; disassembles/reassembles, overhauls and adjusts defective equipment
•    Installs, fits and calibrates equipment replacement parts.  Observes equipment operation.  Adjusts equipment to operational specifications using specialized tools and precision measuring instruments.
•    Disassembles, removes, repairs, replaces, assembles and aligns pipes, pipeline components, and valves repairing or replacing broken and worn parts using various hand tools.
•    Observes and directs contractors while digging trenches, cleaning tanks and maintaining lease site grounds.
•    Under the direction and training of operations, assists with clearances on steam field and effluent pipeline equipment for maintenance purposes.
•    Will be trained to Rig and lift equipment to install, repair or replace equipment.
•    Instructs and trains workers in repair and maintenance procedures of steam field, power plant and effluent pipeline equipment.
•    Maintains inventory of tools and materials for the maintenance work at the steam field and effluent pipeline.
•    Maintains steam field equipment records on work completed on CMMS or equivalent maintenance program.
•    Assists other classifications when needed.
•    Performs other job-related duties as required.
•    Acquire OSHA certified training to meet business needs.
•    Trains and advises other workers in the maintenance and operation of steam field and effluent pipeline equipment.
•    Maintains and repairs Hydraulic Control Systems.

Level IV:
This level of the Mechanic Operator position requires the completion of all Level IV training requirements for operational duties and responsibilities.  The employee must perform the duties as described below and as defined in lower levels while attaining Level V skills and experience through academic and hands-on training.
•    Reviews, coordinates and reports work orders, work activities and equipment clearances with appropriate personnel.  
•    Checks equipment to be cleared in advance to guarantee its condition to others.  Informs Operator Technician Lead Person and Supervisors of the status of equipment and systems.  
•    Under direction of the Operator Technician Lead Person or a designee, operates various equipment and performs basic equipment clearances on low voltages (<600 volt) electrical breakers, steam line equipment and effluent equipment.  
•    Terminates and connects motor wiring to facilitate bearing repairs (less than 600 volts.).
•    Conducts online test of equipment before certifying its status and performance.

Machinist Duties and Responsibilities
•     Sets up and operates machine tools to repair or reproduce equipment parts and fittings working from blueprints or defective parts using precision tools and measuring instruments.
•    Fabricates special tools, rigging equipment and replacement parts to repair equipment.   
•    Fabricates, modifies, shapes and repairs equipment parts using a variety of metal working machines.
•    Chips, grinds, bores, and drills equipment parts.
•    Verifies conformance of finished work piece to specifications, using precision measuring instruments.
•    Calibrates, fits and assembles equipment parts according to drawings and specifications using machine tools, power tools, and measuring instruments.
•    Installs machined replacement parts; starts and observes equipment operation to detect malfunctions or out-of-tolerance performance, adjusts as necessary.
•    Maintains shop equipment and tools.
•    Maintains inventory of machining tools.

Representative Physical and Job Demands
•    Regularly talks and listens to others to exchange and obtain information to direct the operation and maintenance of Geothermal Facility steam field and effluent equipment.
•    Regularly reaches, grasps, pushes and pulls various wrenches, hand tools, and other objects using manual dexterity and eye hand coordination to operate and maintain equipment.
•    Regularly climb ladders and walks on platforms near high temperature surfaces; works on slippery or uneven surfaces in precarious places.
•    Frequently walks, reaches, kneels and crouches using feet, legs, hands and manual strength to access and operate plant equipment.
•    Occasionally lifts and moves pumps motors and pipe weighing up to 50 pounds.
•    Routinely works near heated surfaces; works on slippery or uneven surfaces in precarious places to adjust or operate equipment.
•    Occasionally exposed to high voltage and other electrical hazards while working on equipment.
•    Routinely works in outside weather conditions and is exposed to chemicals, wet and humid conditions, extreme cold and heat while inspecting and maintaining equipment.  The noise level is frequently very loud.
•    Routinely listens to operating sounds of equipment to diagnosis equipment malfunctions.
•    Frequently operates forklifts cranes, air compressors, sandblasters and power tools to maintain and repair equipment.
•    Frequently operates Agency vehicles going to and from job locations.

Job Expectations
Acquisition and Use of Technical Knowledge
•    Possesses or acquires as needed the ability to detect, diagnose disassemble and repair steam and water equipment with a fundamental knowledge of; turbine equipment, and auxiliary systems and their capabilities; operation processes, mechanical and electrical theory and background to operate equipment; measuring devices and hand tools for maintenance work; general contamination and control practices and procedures; basic math, geothermal powerplant rules and regulations; clearance procedures, physics including pump mechanics; basic principles of thermodynamics and fluid flow.  Given this basic knowledge, understands own role within the plant and how that role requires the use of knowledge applied to practical, day to day, operations and maintenance demands.  Hold self-accountable to acquire knowledge that may be needed when a job situation changes, new tasks are introduced to the job, or when improved performance requires acquiring extended or specialized information.
•    Possesses or acquires as needed an extensive knowledge of safety, fire, and security rules and procedures.  Given the emphasis of safety at the plant, uses knowledge to improve plant conditions and the organization’s safety record.
•    Acquires knowledge of operations and maintenance procedures on a continuing basis to stay current as a significant contributor to plant solutions, safety performance, and operations and maintenance improvements.
•    Confers with Operator Technician Lead Person or Operations Supervisor to resolve system problems and offers a variety of workable solutions to complex problems and report status of systems and equipment.  
•    Identifies problems or trends with systems and equipment early to prevent operator or electrical errors. 
•    Passes knowledge on to other employees as a way to contribute to the performance of others, or get a job done.
•    Assesses own limitations with the fundamental knowledge needed to perform in the job.

Application of Technical and General Job Skills
Technical and job skills are indicated by demonstrating an ability to:
•    Efficiently and effectively operate, control, and maintain equipment, and be accountable for aspects of the job at the Geothermal Facility. 
•    Implement or use existing methods to control the waste of time, money and material resources, such as:
o    Acting to improve work procedures 
o    Conserving resources 
o    Expediting a job
o    Completing a work assignment efficiently
o    Completing long term work in an orderly fashion
•    Work with management to identify and learn from mistakes made and apply what is learned to future situations or plant conditions.
•    Establish and maintain effective work relationships with those contacted in the performance of required duties.
•    Review own action to determine the cause of poor working relationships so those relationships can be improved
•    May be required to work extended hours and on normal days off.
•    Operate Agency vehicles and equipment safely.

Training and Experience Requirements
Level III: Completion of the NCPA Level III training program or three years of equivalent journey-level mechanical experience.
Level IV: Completion of the NCPA Level IV training program or three years of equivalent journey-level mechanical experience and operations experience.

Driver’s License Requirement
Possession of an unrestricted Class C California operator’s license issued by the State of California, Department of Motor Vehicles.  Possession and maintenance of a good driving record as demonstrated by the absence of multiple or serious traffic violations or accidents within the last three (3) years.

Desired Qualifications 
•    Possession, or ability to obtain with training, a Class A California operator’s license issued by the State of California Department of motor Vehicles.
•    Ability to set up and operates machine tools to repair or reproduce equipment parts and fittings working from blueprints or defective parts using precision tools and measuring instruments.
•    Ability to Fabricate special tools, rigging equipment and replacement parts to repair equipment.   
•    Ability to Fabricate, modifies, shapes and repairs equipment parts using a variety of metal working machines.
•    Chips, grinds, bores, and drills equipment parts.
•    Verifies conformance of finished work piece to specifications, using precision measuring instruments.
•    Calibrates, fits and assembles equipment parts according to drawings and specifications using machine tools, power tools, and measuring instruments.
•    Installs machined replacement parts; starts and observes equipment operation to detect malfunctions or out-of-tolerance performance, adjusts as necessary.

EOE

Application deadline: Friday, July 19, 2024.

The South Placer Municipal Utility District is seeking an outstanding General Manager to lead its mission of protecting the public health and water environment, providing efficient and effective sanitary sewer services, and preparing for the future. The District has a reputation as a highly desirable District and has won numerous industry awards.

The General Manager is responsible for the day-to-day operations of the District and reports to a five member board. The General Manager plans, organizes, directs, and reviews the overall administrative activities of the District; advises and assists the Board; and represents the District’s interests at local, regional, State and Federal levels.

The ideal candidate will have a Bachelor’s Degree or higher from an accredited college or university in engineering, business, public administration or a closely related field; a Master’s Degree is desirable. Five years of professional experience at a senior-executive level in municipal utility systems, ideally with knowledge of wastewater maintenance systems and progressive responsibility in administration and operation of wastewater systems.

To view additional qualifications and submit your resume (reflecting years and months of employment including beginning/ending dates), cover letter, and a list of six work-related references (two supervisors, two direct reports, and two colleagues) please go to: https://www.cpshr.us/recruitment/2342

TO VIEW JOB ANNOUNCEMENT, CLICK JOB PDF OR JOB ANNOUNCEMENT URL BELOW.

The City of Lincoln is accepting applications for the position of Refuse Truck Driver II in the Solid Waste division of the Public Works department. Under general supervision, this position performs a variety of tasks in the collection of residential, commercial and industrial solid waste refuse; drive and operate refuse collection vehicles; organize, assign and review the work of others and perform other related duties as required.  

DISTINGUISHING CHARACTERISTICS

Refuse Truck Driver II

This is a journey level class and is distinguished from the Maintenance Worker I classification by the ability to perform the full range of duties assigned with only occasional instruction or assistance as unusual or unique situations arise. This class is distinguished from the Senior Refuse Truck Diver in that the latter provides technical and functional supervision over assigned staff or division programs and responsibilities.

SUPERVISION RECEIVED/EXERCISED

Receives general supervision from a Public Works Supervisor. May receive technical and functional supervision from a Senior Refuse Truck Driver.

ESSENTIAL FUNCTIONS

Include but are not limited to the following:

• Drives and operates a variety of collection vehicles and equipment including one or two-person-staffed refuse collection truck, front, rear and side loaders in the collection and transportation of residential and commercial refuse; responds to afterhours call-outs if assigned.
• Maintains assigned truck by regular cleaning and washing, including inspecting for mechanical or other operating problems; reports mechanical or related problems for maintenance; may perform minor maintenance as appropriate.
• Operates hydraulic/mechanical controls to load, compress, and dump refuse; collects and disposes of debris on assigned route; transports refuse to/unload at appropriate landfill sites and/or sewage treatment plant.
• Assists with battery sorting, electronic waste collection, bin repair or delivery, cardboard removal, illegal dumping cleanup, and any other related solid waste program or assignment.
• Completes and posts notification tags on containers, bins and dumpsters for unacceptable contents for refuse collection.
• Prepares, maintains and submits records, reports and forms including time records, equipment and maintenance records, and route maps and logs.
• Responds to questions and concerns from the general public; provides information as is appropriate and resolves public service complaints.
• Establishes positive working relationships with representatives of community organizations, state/local agencies, City management and staff and the public.
• Performs other related duties as assigned.

PHYSICAL, MENTAL AND ENVIRONMENTAL WORKING CONDITIONS

Position requires sitting, standing, walking on level and slippery surfaces, reaching, twisting, turning, kneeling, bending, stooping, squatting, crouching, grasping and making repetitive hand movement in the performance of daily duties. The position also requires both near and far vision when inspecting work and operating assigned equipment. The need to lift, carry and push tools, equipment and supplies weighing 25 pounds or more is also required. Additionally, the incumbent in this outdoor position works in all weather conditions including wet, hot and cold. The incumbent may use cleaning and lubricating chemicals, pesticides or herbicides which may expose the employee to fumes, dust and air contaminants. The nature of the work also requires the incumbent to climb ladders, use power and noise producing tools and equipment, operate hydraulic aerial devices, drive motorized vehicles and heavy equipment, work in heavy vehicle traffic conditions and often work with constant interruptions.

KNOWLEDGE/SKILLS/ABILITIES

The following are a representative sample of the KSA’s necessary to perform essential duties of the position.

Knowledge of:  Methods, practices and techniques of solid waste and refuse collection and disposal; practices, techniques and materials used in the collection and disposal of solid waste refuse; knowledge of the City street system; applicable federal, state and local laws, codes and regulations; operating characteristics and safety requirements for operation of trucks, refuse vehicles and other heavy and light equipment; defensive driving; proper lifting procedures; Principles and practices of lead supervision, training, and performance evaluation, including safety practices and related record-keeping; methods and techniques for record keeping; basic principles of mathematics; occupational hazards and standard safety procedures.

Skill to:  Safe, effective, defensive and attentive driving, along with experience using a variety of solid waste and refuse collection vehicles, equipment, tools and materials. 

Ability to:  Perform solid waste refuse collection and disposal; drive and operate solid waste and refuse collection trucks; respond to issues and concerns from the community; interpret, explain and apply applicable laws, codes and regulations; operate a variety of solid waste and refuse collection equipment, vehicles and tools; perform heavy manual labor for extended periods of time; work at substantial heights; respond to afterhours call-outs if assigned; organize, prioritize and follow-up on work assignments; work independently and as part of a team; make sound decisions within established guidelines; analyze a complex issue, and develop and implement an appropriate response; develop and coordinate collection route schedules, including identification of non-routine special routes/equipment needs related to special events/projects; inspect trucks for maintenance/replacement recommendations; act as a lead worker and perform advanced journey level solid waste refuse collection work related to area of assignment; follow written and oral directions; observe safety principles and work in a safe manner; communicate clearly and concisely, both orally and in writing; establish and maintain effective working relationships.

THE SELECTION PROCESS

The process may include an in-basket exercise, individual interviews, panel interviews and/or other related components.  Only those candidates who have the best combination of qualifications in relation to the requirements and duties of the position will continue in the selection process. The candidate selected for the position will be required to complete a background check including reference checks, fingerprint check, medical exam, drug-screening and/or other related components.

Human Resources will make reasonable efforts in the examination process to accommodate persons with disabilities. Please advise Human Resources of any special needs a minimum of five days in advance of the selection process exam by calling (916) 434-3229 or emailing hr@lincolnca.gov. The City of Lincoln is an Equal Opportunity Employer.

The information contained herein is subject to change and does not constitute either an expressed or implied contract.

The Application Programmer performs or assists in the design, documentation, coding, testing, and implementation of new application programs or enhancements to existing application programs consistent with the Software Development Life Cycle (SDLC) best practices and applicable computer programming standards and frameworks. The position is primarily responsible for the suite of Bid-to-Bill applications as well as other business applications in use by the Agency. The position will work with other developer staff and supervisor during probationary status to learn and develop proficiency in the use of the Agency's software development frameworks, processes, and documentation design standards.

ESSENTIAL DUTIES AND RESPONSIBILITIES
This position requires that the incumbent reports for work on time and maintains satisfactory attendance in accordance with Agency policy; Ensures work responsibilities are covered when absent; Arrives to meetings and appointments on time; Performs special assignments as assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Level I: 
This classification is an entry-level position that is not expected to perform with the same level of independence of direction and judgment as higher levels. The level I works closely with other senior-level CTAs and is often given direction to complete tasks, install and troubleshoot hardware and software, perform system upgrades, evaluate and apply patches to systems, work closely with customers, and provide application support through help desk requests, and creates and maintains documentation.

Level II: 
This classification requires having all Level I duties and responsibilities with a minimum of two years of experience in software application development. Level II receives occasional direction and guidance from other senior-level CTAs; otherwise, uses developed experience and professional judgment to successfully complete projects in accordance with defined requirements and established timelines.

Responsibilities:
•    Within a specific hardware and operating system environment, work to define and design the operating features of new programs or enhancements
•    Produce appropriate conceptual-level application documentation for review and approval by the supervisor
•    Produce appropriate programming documentation for the review of the Supervisor, with sufficient detail on which to base programming activities
•    Develop computer programs in accordance with design documentation, closely following coding standards and conventions used within NCPA
•    Test applications using prescribed test methodology and tools
•    Develop an implementation plan, prepare production rollout for approval by the supervisor, and coordinate with the Ops team to execute the rollout
•    Maintain and enhance software applications
•    Conduct independent communications with user departments in a cooperative and professional manner
•    Provide emergency system support outside normal working hours as needed, on a rotational basis with other department employees
•    Travel to NCPA remote field sites to provide support to remote users as needed 
•    Assist in the evaluation of proposed new or modified computer system hardware and software

MINIMUM QUALIFICATIONS

Level I:
Education and/or Experience      
Bachelor's degree in Computer Science, Management Information Systems, Computer Engineering, or related field from an accredited four-year college or university and at least six months of related programming experience and training.

Level II:
Education and/or Experience      
Bachelor’s degree in Computer Science, Management Information Systems, Computer Engineering or related field from an accredited four-year college or university and at least two years of related programming experience and training. A minimum of two years in design and programming experience including some experience programming interactive programs. Experience must include exposure to systems analysis techniques.

KNOWLEDGE AND ABILITIES 
Knowledge:
Knowledge of VB.Net and/or C# as core programming language is essential; Integrated development environment (IDE) such as Microsoft Visual Studio; Source control management tools such as Team Foundation Server (TFS) and Git; JavaScript, HTML5, and Cascading Style Sheets (CSS) for developing web pages is highly desired; Oracle PL/SQL, SQL-Server T-SQL or similar SQL experience and understanding of relational database principles. Knowledge of software testing methodologies and tools, computer equipment and capabilities, data communications and local area networking, and client-server software is essential; Principles and programming techniques used to implement online interactive applications, technical report writing, systems analysis techniques, database management concepts, and management information system concepts; DevOps and related best practices; and knowledge of the Component-based Scalable Logical Architecture (CSLA) is an advantage.

Abilities:
Ability to write moderately complex programs and develop detailed program specifications; Demonstrate an understanding of MVC (Model-View-Controller; Stay up to date with related software development technologies through training, product research, and participating in conferences and user groups. Ability to work effectively with a broad, diverse cross-section of peers and various individual personalities; listen effectively, communicate with, and maintain a professional working relationship with co-workers; communicate clearly, efficiently, and professionally both over the phone and in person; Maintain strong organizational skills; and the ability to complete quality and timely work with minimal supervision.

SPECIAL REQUIREMENTS

Valid California Driver's License and insurance. 

This job has no supervisory responsibilities.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this Job, the employee is regularly required to sit and view and operate a computer, use hands to finger, handle, or feel, reach with hands and arms, and talk or hear. Requires manual finger dexterity and eye-hand coordination to operate and adjust office equipment such as computers. The employee is occasionally required to stand and walk. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, color vision, and the ability to adjust focus.

The noise level in the work environment is usually quiet.

All employees are responsible for contributing to an inclusive, safe, and secure work environment that values diverse cultures, perspectives, and experiences and is free from discrimination.

The mission of the Human Resources Department states: "Our Human Resources team recognizes that our employees power the City of San Jose and our success as a city is dependent on our ability to create a dynamic and engaged workforce. Our employees' ability to provide excellent service is strengthened when we invest in attracting talent, provide opportunities for career growth, enable an environment focused on health, safety, and wellness, and retain a diverse workforce in a workplace that is equitable and inclusive."

San Jose's Human Resources Department offers key strategic support to the City and is responsible for the following core services:
 

• Employee Benefits - Provide benefit programs that best meet the needs of employees, retirees, their dependents, and the City, assist participants in effectively utilizing their plans and promote employee wellness.
• Employment Services - Facilitate the City's ability to attract and hire a diverse and talented workforce.
• Health and Safety - Provide services that promote employee health, safety, and well-being.
• Learning and Development - Provide Citywide employee training and pipeline development programs that support employee recruitment, growth, engagement, and retention.

The Department also offers strategic support in Citywide Human Resources Systems Management and Records Management, Departmental Administration, Customer Service, Personnel Management, Financial Management, and Emergency Response and Recovery.The Human Resources Department is currently seeking to fill a full-time Division Manager of Benefits.

Salary range for this classification is: $131,187.68 - $207,658.10

This salary range(s) includes an approximate five percent (5%) ongoing non-pensionable compensation. Actual salary shall be determined by the final candidates' qualifications and experience.

The City is seeking a Division Manager to manage all services and activities in the Benefits Division of the Human Resources Department. The Benefits Manager will report to the Director of Human Resources and will be responsible for administering the City of San José's extensive benefits program, which includes insurance programs and other health, financial and professional benefits. The Director and Division Manager will work closely to make recommendations to the City Manager based on their evaluation of all benefits plans.

The City of San José's Department of Human Resources is a hard-working, customer-focused, and data-driven team. The Division Manager plays an integral role in ensuring that City employees are offered competitive, qualify and affordable benefits. The position requires someone who is well-organized, resourceful, and creative. The Division Manager role needs an individual with the ability to anticipate problems by proactively planning and a willingness to accept challenges. This person should be a strategic thinker and a confident decision-maker who works collaboratively to reach goals and determine solutions.

This position is open until filled. The first review of applications will be May 28, 2024. Applications are reviewed in the order received.

*Effective July 2024, this position will receive a 2.5% base salary increase.

THE POSITION

Reporting to the Director of Administrative Services, the Management Analyst (Risk Management) provides professional support to risk management programs including: workers' compensation, safety compliance, review and approval of contracts and Certificates of Insurance, risk transfer, and leave and disability administration. 

In addition, you will have the opportunity to coordinate and oversee workers' compensation claims administration including monitoring accepted claims and providing information to claimants, attorneys, and the workers' compensation carrier. You will also serve as a consultant to City departments and employees on Risk Management (workers' compensation, safety, contract insurance) problems and communicate regularly with internal and external parties to maximize the effectiveness and efficiency of assigned programs and activities, minimize risk, and advise of claim developments. This position will also support the City's leave management program.

To view the entire job description, click here.

ABOUT YOU

We are looking for a solution-focused problem solver who is responsive to organizational needs and open to new ideas and approaches to deliver HR services. Additionally, our ideal candidate will:

• Have a demonstrated ability to manage and organize multiple HR projects and priorities. 
• Understand and apply principles and practices of being an HR Business Partner.
• Have a strategic perspective and the ability to see the long-term impact of projects and initiatives.
• Be an outstanding communicator with exceptional interpersonal, analytical, written, verbal communication, and presentation skills.
• Proven technical skills and the desire to be a generalist in the HR functional areas assigned.

MINIMUM REQUIREMENTS

Possession of a bachelor's degree with major coursework in public or business administration, finance, human resources, economics, or a closely related field;

AND

Three (3) years of increasingly responsible professional experience performing public administration, finance, housing, or human resources functions; or

One (1) year of experience at a level equivalent to the City’s class of Associate Management Analyst or Administrative Analyst.

When assigned to a specific functional area as noted above, additional knowledge and experience in such area may be desirable.

Public sector experience is preferred.

Licenses and Certifications

• Possession of, or ability to obtain and maintain, a valid California Class C Driver's License and a satisfactory driving record is required. Individuals who do not meet this requirement due to a disability will be reviewed on a case-by-case basis. 

Final Filing Date:  First review of applications will be on June 7, 2024. NCPA reserves the right to close this posting once a sufficient number of applications have been received.
 

Under the direction of the IS Operations & Support Assistant Manager, the Database Administrator architects, tests, implements, maintains, and documents Agency databases. The database administrator collaborates closely with IS development and Agency operations personnel to provide backend database solutions for custom applications, including real-time, scheduling, and settlement programs. The database administrator troubleshoots and provides solutions for database problems.

Level III
This classification supports and maintains the Agency’s database infrastructure and related applications. Administers all database objects, including but not limited to schemas, tables, clusters, indexes, and views. Performs database re-organizations as needed to improve performance. Performs impact analysis of changes to be made to database objects before implementing significant schema changes. Ensures security for all databases by creating roles and associated privileges. Controls and monitors user access to databases. This is a journey-level position and is given minimal direction in job duties and responsibilities.  

Level IV
Architects and designs the Agency’s database infrastructure and ensures the highest levels of availability. Leads database projects to establish new database architectures. Oversees upgrades and implementations of new databases or related software.   Position can perform all lower level requirements and works independently with very little direction May be called upon to provide reports or present to the Agency’s Information Technology Committee. May direct the work of lower classifications.     

ESSENTIAL DUTIES AND RESPONSIBILITIES
This position requires that the incumbent reports for work on time and maintains satisfactory attendance in accordance with Agency policy; Ensures work responsibilities are covered when absent; Arrives to meetings and appointments on time; Performs special assignments for the Assistant Manager, Information Services or others as assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Responsibilities:
Design, create and maintain all Oracle databases required for development, testing, and production usage. 

Install, configure, upgrade, and troubleshoot Database server software for both stand-alone instances and Real Application Clusters (RAC). Includes patching both Oracle and Windows. 

Administer all database objects, including schemas, tables, clusters, indexes, views, sequences, constraints, packages, and procedures. This includes creating primary database storage structures (tablespaces) and primary objects (tables, views, indexes). Manage the sharing of resources between applications. 

Troubleshoot problems regarding the databases, servers, applications and development tools. Open technical support cases with support as needed and serve as primary support contact for NCPA. 

Perform capacity planning for all databases. Work closely with IS storage and system administration staff to plan and allocate database system storage. 

Experienced with creating, managing, and maintaining data warehouse technologies.

Perform ongoing monitoring and tuning of all database instances and Windows servers to optimize database performance and reliability. 

Plan and implement backup and recovery of Agency databases. Maintain remote standby databases using archive logs.

Implement and enforce security for all of the Databases through creating and maintaining users and roles, and assigning privileges. Control and monitor user access to the database. 

Perform database re-organizations as required to improve performance and ensure maximum uptime of the database. Modify the database structure from information given by application developers. Gather statistics, create indexes, create or expand tablespaces as needed. 

Perform SQL and PL/SQL tuning and performance monitoring. 

Set up and maintain documentation and standards for database practices and procedures. 

Provide technical support to application developers and database users. 

Perform impact analysis of changes to be made to database objects. Approve and implement/oversee significant schema changes and changes to database design. 

Provide support during non-standard hours (on an as-needed basis, on-call 24x7x365). 

Provide a strategic database direction for the organization.

MINIMUM QUALIFICATIONS

Level III:
Education and/or Experience
A bachelor’s degree from an accredited four-year college or university in Computer Science, Management Information Systems, Engineering, or a related field and five or more years of related experience and/or training, or an equivalent combination of education and experience.

Level IV: 
Education and/or Experience 
A bachelor’s degree from an accredited four-year college or university in Computer Science, Management Information Systems, Engineering, or a related field and eight or more years of related experience and/or training, or an equivalent combination of education and experience.

KNOWLEDGE AND ABILITIES 

Knowledge:
Knowledge of Oracle database; Oracle Recovery Manager (RMAN), Real Application Clusters (RAC); Oracle Automatic Storage Management (ASM), SQL, PL/SQL; Microsoft SQL Server; Windows; networking; virtual machines; batch/cmd scripting; PowerShell, SQL*Plus; Toad, GIT; physical database design; relational database theory; disaster recovery; back-up and recovery, relational database theory; Windows and Linux system administration; the Oracle optimizer and execution plans; troubleshooting and debugging, networking (TCP/IP), database security.

Abilities:
Ability to write complex programs and develop detailed program specifications; Ability to analyze data and situations, reason logically and creatively, identify problems, draw valid conclusions, and develop effective solutions; Ability to apply creative thinking in the design and development of methods of processing data with electronic computers; Ability to establish and maintain cooperative working relationships with those contacted in the course of the work; Ability to communicate effectively verbally and in writing, and prepare effective reports.

SPECIAL REQUIREMENTS

Valid California Driver's License and insurance as occasional travel may be required. 
While performing the duties of this job, the employee is regularly required to sit. The employee is occasionally required to stand and walk. Occasionally, the employee may be required to perform simple grasping and fine manipulation, use telephone, write or use a keyboard to communicate, crouch, crawl, reach and lift equipment up to 40 lbs. 

Level III: This job has no supervisory responsibilities. 

Level IV: This job may have supervisory responsibilities.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The noise level in the work environment is usually moderate.

All employees are responsible for contributing to an inclusive, safe, and secure work environment that values diverse cultures, perspectives, and experiences and is free from discrimination.
 

Overview:
Do you have Six (6) years' experience supporting Cyber Security network environments?  Are you ready for you next career opportunity? Consider a career in the water industry!
 
Provide complex and advanced technical assistance in support of managing and implementing Valley Water’s cyber security systems on the Enterprise network and SCADA/ Industrial Control System/ Operational Technology network. Monitor cyber security logs, respond to cyber security incidents, plan design, and implement a variety of complex cyber security systems assists with determining hardware and software systems requirements and specifications; performs a variety of complex technical tasks relative to assigned area of responsibility.
 
Serves as the technical lead on the design and implementation of Valley Water’s most complex and highly integrated Cyber Security systems involving new, unfamiliar, or emerging technologies; to perform the most complex professional level duties in the development, installation, coding, integration, documentation, testing, and maintenance of Cyber Security controls and systems; and to perform a variety of tasks relative to assigned areas of responsibility.

Key Responsibilities include, but are not limited to:
Cyber Security: monitor and maintain security on infrastructure systems including IT security applications and appliances. Example: Microsoft security patching, updating appliance firmware, maintaining Cyber Security definitions, monitoring Anti-Spam solution, monitoring Cyber Security appliances, and recommending modifications to existing Cyber Security hardware, software, and overall security stance. Manages and monitors vulnerability scanning tools and makes recommendations to remediate identified Cyber Security vulnerabilities. Manages Cyber Security audits and makes recommendations to remediate identified threats.
IT infrastructure: ensuring the network perimeter is protected, investigates security breaches and threats and recommends changes to address security issues; manages processes for operating system hardening, and intrusion detection; manages security configurations for server, database, and application systems; conducts electronic discovery searches, manages reporting on security enterprise tools; manages security software server/client updates, supports the Unit Manager in maintaining the Cyber Security program and policies.
IT/OT/ICS operational technology: Monitor network and security appliances for security breaches, updating firmware, maintaining security patches keeping security policies up to date, and maintaining documentation.
 
Ideal Candidate's Background Includes:
Applicants whose experience and background best match the ideal experience, knowledge, skills, abilities, and education are considered ideal candidates for the position. To determine the top candidates, each applicant will be assessed based on the ideal candidate criteria as listed below.

Ideal Experience:

• Six (6) years of increasingly responsible for cyber security scripting and analysis experience in cyber security.
• Risk Management experience.
• Ability to collaborate and communicate effectively with stakeholders.
• Experience researching, planning and implementation of cyber security technologies.
• Experience Monitoring cyber security logs and alerts.
• Experience responding to cyber security incidents on the SCADA/ Industrial Control System/ Operational Technology network.
• Experience working in enterprise environments. 

 Ideal Skills and Abilities:

• Install, maintain, operate, and troubleshoot complex computer systems hardware and software problems, including Firewalls, IPS, Next Generation Endpoint protection, reverse proxies, SIEM and Anti-Spam solutions.
• Develop and maintain Cyber Security policies.
• Breech response and mitigation.
• Assist in user training on computer systems hardware and software.
• Use diagnostic equipment to troubleshoot and diagnose network and communication systems hardware and software problems.
• Interpret and analyze complex user information systems requirements and develop solutions.
• Provide technical support for the implementation and maintenance of various software applications.
• Analyze and assess the technological needs of Valley Water departments.
• Communicate clearly and concisely, both orally and in writing.
• Establish and maintain effective working relationships with those contacted in the course of work.
• Utilizing Cyber Security Systems in a SCADA/ Industrial Control System/ Operational Technology network without impacting operations.

Ideal Knowledge:

• Principles and practices of computer science and information systems.
• Principles and practices of enterprise and cloud Cyber Security
• Knowledge of securing critical infrastructure for Supervisory Control and Data Acquisition (SCADA) / Industrial Control System/ Operational Technology environments.
• Operational characteristics of computer hardware and software; and/or audio-visual systems.
• Principles and practices of computer, network systems hardware, and software troubleshooting.
• Operational characteristics of various computer hardware, software applications, and computer operating systems.
• Operational characteristics of computer and network operating systems.
• Operational characteristics of local and wide area networks.
• Principles, practices, and responsibilities involved in leading the work of assigned staff.
• Best practices for office procedures, methods, and equipment.
• Common desktop applications and software as well as specialized software related to the work.

Ideal Training and Education:

• Equivalent to a Bachelor's degree from an accredited college or university with major course work in computer science, information systems or a related field.

Substitution:

• Directly related experience may be substituted for the college requirement on the basis of one and one-half years of experience for one year of education to a maximum of four years.

SENIOR CIVIL ENGINEER 
Utilities Department
$10,698.67 - $14,267.50 Monthly Plus Excellent Benefits
Opportunity to work a 9/80 schedule with every other Friday off.
5% salary increase scheduled for 7/1/24.

The City of Gilroy is an equal opportunity employer and supports workforce diversity, equity, inclusion, and belonging. Join our team! 


ABOUT THE POSITION
The City of Gilroy is currently recruiting a full-time Senior Civil Engineer for our brand new recently implemented Utilities Department. In this exciting opportunity the Senior Civil Engineer is poised to play a significant role in designing, implementing, and optimizing utility systems to ensure reliability, efficiency, and sustainability. The Senior Civil Engineer will help establish utility engineering standards, protocols, and infrastructure as it relates to water and wastewater for the City of Gilroy. The Senior Civil Engineer will work under the direction of the Utilities Director and will manage, review, and perform duties relative to Utility Engineering and construction activities, supervise assigned employees, will direct and perform complex professional-level field and office engineering assignments, and play an important part in making a real-world difference in the community. Bring your skill sets to make a major impact on Gilroy’s critical infrastructure!
 
A variety of Utility projects involve design, development, and construction of projects; therefore, exceptional project management skills are imperative to be successful in this role. You will collaborate with multidisciplinary teams to develop innovative solutions that address complex challenges, so your expertise and leadership will be instrumental in driving our projects to success. Additionally, the Senior Civil Engineer will manage assigned staff and consultants and assist with budgeting tasks. Furthermore, the Senior Civil Engineer will provide and participate in critical team leadership to ensure that all utility engineering services, goals, projects, and initiatives meet the high-performance standards of the Department and City.


THE TEAM AND DEPARTMENT
When you join our team, you will be at the forefront of revolutionizing the utilities industry. Our cutting-edge technologies and forward-thinking approach will enable us to provide sustainable solutions that meet the evolving needs of the Gilroy community. You will join a dynamic and innovative team and work amongst Engineering professionals who share a passion for serving the residents of Gilroy and improving the community. The Utilities department strives for excellence in engineering design and operational efficiency, integrity, and accountability in our decision making, respect, and teamwork to leverage collective expertise in solving complex challenges to achieve common goals.

EXCITING FIRST YEAR PROJECTS

• Utility Master Plan implementation 
• New Water Well Construction Project
• Lead multiple water line replacements
• Truck sewer line repairs  

 WHY THIS IS A GREAT JOB AND PLACE TO WORK

• Ability to work on cutting-edge projects that will shape the future of utilities for the City. 
• Opportunity for professional development and support career growth. 
• Opportunity to develop leadership and supervisorial skills and abilities. 
• The City of Gilroy has the feel of a “work family” to include a friendly and supportive working environment.
• Opportunity to work a 9/80 work schedule.

Overview:
The Associate Electrical Engineer will support the 24 x 7 continuous Water Utility raw, treated, and purified water operations, capital improvement projects, annual maintenance work plan, and asset management plans. They will be responsible for the planning, design, development, implementation, modification, installation, and maintenance of the Water Utility's critical electrical distribution systems in the area of water pumping, conveyance and treatment while ensuring work quality and adherence to professional codes, standards, and Valley Water specifications.
 
Raw water delivery operations depend on the reliable supply of electrical power for ensuring delivery of water-to-water treatment facilities, streams, and our customers. Water treatment and treated water delivery operations depend on the reliable supply of electrical power for ensuring delivery of safe, clean water to our customers in the Silicon Valley.

Key Responsibilities include, but are not limited to:
As a member of the Utility Electrical and Control Systems Engineering team:

• Plan, organize, schedule, assign, review, supervise and evaluate the work of assigned staff.
• Serve as a technical resource in electrical engineering including formulating projects, assessing program effectiveness, and analyzing a variety of unusual conditions, problems, or questions; oversee quality assurance and quality control activities within field/specialty of engineering.
• Conduct engineering studies, investigations, and analyses, such as conditional assessments, feasibility reports, event incident/root cause analysis reports, and engineering evaluations in support of a planned project/improvement, system deficiencies, non-code compliant conditions, and electrical system and process anomalies.
• Prepare electrical engineering schematics, specifications, drawings, wiring diagrams, power, lighting, and floor plans, conduit and wire schedules, electrical details, and other supporting documentation for commercial and industrial applications; perform economic and financial analysis of projects; provide cost estimates and cost benefit analysis for comparison; review and comment on drawings, plans, and other work submitted by external consultants, engineers, contractors, and developers for conformance with current standards.
• Identify and report electrical deficiencies and safety issues; investigate and create root cause analysis from electrical system reports; interview operations and maintenance staff and conduct field observations and inspections; develop recommendations to mitigate electrical disturbances, outages, and abnormalities; lead or assist in resolving deficiencies and safety issues.
• May grow into a supervisory role to plan, organize, schedule, assign, review, supervise and evaluate the work of assigned staff.

Ideal Candidate's Background Includes:
Applicants whose experience and background best match the ideal experience, knowledge, skills, abilities, and education are considered ideal candidates for the position. To determine the top candidates, each applicant will be assessed based on the ideal candidate criteria as listed below.

Ideal Experience:

• Strong academic background, with four (4) years of experience in planning, designing, developing, implementing, modifying, installing, and/or maintaining electrical power system projects. 
• Design, installation and troubleshooting experience in electrical power systems within an industrial plant/facilities environment.
• Bachelor's degree in electrical engineering (ABET accredited college/university). 
• Experience with a diverse set of projects, ranging from researching electrical and hardware components to troubleshooting and repairing existing electrical systems, is a plus.
• Experience in working with potential vendors with adequate information for bids working with potential vendors and evaluating bids preferred.

Ideal Skills and Abilities:

• Strong base of both technical and project skills, including ability to communicate in person and in writing and maintain positive and effective relationships in a team environment.
• Prepare and review electrical engineering designs, drawings, specifications, and other engineering project documentation.
• Set priorities and exercise sound independent judgment within established procedural guidelines.
• Conduct factory testing and field testing/startup of industrial electrical systems hardware and software.
• Perform research for electrical systems and hardware components and develop technical specification and plans.
• Mentor and develop entry level engineer. 
• Planning, designing, and inspecting all phases of electrical system engineering projects.
• Troubleshooting and repairing existing electrical systems (both hardware and software).
• Leading, coordinating, and implementing full cycle electrical systems projects ensuring no disruption of mission critical operations.
• Collaborating with project teams to ensure that projects in planning, design, and construction phases are abiding by electrical systems standards.
• Developing technical policies and procedures and making recommendations for changes and improvements to existing standards and procedures.

Ideal Knowledge:

• Operations, services, and activities of an industrial electrical system including electronic and electrical systems in water production, treatment, and distribution.
• Principles and practices of electrical engineering design and installation.
• Knowledge of electrical standards (NFPA, NEC, NETA), electrical software tools (SKM, SPM/PME, SKF tester)
• Principles and practices of project scheduling, management, and budgeting.

Ideal Training and Education:
Graduation from an accredited four-year college or university with major coursework in electrical engineering.
OR
Possession of a valid California Engineer-in-Training (EIT) Certificate with two (2) years of associated paraprofessional electrical engineering experience.