Search Jobs

Please visit this link to view the job posting:

https://www.governmentjobs.com/careers/marinwater/jobs/4516970/field-pipeline-locator-intern?pagetype=jobOpportunitiesJobs

Located in Middletown, CA!

The Mechanic Operator position consists of five levels of competency.  Individuals can either enter into the classification at the beginning level of the job or somewhere between the entry level and the top step depending on the qualifications brought with them.  It is the expectation of NCPA that all employees progress to the top level.  In order to progress to the top level an employee must complete all components in a competency level within the associated training matrix.  Employees who successfully complete a training level matrix and who received a rating of “meets requirements” or higher by their immediate supervisor will be promoted when qualified.  Upon completion/demonstration of competencies employees will be expected to perform work in all completed levels and other job-related duties as required. All employees have the right to challenge any component in the training matrix by proving proficiencies verbally and practically.

General Scope of the Job
Under general supervision of the Mechanical Maintenance Supervisor and at times under the general direction of the Mechanic Operator Lead Person; to maintain, repair, adjust, install, and test, powerplant steam field, water injection systems and equipment and maintain lease site grounds.  The measure of accuracy and reliability is the safe, effective and efficient performance of the Facilities.  This position is predominately mechanic based with operation support as outlined below.

Description of Duties and Responsibilities
Level III:
This level of the Mechanic Operator position requires the completion of all Level III training requirements. The employee must perform the duties as described below and as defined in lower levels while attaining Level IV skills and experience through academic and hands-on training. Level III knowledge and skills focus on journey level mechanical duties and responsibilities.
•    Inspects, tests, calibrates, installs, rebuilds, adjusts, repairs and aligns all mechanical equipment such as hydraulic control systems, turbines, generators, cooling tower, pumps, electric motors, valves, gear reducers, compressors, blowers heat exchangers, HVAC systems excluding refrigerant replacement, fire protection systems, diesel and gas engines, mufflers, separators, traps, rock catchers, tanks, pipeline and pipe supports.
•    Maintains facility structures. 
•    Performs basic inspections and repairs various rigging equipment, fixtures and cranes.
•    Assists the scaffolding qualified journeyman in maintaining, and repairing scaffolding. 
•    Inspects and maintains safety devices such as harnesses and rescue equipment.
•    Works with Safety Manager to maintain records of regulated equipment.
•    Keeps accurate records of equipment history, reports and work orders on computer for CMMS.  Works with CMMS personnel for accuracy and reliability.
•    Performs preventative maintenance and assessments on various plant equipment.
•    Writes Work/Operating Procedures within area of expertise.
•    Requisitions replacement parts and supplies to carry out assigned tasks.
•    Makes working drawings of components and changes made to Plant systems relative to area of expertise.
•    Installs, inspects, tests, repairs, rebuilds, and maintains equipment such as portable and fixed site pumps, valves, mufflers, separators, traps, rock catchers, turbines, generators, motors, gear reducers, compressors and hydraulic control systems, pipelines, tanks, pipeline supports, effluent piping components.
•    Maintains lease site grounds structures, culverts, roads, drains and ditches.
•    Examines and diagnoses malfunctions or defective equipment on pumps, motors, valves, separators, vents, air vacuum breakers and compressors; disassembles/reassembles, overhauls and adjusts defective equipment
•    Installs, fits and calibrates equipment replacement parts.  Observes equipment operation.  Adjusts equipment to operational specifications using specialized tools and precision measuring instruments.
•    Disassembles, removes, repairs, replaces, assembles and aligns pipes, pipeline components, and valves repairing or replacing broken and worn parts using various hand tools.
•    Observes and directs contractors while digging trenches, cleaning tanks and maintaining lease site grounds.
•    Under the direction and training of operations, assists with clearances on steam field and effluent pipeline equipment for maintenance purposes.
•    Will be trained to Rig and lift equipment to install, repair or replace equipment.
•    Instructs and trains workers in repair and maintenance procedures of steam field, power plant and effluent pipeline equipment.
•    Maintains inventory of tools and materials for the maintenance work at the steam field and effluent pipeline.
•    Maintains steam field equipment records on work completed on CMMS or equivalent maintenance program.
•    Assists other classifications when needed.
•    Performs other job-related duties as required.
•    Acquire OSHA certified training to meet business needs.
•    Trains and advises other workers in the maintenance and operation of steam field and effluent pipeline equipment.
•    Maintains and repairs Hydraulic Control Systems.

Level IV:
This level of the Mechanic Operator position requires the completion of all Level IV training requirements for operational duties and responsibilities.  The employee must perform the duties as described below and as defined in lower levels while attaining Level V skills and experience through academic and hands-on training.
•    Reviews, coordinates and reports work orders, work activities and equipment clearances with appropriate personnel.  
•    Checks equipment to be cleared in advance to guarantee its condition to others.  Informs Operator Technician Lead Person and Supervisors of the status of equipment and systems.  
•    Under direction of the Operator Technician Lead Person or a designee, operates various equipment and performs basic equipment clearances on low voltages (<600 volt) electrical breakers, steam line equipment and effluent equipment.  
•    Terminates and connects motor wiring to facilitate bearing repairs (less than 600 volts.).
•    Conducts online test of equipment before certifying its status and performance.

Machinist Duties and Responsibilities
•     Sets up and operates machine tools to repair or reproduce equipment parts and fittings working from blueprints or defective parts using precision tools and measuring instruments.
•    Fabricates special tools, rigging equipment and replacement parts to repair equipment.   
•    Fabricates, modifies, shapes and repairs equipment parts using a variety of metal working machines.
•    Chips, grinds, bores, and drills equipment parts.
•    Verifies conformance of finished work piece to specifications, using precision measuring instruments.
•    Calibrates, fits and assembles equipment parts according to drawings and specifications using machine tools, power tools, and measuring instruments.
•    Installs machined replacement parts; starts and observes equipment operation to detect malfunctions or out-of-tolerance performance, adjusts as necessary.
•    Maintains shop equipment and tools.
•    Maintains inventory of machining tools.

Representative Physical and Job Demands
•    Regularly talks and listens to others to exchange and obtain information to direct the operation and maintenance of Geothermal Facility steam field and effluent equipment.
•    Regularly reaches, grasps, pushes and pulls various wrenches, hand tools, and other objects using manual dexterity and eye hand coordination to operate and maintain equipment.
•    Regularly climb ladders and walks on platforms near high temperature surfaces; works on slippery or uneven surfaces in precarious places.
•    Frequently walks, reaches, kneels and crouches using feet, legs, hands and manual strength to access and operate plant equipment.
•    Occasionally lifts and moves pumps motors and pipe weighing up to 50 pounds.
•    Routinely works near heated surfaces; works on slippery or uneven surfaces in precarious places to adjust or operate equipment.
•    Occasionally exposed to high voltage and other electrical hazards while working on equipment.
•    Routinely works in outside weather conditions and is exposed to chemicals, wet and humid conditions, extreme cold and heat while inspecting and maintaining equipment.  The noise level is frequently very loud.
•    Routinely listens to operating sounds of equipment to diagnosis equipment malfunctions.
•    Frequently operates forklifts cranes, air compressors, sandblasters and power tools to maintain and repair equipment.
•    Frequently operates Agency vehicles going to and from job locations.

Job Expectations
Acquisition and Use of Technical Knowledge
•    Possesses or acquires as needed the ability to detect, diagnose disassemble and repair steam and water equipment with a fundamental knowledge of; turbine equipment, and auxiliary systems and their capabilities; operation processes, mechanical and electrical theory and background to operate equipment; measuring devices and hand tools for maintenance work; general contamination and control practices and procedures; basic math, geothermal powerplant rules and regulations; clearance procedures, physics including pump mechanics; basic principles of thermodynamics and fluid flow.  Given this basic knowledge, understands own role within the plant and how that role requires the use of knowledge applied to practical, day to day, operations and maintenance demands.  Hold self-accountable to acquire knowledge that may be needed when a job situation changes, new tasks are introduced to the job, or when improved performance requires acquiring extended or specialized information.
•    Possesses or acquires as needed an extensive knowledge of safety, fire, and security rules and procedures.  Given the emphasis of safety at the plant, uses knowledge to improve plant conditions and the organization’s safety record.
•    Acquires knowledge of operations and maintenance procedures on a continuing basis to stay current as a significant contributor to plant solutions, safety performance, and operations and maintenance improvements.
•    Confers with Operator Technician Lead Person or Operations Supervisor to resolve system problems and offers a variety of workable solutions to complex problems and report status of systems and equipment.  
•    Identifies problems or trends with systems and equipment early to prevent operator or electrical errors. 
•    Passes knowledge on to other employees as a way to contribute to the performance of others, or get a job done.
•    Assesses own limitations with the fundamental knowledge needed to perform in the job.

Application of Technical and General Job Skills
Technical and job skills are indicated by demonstrating an ability to:
•    Efficiently and effectively operate, control, and maintain equipment, and be accountable for aspects of the job at the Geothermal Facility. 
•    Implement or use existing methods to control the waste of time, money and material resources, such as:
o    Acting to improve work procedures 
o    Conserving resources 
o    Expediting a job
o    Completing a work assignment efficiently
o    Completing long term work in an orderly fashion
•    Work with management to identify and learn from mistakes made and apply what is learned to future situations or plant conditions.
•    Establish and maintain effective work relationships with those contacted in the performance of required duties.
•    Review own action to determine the cause of poor working relationships so those relationships can be improved
•    May be required to work extended hours and on normal days off.
•    Operate Agency vehicles and equipment safely.

Training and Experience Requirements
Level III: Completion of the NCPA Level III training program or three years of equivalent journey-level mechanical experience.
Level IV: Completion of the NCPA Level IV training program or three years of equivalent journey-level mechanical experience and operations experience.

Driver’s License Requirement
Possession of an unrestricted Class C California operator’s license issued by the State of California, Department of Motor Vehicles.  Possession and maintenance of a good driving record as demonstrated by the absence of multiple or serious traffic violations or accidents within the last three (3) years.

Desired Qualifications 
•    Possession, or ability to obtain with training, a Class A California operator’s license issued by the State of California Department of motor Vehicles.
•    Ability to set up and operates machine tools to repair or reproduce equipment parts and fittings working from blueprints or defective parts using precision tools and measuring instruments.
•    Ability to Fabricate special tools, rigging equipment and replacement parts to repair equipment.   
•    Ability to Fabricate, modifies, shapes and repairs equipment parts using a variety of metal working machines.
•    Chips, grinds, bores, and drills equipment parts.
•    Verifies conformance of finished work piece to specifications, using precision measuring instruments.
•    Calibrates, fits and assembles equipment parts according to drawings and specifications using machine tools, power tools, and measuring instruments.
•    Installs machined replacement parts; starts and observes equipment operation to detect malfunctions or out-of-tolerance performance, adjusts as necessary.

EOE

The Finance Department is recruiting for the position of Accounting Technician (Electronic Payments Technician)

This recruitment will close on June 4, 2024 at 5:00 PM (PT) or when the first 150 applications are received, whichever comes first. Interested applicants are encouraged to apply immediately. A resume must be submitted with the completed online application.

Applications submitted without a resume may not be considered. Only online applications will be accepted.

The Position:
This is a journey level accounting technical class and has the ability to perform the full range of duties assigned, with only occasional instruction or assistance as unique situations arise. Employees at this level are fully aware of the operating procedures and policies within the work unit and receive general supervision from an assigned supervisor or manager. Positions in this class may exercise technical and functional supervision over assigned staff.

Ideal Candidate

• Possess knowledge and experience in the theories, principles and practices of financial accounting
• Exercise independent judgment in the course of daily responsibilities
• Demonstrate exceptional skill in written and oral communication
• Work effectively under deadlines
• Create and maintain detailed, accurate, and highly organized financial records
• Perform computational tasks and other technical functions with speed and accuracy
• Possess the ability to compile and reconcile financial data using Excel spreadsheets
• Establish and maintain effective working relationships with internal and external customers

Job Responsibilities: 

• Performs specialized technical and highly detailed work in the preparation, reviewing and processing of financial bank statements and other related documents.
• Assists in providing instruction to other department employees regarding specialized procedures and requirements.
• Administer the Citywide electronic payments program and assist with processing web payments.
• Preparing staff reports and other communication related adoption and implementation of new payment methods.
• Reviews various documents and reports related to area of assignment for accuracy, completeness and compliance with departmental policies, laws and other regulations.
• Prepare monthly spreadsheet of credit card/merchant services transactions and request journals to charge respective departments.
• Calculates and reconciles special assessments.
• Provides information to City employees and others that requires the use of judgment and the interpretation of policies, laws, rules and procedures related to area of assignment.
• Monitors, review and reconcile electronic banking systems (Bank of America, CashPro, Check 21) and internet payment processors/gateways across the City’s enterprise system platforms.
• Reviews and reconciles electronic payment activity with bank statements, the City’s financial management system and credit card transactions related to payments and disputes.
• Coordinates billing processes with other departments and acts as the department contact for credit card machine.
• Resolving technical challenges among the various system components (payment platform, gateway, bank, enterprise system vendors, City IT systems).
• Sets up and monitors accounting ledgers related to area of assignment.
• Reviews and corrects project accounting time sheets and error reports.
• Adjusts journal entries to properly record financial transactions.
• Ensures data integrity of ledger related reports.
• Maintains City investment and debt service portfolios including receipts and statements, broker confirmations, account analysis statements and interest payments.
• Builds and maintains positive working relationships with co-workers, other City employees and the public, using good principles of customer service.

The Maintenance Operations Department is recruiting for the position of Street Maintenance Worker I. 

This recruitment will close on June 6, 2024 at 5:00 PM (PT) or when the first 250 applications are received, whichever comes first. Please apply promptly. A resume must be submitted with the completed online application. Applications submitted without a resume may not be considered. Only online applications will be accepted.

The current vacancy is assigned to Asphalt and Concrete. If you are interested in employment in this job classification, you should apply to ensure you are considered for future opportunities that may utilize the candidates from this recruitment.

Examples of Job Duties: 

• Cleans work sites and equipment.
• Perform installation of various traffic control devices and markings.
• Drives truck with trailer.
• Performs heavy physical labor including lifting, carrying heavy objects; and shoveling, raking, and leveling asphalt.
• Clears and cleans roadsides, gutters, culverts and other drainage facilities.
• Participates in the removal, repair and replacement of storm drainage pipe.
• Sets-up and removes traffic safety zones for construction.
• Works in all weather conditions and in all terrain conditions.
• Works at all times of day and night.
• Perform preventative maintenance, adjustments and minor repairs on equipment.
• Cleans equipment, grease, lubricate, and fuel vehicles.
• Perform inspection and cleaning of drain inlets and storm lines.

Asphalt and Concrete Assignment:

• Repairs and replaces asphalt and concrete.
• Applies, rake, and tamp asphalt to perform Class A patching, skin patching, and sand sealing surface cracks.
• Uses rake, shovel, and pick in street repair work.
• Removes failed asphalt.
• Sprays oil on excavated area and over patches.
• Selects proper tip and angle of cut for jackhammer.
• Operates compressor, jackhammer and other power tools.
• Under supervision operate loader, backhoe, or storm drain cleaning machines.
• Performs concrete repair work.
• Cuts lumber for concrete forms to proper size and place stakes.
• Breaks up and remove concrete.
• Spreads and level base rock.
• Mixes concrete; pour concrete into forms, tamp, jitterbug surface.
• Applies concrete finish with trowel, screed, float or other tools.
• Patch holes with fresh concrete.

 
Traffic Safety Assignment

• Replaces, maintains and repairs guard rails, traffic dividers, signs, and similar traffic control devices.
• Assists in determining color of paint to be applied to street markings.
• Selects proper stencils for street markings.
• Applies stripes and intervals for new street markings.
• Places stencils over old street markings, start compressor and spray inside stencils.
• Cleans and maintains spray equipment, including stencil truck; place and pick up traffic cones during the operation of the striping machine.
• Prepares traffic signs.
• Applies sheeting to metal sign blanks for background color, numbering and lettering.
• Trim sign edges.
• Assists with street sign installation.
• Participates in the installation of raised pavement markers.
• Operates striping machine.

Street Sanitation Assignment

• Controls and remove litter.
• Removes drain outlet cover.
• Cleans storm drains and lines using hand and power tools.
• Under supervision, operates storm drain cleaning machines.

Marginal Functions
All Assignments:

• Receives and responds to public questions concerning current and projected work projects, location of streets, and directions.
• Changes backhoe buckets and teeth.
• Other duties as assigned.

TO VIEW JOB ANNOUNCEMENT, CLICK JOB PDF OR JOB ANNOUNCEMENT URL BELOW.

The Application Programmer performs or assists in the design, documentation, coding, testing, and implementation of new application programs or enhancements to existing application programs consistent with the Software Development Life Cycle (SDLC) best practices and applicable computer programming standards and frameworks. The position is primarily responsible for the suite of Bid-to-Bill applications as well as other business applications in use by the Agency. The position will work with other developer staff and supervisor during probationary status to learn and develop proficiency in the use of the Agency's software development frameworks, processes, and documentation design standards.

ESSENTIAL DUTIES AND RESPONSIBILITIES
This position requires that the incumbent reports for work on time and maintains satisfactory attendance in accordance with Agency policy; Ensures work responsibilities are covered when absent; Arrives to meetings and appointments on time; Performs special assignments as assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Level I: 
This classification is an entry-level position that is not expected to perform with the same level of independence of direction and judgment as higher levels. The level I works closely with other senior-level CTAs and is often given direction to complete tasks, install and troubleshoot hardware and software, perform system upgrades, evaluate and apply patches to systems, work closely with customers, and provide application support through help desk requests, and creates and maintains documentation.

Level II: 
This classification requires having all Level I duties and responsibilities with a minimum of two years of experience in software application development. Level II receives occasional direction and guidance from other senior-level CTAs; otherwise, uses developed experience and professional judgment to successfully complete projects in accordance with defined requirements and established timelines.

Responsibilities:
•    Within a specific hardware and operating system environment, work to define and design the operating features of new programs or enhancements
•    Produce appropriate conceptual-level application documentation for review and approval by the supervisor
•    Produce appropriate programming documentation for the review of the Supervisor, with sufficient detail on which to base programming activities
•    Develop computer programs in accordance with design documentation, closely following coding standards and conventions used within NCPA
•    Test applications using prescribed test methodology and tools
•    Develop an implementation plan, prepare production rollout for approval by the supervisor, and coordinate with the Ops team to execute the rollout
•    Maintain and enhance software applications
•    Conduct independent communications with user departments in a cooperative and professional manner
•    Provide emergency system support outside normal working hours as needed, on a rotational basis with other department employees
•    Travel to NCPA remote field sites to provide support to remote users as needed 
•    Assist in the evaluation of proposed new or modified computer system hardware and software

MINIMUM QUALIFICATIONS

Level I:
Education and/or Experience      
Bachelor's degree in Computer Science, Management Information Systems, Computer Engineering, or related field from an accredited four-year college or university and at least six months of related programming experience and training.

Level II:
Education and/or Experience      
Bachelor’s degree in Computer Science, Management Information Systems, Computer Engineering or related field from an accredited four-year college or university and at least two years of related programming experience and training. A minimum of two years in design and programming experience including some experience programming interactive programs. Experience must include exposure to systems analysis techniques.

KNOWLEDGE AND ABILITIES 
Knowledge:
Knowledge of VB.Net and/or C# as core programming language is essential; Integrated development environment (IDE) such as Microsoft Visual Studio; Source control management tools such as Team Foundation Server (TFS) and Git; JavaScript, HTML5, and Cascading Style Sheets (CSS) for developing web pages is highly desired; Oracle PL/SQL, SQL-Server T-SQL or similar SQL experience and understanding of relational database principles. Knowledge of software testing methodologies and tools, computer equipment and capabilities, data communications and local area networking, and client-server software is essential; Principles and programming techniques used to implement online interactive applications, technical report writing, systems analysis techniques, database management concepts, and management information system concepts; DevOps and related best practices; and knowledge of the Component-based Scalable Logical Architecture (CSLA) is an advantage.

Abilities:
Ability to write moderately complex programs and develop detailed program specifications; Demonstrate an understanding of MVC (Model-View-Controller; Stay up to date with related software development technologies through training, product research, and participating in conferences and user groups. Ability to work effectively with a broad, diverse cross-section of peers and various individual personalities; listen effectively, communicate with, and maintain a professional working relationship with co-workers; communicate clearly, efficiently, and professionally both over the phone and in person; Maintain strong organizational skills; and the ability to complete quality and timely work with minimal supervision.

SPECIAL REQUIREMENTS

Valid California Driver's License and insurance. 

This job has no supervisory responsibilities.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this Job, the employee is regularly required to sit and view and operate a computer, use hands to finger, handle, or feel, reach with hands and arms, and talk or hear. Requires manual finger dexterity and eye-hand coordination to operate and adjust office equipment such as computers. The employee is occasionally required to stand and walk. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, color vision, and the ability to adjust focus.

The noise level in the work environment is usually quiet.

All employees are responsible for contributing to an inclusive, safe, and secure work environment that values diverse cultures, perspectives, and experiences and is free from discrimination.

The City of Burlingame is accepting applications for the position of Accountant I/II

Our diverse family of employees welcomes you to apply. We are a small city that gets a lot done, and each member of our team is vital to our success as an organization.

We recently asked our employees what they enjoyed most about working for the City of Burlingame, and their responses fell into five general categories:

• Colleagues
• Community
• Location
• The Work
• The Benefits

Browse the Burlingame Welcome Brochure for more information about why employees love  working here or view our City of Burlingame is a Great Place to Work Video: 

Welcome Brochure 

City of Burlingame is a Great Place to Work Video

THE OPPORTUNITY

The City of Pacifica is recruiting for a Public Works Superintendent within the Department of Public Works. Under direction of the Field Services Manager, the incumbents will be responsible for the field services of the Public Works Department. They will plan, organize, and direct the work of field personnel and perform related work as required. The incumbents will be assigned to oversee various subdivisions such as Streets, Streams, Storm Drains, Street Lighting, and Motor Pool programs.

THE DEPARTMENT

The Public Works Department is responsible for maintaining and repairing the City’s infrastructure and wastewater treatment operations in an efficient and cost-effective manner while providing a high level of customer service and a safe work environment for city employees. The Department maintains parks, playing fields and medians and keeps streets and trails clean and well-maintained. The Department also coordinates the tree program, cleans beaches and coordinates the City Beautification program.

The Public Works Department is organized into three divisions including Wastewater Treatment Operations, Field Services and Engineering. The Wastewater Treatment Operations includes the operation of the Calera Creek water treatment plant and management of the collection system. Field Services oversees the maintenance of city streets, parks, trees, vehicles and public facilities. The Engineering Division manages public infrastructure projects, transportation planning and maintenance and repair of the City’s infrastructure. The Public Works Department is supported by 56 full-time staff and an annual operating budget of $4.6 million, along with a FY2023-2028 CIP appropriation of $ 8.6 million. 

At the City of Pacifica, we are an equal opportunity employer and value diversity. All aspects of employment will be based on merit, competence, performance, and business needs. To us, equal opportunity employment is not just about compliance, it’s about who you are, how you can help our City and who you want to be. We are committed to creating an inclusive environment for all employees and community members. 

If interested, we invite you to explore this opportunity with us.  Please note, this recruitment closes on Friday, June 7, 2024 at 12:00 PM PST so apply today!

THE POSITION

This is a full-time, management position that requires significant independence, initiative, and discretion within established guidelines.  Duties may include but are not limited to the following:

• Plan, organize and direct the work of others involved in public works, operations, including  stream maintenance, tree management and maintenance including street light maintenance, maintenance of the Community Pier and other activities as required.
• Plan, organize and direct the work of others involved in public works operations.
• Assist in the recruitment and placement of new employees.
• Attend public meetings and functions as needed.
• Establish Division goals and maintain exceptional working relationships.

Please refer to attached job description for additional information.

Equipment Mechanic  or Supervising Equipment Mechanic

$39.53-$50.46 per hour (Equipment Mechanic)
$45.46-$58.02 per hour (Supervising Equipment Mechanic)

Closing Date: June 9, 2024 (11:59 p.m.)
Oral Board:  Week of June 17, 2024

This recruitment will be filled at the Equipment Mechanic or Supervising Equipment Mechanic. The salary will depend on the candidate's qualifications.

Are you a skilled mechanic who thrives in a fast-paced environment where no two days are the same? The Town of Los Gatos is recruiting for an Equipment Mechanic or Supervising Equipment Mechanic to join the Parks and Public Works Department. This is a great career opportunity for an independent, highly motivated, customer service-oriented, organized individual to:

• Oversee the maintenance and repair of about 100 vehicles, including emergency response vehicles, and a variety of equipment (e.g., generators, trailers, boom trucks, compressors, wheel loaders, street sweepers, etc.).
• Coordinate regular and preventative maintenance on all vehicles and equipment.
• Diagnose mechanical tissues and perform or coordinate the necessary repairs to ensure vehicles are in optimal working condition and meet proper safety protocols.
• Prioritize and schedule maintenance tasks to minimize downtime and ensure fleet readiness.
• Coordinate with vendors and suppliers to procure parts and equipment.
• Oversee the upfitting process for first responder vehicles, ensuring they are equipped with the necessary tools and technology to support emergency operations.
• Support maintenance of the Department's asset management software to track vehicle and equipment maintenance schedules and inventory.
• Provide excellent customer service to internal stakeholders, promptly responding to repair requests and informing them of maintenance progress. 
• Supervise a part-time mechanic.

For a complete list of duties, see the E Equipment Mechanic or Supervising Equipment Mechanic job classification.

 

The mission of the Human Resources Department states: "Our Human Resources team recognizes that our employees power the City of San Jose and our success as a city is dependent on our ability to create a dynamic and engaged workforce. Our employees' ability to provide excellent service is strengthened when we invest in attracting talent, provide opportunities for career growth, enable an environment focused on health, safety, and wellness, and retain a diverse workforce in a workplace that is equitable and inclusive."

San Jose's Human Resources Department offers key strategic support to the City and is responsible for the following core services:
 

• Employee Benefits - Provide benefit programs that best meet the needs of employees, retirees, their dependents, and the City, assist participants in effectively utilizing their plans and promote employee wellness.
• Employment Services - Facilitate the City's ability to attract and hire a diverse and talented workforce.
• Health and Safety - Provide services that promote employee health, safety, and well-being.
• Learning and Development - Provide Citywide employee training and pipeline development programs that support employee recruitment, growth, engagement, and retention.

The Department also offers strategic support in Citywide Human Resources Systems Management and Records Management, Departmental Administration, Customer Service, Personnel Management, Financial Management, and Emergency Response and Recovery.The Human Resources Department is currently seeking to fill a full-time Division Manager of Safety.

Salary range for this classification is: $131,187.68 - $207,658.10

This salary range(s) includes an approximate five percent (5%) ongoing non-pensionable compensation. Actual salary shall be determined by the final candidates' qualifications and experience.

The City is seeking a Division Manager to manage all services and activities in the Safety Division of the Human Resources Department. The Safety Manager will report to the Assistant Director of Human Resources and will be responsible for administering the City of San José's extensive safety program, which includes Worker's Compensation, Employee Health Services, Injury and Illness Prevention Programs, City Driving Program, Safety Show Voucher Program, and ergonomics. The Assistant Director and Division Manager will work closely to make recommendations to the City Manager based on their evaluation of all safety plans.

The City of San José's Department of Human Resources is a hard-working, customer-focused, and data-driven team. The Division Manager plays an integral role in ensuring that City employees have a safe and healthy work environment. The position requires someone who is well-organized, resourceful, and creative. The Division Manager role needs an individual with the ability to anticipate problems by proactively planning and a willingness to accept challenges. This person should be a strategic thinker and a confident decision-maker who works collaboratively to reach goals and determine solutions.