Search Jobs

The City of Livermore is currently accepting applications for the position of Water Resources Mechanic I/II.  There are 2 vacancies can be filled at the I or II level. Apply online at www.LivermoreCA.gov!

WR MECHANIC I - $6,757.36 - $8,199.65 MONTHLY
WR MECHANIC II - $7,621.28 - $9,249.76 MONTHLY

Water Resources Mechanics perform a wide range of tasks involving mechanical maintenance and repairs of pumps, plumbing systems, electric motors, compressors, piping, boilers, underground infrastructure, facilities and buildings, carpentry, HVAC systems, mechanical drives, gear boxes, blowers, collectors, belt filter presses, and chemical feed systems. The work is done at the Water Reclamation Plant, located at 101 West Jack London Boulevard in Livermore.

A Water Resources Mechanic I performs a range of tasks requiring journey level mechanical ability and aptitude. Work assignments are performed according to established rules and procedures. Independent judgment is required and is supported at regular intervals by supervisory review and direction. A Water Resources Mechanic II is distinguished from the WR Mechanic I by the possession of advanced journey level mechanical ability and aptitude and is responsible for solving more difficult technical problems.

Position Summary

Under general supervision, the Ferry Mechanic performs preventative, scheduled and unscheduled maintenance, trouble-shooting, repair, and modifications on structural, mechanical, electrical, hydraulic, piping and control systems found on ferry vessels and passenger terminals; performs related work as assigned. Responsibilities include record keeping and written verification of work accomplished.
 

Essential Responsibilities

• Working with computers on a daily basis for work scheduling, work order entry and work order reporting on the Districts electronic maintenance system in addition to notifications and communications.
• Conducts tests, analyses and measurements as directed to diagnose any unusual, erratic or malfunctioning occurrence in any shipboard or terminal system or component.
• Reports any unusual wear patterns, noise, pressure, temperature, or changes in voltage, current, cycles, resistance or any other indication of potential malfunction.
• References manufacturer schematics including blueprints, drawings and specifications to resolve maintenance issues.
• References parts catalogues and other sources to determine correct parts for specific applications.
• Performs inspections, preventive maintenance, repairs and overhauls as directed.
• Documents and records work performed and parts and materials used in the electronic maintenance system. 
• Reports all safety hazards and corrects unsafe situations immediately where possible.
• Immediately reports to supervisor any potential maintenance problem or condition which could cause a possible schedule delay.
• Maintains all work areas, special tools and equipment used in performing maintenance function, in a clean and orderly manner.
• Operate a forklift and other equipment/vehicles safely.
• Interacts on a regular basis with vessel operations personnel.
• Adheres to the safety and health rules and safe working practices applicable to job.
• Establishes and maintains effective working relationships with District employees, customers, vendors and all others contacted during the course of work using principles of excellent customer service. 
• Performs additional related duties as assigned.
• Regular and reliable attendance and performance required. 

Minimum Qualifications

Education and/or Experience: 

• Completion of a four (4) year apprenticeship program, or approved equivalent as a heavy equipment or marine mechanic OR four (4) years of progressively responsible journey level full-time work experience performing to the maintenance and repair of heavy equipment which should include mechanical, electrical or welding repair, and at least one year in an industrial environment.
• Experience in corrective and preventative maintenance records using a computer-based maintenance management information system
• Experience in utilizing MS Windows based software for data entry, work order processing and materials requisitioning

Required License:  

• Must possess and maintain a current, valid California driver's license and satisfactory driving record (Operates District Vehicles).
• No DUI’s or Reckless Driving codes within the last 7 years. 
• No more than two moving violations within the last 3 years.

Required Tools:

• Must have a full set of journey level hand tools to accomplish assigned work.

Hours:

• Shifts are scheduled based on seniority.
• The Ferry Maintenance Department operates 7 days per week, except Thanksgiving, Christmas, and New Year’s day.
• Must be available to work all shifts; some overtime maybe required to handle emergencies.

Physical Requirement:  

Requires frequent and extensive physical activities such as: lifting and manipulating up to 50 lbs., bending, standing, stooping, kneeling, twisting, climbing, gripping, and other movements related to essential duties. Work around fumes, odors and dust in an occasionally high noise level environment with appropriate personal protective equipment. Ability to work in a constant state of alertness and in a safe manner. Ability to wear a respirator and be fit tested. Must wear hearing protections when performing certain duties.

Required Knowledge, Skills and Abilities

Knowledge of:  

• Occupational health and safety rules and working practices applicable to this position. 
• Monitoring and inspection of propulsion and auxiliary machinery and other supporting systems (i.e., electrical, plumbing, electronics, hydraulics and HVAC in a commercial application.
• Maintenance and troubleshooting principles and best practices.

Skill in or Ability to:

• Understand, read and communicate (both orally and in writing) in Standard English.
• Interpreting and applying oral and written instructions in a consistent manner.
• Reading and reasoning skills to aid in troubleshooting equipment, understanding manufacture and engineering schematics and system drawings.
• Maintain corrective and preventative maintenance records using a computer-based maintenance management information system.
• Perform tasks with limited direction, and minimal supervision.
• Demonstrate ability to make logical decisions and sound judgments using common sense.

Desirable Knowledge, Skills and Abilities

• Machine shop fabrication skills, familiar with lathe and mill use for the purpose of modification and fabrication of components.
• Welding, steel and aluminum, in shop setting and on-site.
• Electrical/electronic systems, motor controllers, power distribution, PLCs, and ability to troubleshoot the same.
• Off-highway and/or marine diesel engine operation and maintenance

Please visit this link to view the job posting:

https://www.governmentjobs.com/careers/marinwater/jobs/4516970/field-pipeline-locator-intern?pagetype=jobOpportunitiesJobs

The City of San Mateo City Clerk’s Office is looking for a highly qualified Deputy City Clerk

Why Join our Department?

The Office of the City Clerk is a service department within the municipal government upon which the five-member City Council, all City departments, and the general public rely for information regarding the operations and legislative history of the City. The City Clerk serves as the liaison between the public and the City Council and provides related municipal services such as serving as the Elections Official, providing key staff for Council meetings and recording all Council action, and serving as records manager for the protection and preservation of the public record.

Look to some of the reasons why the City of San Mateo is a great place to work, https://www.youtube.com/watch?v=_GTIzeSpc_g

What You’ll Do

Under the general direction of the City Clerk, the Deputy City Clerk uses independent judgement to plan, organize, direct, and perform a variety of complex administrative, technical, and supervisory duties in support of the City Clerk Department’s day-to-day operations, primarily legislative operations and contract and process management. The Deputy City Clerk serves as the second in command within the City Clerk’s Department and provides backup to the City Clerk.  The Deputy City Clerk will provide a high level of administrative and technical support to the City Clerk and other departments and perform all duties of the City Clerk in his/her absence. Duties may include, but are not limited to, the following:

• Assists the City Clerk in performing the day to day functions of the City Clerk's office; and in the absence of the City Clerk, act as City Clerk, performing such duties as serving as the Clerk of the City Council, maintaining meeting protocols, parliamentary procedures and proper conduct, writing agenda reports, taking minutes, certifying ordinances, resolutions, agreements and other official documents, administer oaths of office and supervise staff.
• Reviews changes in law, regulations and guidelines for their effect on City Council and Advisory Body activities; evaluates the effect of such changes, and recommends and implements changes to policies and procedures as required for compliance. Participate in the development of an installation of new or revised programs, systems, procedures, and methods of operation; update and revise policies and procedures.
• Assists in the preparation of the annual budget for the Department; estimates staffing, equipment, and supply needs based upon recent trends and planned activities; monitors expenditures after budget adoption.
• Implements and manages the agenda production process including maintaining a deep knowledge of the agenda management software and process; training staff in the use of the software and process; and assists in deploying consistent agenda practices across the organization; coordinating with other departments on agenda content; enforcing work product standards and holding departments and higher classifications responsible for meeting standards and deadlines; and producing the agenda and agenda packet per state law and city requirements.
• Manages the publication of legal and public notices, for all Council bodies, in accordance with City, State and Federal law, and filing, indexing, certifying, processing for recordation, and safeguarding of all City Council proceedings.
• Maintains compliance with applicable Federal, State, local laws, relating to areas of responsibility, including but not limited to, California Elections Coe, the Brown Act, Political Reform Act, Conflict of Interest Code, and the Public Records Act.
• Oversees maintenance and development of City-wide records management initiatives.
• Assists the City Clerk in the administration and conduct of municipal elections and special events. Serves as Filing Officer for campaign and conflict of interest finance reporting.
• Serves as liaison to the County Registrar of Voters.
• Attends City Council meetings with the City Clerk to assist with operating the audio / visual / agenda / voting system and take minutes as required.  Responsible for after Council action including producing and maintaining official City records and documents in good order such as resolutions, ordinances, contracts, deeds, correspondence, inter-agency notifications and minutes.
• Prioritizes work of staff; develops and trains staff; conducts performance evaluations; approves actions regarding hiring, promoting, and disciplining; and approves recommendations on all employee actions.

The Deputy City Clerk receives general supervision from the City Clerk or higher level personnel and exercises direct supervision over management and administrative staff.

For a complete list of duties, reference our job specifications at https://www.cityofsanmateo.org/DocumentCenter/Home/Index/86c

Located in Middletown, CA!

The Mechanic Operator position consists of five levels of competency.  Individuals can either enter into the classification at the beginning level of the job or somewhere between the entry level and the top step depending on the qualifications brought with them.  It is the expectation of NCPA that all employees progress to the top level.  In order to progress to the top level an employee must complete all components in a competency level within the associated training matrix.  Employees who successfully complete a training level matrix and who received a rating of “meets requirements” or higher by their immediate supervisor will be promoted when qualified.  Upon completion/demonstration of competencies employees will be expected to perform work in all completed levels and other job-related duties as required. All employees have the right to challenge any component in the training matrix by proving proficiencies verbally and practically.

General Scope of the Job
Under general supervision of the Mechanical Maintenance Supervisor and at times under the general direction of the Mechanic Operator Lead Person; to maintain, repair, adjust, install, and test, powerplant steam field, water injection systems and equipment and maintain lease site grounds.  The measure of accuracy and reliability is the safe, effective and efficient performance of the Facilities.  This position is predominately mechanic based with operation support as outlined below.

Description of Duties and Responsibilities
Level III:
This level of the Mechanic Operator position requires the completion of all Level III training requirements. The employee must perform the duties as described below and as defined in lower levels while attaining Level IV skills and experience through academic and hands-on training. Level III knowledge and skills focus on journey level mechanical duties and responsibilities.
•    Inspects, tests, calibrates, installs, rebuilds, adjusts, repairs and aligns all mechanical equipment such as hydraulic control systems, turbines, generators, cooling tower, pumps, electric motors, valves, gear reducers, compressors, blowers heat exchangers, HVAC systems excluding refrigerant replacement, fire protection systems, diesel and gas engines, mufflers, separators, traps, rock catchers, tanks, pipeline and pipe supports.
•    Maintains facility structures. 
•    Performs basic inspections and repairs various rigging equipment, fixtures and cranes.
•    Assists the scaffolding qualified journeyman in maintaining, and repairing scaffolding. 
•    Inspects and maintains safety devices such as harnesses and rescue equipment.
•    Works with Safety Manager to maintain records of regulated equipment.
•    Keeps accurate records of equipment history, reports and work orders on computer for CMMS.  Works with CMMS personnel for accuracy and reliability.
•    Performs preventative maintenance and assessments on various plant equipment.
•    Writes Work/Operating Procedures within area of expertise.
•    Requisitions replacement parts and supplies to carry out assigned tasks.
•    Makes working drawings of components and changes made to Plant systems relative to area of expertise.
•    Installs, inspects, tests, repairs, rebuilds, and maintains equipment such as portable and fixed site pumps, valves, mufflers, separators, traps, rock catchers, turbines, generators, motors, gear reducers, compressors and hydraulic control systems, pipelines, tanks, pipeline supports, effluent piping components.
•    Maintains lease site grounds structures, culverts, roads, drains and ditches.
•    Examines and diagnoses malfunctions or defective equipment on pumps, motors, valves, separators, vents, air vacuum breakers and compressors; disassembles/reassembles, overhauls and adjusts defective equipment
•    Installs, fits and calibrates equipment replacement parts.  Observes equipment operation.  Adjusts equipment to operational specifications using specialized tools and precision measuring instruments.
•    Disassembles, removes, repairs, replaces, assembles and aligns pipes, pipeline components, and valves repairing or replacing broken and worn parts using various hand tools.
•    Observes and directs contractors while digging trenches, cleaning tanks and maintaining lease site grounds.
•    Under the direction and training of operations, assists with clearances on steam field and effluent pipeline equipment for maintenance purposes.
•    Will be trained to Rig and lift equipment to install, repair or replace equipment.
•    Instructs and trains workers in repair and maintenance procedures of steam field, power plant and effluent pipeline equipment.
•    Maintains inventory of tools and materials for the maintenance work at the steam field and effluent pipeline.
•    Maintains steam field equipment records on work completed on CMMS or equivalent maintenance program.
•    Assists other classifications when needed.
•    Performs other job-related duties as required.
•    Acquire OSHA certified training to meet business needs.
•    Trains and advises other workers in the maintenance and operation of steam field and effluent pipeline equipment.
•    Maintains and repairs Hydraulic Control Systems.

Level IV:
This level of the Mechanic Operator position requires the completion of all Level IV training requirements for operational duties and responsibilities.  The employee must perform the duties as described below and as defined in lower levels while attaining Level V skills and experience through academic and hands-on training.
•    Reviews, coordinates and reports work orders, work activities and equipment clearances with appropriate personnel.  
•    Checks equipment to be cleared in advance to guarantee its condition to others.  Informs Operator Technician Lead Person and Supervisors of the status of equipment and systems.  
•    Under direction of the Operator Technician Lead Person or a designee, operates various equipment and performs basic equipment clearances on low voltages (<600 volt) electrical breakers, steam line equipment and effluent equipment.  
•    Terminates and connects motor wiring to facilitate bearing repairs (less than 600 volts.).
•    Conducts online test of equipment before certifying its status and performance.

Machinist Duties and Responsibilities
•     Sets up and operates machine tools to repair or reproduce equipment parts and fittings working from blueprints or defective parts using precision tools and measuring instruments.
•    Fabricates special tools, rigging equipment and replacement parts to repair equipment.   
•    Fabricates, modifies, shapes and repairs equipment parts using a variety of metal working machines.
•    Chips, grinds, bores, and drills equipment parts.
•    Verifies conformance of finished work piece to specifications, using precision measuring instruments.
•    Calibrates, fits and assembles equipment parts according to drawings and specifications using machine tools, power tools, and measuring instruments.
•    Installs machined replacement parts; starts and observes equipment operation to detect malfunctions or out-of-tolerance performance, adjusts as necessary.
•    Maintains shop equipment and tools.
•    Maintains inventory of machining tools.

Representative Physical and Job Demands
•    Regularly talks and listens to others to exchange and obtain information to direct the operation and maintenance of Geothermal Facility steam field and effluent equipment.
•    Regularly reaches, grasps, pushes and pulls various wrenches, hand tools, and other objects using manual dexterity and eye hand coordination to operate and maintain equipment.
•    Regularly climb ladders and walks on platforms near high temperature surfaces; works on slippery or uneven surfaces in precarious places.
•    Frequently walks, reaches, kneels and crouches using feet, legs, hands and manual strength to access and operate plant equipment.
•    Occasionally lifts and moves pumps motors and pipe weighing up to 50 pounds.
•    Routinely works near heated surfaces; works on slippery or uneven surfaces in precarious places to adjust or operate equipment.
•    Occasionally exposed to high voltage and other electrical hazards while working on equipment.
•    Routinely works in outside weather conditions and is exposed to chemicals, wet and humid conditions, extreme cold and heat while inspecting and maintaining equipment.  The noise level is frequently very loud.
•    Routinely listens to operating sounds of equipment to diagnosis equipment malfunctions.
•    Frequently operates forklifts cranes, air compressors, sandblasters and power tools to maintain and repair equipment.
•    Frequently operates Agency vehicles going to and from job locations.

Job Expectations
Acquisition and Use of Technical Knowledge
•    Possesses or acquires as needed the ability to detect, diagnose disassemble and repair steam and water equipment with a fundamental knowledge of; turbine equipment, and auxiliary systems and their capabilities; operation processes, mechanical and electrical theory and background to operate equipment; measuring devices and hand tools for maintenance work; general contamination and control practices and procedures; basic math, geothermal powerplant rules and regulations; clearance procedures, physics including pump mechanics; basic principles of thermodynamics and fluid flow.  Given this basic knowledge, understands own role within the plant and how that role requires the use of knowledge applied to practical, day to day, operations and maintenance demands.  Hold self-accountable to acquire knowledge that may be needed when a job situation changes, new tasks are introduced to the job, or when improved performance requires acquiring extended or specialized information.
•    Possesses or acquires as needed an extensive knowledge of safety, fire, and security rules and procedures.  Given the emphasis of safety at the plant, uses knowledge to improve plant conditions and the organization’s safety record.
•    Acquires knowledge of operations and maintenance procedures on a continuing basis to stay current as a significant contributor to plant solutions, safety performance, and operations and maintenance improvements.
•    Confers with Operator Technician Lead Person or Operations Supervisor to resolve system problems and offers a variety of workable solutions to complex problems and report status of systems and equipment.  
•    Identifies problems or trends with systems and equipment early to prevent operator or electrical errors. 
•    Passes knowledge on to other employees as a way to contribute to the performance of others, or get a job done.
•    Assesses own limitations with the fundamental knowledge needed to perform in the job.

Application of Technical and General Job Skills
Technical and job skills are indicated by demonstrating an ability to:
•    Efficiently and effectively operate, control, and maintain equipment, and be accountable for aspects of the job at the Geothermal Facility. 
•    Implement or use existing methods to control the waste of time, money and material resources, such as:
o    Acting to improve work procedures 
o    Conserving resources 
o    Expediting a job
o    Completing a work assignment efficiently
o    Completing long term work in an orderly fashion
•    Work with management to identify and learn from mistakes made and apply what is learned to future situations or plant conditions.
•    Establish and maintain effective work relationships with those contacted in the performance of required duties.
•    Review own action to determine the cause of poor working relationships so those relationships can be improved
•    May be required to work extended hours and on normal days off.
•    Operate Agency vehicles and equipment safely.

Training and Experience Requirements
Level III: Completion of the NCPA Level III training program or three years of equivalent journey-level mechanical experience.
Level IV: Completion of the NCPA Level IV training program or three years of equivalent journey-level mechanical experience and operations experience.

Driver’s License Requirement
Possession of an unrestricted Class C California operator’s license issued by the State of California, Department of Motor Vehicles.  Possession and maintenance of a good driving record as demonstrated by the absence of multiple or serious traffic violations or accidents within the last three (3) years.

Desired Qualifications 
•    Possession, or ability to obtain with training, a Class A California operator’s license issued by the State of California Department of motor Vehicles.
•    Ability to set up and operates machine tools to repair or reproduce equipment parts and fittings working from blueprints or defective parts using precision tools and measuring instruments.
•    Ability to Fabricate special tools, rigging equipment and replacement parts to repair equipment.   
•    Ability to Fabricate, modifies, shapes and repairs equipment parts using a variety of metal working machines.
•    Chips, grinds, bores, and drills equipment parts.
•    Verifies conformance of finished work piece to specifications, using precision measuring instruments.
•    Calibrates, fits and assembles equipment parts according to drawings and specifications using machine tools, power tools, and measuring instruments.
•    Installs machined replacement parts; starts and observes equipment operation to detect malfunctions or out-of-tolerance performance, adjusts as necessary.

EOE

First Review of Applications

The first review of applications is June 3, 2024, at 12:00 p.m. (PST).  This recruitment may close without notice after this date so interested applicants are encouraged to apply immediately. A resume, response to the writing prompt, and supplemental questionnaire (part of the online application) must be submitted with the completed City application.

To be considered for this outstanding employment opportunity, please complete an application online.

Writing Prompt

Scenario: You are a Management Analyst in the City Manager’s Office tasked with researching and analyzing policies relevant to homeless services and mitigation practices.

In March 2024, California passed Proposition 1. Proposition 1 authorizes $6.4 billion in bonds to pay for major projects such as housing for veterans and mental health, drug, and/or alcohol facilities.  Proposition 1 will also shift how revenue from the 1% tax on income above $1 million is spent under the law. Proposition 1 renames the Mental Health Services Act (2004) to the Behavioral Health Services Act and expands its purpose to include substance use disorders, including for persons without a mental illness.

The City of Fremont’s Homelessness Response Team is drafting a Homelessness Response Plan for Fremont. The Team will be presenting the plan to City Council in May 2024 for study and potential adoption.

Candidate Task: Draft a memorandum addressing Proposition 1 and its potential impact on the City’s Fremont Homelessness Response Planning strategies. Please include:

• Proposition 1’s possible fiscal impacts
• Recommended changes to Strategy 1, 2, 3, 4, and 5 in the Fremont Homelessness Response Planning

Resources:

Fremont’s Homelessness Response Planning

City of Fremont 2022 Homeless Point-In-Time Count & Survey

City of Fremont Homelessness Response Website

Selection Process
The process may include individual and/or panel interviews, professional reference checks, fingerprint check for criminal history and other related components. Only those candidates who have the best combination of qualifications in relation to the requirements and duties of the position will continue in the selection process. Meeting the minimum qualifications does not guarantee an invitation to participate in the process.

Reasonable Accommodation
Human Resources will make reasonable efforts in the examination process to accommodate persons with disabilities. Please advise Human Resources of any special needs a minimum of 5 days in advance of the selection process by calling (510) 494-4660 or emailing humanresources@fremont.gov.
 
Contact Us
For additional information, please contact Human Resources Department at: humanresources@fremont.gov.
 
The information contained herein is subject to change and does not constitute either an expressed or implied contract. 

Please see the Management Analyst I and Management Analyst II job specifications for the full job descriptions.

TO VIEW JOB ANNOUNCEMENT, CLICK JOB PDF OR JOB ANNOUNCEMENT URL BELOW.

The Application Programmer performs or assists in the design, documentation, coding, testing, and implementation of new application programs or enhancements to existing application programs consistent with the Software Development Life Cycle (SDLC) best practices and applicable computer programming standards and frameworks. The position is primarily responsible for the suite of Bid-to-Bill applications as well as other business applications in use by the Agency. The position will work with other developer staff and supervisor during probationary status to learn and develop proficiency in the use of the Agency's software development frameworks, processes, and documentation design standards.

ESSENTIAL DUTIES AND RESPONSIBILITIES
This position requires that the incumbent reports for work on time and maintains satisfactory attendance in accordance with Agency policy; Ensures work responsibilities are covered when absent; Arrives to meetings and appointments on time; Performs special assignments as assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Level I: 
This classification is an entry-level position that is not expected to perform with the same level of independence of direction and judgment as higher levels. The level I works closely with other senior-level CTAs and is often given direction to complete tasks, install and troubleshoot hardware and software, perform system upgrades, evaluate and apply patches to systems, work closely with customers, and provide application support through help desk requests, and creates and maintains documentation.

Level II: 
This classification requires having all Level I duties and responsibilities with a minimum of two years of experience in software application development. Level II receives occasional direction and guidance from other senior-level CTAs; otherwise, uses developed experience and professional judgment to successfully complete projects in accordance with defined requirements and established timelines.

Responsibilities:
•    Within a specific hardware and operating system environment, work to define and design the operating features of new programs or enhancements
•    Produce appropriate conceptual-level application documentation for review and approval by the supervisor
•    Produce appropriate programming documentation for the review of the Supervisor, with sufficient detail on which to base programming activities
•    Develop computer programs in accordance with design documentation, closely following coding standards and conventions used within NCPA
•    Test applications using prescribed test methodology and tools
•    Develop an implementation plan, prepare production rollout for approval by the supervisor, and coordinate with the Ops team to execute the rollout
•    Maintain and enhance software applications
•    Conduct independent communications with user departments in a cooperative and professional manner
•    Provide emergency system support outside normal working hours as needed, on a rotational basis with other department employees
•    Travel to NCPA remote field sites to provide support to remote users as needed 
•    Assist in the evaluation of proposed new or modified computer system hardware and software

MINIMUM QUALIFICATIONS

Level I:
Education and/or Experience      
Bachelor's degree in Computer Science, Management Information Systems, Computer Engineering, or related field from an accredited four-year college or university and at least six months of related programming experience and training.

Level II:
Education and/or Experience      
Bachelor’s degree in Computer Science, Management Information Systems, Computer Engineering or related field from an accredited four-year college or university and at least two years of related programming experience and training. A minimum of two years in design and programming experience including some experience programming interactive programs. Experience must include exposure to systems analysis techniques.

KNOWLEDGE AND ABILITIES 
Knowledge:
Knowledge of VB.Net and/or C# as core programming language is essential; Integrated development environment (IDE) such as Microsoft Visual Studio; Source control management tools such as Team Foundation Server (TFS) and Git; JavaScript, HTML5, and Cascading Style Sheets (CSS) for developing web pages is highly desired; Oracle PL/SQL, SQL-Server T-SQL or similar SQL experience and understanding of relational database principles. Knowledge of software testing methodologies and tools, computer equipment and capabilities, data communications and local area networking, and client-server software is essential; Principles and programming techniques used to implement online interactive applications, technical report writing, systems analysis techniques, database management concepts, and management information system concepts; DevOps and related best practices; and knowledge of the Component-based Scalable Logical Architecture (CSLA) is an advantage.

Abilities:
Ability to write moderately complex programs and develop detailed program specifications; Demonstrate an understanding of MVC (Model-View-Controller; Stay up to date with related software development technologies through training, product research, and participating in conferences and user groups. Ability to work effectively with a broad, diverse cross-section of peers and various individual personalities; listen effectively, communicate with, and maintain a professional working relationship with co-workers; communicate clearly, efficiently, and professionally both over the phone and in person; Maintain strong organizational skills; and the ability to complete quality and timely work with minimal supervision.

SPECIAL REQUIREMENTS

Valid California Driver's License and insurance. 

This job has no supervisory responsibilities.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this Job, the employee is regularly required to sit and view and operate a computer, use hands to finger, handle, or feel, reach with hands and arms, and talk or hear. Requires manual finger dexterity and eye-hand coordination to operate and adjust office equipment such as computers. The employee is occasionally required to stand and walk. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, color vision, and the ability to adjust focus.

The noise level in the work environment is usually quiet.

All employees are responsible for contributing to an inclusive, safe, and secure work environment that values diverse cultures, perspectives, and experiences and is free from discrimination.

THE OPPORTUNITY

The City of Pacifica is recruiting for a Public Works Superintendent within the Department of Public Works. Under direction of the Field Services Manager, the incumbents will be responsible for the field services of the Public Works Department. They will plan, organize, and direct the work of field personnel and perform related work as required. The incumbents will be assigned to oversee various subdivisions such as Streets, Streams, Storm Drains, Street Lighting, and Motor Pool programs.

THE DEPARTMENT

The Public Works Department is responsible for maintaining and repairing the City’s infrastructure and wastewater treatment operations in an efficient and cost-effective manner while providing a high level of customer service and a safe work environment for city employees. The Department maintains parks, playing fields and medians and keeps streets and trails clean and well-maintained. The Department also coordinates the tree program, cleans beaches and coordinates the City Beautification program.

The Public Works Department is organized into three divisions including Wastewater Treatment Operations, Field Services and Engineering. The Wastewater Treatment Operations includes the operation of the Calera Creek water treatment plant and management of the collection system. Field Services oversees the maintenance of city streets, parks, trees, vehicles and public facilities. The Engineering Division manages public infrastructure projects, transportation planning and maintenance and repair of the City’s infrastructure. The Public Works Department is supported by 56 full-time staff and an annual operating budget of $4.6 million, along with a FY2023-2028 CIP appropriation of $ 8.6 million. 

At the City of Pacifica, we are an equal opportunity employer and value diversity. All aspects of employment will be based on merit, competence, performance, and business needs. To us, equal opportunity employment is not just about compliance, it’s about who you are, how you can help our City and who you want to be. We are committed to creating an inclusive environment for all employees and community members. 

If interested, we invite you to explore this opportunity with us.  Please note, this recruitment closes on Friday, June 7, 2024 at 12:00 PM PST so apply today!

THE POSITION

This is a full-time, management position that requires significant independence, initiative, and discretion within established guidelines.  Duties may include but are not limited to the following:

• Plan, organize and direct the work of others involved in public works, operations, including  stream maintenance, tree management and maintenance including street light maintenance, maintenance of the Community Pier and other activities as required.
• Plan, organize and direct the work of others involved in public works operations.
• Assist in the recruitment and placement of new employees.
• Attend public meetings and functions as needed.
• Establish Division goals and maintain exceptional working relationships.

Please refer to attached job description for additional information.

Glenn County Health and Human Services Agency is seeking a dedicated and compassionate individual to serve as a Volunteer Behavioral Health Hearing Officer. In this role, you will play a vital part in ensuring fair and just hearings for individuals facing behavioral health challenges. As a Hearing Officer, you will be responsible for conducting hearings, reviewing cases, and making decisions that uphold the rights and well-being of those involved. This position offers a unique opportunity to contribute to the mental health and overall welfare of your community. This role meets all requirements for a hearing officer set forth by CA Welf & Inst Code § 5256.1 (2022).
 

MINIMUM QUALIFICATIONS

Experience: Five years' experience in mental health.

License: The certification review hearing officer shall be either a state qualified administrative law hearing officer, a physician and surgeon, a licensed psychologist, a registered nurse, a lawyer, a certified law student, a licensed clinical social worker, a licensed marriage and family therapist, or a licensed professional clinical counselor.