Search Jobs

The City of Lincoln is hiring for the position of Maintenance Worker I/II within the Streets Division of the Public Works Department.  Under general supervision, this position performs the full array of duties assigned to classes in the Maintenance Worker series including maintenance, construction and equipment operation work in one or more Public Works divisions; occasionally assists in the training of lower-level Maintenance Workers; and performs other related duties as required.

Maintenance Worker I

The Maintenance Worker I is the entry level class responsible for a wide variety of maintenance and construction tasks. This classification is alternatively staffed with Maintenance Worker II and incumbents may advance to the higher-level after gaining experience and demonstrating a level of proficiency that meets the qualifications of the higher-level class.

Maintenance Worker II

The Maintenance Worker II is the journey level class responsible for a wide variety of maintenance and construction tasks. This classification is distinguished from the next higher classification of Senior Maintenance Worker in that the latter performance the more complex assignments and lead responsibilities.

 

SUPERVISION RECEIVED/EXERCISED

The Maintenance Worker I receives general supervision from a Public Works Supervisor.  Incumbents of this class do not routinely exercise supervision.  The Maintenance Worker II receives general supervision from a Public Works Supervisor. May exercise technical and functional supervision over assigned staff. 

 

ESSENTIAL FUNCTIONS

Include but are not limited to the following:

• Performs maintenance, repair, construction, equipment operation and installation work in streets, water, sewers, refuse collection, parks and buildings.
• Streets: Breaks, removes, crack seals, hydropatches, and repairs surfaces; digs, shovels, hauls, loads and unloads materials; operates jack hammers, tampers, pavement breakers and other hand and power tools; rolls and irons asphalt; operates trucks, backhoes, rollers, pavers, street sweepers and other construction vehicles and equipment; assists in the installation and maintenance of City signs, road markings, striping and delineators; paints street lines and crosswalks; performs concrete sidewalk, curb, gutter and ramp installation and repair; installs, maintains and repairs street lights; installs shoring and trench plates; monitors underground service alert (USA’s) and marks when necessary; conducts street leaf pickup; mows roadsides.
• Water Distribution and Drainage: Constructs, maintains and repairs storm conduits, curbs, gutters and drainage facilities; installs, repairs and maintains water mains and lines; conducts maintenance at well sites; monitors pump stations; operates jack hammers and other tools and equipment; inspects tools and equipment for safety and mechanical defects; installs and repairs water service connections, meters and boxes; performs monthly meter reads; repairs, installs and tests hydrants; monitors USA’s and marks when necessary; operates trucks and other construction vehicles and equipment; locates and repairs leaks in water lines; cleans storm drains, flood control facilities and inlets; operates sewer camera and hydrovac.
• Parks and Buildings: Maintains lawns, shrubs, and trees; assists in spraying of herbicides and pesticides; cuts, sprays and removes weeds; clears brush and debris; assists with planting and maintenance of landscaped areas; installs, maintains, repairs and programs irrigation systems; cleans and maintains parks and city buildings; assists in the performance of minor carpentry, plumbing, electrical, painting and remodeling tasks.
• Solid Waste: Operates a variety of collection vehicles and equipment including front, rear and side loaders in the collection and transportation of residential and commercial refuse; drives to landfill site when vehicle is full and unloads material; evaluates and updates assigned routes; cleans, maintains and inspects assigned vehicles; maintains daily logs.
• Fills out reports and work orders; climbs or uses hydraulic aerial devices to top, trim, reshape, strip, treat and remove trees; operates airport fueling vehicles; responds to after-hours call-outs if assigned.
• Demonstrates a full understanding of applicable policies, procedures and work methods associated with assigned duties; may provide training to lower-level staff; responds to questions and concerns from the general public; provides information as is appropriate and resolves public service complaints.
• Responds to questions and concerns from the general public; provides information as is appropriate and resolves public service complaints.
• Establishes positive working relationships with representatives of community organizations, state/local agencies, City management and staff, and the public.

 

PHYSICAL, MENTAL AND ENVIRONMENTAL WORKING CONDITIONS

Position requires sitting, standing, walking on level and slippery surfaces, reaching, twisting, turning, kneeling, bending, stooping, squatting, crouching, grasping and making repetitive hand movement in the performance of daily duties. The position also requires both near and far vision when inspecting work and operating assigned equipment. The need to lift, carry and push tools, equipment and supplies weighing 25 pounds or more is also required. Additionally, the incumbent in this outdoor position works in all weather conditions including wet, hot and cold. The incumbent may use cleaning and lubricating chemicals, pesticides or herbicides which may expose the employee to fumes, dust and air contaminants. The nature of the work also requires the incumbent to climb ladders, use power and noise producing tools and equipment, operate hydraulic aerial devices, drive motorized vehicles and heavy equipment, work in heavy vehicle traffic conditions and often work with constant interruptions.

 

KNOWLEDGE/SKILLS/ABILITIES

The following are a representative sample of the KSA’s necessary to perform essential duties of the position:

Knowledge of: Practices, techniques and materials used in maintenance, construction and repair of streets, buildings, parks and water treatment facilities; knowledge of the City street system; applicable federal, state and local laws, codes and regulations; operating characteristics and safety requirements for operation of trucks, refuse vehicles and other heavy and light equipment; defensive driving; proper lifting procedures; methods and techniques for record keeping; basic principles of mathematics; occupational hazards and standard safety procedures.

Skill to: Safely and effectively operate a variety of maintenance equipment, tools and materials.

Ability to: Perform maintenance, repair and installation of asphalt, signs, concrete, water mains and storm drains; drive and operate trucks and heavy construction equipment; respond to issues and concerns from the community; interpret, explain and apply applicable laws, codes and regulations; operate a variety of construction equipment, vehicles and power and hand tools; perform heavy manual labor for extended periods of time; work at substantial heights; respond to after-hours call-outs if assigned; organize, prioritize and follow-up on work assignments; work independently and as part of a team; make sound decisions within established guidelines; analyze a complex issue, and develop and implement an appropriate response; follow written and oral directions; observe safety principles and work in a safe manner; communicate clearly and concisely, both orally and in writing; establish and maintain effective working relationships.

 

THE SELECTION PROCESS

The process may include an in-basket exercise, individual interviews, panel interviews and/or other related components.  Only those candidates who have the best combination of qualifications in relation to the requirements and duties of the position will continue in the selection process. Meeting the minimum qualifications does not guarantee an invitation to the process. The candidate selected for the position will be required to complete a background check including reference checks, fingerprint check, medical/drug-test evaluation and/or other related components.

Human Resources will make reasonable efforts in the examination process to accommodate persons with disabilities.  Please advise HR of any special needs a minimum of five days in advance of the selection process exam by calling (916) 434-3229. The City of Lincoln is an Equal Opportunity Employer.

The information contained herein is subject to change and does not constitute either an expressed or implied contract.

Apply Immediately- Open until a Maximum number of 25 applications received

Written Exam: TBD

Oral Exams: TBA

Resumes are not accepted in lieu of completing a City application. Incomplete applications will not be accepted.

This full time position is in Civil Service.

DEFINITION

Under general supervision, the Plant Operator II during an assigned shift is responsible for operation of the wastewater treatment plant and for maintaining a variety of machinery and equipment.

EXAMPLES OF DUTIES

Monitors the operation of the wastewater treatment plant; operates treatment facility equipment such as settling tanks, pumps, activated sludge process, digesters, centrifuge, chlorinators and valves to control flow and processing of wastewater sludge and effluent; monitors gauges, dials, meters and control panels, and other recording instruments, interpreting results to determine processing requirements, and records data; oils, greases, and cleans equipment; services and maintains a variety of plant equipment; extracts samples and performs laboratory tests and analysis; inspects plant equipment and facilities to locate and report needed repairs; performs general plant maintenance work, such as sweeping, cleaning, sanding, and painting; performs general grounds maintenance work; maintains routine and daily records and shift logs; assists in the training of other plant operators, makes operating decisions in the absence of supervisory personnel; may have to work under adverse conditions.

MINIMUM QUALIFICATIONS

 

Knowledge of: The operation and routine maintenance of mechanical equipment, including pumps and electrical motors; control procedures for wastewater treatment processes; tools, equipment and methods used in the overhaul, repair, adjustment and modification of stationary power equipment, and of the pumping, piping, and electrical systems used in the water quality control plant; sewage treatment processes and the laboratory tests used to check the effectiveness of such processes.

Ability to: Operate equipment used in a water quality control plant, make standard laboratory tests of sewage, receiving waters and sludge and interpret such tests; read and interpret gauges and recording devices reflecting plant operations; adjust treatment processes as indicated by plant conditions; perform mechanical repairs, maintenance work, and modification to equipment used in a water quality control plant; use various mechanic's tools with skill and accuracy; adapt to day, swing or graveyard work shift; follow oral and written directions; perform heavy manual labor involving lifting, carrying, kneeling, crawling and climbing; work in adverse conditions which require exposure to noise, noxious smells, gases, contact with wastewater, and risk of bodily injury; interact positively and cooperate with co-workers, respond politely to customers, work as a team member, function under demanding time pressure, respond in a positive manner to supervision, and attend work and perform duties on a regular and consistent basis.

 

Experience: Two years experience in water quality control plant operations. Specialized training may be substituted for 6 months experience.

Physical requirements: Moderate, and sometimes strenuous exertion required, including sustained walking, standing, bending, climbing, and lifting.

Education: Graduation from high school or equivalent.

License: Possession of a State Water Resources Control Board Grade II Operator's Certificate and possession of a valid Class C California Driver's License (including acceptable driving record).

Apply Immediately- Open until a Maximum number of 25 applications received

Written Exam: TBD

Oral Exams: TBA

Resumes are not accepted in lieu of completing a City application. Incomplete applications will not be accepted.

This full time position is in Civil Service.

DEFINITION

Under general supervision, operates and maintains equipment and facilities of the water quality control system, and performs other related work as required.

EXAMPLES OF DUTIES

Monitors the operation of the wastewater treatment plant; operates treatment facility equipment such as settling tanks, pumps, activated sludge process, digester, centrifuge chlorinators to control flow and processing of wastewater sludge and effluent; monitors gauges, dials, meters and controls panels, and other recording instruments, interpreting results to determine processing requirements, and records data; oils, greases and cleans equipment; services and maintains a variety of plant equipment; extracts samples and performs laboratory tests and analysis; inspects plant equipment and facilities to locate and report needed repairs; performs general plant maintenance work, such as sweeping, cleaning, sanding, and painting; performs general grounds maintenance work; maintains routine and daily records; may have to work under adverse conditions.

MINIMUM QUALIFICATIONS

 

Knowledge of: The operation and routine maintenance of mechanical equipment, including pumps and electric motors; control procedures for wastewater treatment processes; tools, equipment and methods used in the overhaul, repair, adjustment and modification of stationary power equipment, and of the pumping, piping, and electrical systems used in a water quality control plant; sewage treatment processes and the laboratory tests used to check the effectiveness of such processes.

Ability to: Operate equipment used in a water quality control plant; make standard laboratory tests of sewage, receiving waters and sludge and interpret such tests; read and interpret gauges and recording devices reflecting plant operations; adjust treatment processes as indicated by plant conditions; perform mechanical repairs, maintenance work, and modification to equipment used in a water quality control plant; use various mechanic's tools with skill and accuracy; adapt to day, swing or graveyard work shift; follow oral and written directions; perform heavy manual labor involving lifting, carrying, kneeling, crawling and climbing; work in adverse conditions which require exposure to noise, noxious smells, gases, contact with wastewater, and risk of bodily injury; interact positively and cooperate with co-workers, respond politely to customers, work as a team member, function under demanding time pressure, respond in a positive manner to supervision, and attend work and perform duties on a regular and consistent basis.

 

Experience: One year of experience in mechanical maintenance and/or water quality control plant operations.

Physical requirements: Moderate, and sometimes strenuous exertion required, including sustained walking, bending, climbing and lifting.

Education: Graduation from high school or equivalent.

License: Possession of a State Water Resources Control Board Grade I Operator's Certificate; possession of a valid Class C California Driver's License (including acceptable driving record).

San José Clean Energy, or SJCE, is San José's local, not-for-profit electricity supplier operated by the City of San José's Energy Department. Since 2019, our dedicated and motivated team has provided clean energy for residents and businesses at competitive rates, while also offering community programs, local benefits, and increased transparency and accessibility.

San José Clean Energy serves more than 350,000 customers and has a peak load of almost 1 GW. SJCE is responsible for purchasing over 4,500 GWh of electricity annually and has an annual operating budget of over $300 million. Serving our community with respect and integrity is at the core of what we do. Joining our team means that you will be making a big impact and in the forefront in the fight against climate change. SJCE plays an important role in meeting San José's ambitious goal to be carbon neutral by 2030 and in implementing Climate Smart San José, the City's climate action plan.

SJCE centers equity in its drive to provide clean, renewable energy at competitive rates and provide local benefits. Since inception, SJCE has sprinted ahead to now provide 60% renewable and 95% carbon-free energy in our base product and has contracted to add over 1GW of new solar, wind, and battery storage to the grid. SJCE's low carbon energy supply is foundational as we work to meet the electrification goals outlined in Climate Smart San José. For more information about San José Clean Energy, please visit: www.sanjosecleanenergy.org .

This department is seeking to fill one (1) full-time Power Resources Specialist I/II position to support the Power Resources Division.

The Power Resources Specialist I/II position reports to a Principal Power Resources Specialist in the Power Resources Division. This position is part of an exciting, fast-paced team responsible for procuring hundreds of megawatts of renewable energy projects.

The selected candidate will have the following duties and responsibilities:

• Supports the preparation, issuing, and evaluation of solicitations related to Energy, Resource Adequacy and Renewable Energy Credits.
• Assists with the evaluation of pre- and post-release solicitation materials for long-term energy projects such as stand-alone and collocated energy storage, wind, and solar resources.
• Assists in the management, analyzing, and enforcing of power contracts, including long-term energy contracts through development, construction, and operation.
• Assists in the management and resolution of matters related to resources performance within the California Independent System Operator's energy and capacity markets.
• Supports SJCE Scheduling Agent, particularly focusing on stand-alone and collocated storage and renewables, based on SJCE's internal strategies and policies.
• Conducts primary research related to SJCE obligations within the CAISO, CPUC, and other regulatory frameworks with particular focus on matters related to stand-alone and collocated storage, and renewable energy assets.
• Participates in completing analysis and prepare procurement plans, including managing consultants, and developing procurement strategies.
• Supports and undertakes projects related to power, procurement, and validation; assists in the approval of energy purchases or sales of surplus energy.
• Participates in joint procurement with other Community Choice Aggregators (CCAs) and CA Community Power.
• Develops and maintain relationships with power suppliers and consultants.
• Assures compliance with Federal, State, and local requirements.

The ideal candidate is a highly motivated individual with strong analytical, quantitative , and problem-solving skills. The candidate should have effective communication skills, show attention to detail, and be able to work independently. Candidates that are highly collaborative with colleagues and outside stakeholders are ideal.

 

Please visit this link to view the job posting:

https://www.governmentjobs.com/careers/marinwater/jobs/4516970/field-pipeline-locator-intern?pagetype=jobOpportunitiesJobs

Located in Middletown, CA!

 

The Mechanic Operator position consists of five levels of competency.  Individuals can either enter into the classification at the beginning level of the job or somewhere between the entry level and the top step depending on the qualifications brought with them.  It is the expectation of NCPA that all employees progress to the top level.  In order to progress to the top level an employee must complete all components in a competency level within the associated training matrix.  Employees who successfully complete a training level matrix and who received a rating of “meets requirements” or higher by their immediate supervisor will be promoted when qualified.  Upon completion/demonstration of competencies employees will be expected to perform work in all completed levels and other job-related duties as required. All employees have the right to challenge any component in the training matrix by proving proficiencies verbally and practically.

General Scope of the Job
Under general supervision of the Mechanical Maintenance Supervisor and at times under the general direction of the Mechanic Operator Lead Person; to maintain, repair, adjust, install, and test, powerplant steam field, water injection systems and equipment and maintain lease site grounds.  The measure of accuracy and reliability is the safe, effective and efficient performance of the Facilities.  This position is predominately mechanic based with operation support as outlined below.

 

Description of Duties and Responsibilities
Level III:
This level of the Mechanic Operator position requires the completion of all Level III training requirements. The employee must perform the duties as described below and as defined in lower levels while attaining Level IV skills and experience through academic and hands-on training. Level III knowledge and skills focus on journey level mechanical duties and responsibilities.
•    Inspects, tests, calibrates, installs, rebuilds, adjusts, repairs and aligns all mechanical equipment such as hydraulic control systems, turbines, generators, cooling tower, pumps, electric motors, valves, gear reducers, compressors, blowers heat exchangers, HVAC systems excluding refrigerant replacement, fire protection systems, diesel and gas engines, mufflers, separators, traps, rock catchers, tanks, pipeline and pipe supports.
•    Maintains facility structures. 
•    Performs basic inspections and repairs various rigging equipment, fixtures and cranes.
•    Assists the scaffolding qualified journeyman in maintaining, and repairing scaffolding. 
•    Inspects and maintains safety devices such as harnesses and rescue equipment.
•    Works with Safety Manager to maintain records of regulated equipment.
•    Keeps accurate records of equipment history, reports and work orders on computer for CMMS.  Works with CMMS personnel for accuracy and reliability.
•    Performs preventative maintenance and assessments on various plant equipment.
•    Writes Work/Operating Procedures within area of expertise.
•    Requisitions replacement parts and supplies to carry out assigned tasks.
•    Makes working drawings of components and changes made to Plant systems relative to area of expertise.
•    Installs, inspects, tests, repairs, rebuilds, and maintains equipment such as portable and fixed site pumps, valves, mufflers, separators, traps, rock catchers, turbines, generators, motors, gear reducers, compressors and hydraulic control systems, pipelines, tanks, pipeline supports, effluent piping components.
•    Maintains lease site grounds structures, culverts, roads, drains and ditches.
•    Examines and diagnoses malfunctions or defective equipment on pumps, motors, valves, separators, vents, air vacuum breakers and compressors; disassembles/reassembles, overhauls and adjusts defective equipment
•    Installs, fits and calibrates equipment replacement parts.  Observes equipment operation.  Adjusts equipment to operational specifications using specialized tools and precision measuring instruments.
•    Disassembles, removes, repairs, replaces, assembles and aligns pipes, pipeline components, and valves repairing or replacing broken and worn parts using various hand tools.
•    Observes and directs contractors while digging trenches, cleaning tanks and maintaining lease site grounds.
•    Under the direction and training of operations, assists with clearances on steam field and effluent pipeline equipment for maintenance purposes.
•    Will be trained to Rig and lift equipment to install, repair or replace equipment.
•    Instructs and trains workers in repair and maintenance procedures of steam field, power plant and effluent pipeline equipment.
•    Maintains inventory of tools and materials for the maintenance work at the steam field and effluent pipeline.
•    Maintains steam field equipment records on work completed on CMMS or equivalent maintenance program.
•    Assists other classifications when needed.
•    Performs other job-related duties as required.
•    Acquire OSHA certified training to meet business needs.
•    Trains and advises other workers in the maintenance and operation of steam field and effluent pipeline equipment.
•    Maintains and repairs Hydraulic Control Systems.

Level IV:
This level of the Mechanic Operator position requires the completion of all Level IV training requirements for operational duties and responsibilities.  The employee must perform the duties as described below and as defined in lower levels while attaining Level V skills and experience through academic and hands-on training.
•    Reviews, coordinates and reports work orders, work activities and equipment clearances with appropriate personnel.  
•    Checks equipment to be cleared in advance to guarantee its condition to others.  Informs Operator Technician Lead Person and Supervisors of the status of equipment and systems.  
•    Under direction of the Operator Technician Lead Person or a designee, operates various equipment and performs basic equipment clearances on low voltages (<600 volt) electrical breakers, steam line equipment and effluent equipment.  
•    Terminates and connects motor wiring to facilitate bearing repairs (less than 600 volts.).
•    Conducts online test of equipment before certifying its status and performance.

Machinist Duties and Responsibilities
•     Sets up and operates machine tools to repair or reproduce equipment parts and fittings working from blueprints or defective parts using precision tools and measuring instruments.
•    Fabricates special tools, rigging equipment and replacement parts to repair equipment.   
•    Fabricates, modifies, shapes and repairs equipment parts using a variety of metal working machines.
•    Chips, grinds, bores, and drills equipment parts.
•    Verifies conformance of finished work piece to specifications, using precision measuring instruments.
•    Calibrates, fits and assembles equipment parts according to drawings and specifications using machine tools, power tools, and measuring instruments.
•    Installs machined replacement parts; starts and observes equipment operation to detect malfunctions or out-of-tolerance performance, adjusts as necessary.
•    Maintains shop equipment and tools.
•    Maintains inventory of machining tools.

Representative Physical and Job Demands
•    Regularly talks and listens to others to exchange and obtain information to direct the operation and maintenance of Geothermal Facility steam field and effluent equipment.
•    Regularly reaches, grasps, pushes and pulls various wrenches, hand tools, and other objects using manual dexterity and eye hand coordination to operate and maintain equipment.
•    Regularly climb ladders and walks on platforms near high temperature surfaces; works on slippery or uneven surfaces in precarious places.
•    Frequently walks, reaches, kneels and crouches using feet, legs, hands and manual strength to access and operate plant equipment.
•    Occasionally lifts and moves pumps motors and pipe weighing up to 50 pounds.
•    Routinely works near heated surfaces; works on slippery or uneven surfaces in precarious places to adjust or operate equipment.
•    Occasionally exposed to high voltage and other electrical hazards while working on equipment.
•    Routinely works in outside weather conditions and is exposed to chemicals, wet and humid conditions, extreme cold and heat while inspecting and maintaining equipment.  The noise level is frequently very loud.
•    Routinely listens to operating sounds of equipment to diagnosis equipment malfunctions.
•    Frequently operates forklifts cranes, air compressors, sandblasters and power tools to maintain and repair equipment.
•    Frequently operates Agency vehicles going to and from job locations.

 

Job Expectations
Acquisition and Use of Technical Knowledge
•    Possesses or acquires as needed the ability to detect, diagnose disassemble and repair steam and water equipment with a fundamental knowledge of; turbine equipment, and auxiliary systems and their capabilities; operation processes, mechanical and electrical theory and background to operate equipment; measuring devices and hand tools for maintenance work; general contamination and control practices and procedures; basic math, geothermal powerplant rules and regulations; clearance procedures, physics including pump mechanics; basic principles of thermodynamics and fluid flow.  Given this basic knowledge, understands own role within the plant and how that role requires the use of knowledge applied to practical, day to day, operations and maintenance demands.  Hold self-accountable to acquire knowledge that may be needed when a job situation changes, new tasks are introduced to the job, or when improved performance requires acquiring extended or specialized information.
•    Possesses or acquires as needed an extensive knowledge of safety, fire, and security rules and procedures.  Given the emphasis of safety at the plant, uses knowledge to improve plant conditions and the organization’s safety record.
•    Acquires knowledge of operations and maintenance procedures on a continuing basis to stay current as a significant contributor to plant solutions, safety performance, and operations and maintenance improvements.
•    Confers with Operator Technician Lead Person or Operations Supervisor to resolve system problems and offers a variety of workable solutions to complex problems and report status of systems and equipment.  
•    Identifies problems or trends with systems and equipment early to prevent operator or electrical errors. 
•    Passes knowledge on to other employees as a way to contribute to the performance of others, or get a job done.
•    Assesses own limitations with the fundamental knowledge needed to perform in the job.

Application of Technical and General Job Skills
Technical and job skills are indicated by demonstrating an ability to:
•    Efficiently and effectively operate, control, and maintain equipment, and be accountable for aspects of the job at the Geothermal Facility. 
•    Implement or use existing methods to control the waste of time, money and material resources, such as:
o    Acting to improve work procedures 
o    Conserving resources 
o    Expediting a job
o    Completing a work assignment efficiently
o    Completing long term work in an orderly fashion
•    Work with management to identify and learn from mistakes made and apply what is learned to future situations or plant conditions.
•    Establish and maintain effective work relationships with those contacted in the performance of required duties.
•    Review own action to determine the cause of poor working relationships so those relationships can be improved
•    May be required to work extended hours and on normal days off.
•    Operate Agency vehicles and equipment safely.

 

Training and Experience Requirements
Level III: Completion of the NCPA Level III training program or three years of equivalent journey-level mechanical experience.
Level IV: Completion of the NCPA Level IV training program or three years of equivalent journey-level mechanical experience and operations experience.

 

Driver’s License Requirement
Possession of an unrestricted Class C California operator’s license issued by the State of California, Department of Motor Vehicles.  Possession and maintenance of a good driving record as demonstrated by the absence of multiple or serious traffic violations or accidents within the last three (3) years.

 

Desired Qualifications 
•    Possession, or ability to obtain with training, a Class A California operator’s license issued by the State of California Department of motor Vehicles.
•    Ability to set up and operates machine tools to repair or reproduce equipment parts and fittings working from blueprints or defective parts using precision tools and measuring instruments.
•    Ability to Fabricate special tools, rigging equipment and replacement parts to repair equipment.   
•    Ability to Fabricate, modifies, shapes and repairs equipment parts using a variety of metal working machines.
•    Chips, grinds, bores, and drills equipment parts.
•    Verifies conformance of finished work piece to specifications, using precision measuring instruments.
•    Calibrates, fits and assembles equipment parts according to drawings and specifications using machine tools, power tools, and measuring instruments.
•    Installs machined replacement parts; starts and observes equipment operation to detect malfunctions or out-of-tolerance performance, adjusts as necessary.

 

 

EOE

The Application Programmer performs or assists in the design, documentation, coding, testing, and implementation of new application programs or enhancements to existing application programs consistent with the Software Development Life Cycle (SDLC) best practices and applicable computer programming standards and frameworks. The position is primarily responsible for the suite of Bid-to-Bill applications as well as other business applications in use by the Agency. The position will work with other developer staff and supervisor during probationary status to learn and develop proficiency in the use of the Agency's software development frameworks, processes, and documentation design standards.

 

ESSENTIAL DUTIES AND RESPONSIBILITIES
This position requires that the incumbent reports for work on time and maintains satisfactory attendance in accordance with Agency policy; Ensures work responsibilities are covered when absent; Arrives to meetings and appointments on time; Performs special assignments as assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Level I: 
This classification is an entry-level position that is not expected to perform with the same level of independence of direction and judgment as higher levels. The level I works closely with other senior-level CTAs and is often given direction to complete tasks, install and troubleshoot hardware and software, perform system upgrades, evaluate and apply patches to systems, work closely with customers, and provide application support through help desk requests, and creates and maintains documentation.

Level II: 
This classification requires having all Level I duties and responsibilities with a minimum of two years of experience in software application development. Level II receives occasional direction and guidance from other senior-level CTAs; otherwise, uses developed experience and professional judgment to successfully complete projects in accordance with defined requirements and established timelines.

Responsibilities:
•    Within a specific hardware and operating system environment, work to define and design the operating features of new programs or enhancements
•    Produce appropriate conceptual-level application documentation for review and approval by the supervisor
•    Produce appropriate programming documentation for the review of the Supervisor, with sufficient detail on which to base programming activities
•    Develop computer programs in accordance with design documentation, closely following coding standards and conventions used within NCPA
•    Test applications using prescribed test methodology and tools
•    Develop an implementation plan, prepare production rollout for approval by the supervisor, and coordinate with the Ops team to execute the rollout
•    Maintain and enhance software applications
•    Conduct independent communications with user departments in a cooperative and professional manner
•    Provide emergency system support outside normal working hours as needed, on a rotational basis with other department employees
•    Travel to NCPA remote field sites to provide support to remote users as needed 
•    Assist in the evaluation of proposed new or modified computer system hardware and software

 

 

MINIMUM QUALIFICATIONS

Level I:
Education and/or Experience      
Bachelor's degree in Computer Science, Management Information Systems, Computer Engineering, or related field from an accredited four-year college or university and at least six months of related programming experience and training.

Level II:
Education and/or Experience      
Bachelor’s degree in Computer Science, Management Information Systems, Computer Engineering or related field from an accredited four-year college or university and at least two years of related programming experience and training. A minimum of two years in design and programming experience including some experience programming interactive programs. Experience must include exposure to systems analysis techniques.

 

KNOWLEDGE AND ABILITIES 
Knowledge:
Knowledge of VB.Net and/or C# as core programming language is essential; Integrated development environment (IDE) such as Microsoft Visual Studio; Source control management tools such as Team Foundation Server (TFS) and Git; JavaScript, HTML5, and Cascading Style Sheets (CSS) for developing web pages is highly desired; Oracle PL/SQL, SQL-Server T-SQL or similar SQL experience and understanding of relational database principles. Knowledge of software testing methodologies and tools, computer equipment and capabilities, data communications and local area networking, and client-server software is essential; Principles and programming techniques used to implement online interactive applications, technical report writing, systems analysis techniques, database management concepts, and management information system concepts; DevOps and related best practices; and knowledge of the Component-based Scalable Logical Architecture (CSLA) is an advantage.

Abilities:
Ability to write moderately complex programs and develop detailed program specifications; Demonstrate an understanding of MVC (Model-View-Controller; Stay up to date with related software development technologies through training, product research, and participating in conferences and user groups. Ability to work effectively with a broad, diverse cross-section of peers and various individual personalities; listen effectively, communicate with, and maintain a professional working relationship with co-workers; communicate clearly, efficiently, and professionally both over the phone and in person; Maintain strong organizational skills; and the ability to complete quality and timely work with minimal supervision.

 

SPECIAL REQUIREMENTS

Valid California Driver's License and insurance. 

This job has no supervisory responsibilities.

 

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this Job, the employee is regularly required to sit and view and operate a computer, use hands to finger, handle, or feel, reach with hands and arms, and talk or hear. Requires manual finger dexterity and eye-hand coordination to operate and adjust office equipment such as computers. The employee is occasionally required to stand and walk. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, color vision, and the ability to adjust focus.

The noise level in the work environment is usually quiet.

All employees are responsible for contributing to an inclusive, safe, and secure work environment that values diverse cultures, perspectives, and experiences and is free from discrimination.

Applications will be reviewed at the following cutoffs: 

June 3, 2024

June 24, 2024

THE POSITION

The City of Rocklin is looking for two Maintenance Workers to assist in the Parks Division of the Parks and Recreation Department. The Maintenance Worker is a temporary position and incumbents work on an as-needed basis, not to exceed 28 hours per week and up to 999 hours per fiscal year. Temporary employment does not provide any guarantee of continued employment and the City of Rocklin may end the assignment at any time. Temporary employees are not eligible for any other benefits except where required by law, and there is no guarantee of future permanent employment.

An example of duties are:

• Performs flood control measures by clearing creeks of obstructions, keeping drains clean and clear, and preparing sandbags in case of emergency.
• Performs crack sealing of asphalt, and backfilling trenches and excavations on City streets; performs repair, maintenance, and construction of sidewalks, curbs, and gutters.
• Removes concrete, builds forms, pours concrete, and performs other concrete work around City buildings as required.
• Empties trash cans, picks up and removes debris, litter, and trash from parks, athletic fields, trails, and landscaped areas throughout the City; removes graffiti and other unwanted markings from City-owned property.
• Plants, mows, prunes, and maintains turf, trees, shrubs, and plants; clears sites of weeds.
• Performs construction and repair of landscapes and other park facilities such as installing and maintaining signs, installing park structures, and installing and maintaining fences.
• Paints or stains and pressure washes and cleans park amenities and fencing.
• May apply pesticide, herbicide and other pest management treatments to vegetation and landscaped areas.
• Makes minor adjustments on service equipment; maintains tools and equipment in working order.
• Operates trucks, trailers, and other automotive equipment as required.
• Maintains logs of daily activities.
• Performs related duties as assigned.

MINIMUM REQUIREMENTS

Equivalent to graduation from high school
AND
Three (3) months of experience as a laborer in construction, maintenance, or landscaping work 

Licenses and Certifications

• Possession of, or ability to obtain and maintain, a valid California Class C Driver License and a satisfactory driving record is required. Individuals who do not meet this requirement due to a disability will be reviewed on a case-by-case basis.

San Mateo Medical Center is seeking an experienced Surgery Scheduling Specialist for a Full-Time, Extra-help position for the Surgery Department. The Surgery Scheduling Specialist provides technical, complex and specialized administrative support to surgeons and patients scheduled for surgery, which includes interaction with operating room staff and patients; handles multiple competing priorities; interacts with diverse customer groups; handles multiple patient-related tasks such as tracking patient financials to ensure information is correctly entered; and moves patients from the clinic to the operating room, including all pre-operative processes necessary for the patients prior to surgery, pre-op process sheets and clinic schedules, data entry of items into the operative database, financial reconciliation, and post-op order sets, and may have some responsibilities for ordering supplies or equipment.
 
The ideal candidate for this position will possess excellent communications skills, including the ability to communicate complex medical terminology to a variety of people with varying levels of medical knowledge. In addition, they would possess skills in conflict resolution, and problem solving. The ideal candidate will have the ability to work with challenging patients, and patients who may have a language or communication barrier. This position will require attention to detail, and therefore the ideal candidate will possess strong organizational skills and the ability to multi-task.
 
NOTE: The ability to speak, read and write in fluent English and Spanish is preferred for this position.
 
 Duties for this position may include, but are not limited to, the following:

• Tracking patient financials to be sure they are correctly entered.
• Scheduling patients in the procedure clinic.  
• Updating the pre-op process sheet and clinic schedule in the computer.
• Entering data into the operative database.
• Interfacing between the Operating Room and Surgeon.
• Ability to schedule patients using the OR manager program.

NOTE: This Job Announcement was edited on May 16, 2023 regarding the definition of the extra help assignment. This is an extra-help, at-will assignment, paid on an hourly basis. Extra-help hours are dependent on the business needs of the department and therefore work hours may vary from week to week. Extra help employees shall not exceed 1,040 hours of work per fiscal year. Some extra help positions are eligible for benefits under the Affordable Care Act. Extra help employees are not guaranteed permanent status at the end of the assignment.

 

Qualifications

Knowledge of:

• Medical terminology as related to patient services support work.
• Policies and procedures related to patient services office support and hospital or clinic business office activities.
• Office administrative practices and procedures, including filing and the operation of standard office equipment.
• Basic business data processing principles and the use of word processing or computing equipment.
• Proper form for typed materials.
• Business arithmetic, including percentages and decimals.
• Correct English usage, including spelling, grammar and punctuation.
• Record keeping principles and procedures.

Skill/Ability to:

• Perform technical, specialized, complex or difficult patient services office support work.
• Organize, prioritize and coordinate work activities.
• Read, interpret and apply rules, policies and procedures.
• Organize, research and maintain patient and general office files.
• Establish and maintain effective working relationships with those contacted in the course of the work.
• Compose routine correspondence from brief instructions.
• Make arithmetic calculations with speed and accuracy.
• Use initiative and sound independent judgment within established guidelines.
• Operate standard office equipment, including a word processor, personal or on-line computer, and centralized telephone equipment.

Note: Specific positions may require the ability to type at a rate of 40 net words per minute from printed copy.

Education and Experience:
Any combination of education and experience that would likely provide the required knowledge, skills and abilities is qualifying. A typical way to qualify is:

One year of journey level office support experience in a patient services setting. 

 

Application/Examination

If you are interested in being considered for this extra-help position, the following materials must be electronically submitted in a Word or PDF format.

• Cover letter with responses to Supplemental Questions (maximum of 2 pages) 
• Resume

Please include the words "Surgery Scheduling Specialist - Spanish-Speaking Preferred - Extra-Help (Open)" in the subject line of email submission.  Please submit the required materials electronically via email to:
 

 Vicky Magana, Clinical Services Manager I - Nursing

vdunn@smcgov.org

 

Supplemental Questions:    

1. Describe the training, education, and experience that have prepared you for the position of Surgery Scheduling Specialist. Include your experience working with specialty clinics, surgeons and operating rooms. 

2. Describe your experience working with a diverse patient population and explaining medical/surgical procedures to people with varying degrees of familiarity with the medical field. Describe the challenges and the methods you used to be successful. Be specific.

Application materials will be reviewed as they are received, and well-qualified candidates will be contacted for an interview.
 

Apply immediately. This recruitment is open on a continuous basis and selections may be made at any time within the process.

NOTE: Application materials are only accepted via e-mail. Materials sent via regular mail and/or fax will not be accepted. Submittals that do not include all required elements (cover letter with responses to supplemental questions and a resume) will not be considered. 

San Mateo Medical Center is seeking well-qualified candidates for the position of Occupational Therapist II.  
Currently, there is one full-time, limited-term vacancy and two Extra-Help, part-time, vacancies. These positions will plan and provide occupational therapy services for acutely ill or rehabilitative patients in an outpatient and/or inpatient setting.
Occupational Therapist II is the experienced journey level class in this series. Incumbents in this class perform the full range of general therapy treatments with a greater degree of independence and proficiency, additionally applying more specialized and advanced therapy treatments. Some individuals may also assist in providing technical advice and training to less experienced staff.
The ideal candidate has graduated from an accredited occupational therapy curriculum and is licensed as an Occupational Therapist by the California Board of Occupational Therapy and registered with the National Board for Certification in Occupational Therapy. They will also possess a Certificate of completion for a course in Basic Life Support as approved by the American Red Cross or American Heart Association. Additionally, the incumbent will have experience in working with adults, skilled nursing, and acute care.  Fluency in Spanish is preferred, but not required. Ability to work weekends and/or holiday coverage when necessary is strongly preferred.
About Us
SMMC inpatient and outpatient rehabilitation department has a talented team of 35 physical, occupational and speech therapists. We take pride in excelling within San Mateo County's public hospital and clinics, taking care of the most diverse patient populations. We treat a multitude of conditions, including neurologic and orthopedic injuries, as well as post-operative surgical conditions, where our outcomes exceed targets. Further, we foster educational and improvement opportunities, which provide best-practice care and evidence-based skills. Join our team! We are looking for a new team member who enjoys working with a large multidisciplinary team, has a growth mindset, advocates for resources, and shares in our team's celebrations and accomplishments. Our colleagues have shared that San Mateo County's commitment to work-life balance is one of the best in the industry. Come share your talents on our engaged and dynamic therapy team!  

Examples Of Duties

Duties may include, but are not limited to, the following:

• Under medical direction, plan and perform occupational therapy for a variety of patients.
• Collaborate with a multi-disciplinary team to provide comprehensive treatment to patients.
• Provide therapeutic activities to promote independence in daily living activities.
• Plan, organize and participate in occupational therapy activities.
• Design and fabricate splints.
• Instruct patients in the use of therapeutic tools and equipment.
• Provide ongoing assessment and documentation of the patient's response to treatment in accordance with hospital standards.
• Participate in discharge planning and refer parents to community services.
• Determine need for department and patient-related supplies and equipment.
• Maintain cleanliness and organization of treatment areas.
• May participate as clinical preceptor in a university affiliated occupational therapy student program.
• Perform related duties as assigned.

Qualifications

Licensure/Certification:

• Eligibility for or registration as an Occupational Therapist by the National Board for Certification in Occupational Therapy. Failure to obtain this licensure within twelve months of employment may result in termination.
• Possession of a Certificate of completion for a course in Basic Life Support as approved by the American Red Cross or American Heart Association; or must be obtained within six months of appointment.

Education and Experience:
Any combination of education and experience that would likely provide the required knowledge, skills and abilities is qualifying. A typical way to qualify is:

Occupational Therapist II: One year of supervised experience in occupational therapy.

Knowledge of:

• Principles and methods of occupational therapy, as applicable to all types of cases found in a general hospital providing acute care or in a rehabilitative center.
• Physical and psychological problems of physically disabled, aged, gero-psychiatric and chronically ill patients.
• Principles of splint design and fabrication.
• Use and care of therapeutic tools and equipment commonly used in occupational therapy.
• Professional ethics and the fundamental laws of practice for occupational therapy.

Skill/Ability to:

• Administer and document occupational therapy treatments.
• Assess patient needs, analyze situations accurately and implement an effective plan of action.
• Adapt equipment to patient needs.
• Integrate occupational therapy services with other medical and institutional programs.
• Develop new programs in response to patient/department need.
• Explain and teach occupational therapy activities to patients, health care professionals and other interested persons.
• Exercise tact and good judgment in dealing with patients, staff and the public.
• Prepare reports and keep records of case histories.
• Communicate effectively, both verbally and in writing.
• Act as a consultant/trainer for education and other staff.
• Provide suitable transportation between work sites.
• Lift or assist with lifting patients and equipment.

Application/Examination

If you are interested in being considered for these extra-help or limited term positions, the following materials must be electronically submitted in a Word or PDF format.

• Cover letter
• Resumé
• Supplemental Questions

Supplemental Questions

1) Eligibility for or registration as an Occupational Therapist by the National Board for Certification in Occupational Therapy. Failure to obtain this licensure within twelve months of employment may result in termination. Do you possess this qualification or will be able to obtain this licensure within twelve months of employment?

2) Possession of a Certificate of completion for a course in Basic Life Support as approved by the American Red Cross or American Heart Association; or must be obtained within six months of appointment. Do you possess this qualification or will be able to obtain this certification within six months of appointment? 

3)Would you like to be considered for the Extra-Help vacancy or the Limited-Term vacancy?

Please include the words "Occupational Therapist II - Extra Help / Limited- Term " in the subject line of the email submission. Please submit the required materials electronically via email to:

Heather Rudolph, Clinical Services Manager - Rehabilitation 

hrudolph@smcgov.org

Application materials will be reviewed as they are received, and well-qualified candidates will be contacted for an interview.
Apply immediately. Resumés will be accepted until position is filled. This posting is open on a continuous basis and selection may be made at any time within the process.