Search Jobs

The City of Livermore is currently accepting applications for the position of Water Resources Mechanic I/II.  There are 2 vacancies can be filled at the I or II level. Apply online at www.LivermoreCA.gov!

WR MECHANIC I - $6,757.36 - $8,199.65 MONTHLY
WR MECHANIC II - $7,621.28 - $9,249.76 MONTHLY

Water Resources Mechanics perform a wide range of tasks involving mechanical maintenance and repairs of pumps, plumbing systems, electric motors, compressors, piping, boilers, underground infrastructure, facilities and buildings, carpentry, HVAC systems, mechanical drives, gear boxes, blowers, collectors, belt filter presses, and chemical feed systems. The work is done at the Water Reclamation Plant, located at 101 West Jack London Boulevard in Livermore.

A Water Resources Mechanic I performs a range of tasks requiring journey level mechanical ability and aptitude. Work assignments are performed according to established rules and procedures. Independent judgment is required and is supported at regular intervals by supervisory review and direction. A Water Resources Mechanic II is distinguished from the WR Mechanic I by the possession of advanced journey level mechanical ability and aptitude and is responsible for solving more difficult technical problems.

Please visit this link to view the job posting:

https://www.governmentjobs.com/careers/marinwater/jobs/4516970/field-pipeline-locator-intern?pagetype=jobOpportunitiesJobs

Located in Middletown, CA!

The Mechanic Operator position consists of five levels of competency.  Individuals can either enter into the classification at the beginning level of the job or somewhere between the entry level and the top step depending on the qualifications brought with them.  It is the expectation of NCPA that all employees progress to the top level.  In order to progress to the top level an employee must complete all components in a competency level within the associated training matrix.  Employees who successfully complete a training level matrix and who received a rating of “meets requirements” or higher by their immediate supervisor will be promoted when qualified.  Upon completion/demonstration of competencies employees will be expected to perform work in all completed levels and other job-related duties as required. All employees have the right to challenge any component in the training matrix by proving proficiencies verbally and practically.

General Scope of the Job
Under general supervision of the Mechanical Maintenance Supervisor and at times under the general direction of the Mechanic Operator Lead Person; to maintain, repair, adjust, install, and test, powerplant steam field, water injection systems and equipment and maintain lease site grounds.  The measure of accuracy and reliability is the safe, effective and efficient performance of the Facilities.  This position is predominately mechanic based with operation support as outlined below.

Description of Duties and Responsibilities
Level III:
This level of the Mechanic Operator position requires the completion of all Level III training requirements. The employee must perform the duties as described below and as defined in lower levels while attaining Level IV skills and experience through academic and hands-on training. Level III knowledge and skills focus on journey level mechanical duties and responsibilities.
•    Inspects, tests, calibrates, installs, rebuilds, adjusts, repairs and aligns all mechanical equipment such as hydraulic control systems, turbines, generators, cooling tower, pumps, electric motors, valves, gear reducers, compressors, blowers heat exchangers, HVAC systems excluding refrigerant replacement, fire protection systems, diesel and gas engines, mufflers, separators, traps, rock catchers, tanks, pipeline and pipe supports.
•    Maintains facility structures. 
•    Performs basic inspections and repairs various rigging equipment, fixtures and cranes.
•    Assists the scaffolding qualified journeyman in maintaining, and repairing scaffolding. 
•    Inspects and maintains safety devices such as harnesses and rescue equipment.
•    Works with Safety Manager to maintain records of regulated equipment.
•    Keeps accurate records of equipment history, reports and work orders on computer for CMMS.  Works with CMMS personnel for accuracy and reliability.
•    Performs preventative maintenance and assessments on various plant equipment.
•    Writes Work/Operating Procedures within area of expertise.
•    Requisitions replacement parts and supplies to carry out assigned tasks.
•    Makes working drawings of components and changes made to Plant systems relative to area of expertise.
•    Installs, inspects, tests, repairs, rebuilds, and maintains equipment such as portable and fixed site pumps, valves, mufflers, separators, traps, rock catchers, turbines, generators, motors, gear reducers, compressors and hydraulic control systems, pipelines, tanks, pipeline supports, effluent piping components.
•    Maintains lease site grounds structures, culverts, roads, drains and ditches.
•    Examines and diagnoses malfunctions or defective equipment on pumps, motors, valves, separators, vents, air vacuum breakers and compressors; disassembles/reassembles, overhauls and adjusts defective equipment
•    Installs, fits and calibrates equipment replacement parts.  Observes equipment operation.  Adjusts equipment to operational specifications using specialized tools and precision measuring instruments.
•    Disassembles, removes, repairs, replaces, assembles and aligns pipes, pipeline components, and valves repairing or replacing broken and worn parts using various hand tools.
•    Observes and directs contractors while digging trenches, cleaning tanks and maintaining lease site grounds.
•    Under the direction and training of operations, assists with clearances on steam field and effluent pipeline equipment for maintenance purposes.
•    Will be trained to Rig and lift equipment to install, repair or replace equipment.
•    Instructs and trains workers in repair and maintenance procedures of steam field, power plant and effluent pipeline equipment.
•    Maintains inventory of tools and materials for the maintenance work at the steam field and effluent pipeline.
•    Maintains steam field equipment records on work completed on CMMS or equivalent maintenance program.
•    Assists other classifications when needed.
•    Performs other job-related duties as required.
•    Acquire OSHA certified training to meet business needs.
•    Trains and advises other workers in the maintenance and operation of steam field and effluent pipeline equipment.
•    Maintains and repairs Hydraulic Control Systems.

Level IV:
This level of the Mechanic Operator position requires the completion of all Level IV training requirements for operational duties and responsibilities.  The employee must perform the duties as described below and as defined in lower levels while attaining Level V skills and experience through academic and hands-on training.
•    Reviews, coordinates and reports work orders, work activities and equipment clearances with appropriate personnel.  
•    Checks equipment to be cleared in advance to guarantee its condition to others.  Informs Operator Technician Lead Person and Supervisors of the status of equipment and systems.  
•    Under direction of the Operator Technician Lead Person or a designee, operates various equipment and performs basic equipment clearances on low voltages (<600 volt) electrical breakers, steam line equipment and effluent equipment.  
•    Terminates and connects motor wiring to facilitate bearing repairs (less than 600 volts.).
•    Conducts online test of equipment before certifying its status and performance.

Machinist Duties and Responsibilities
•     Sets up and operates machine tools to repair or reproduce equipment parts and fittings working from blueprints or defective parts using precision tools and measuring instruments.
•    Fabricates special tools, rigging equipment and replacement parts to repair equipment.   
•    Fabricates, modifies, shapes and repairs equipment parts using a variety of metal working machines.
•    Chips, grinds, bores, and drills equipment parts.
•    Verifies conformance of finished work piece to specifications, using precision measuring instruments.
•    Calibrates, fits and assembles equipment parts according to drawings and specifications using machine tools, power tools, and measuring instruments.
•    Installs machined replacement parts; starts and observes equipment operation to detect malfunctions or out-of-tolerance performance, adjusts as necessary.
•    Maintains shop equipment and tools.
•    Maintains inventory of machining tools.

Representative Physical and Job Demands
•    Regularly talks and listens to others to exchange and obtain information to direct the operation and maintenance of Geothermal Facility steam field and effluent equipment.
•    Regularly reaches, grasps, pushes and pulls various wrenches, hand tools, and other objects using manual dexterity and eye hand coordination to operate and maintain equipment.
•    Regularly climb ladders and walks on platforms near high temperature surfaces; works on slippery or uneven surfaces in precarious places.
•    Frequently walks, reaches, kneels and crouches using feet, legs, hands and manual strength to access and operate plant equipment.
•    Occasionally lifts and moves pumps motors and pipe weighing up to 50 pounds.
•    Routinely works near heated surfaces; works on slippery or uneven surfaces in precarious places to adjust or operate equipment.
•    Occasionally exposed to high voltage and other electrical hazards while working on equipment.
•    Routinely works in outside weather conditions and is exposed to chemicals, wet and humid conditions, extreme cold and heat while inspecting and maintaining equipment.  The noise level is frequently very loud.
•    Routinely listens to operating sounds of equipment to diagnosis equipment malfunctions.
•    Frequently operates forklifts cranes, air compressors, sandblasters and power tools to maintain and repair equipment.
•    Frequently operates Agency vehicles going to and from job locations.

Job Expectations
Acquisition and Use of Technical Knowledge
•    Possesses or acquires as needed the ability to detect, diagnose disassemble and repair steam and water equipment with a fundamental knowledge of; turbine equipment, and auxiliary systems and their capabilities; operation processes, mechanical and electrical theory and background to operate equipment; measuring devices and hand tools for maintenance work; general contamination and control practices and procedures; basic math, geothermal powerplant rules and regulations; clearance procedures, physics including pump mechanics; basic principles of thermodynamics and fluid flow.  Given this basic knowledge, understands own role within the plant and how that role requires the use of knowledge applied to practical, day to day, operations and maintenance demands.  Hold self-accountable to acquire knowledge that may be needed when a job situation changes, new tasks are introduced to the job, or when improved performance requires acquiring extended or specialized information.
•    Possesses or acquires as needed an extensive knowledge of safety, fire, and security rules and procedures.  Given the emphasis of safety at the plant, uses knowledge to improve plant conditions and the organization’s safety record.
•    Acquires knowledge of operations and maintenance procedures on a continuing basis to stay current as a significant contributor to plant solutions, safety performance, and operations and maintenance improvements.
•    Confers with Operator Technician Lead Person or Operations Supervisor to resolve system problems and offers a variety of workable solutions to complex problems and report status of systems and equipment.  
•    Identifies problems or trends with systems and equipment early to prevent operator or electrical errors. 
•    Passes knowledge on to other employees as a way to contribute to the performance of others, or get a job done.
•    Assesses own limitations with the fundamental knowledge needed to perform in the job.

Application of Technical and General Job Skills
Technical and job skills are indicated by demonstrating an ability to:
•    Efficiently and effectively operate, control, and maintain equipment, and be accountable for aspects of the job at the Geothermal Facility. 
•    Implement or use existing methods to control the waste of time, money and material resources, such as:
o    Acting to improve work procedures 
o    Conserving resources 
o    Expediting a job
o    Completing a work assignment efficiently
o    Completing long term work in an orderly fashion
•    Work with management to identify and learn from mistakes made and apply what is learned to future situations or plant conditions.
•    Establish and maintain effective work relationships with those contacted in the performance of required duties.
•    Review own action to determine the cause of poor working relationships so those relationships can be improved
•    May be required to work extended hours and on normal days off.
•    Operate Agency vehicles and equipment safely.

Training and Experience Requirements
Level III: Completion of the NCPA Level III training program or three years of equivalent journey-level mechanical experience.
Level IV: Completion of the NCPA Level IV training program or three years of equivalent journey-level mechanical experience and operations experience.

Driver’s License Requirement
Possession of an unrestricted Class C California operator’s license issued by the State of California, Department of Motor Vehicles.  Possession and maintenance of a good driving record as demonstrated by the absence of multiple or serious traffic violations or accidents within the last three (3) years.

Desired Qualifications 
•    Possession, or ability to obtain with training, a Class A California operator’s license issued by the State of California Department of motor Vehicles.
•    Ability to set up and operates machine tools to repair or reproduce equipment parts and fittings working from blueprints or defective parts using precision tools and measuring instruments.
•    Ability to Fabricate special tools, rigging equipment and replacement parts to repair equipment.   
•    Ability to Fabricate, modifies, shapes and repairs equipment parts using a variety of metal working machines.
•    Chips, grinds, bores, and drills equipment parts.
•    Verifies conformance of finished work piece to specifications, using precision measuring instruments.
•    Calibrates, fits and assembles equipment parts according to drawings and specifications using machine tools, power tools, and measuring instruments.
•    Installs machined replacement parts; starts and observes equipment operation to detect malfunctions or out-of-tolerance performance, adjusts as necessary.

EOE

We have exciting internship opportunities available at the City of Millbrae’s Public Works Department.  The Public Works Department is looking to hire two (2) interns for the Engineering Division. This is an open-ended internship without a specific term. The working schedule is to be determined based on business needs and candidate availability, and no more than 1,000 hours in a fiscal year.

The Engineering Division interns would be working on various infrastructure projects, such as streets, sewer, bridge/structural, permitting, and document management.  Interns will assist the engineers by writing reports or conducting field visits to solve construction issues.  Interns would report to the Senior Engineers located at the Corporation Yard at 400 East Millbrae Avenue.

We encourage anyone interested in municipal engineering to apply.  Jump start your career early through participating in these valuable, paid internships.  Join the Millbrae team to learn and experience City government! 

SUMMARY:  Under close supervision, performs a variety of entry-level administrative tasks and special projects; assists in the coordination of administrative activities and analysis of department systems and procedures; and performs related work, as required.

ESSENTIAL FUNCTIONS: -- Essential functions, as defined under the Americans with Disabilities Act, may include any of the following representative duties, knowledge, and skills.  This is not a comprehensive listing of all functions and duties performed by incumbents of this class; employees may be assigned duties which are not listed below; reasonable accommodations will be made as required.  The job description does not constitute an employment agreement and is subject to change at any time by the employer.  Essential duties and responsibilities may include, but are not limited to the following:

• Research, compile, tabulate, and analyze data for a variety of administrative and departmental matters.
• Assist department personnel in assigned administrative, planning, organizational, technical, and professional tasks.
• Provide suggestions or recommendations regarding department specific projects.
• Prepare and present reports; draft policies and procedures; respond to requests for information. 
• Perform specific department related duties and tasks as required.

MINIMUM QUALIFICATIONS:

Education, Training and Experience Guidelines: 

Proof of enrollment in a college or university OR recent graduates with paid or volunteer work experience, which demonstrates the ability to successfully perform the duties of the position.  Major course of study may be in one of the following areas: Business Administration, Public Administration, Accounting, Architecture, Computer Science, Engineering, Urban Planning, Human Resources, Communications, Recreation Administration, OR a related field of study. Education and experience will be evaluated based on the actual position.

Knowledge of: 

• Principles and practices of public administration and organization applicable to a local agency.
• Administrative techniques; statistical practices and methods of graphic presentation.
• Modern office methods, practices, procedures, and equipment, including personal computers and modern software and spreadsheet programs.
• Elements of business writing and proper use of English, vocabulary, spelling, punctuation, and grammar.  

Skill in:  

• Providing efficient customer service and communicating clearly and objectively both verbally and in writing.
• Organizing with the ability to prioritize work and exercise independent judgment, wisdom, common sense, and initiative.
• Thoroughly carrying out oral and written instructions.
• Gathering and analyzing data; preparing narrative reports and performing numerical analysis.
• Evaluating and recommending changes to policies, programs, and practices.
• Conducting research; proficiently utilizing a personal computer in completing special projects. 
• Following written and oral instructions with minimum supervision; effectively presenting information in writing and orally to the general public, outside agencies, and fellow employees. 
• Speaking effectively in a public forum on related topics and issues. 
• Prioritizing and scheduling workload to ensure completion when faced with deadlines or emergencies.
• Establishing and maintaining effective working relationships with those contacted in the course of work, including City and other government officials, community groups, and the general public; and apply safe work practices.

LICENSE AND CERTIFICATION REQUIREMENTS:

Possession of a valid Class "C" California driver's license. 

PHYSICAL DEMANDS AND WORKING ENVIRONMENT:

Work is performed in an office environment in close proximity to other workers.  Incumbent shall be exposed to those conditions normally encountered in a business office environment.  Physical demands require frequent standing, reaching, leaning, twisting, grasping, lifting and sitting for prolonged periods of time.  Must carry moderately heavy boxes up to 50 pounds and/or utilize a dolly.  Incumbent must be able to drive safely to various City sites.  Incumbent must be able to see and hear in the normal range, with or without correction.  Incumbent must have the stamina to work long hours and overtime, if assigned, and be willing to work an irregular schedule, which might include evenings, weekends, holidays, and varying hours.

The City of Lincoln is accepting applications for the position of Refuse Truck Driver II in the Solid Waste division of the Public Works department. Under general supervision, this position performs a variety of tasks in the collection of residential, commercial and industrial solid waste refuse; drive and operate refuse collection vehicles; organize, assign and review the work of others and perform other related duties as required.  

DISTINGUISHING CHARACTERISTICS

Refuse Truck Driver II

This is a journey level class and is distinguished from the Maintenance Worker I classification by the ability to perform the full range of duties assigned with only occasional instruction or assistance as unusual or unique situations arise. This class is distinguished from the Senior Refuse Truck Diver in that the latter provides technical and functional supervision over assigned staff or division programs and responsibilities.

SUPERVISION RECEIVED/EXERCISED

Receives general supervision from a Public Works Supervisor. May receive technical and functional supervision from a Senior Refuse Truck Driver.

ESSENTIAL FUNCTIONS

Include but are not limited to the following:

• Drives and operates a variety of collection vehicles and equipment including one or two-person-staffed refuse collection truck, front, rear and side loaders in the collection and transportation of residential and commercial refuse; responds to afterhours call-outs if assigned.
• Maintains assigned truck by regular cleaning and washing, including inspecting for mechanical or other operating problems; reports mechanical or related problems for maintenance; may perform minor maintenance as appropriate.
• Operates hydraulic/mechanical controls to load, compress, and dump refuse; collects and disposes of debris on assigned route; transports refuse to/unload at appropriate landfill sites and/or sewage treatment plant.
• Assists with battery sorting, electronic waste collection, bin repair or delivery, cardboard removal, illegal dumping cleanup, and any other related solid waste program or assignment.
• Completes and posts notification tags on containers, bins and dumpsters for unacceptable contents for refuse collection.
• Prepares, maintains and submits records, reports and forms including time records, equipment and maintenance records, and route maps and logs.
• Responds to questions and concerns from the general public; provides information as is appropriate and resolves public service complaints.
• Establishes positive working relationships with representatives of community organizations, state/local agencies, City management and staff and the public.
• Performs other related duties as assigned.

PHYSICAL, MENTAL AND ENVIRONMENTAL WORKING CONDITIONS

Position requires sitting, standing, walking on level and slippery surfaces, reaching, twisting, turning, kneeling, bending, stooping, squatting, crouching, grasping and making repetitive hand movement in the performance of daily duties. The position also requires both near and far vision when inspecting work and operating assigned equipment. The need to lift, carry and push tools, equipment and supplies weighing 25 pounds or more is also required. Additionally, the incumbent in this outdoor position works in all weather conditions including wet, hot and cold. The incumbent may use cleaning and lubricating chemicals, pesticides or herbicides which may expose the employee to fumes, dust and air contaminants. The nature of the work also requires the incumbent to climb ladders, use power and noise producing tools and equipment, operate hydraulic aerial devices, drive motorized vehicles and heavy equipment, work in heavy vehicle traffic conditions and often work with constant interruptions.

KNOWLEDGE/SKILLS/ABILITIES

The following are a representative sample of the KSA’s necessary to perform essential duties of the position.

Knowledge of:  Methods, practices and techniques of solid waste and refuse collection and disposal; practices, techniques and materials used in the collection and disposal of solid waste refuse; knowledge of the City street system; applicable federal, state and local laws, codes and regulations; operating characteristics and safety requirements for operation of trucks, refuse vehicles and other heavy and light equipment; defensive driving; proper lifting procedures; Principles and practices of lead supervision, training, and performance evaluation, including safety practices and related record-keeping; methods and techniques for record keeping; basic principles of mathematics; occupational hazards and standard safety procedures.

Skill to:  Safe, effective, defensive and attentive driving, along with experience using a variety of solid waste and refuse collection vehicles, equipment, tools and materials. 

Ability to:  Perform solid waste refuse collection and disposal; drive and operate solid waste and refuse collection trucks; respond to issues and concerns from the community; interpret, explain and apply applicable laws, codes and regulations; operate a variety of solid waste and refuse collection equipment, vehicles and tools; perform heavy manual labor for extended periods of time; work at substantial heights; respond to afterhours call-outs if assigned; organize, prioritize and follow-up on work assignments; work independently and as part of a team; make sound decisions within established guidelines; analyze a complex issue, and develop and implement an appropriate response; develop and coordinate collection route schedules, including identification of non-routine special routes/equipment needs related to special events/projects; inspect trucks for maintenance/replacement recommendations; act as a lead worker and perform advanced journey level solid waste refuse collection work related to area of assignment; follow written and oral directions; observe safety principles and work in a safe manner; communicate clearly and concisely, both orally and in writing; establish and maintain effective working relationships.

THE SELECTION PROCESS

The process may include an in-basket exercise, individual interviews, panel interviews and/or other related components.  Only those candidates who have the best combination of qualifications in relation to the requirements and duties of the position will continue in the selection process. The candidate selected for the position will be required to complete a background check including reference checks, fingerprint check, medical exam, drug-screening and/or other related components.

Human Resources will make reasonable efforts in the examination process to accommodate persons with disabilities. Please advise Human Resources of any special needs a minimum of five days in advance of the selection process exam by calling (916) 434-3229 or emailing hr@lincolnca.gov. The City of Lincoln is an Equal Opportunity Employer.

The information contained herein is subject to change and does not constitute either an expressed or implied contract.

The Maintenance Operations Department is recruiting for the position of Street Maintenance Worker I. 

This recruitment will close on June 6, 2024 at 5:00 PM (PT) or when the first 250 applications are received, whichever comes first. Please apply promptly. A resume must be submitted with the completed online application. Applications submitted without a resume may not be considered. Only online applications will be accepted.

The current vacancy is assigned to Asphalt and Concrete. If you are interested in employment in this job classification, you should apply to ensure you are considered for future opportunities that may utilize the candidates from this recruitment.

Examples of Job Duties: 

• Cleans work sites and equipment.
• Perform installation of various traffic control devices and markings.
• Drives truck with trailer.
• Performs heavy physical labor including lifting, carrying heavy objects; and shoveling, raking, and leveling asphalt.
• Clears and cleans roadsides, gutters, culverts and other drainage facilities.
• Participates in the removal, repair and replacement of storm drainage pipe.
• Sets-up and removes traffic safety zones for construction.
• Works in all weather conditions and in all terrain conditions.
• Works at all times of day and night.
• Perform preventative maintenance, adjustments and minor repairs on equipment.
• Cleans equipment, grease, lubricate, and fuel vehicles.
• Perform inspection and cleaning of drain inlets and storm lines.

Asphalt and Concrete Assignment:

• Repairs and replaces asphalt and concrete.
• Applies, rake, and tamp asphalt to perform Class A patching, skin patching, and sand sealing surface cracks.
• Uses rake, shovel, and pick in street repair work.
• Removes failed asphalt.
• Sprays oil on excavated area and over patches.
• Selects proper tip and angle of cut for jackhammer.
• Operates compressor, jackhammer and other power tools.
• Under supervision operate loader, backhoe, or storm drain cleaning machines.
• Performs concrete repair work.
• Cuts lumber for concrete forms to proper size and place stakes.
• Breaks up and remove concrete.
• Spreads and level base rock.
• Mixes concrete; pour concrete into forms, tamp, jitterbug surface.
• Applies concrete finish with trowel, screed, float or other tools.
• Patch holes with fresh concrete.

 
Traffic Safety Assignment

• Replaces, maintains and repairs guard rails, traffic dividers, signs, and similar traffic control devices.
• Assists in determining color of paint to be applied to street markings.
• Selects proper stencils for street markings.
• Applies stripes and intervals for new street markings.
• Places stencils over old street markings, start compressor and spray inside stencils.
• Cleans and maintains spray equipment, including stencil truck; place and pick up traffic cones during the operation of the striping machine.
• Prepares traffic signs.
• Applies sheeting to metal sign blanks for background color, numbering and lettering.
• Trim sign edges.
• Assists with street sign installation.
• Participates in the installation of raised pavement markers.
• Operates striping machine.

Street Sanitation Assignment

• Controls and remove litter.
• Removes drain outlet cover.
• Cleans storm drains and lines using hand and power tools.
• Under supervision, operates storm drain cleaning machines.

Marginal Functions
All Assignments:

• Receives and responds to public questions concerning current and projected work projects, location of streets, and directions.
• Changes backhoe buckets and teeth.
• Other duties as assigned.

THE POSITION

Perform professional civil engineering work in the planning, design, technical investigation, and construction of projects in public works, transportation, capital improvements, and structural engineering. An example of duties include:

• Participates in the preparation of plans and specifications for the construction of streets, storm drains, street lighting, traffic signals, buildings and related public works and City building projects; researches project design requirements; performs calculations and prepares estimates of material costs and time considerations.
• Researches publications and industry information sources.
• Develops and revises design and construction standards.
• Participates in the implementation of the City’s traffic and transportation engineering programs; prepares and revises plans and specifications for traffic related projects; prepares special studies and reports and coordinates major projects.
• Investigates field problems affecting property owners, contractors, and maintenance operations.
• Prepares estimates and feasibility reports for new or modified services and structures.
• Administers contracts and may assist with inspection services and project management for construction and maintenance projects.
• Participates in the plan check, review and processing of plans for private developments affecting streets, sewers, drains and related public works facilities and ensures that they meet all City imposed requirements.
• Prepares special engineering studies and reports.
• Coordinates planning, design, and construction activities with other City departments, divisions, and sections, and with outside agencies.
• Attends various staff and regional technical advisory meetings.
• Provides technical and professional assistance/support to other City departments and divisions, Planning Commission, and City Council as necessary.
• Performs other related duties as assigned.

MINIMUM QUALIFICATIONS

Equivalent to a Bachelor’s degree with major coursework in civil engineering or a closely related field;

OR

Possession of a current Engineer-in-Training Certificate, issued by the California State Board of Registration for Professional Engineers, and one (1) year of professional civil engineering experience.

License Requirements:

A valid California Class C driver license or higher with a satisfactory driving record is required at the time of appointment. Individuals who do not meet this requirement due to a disability will be reviewed on a case-by-case basis.

The Application Programmer performs or assists in the design, documentation, coding, testing, and implementation of new application programs or enhancements to existing application programs consistent with the Software Development Life Cycle (SDLC) best practices and applicable computer programming standards and frameworks. The position is primarily responsible for the suite of Bid-to-Bill applications as well as other business applications in use by the Agency. The position will work with other developer staff and supervisor during probationary status to learn and develop proficiency in the use of the Agency's software development frameworks, processes, and documentation design standards.

ESSENTIAL DUTIES AND RESPONSIBILITIES
This position requires that the incumbent reports for work on time and maintains satisfactory attendance in accordance with Agency policy; Ensures work responsibilities are covered when absent; Arrives to meetings and appointments on time; Performs special assignments as assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Level I: 
This classification is an entry-level position that is not expected to perform with the same level of independence of direction and judgment as higher levels. The level I works closely with other senior-level CTAs and is often given direction to complete tasks, install and troubleshoot hardware and software, perform system upgrades, evaluate and apply patches to systems, work closely with customers, and provide application support through help desk requests, and creates and maintains documentation.

Level II: 
This classification requires having all Level I duties and responsibilities with a minimum of two years of experience in software application development. Level II receives occasional direction and guidance from other senior-level CTAs; otherwise, uses developed experience and professional judgment to successfully complete projects in accordance with defined requirements and established timelines.

Responsibilities:
•    Within a specific hardware and operating system environment, work to define and design the operating features of new programs or enhancements
•    Produce appropriate conceptual-level application documentation for review and approval by the supervisor
•    Produce appropriate programming documentation for the review of the Supervisor, with sufficient detail on which to base programming activities
•    Develop computer programs in accordance with design documentation, closely following coding standards and conventions used within NCPA
•    Test applications using prescribed test methodology and tools
•    Develop an implementation plan, prepare production rollout for approval by the supervisor, and coordinate with the Ops team to execute the rollout
•    Maintain and enhance software applications
•    Conduct independent communications with user departments in a cooperative and professional manner
•    Provide emergency system support outside normal working hours as needed, on a rotational basis with other department employees
•    Travel to NCPA remote field sites to provide support to remote users as needed 
•    Assist in the evaluation of proposed new or modified computer system hardware and software

MINIMUM QUALIFICATIONS

Level I:
Education and/or Experience      
Bachelor's degree in Computer Science, Management Information Systems, Computer Engineering, or related field from an accredited four-year college or university and at least six months of related programming experience and training.

Level II:
Education and/or Experience      
Bachelor’s degree in Computer Science, Management Information Systems, Computer Engineering or related field from an accredited four-year college or university and at least two years of related programming experience and training. A minimum of two years in design and programming experience including some experience programming interactive programs. Experience must include exposure to systems analysis techniques.

KNOWLEDGE AND ABILITIES 
Knowledge:
Knowledge of VB.Net and/or C# as core programming language is essential; Integrated development environment (IDE) such as Microsoft Visual Studio; Source control management tools such as Team Foundation Server (TFS) and Git; JavaScript, HTML5, and Cascading Style Sheets (CSS) for developing web pages is highly desired; Oracle PL/SQL, SQL-Server T-SQL or similar SQL experience and understanding of relational database principles. Knowledge of software testing methodologies and tools, computer equipment and capabilities, data communications and local area networking, and client-server software is essential; Principles and programming techniques used to implement online interactive applications, technical report writing, systems analysis techniques, database management concepts, and management information system concepts; DevOps and related best practices; and knowledge of the Component-based Scalable Logical Architecture (CSLA) is an advantage.

Abilities:
Ability to write moderately complex programs and develop detailed program specifications; Demonstrate an understanding of MVC (Model-View-Controller; Stay up to date with related software development technologies through training, product research, and participating in conferences and user groups. Ability to work effectively with a broad, diverse cross-section of peers and various individual personalities; listen effectively, communicate with, and maintain a professional working relationship with co-workers; communicate clearly, efficiently, and professionally both over the phone and in person; Maintain strong organizational skills; and the ability to complete quality and timely work with minimal supervision.

SPECIAL REQUIREMENTS

Valid California Driver's License and insurance. 

This job has no supervisory responsibilities.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this Job, the employee is regularly required to sit and view and operate a computer, use hands to finger, handle, or feel, reach with hands and arms, and talk or hear. Requires manual finger dexterity and eye-hand coordination to operate and adjust office equipment such as computers. The employee is occasionally required to stand and walk. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, color vision, and the ability to adjust focus.

The noise level in the work environment is usually quiet.

All employees are responsible for contributing to an inclusive, safe, and secure work environment that values diverse cultures, perspectives, and experiences and is free from discrimination.

The City of Belmont Public Works Department is recruiting for the position of Senior Civil Engineer. First review of applications will be May 28, 2024 with interviews scheduled for May 30 and 31, 2024.

Why join our Team?

It's exciting to be part of the Belmont Public Works team.  We are an energetic, collaborative group that share a passion for serving our community and improving the place we live and work.  We will provide you with a wide rage of opportunities in a team-based collaborative environment while helping you achieve your professional goals.

Check out the Public Works homepage for more information: Public Works - City of Belmont

What You'll Do

The Public Works Department is responsible for the City's major capital projects and infrastructure including streets, sidewalks, streetlights, traffic signals, sewer and storm conveyance systems, and pump stations.  The Department is also responsible for the efficient management of the City's traffic operations and review of right-of-way impacts associated with private developments.

Transportation is and continues to be of importance to our Department and the community.  Traffic congestion plagues many of the peninsula cities.  Belmont has taken a proactive approach by continuously looking for transportation improvements, such as roundabout design, multimodal enhancements, and an adaptive signal operation system on our main East-West connection, Ralston Avenue.  Another pivotal project is the development of a citywide Transportation Master Plan, to help guide the City for its future growth.

Private development has grown significantly in the City the last 5 years, including biolife sciences, housing, and mixed-use developments.  Most notable are the Conceptual Development Plan and Development for the Belmont Stanford Campus at Notre Dame de Namur University and the Annexation of the Harbor Industrial Area from the County of San Mateo.

This invitation is focused on recruiting a Senior Engineer for private development and permitting services.  Key assignments include leading staff and managing consultants and contractors through the private development process, as well as managing the permitting services.  However, the Senior Engineer may be assigned to work in any of the work areas mentioned above.

In addition, the Senior Engineer assists in preparing and monitoring operating budgets in connection with assigned programs and contract management.  Effective communication skills and the ability to recognize the interconnectedness of the various civil disciplines and stakeholders are critical to the success of this position.  This position is public-facing and may be needed in planning commissions and city council meetings.  This position involves direct supervision of a growing team of 3-4 staff members, which may include engineers, engineering technicians, and contract staff.

Generally, the Senior Civil Engineer supervises, assigns, reviews, and participates in the work of staff responsible for performing professional and technical engineering services in the design and management of public works capital improvement projects, private development, permitting and other services, ensuring high work quality and adherence to established policies and procedures.

Positions at this level are distinguished from other classes within the series by the level of responsibility assumed and the complexity of duties assigned.  Employees perform the most difficult and responsible types of duties assigned to classes within this series, including management of the most complex engineering projects or exercising lead direction over lower-level staff.  Employees at this level are required to be fully trained in all procedures related to assigned area of responsibility.

The responsibilities and duties of the Senior Civil Engineer may include, but are not limited to, the following:

• Plan, prioritize, assign, supervise, review, and participate in the work of staff responsible for providing professional engineering services in the design and management of public works capital improvement projects.
• Establish schedules and methods for providing engineering services, identify resource needs, review needs with appropriate management staff, and allocate resources accordingly.
• Participate in the development of policies and procedures, monitor work activities to ensure compliance with established policies and procedures, and make recommendations for changes and improvement to existing standards and procedures.
• Recommend and assist in the implementation of goals and objectives and implement approved policies and procedures.
• Perform the more technical and complex tasks of the work unit, including management and administration of construction and professional services contracts.
• Supervise and participate in the work of lower-level engineering staff in the preparation of project plans, specification, cost estimates, and contract administration for capital projects.
• Supervise and participate in the inspection of capital projects, ensure compliance with applicable codes and regulations and provide resolutions to construction problems.
• Prepare and/or review professional civil engineering designs for assigned projects utilizing a variety of computer software programs, perform detailed calculations and computations, and prepare and/or review the adequacy and accuracy of computations, preliminary layouts, and design work from field and survey data.
• Review and approve changes to approved plans and specifications and process a variety of permits.
• Exercise professional engineering judgment in accordance with current accepted practice of civil engineering and appropriate laws and codes.
• Participate in the selection of technical engineering staff, provide or coordinate staff training, work with employees to correct deficiencies, and implement discipline procedures.
• Participate in the preparation and administration of assigned engineering program budget, submit budget recommendations and monitor expenditures.

To review the complete job description, visit www.belmont.gov

Final Filing Date:  First review of applications will be on June 7, 2024. NCPA reserves the right to close this posting once a sufficient number of applications have been received.
 

Under the direction of the IS Operations & Support Assistant Manager, the Database Administrator architects, tests, implements, maintains, and documents Agency databases. The database administrator collaborates closely with IS development and Agency operations personnel to provide backend database solutions for custom applications, including real-time, scheduling, and settlement programs. The database administrator troubleshoots and provides solutions for database problems.

Level III
This classification supports and maintains the Agency’s database infrastructure and related applications. Administers all database objects, including but not limited to schemas, tables, clusters, indexes, and views. Performs database re-organizations as needed to improve performance. Performs impact analysis of changes to be made to database objects before implementing significant schema changes. Ensures security for all databases by creating roles and associated privileges. Controls and monitors user access to databases. This is a journey-level position and is given minimal direction in job duties and responsibilities.  

Level IV
Architects and designs the Agency’s database infrastructure and ensures the highest levels of availability. Leads database projects to establish new database architectures. Oversees upgrades and implementations of new databases or related software.   Position can perform all lower level requirements and works independently with very little direction May be called upon to provide reports or present to the Agency’s Information Technology Committee. May direct the work of lower classifications.     

ESSENTIAL DUTIES AND RESPONSIBILITIES
This position requires that the incumbent reports for work on time and maintains satisfactory attendance in accordance with Agency policy; Ensures work responsibilities are covered when absent; Arrives to meetings and appointments on time; Performs special assignments for the Assistant Manager, Information Services or others as assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Responsibilities:
Design, create and maintain all Oracle databases required for development, testing, and production usage. 

Install, configure, upgrade, and troubleshoot Database server software for both stand-alone instances and Real Application Clusters (RAC). Includes patching both Oracle and Windows. 

Administer all database objects, including schemas, tables, clusters, indexes, views, sequences, constraints, packages, and procedures. This includes creating primary database storage structures (tablespaces) and primary objects (tables, views, indexes). Manage the sharing of resources between applications. 

Troubleshoot problems regarding the databases, servers, applications and development tools. Open technical support cases with support as needed and serve as primary support contact for NCPA. 

Perform capacity planning for all databases. Work closely with IS storage and system administration staff to plan and allocate database system storage. 

Experienced with creating, managing, and maintaining data warehouse technologies.

Perform ongoing monitoring and tuning of all database instances and Windows servers to optimize database performance and reliability. 

Plan and implement backup and recovery of Agency databases. Maintain remote standby databases using archive logs.

Implement and enforce security for all of the Databases through creating and maintaining users and roles, and assigning privileges. Control and monitor user access to the database. 

Perform database re-organizations as required to improve performance and ensure maximum uptime of the database. Modify the database structure from information given by application developers. Gather statistics, create indexes, create or expand tablespaces as needed. 

Perform SQL and PL/SQL tuning and performance monitoring. 

Set up and maintain documentation and standards for database practices and procedures. 

Provide technical support to application developers and database users. 

Perform impact analysis of changes to be made to database objects. Approve and implement/oversee significant schema changes and changes to database design. 

Provide support during non-standard hours (on an as-needed basis, on-call 24x7x365). 

Provide a strategic database direction for the organization.

MINIMUM QUALIFICATIONS

Level III:
Education and/or Experience
A bachelor’s degree from an accredited four-year college or university in Computer Science, Management Information Systems, Engineering, or a related field and five or more years of related experience and/or training, or an equivalent combination of education and experience.

Level IV: 
Education and/or Experience 
A bachelor’s degree from an accredited four-year college or university in Computer Science, Management Information Systems, Engineering, or a related field and eight or more years of related experience and/or training, or an equivalent combination of education and experience.

KNOWLEDGE AND ABILITIES 

Knowledge:
Knowledge of Oracle database; Oracle Recovery Manager (RMAN), Real Application Clusters (RAC); Oracle Automatic Storage Management (ASM), SQL, PL/SQL; Microsoft SQL Server; Windows; networking; virtual machines; batch/cmd scripting; PowerShell, SQL*Plus; Toad, GIT; physical database design; relational database theory; disaster recovery; back-up and recovery, relational database theory; Windows and Linux system administration; the Oracle optimizer and execution plans; troubleshooting and debugging, networking (TCP/IP), database security.

Abilities:
Ability to write complex programs and develop detailed program specifications; Ability to analyze data and situations, reason logically and creatively, identify problems, draw valid conclusions, and develop effective solutions; Ability to apply creative thinking in the design and development of methods of processing data with electronic computers; Ability to establish and maintain cooperative working relationships with those contacted in the course of the work; Ability to communicate effectively verbally and in writing, and prepare effective reports.

SPECIAL REQUIREMENTS

Valid California Driver's License and insurance as occasional travel may be required. 
While performing the duties of this job, the employee is regularly required to sit. The employee is occasionally required to stand and walk. Occasionally, the employee may be required to perform simple grasping and fine manipulation, use telephone, write or use a keyboard to communicate, crouch, crawl, reach and lift equipment up to 40 lbs. 

Level III: This job has no supervisory responsibilities. 

Level IV: This job may have supervisory responsibilities.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The noise level in the work environment is usually moderate.

All employees are responsible for contributing to an inclusive, safe, and secure work environment that values diverse cultures, perspectives, and experiences and is free from discrimination.