Search Jobs

The City of Belmont Public Works Department is recruiting for the position of Mechanic.

The City’s Mechanic position is responsible for maintaining, servicing, and repairing all City-owned vehicles and light and heavy equipment; troubleshooting and diagnosing vehicle malfunctions; performing preventive maintenance on vehicles and equipment; and performing a variety of tasks relative to assigned area of responsibility.  The Mechanic receives general supervision from the Senior Mechanic.

Recruitment Timeline

Deadline for Applications – July 20, 2025 at 11:59PM

First Round Interviews – Week of July 28, 2025

Department Interviews - Week of August 4, 2025

*Dates may be subject to change

The responsibilities and duties of the Mechanic may include, but are not limited to, the following:

• Inspect, diagnose, maintain and repair mechanical defects in vehicles, light and heavy equipment, trucks, tractors, rollers and related City equipment.
• Troubleshoot and repair problems in vehicle electrical, cooling, brake and steering systems; change and repair tires as needed.
• Inspect, diagnose and maintain batteries, alternators, voltage regulators and electrical engine controls; install new lights, wires, alternators, distributors, relay lights and switches.
• Disassemble engines, transmissions, clutches and other driveline components; perform general overhauling.
• Tune, repair and adjust engines, transmissions, drive shafts, rear-ends and smog components on City vehicles and power driven equipment; lubricate and change oil and filters.
• Replace and/or repair any worn parts in vehicles, trucks, tractors, sweepers, rollers and other mechanical equipment including but not limited to spark plugs, brakes, master cylinders, wheel cylinders, wheel bearings, clutches and exhaust systems.
• Perform welding as required to repair equipment.
• Maintain accurate and up-to-date records of time, work, parts, materials and outside service costs.
• Perform duties while utilizing a variety of hand tools and other equipment including brake tools, drill presses, grinding equipment, welders, cutting torches, lifts and related equipment; operate all tools and equipment in a safe manner.
• Estimate cost and time of procedures; prepare invoices.
• Maintain cleanliness in the shop area.
• Perform related duties and responsibilities as required.

To review the complete job description, visit Mechanic Job Class Specification

North Coast County Water District is seeking a qualified individual to perform a variety of mechanical tasks in support of the District’s Operations Department. Interested candidates should apply for one of the following positions depending on their experience and qualifications: Mechanic or Plant Technician.

Review full position descriptions at www.nccwd.com/resources/employment.html

The City of Menlo Park is currently accepting applications to fill a Mechanic vacancy in the Fleet Services Section of the Public Works Department. A Mechanic performs diagnostic, maintenance and repair services on light and heavy city vehicles and equipment, such as automobiles, storm/sewer trucks, aerial bucket trucks, dump trucks shuttle buses, construction equipment, lawn mowers, small equipment and stationary generators; and performs other duties as assigned.

The Mechanic performs a range of skilled tasks requiring journey level mechanical ability and aptitude. Work assignments are performed according to established rules and procedures. Independent judgment is required and is supported by supervisory review and direction.

Equipment Mechanic

Responsible for performing the full range of mechanical, electrical, hydraulic, pneumatic, gasoline and diesel repair and maintenance required for City vehicles, and equipment. Responsibilities include inspecting and attending to assigned areas in a timely manner, and performing a wide variety of tasks in the maintenance and repair of assigned vehicles and equipment. Incumbents are expected to work independently and exercise judgment and initiative. Positions at this level receive only occasional instruction or assistance as new or unusual situations arise and are fully aware of the operating procedures and policies of the work unit. This class is distinguished from other maintenance class series in that it performs more highly skilled technical and mechanical maintenance activities. This class is distinguished from Senior Equipment Mechanic in that the latter leads, trains, and oversees assigned work and performs the more complex and difficult work in mechanical maintenance and repair of City vehicles and equipment.

The City of Menlo Park is currently accepting applications for a temporary Equipment Mechanic in the Fleet Services Section of the Public Works Department. A temporary equipment mechanic performs diagnostic, maintenance and repair services on light and heavy city vehicles and equipment, such as automobiles, storm/sewer trucks, aerial bucket trucks, dump trucks shuttle buses, construction equipment, lawn mowers, small equipment and stationary generators; and performs other duties as assigned.

The temporary equipment mechanic performs a range of skilled tasks requiring journey level mechanical ability and aptitude. Work assignments are performed according to established rules and procedures. Independent judgment is required and is supported by supervisory review and direction. Equipment mechanics are required to provide their own tools and equipment.

Sewer Authority Mid-Coastside (SAM), located in Half Moon Bay, is seeking a candidate for the full-time position of Wastewater Operator. This is a flexibly staffed position and can be filled at the Wastewater Operator II or III level. First review of applications is August 7, 2024. Interviews scheduled for August 21, 2024.

Don’t miss this opportunity to work with a highly dedicated team and bring your knowledge and experience to assist in continuing to make Sewer Authority Mid-Coastside a great place.

SAM offers competitive benefits which include Health, Dental, Vision, Life Insurance, Flex Spending and retirement through CalPERS.

FULL POSITION DESCRIPTION: https://samcleanswater.org/careers

TO APPLY: https://apptrkr.com/5418619
__________________________________________________________________________________________________________

Wastewater Operator II

$ 47.36 – $56.56 Hourly

$3,789 – $4,525 Biweekly 

Wastewater Operator II - A journey level classification in the Wastewater Operator series. The ideal candidate must be skilled in basic principles of mechanical, maintenance, and electrical systems. Must be able to recognize and report unusual, inefficient, or dangerous operating situations. Must have working knowledge of the functions and purpose of wastewater disposal systems; routine cleaning and basic operation of wastewater treatment equipment. Must have knowledge of algebra and geometry as required to perform the responsibilities of the position; basic knowledge of electronics and hydraulics. Must have excellent communication skills, work cooperatively with those contacted in the course of work, and have a dedication to safe working practices. Must be able to work on-call as assigned. Work independently, as needed. 

Requires a High School Diploma or equivalent and two years of full-time experience in a wastewater treatment facility in a position equivalent to a Wastewater Operator I. Possession of a Grade II California Wastewater Treatment Plant Operator certificate issued by the State of California Water Resources Control Board. 

__________________________________________________________________________________________________________

Wastewater Operator III

$52.09 -$62.21 Hourly

$4,167 - $4,977 Biweekly

Wastewater Operator III-An advanced level classification in the Wastewater Operator series. The ideal candidate  must be skilled in inspecting, operating, and maintaining a wastewater treatment plant and related lift stations including primary, secondary, tertiary and solids treatment processes. Must be able to recognize inefficient, unusual, or dangerous operating conditions. Solid experience in basic principles of mechanical, maintenance, and electrical systems; algebra and geometry; basic knowledge of electronics and hydraulics.  Must have good trouble shooting skills, attention to detail, excellent communication skills, training and leadership abilities, and have a dedication to safe working practices. Must be able to independently perform plant operations work; work on-call as assigned.

Requires a High School Diploma or equivalent and three years of full-time experience equivalent to a Wastewater Operator II in a  wastewater treatment facility.  Possession of a Grade III California Wastewater Treatment Plant Operator certificate issued by the State of California Water Resources Control Board.   

Position Summary

 

Under supervision, performs inspection, maintenance, troubleshooting, diagnosis, repair, removal, replacement and testing necessary to maintain all District vehicles, including record keeping and written verification of work accomplished as directed. 

 

Essential Responsibilities

 

• Responsible for major rebuilding, repair and/or removal and replacement of engines, transmissions, clutches, differentials, turbochargers, pumps, motors, injectors, cylinder heads, compressors and hydraulic systems, air brake, air systems, steering, air conditioning, and electrical systems and associated vehicle parts.
• Provides minor and incidental repairs to vehicles in general, including manufacture and/or repair of components to maintain equipment.
• Performs ongoing preventive maintenance, inspections and procedures, as directed, to provide the safest, cleanest, most economical and dependable transportation possible for District utilization.
• Provides normal and reasonable care of all District-owned property and tools provided
• Directly responsible for written communication concerning ongoing status of repairs completed, repairs in progress and outstanding repairs necessary to safely and economically provide vehicles for District transportation needs.
• Participates in general repairs necessary to all mechanical equipment supplementary to vehicle repairs and maintenance as directed.
• Generates and completes work orders in a Computerized Asset Management System (IBM Maximo).
• Assists apprentice mechanics, new employees and current employees in pursuing a high level of production, reliability and safety.
• Adheres to the safety and health rules and safe working practices applicable to his or her job
• Establishes and maintains effective working relationships with District employees, customers, vendors and all others contacted during the course of work using principles of excellent customer service. 
• Performs additional related duties as assigned 
• Regular and reliable attendance and performance are required

 

Minimum Qualifications

 

Education and/or Experience: 1) Completion of four (4) year apprenticeship program or approved equivalent; OR four years’ full-time experience in the repair of heavy duty diesel engines, air brakes, transmissions, differentials, and D.C. electrical; 2) Experience in the operation of machine tools common to repair shops, such as grinders, drill press, valve facers, lathes, boring bars, presses, etc.

 

Required License:  Must possess and maintain a current, valid California driver's license and satisfactory driving record. No more than two moving violations within the last 3 years. No DUI’s or Reckless Driving violations within the last 7 years. Must be able to obtain a Class A or B license with “P” endorsement within the six-month introductory/probationary period. Operates District vehicles on a regular basis.

 

REQUIRED TOOLS:

• Must have a full set of journey level hand tools to accomplish assigned work.

  

HOURS:

• Shifts are scheduled based on seniority in classification.
• Maintenance Department operates 7 days per week, 24 hours per day.
• Must be available to work all shifts.

 

PHYSICAL REQUIREMENTS: Occasionally lift up to 100 lbs. maximum with assistance.  Frequently lift, carry and manipulate up to 50 pounds. Working inside and outside in all weather conditions. Works around fumes, odors and dust in an occasionally high noise level environment with appropriate personal protective equipment.

 

Required Knowledge, Skills and Abilities

 

Knowledge of: 

• Common maintenance and repair practices related to heavy duty diesel engine, transmission, steering, electrical, electronic controls, air, hydraulic, brake, fuel and power train systems 
• Common maintenance and repair practices relating to multiplex and programmable logic controller electronic control systems
• District Policies and Labor Agreement (MOU) Provisions
• Occupational health and safety rules and working practices applicable to this position 

 

Skills or Ability to: 

• Use grinders, drill press, diagnostic computers, digital volt/ohm meters, smog testing equipment and other tools and equipment commonly found in a bus/truck fleet shop environment
• Troubleshoot, diagnose, repair and/or replace components common to bus, truck, and automotive equipment fleets
• Read, understand, follow and/or apply oral and written instructions such as complex technical instructions in maintenance manuals, wiring diagrams and schematics, and technical service publications
• Communicate clearly and effectively both orally and in writing 
• Establish and maintain cooperative and productive working relationships 
• Perform computerized data entry and basic business office technology functions such as use of email, data entry, work order processing and materials requisition

TO VIEW JOB ANNOUNCEMENT, CLICK JOB PDF OR JOB ANNOUNCEMENT URL BELOW.

TO VIEW JOB ANNOUNCEMENT, CLICK JOB PDF OR JOB ANNOUNCEMENT URL BELOW.