Search Jobs

San José Clean Energy, or SJCE, is San José's local, not-for-profit electricity supplier operated by the City of San José's Energy Department. Since 2019, our dedicated and motivated team has provided clean energy for residents and businesses at competitive rates, while also offering community programs, local benefits, and increased transparency and accessibility.

San José Clean Energy serves more than 350,000 customers and has a peak load of almost 1 GW. SJCE is responsible for purchasing over 4,500 GWh of electricity annually and has an annual operating budget of over $300 million. Serving our community with respect and integrity is at the core of what we do. Joining our team means that you will be making a big impact and in the forefront in the fight against climate change. SJCE plays an important role in meeting San José's ambitious goal to be carbon neutral by 2030 and in implementing Climate Smart San José, the City's climate action plan.

SJCE centers equity in its drive to provide clean, renewable energy at competitive rates and provide local benefits. Since inception, SJCE has sprinted ahead to now provide 60% renewable and 95% carbon-free energy in our base product and has contracted to add over 1GW of new solar, wind, and battery storage to the grid. SJCE's low carbon energy supply is foundational as we work to meet the electrification goals outlined in Climate Smart San José. For more information about San José Clean Energy, please visit: www.sanjosecleanenergy.org .

This department is seeking to fill one (1) full-time Power Resources Specialist I/II position to support the Power Resources Division.

The Power Resources Specialist I/II position reports to a Principal Power Resources Specialist in the Power Resources Division. This position is part of an exciting, fast-paced team responsible for procuring hundreds of megawatts of renewable energy projects.

The selected candidate will have the following duties and responsibilities:

• Supports the preparation, issuing, and evaluation of solicitations related to Energy, Resource Adequacy and Renewable Energy Credits.
• Assists with the evaluation of pre- and post-release solicitation materials for long-term energy projects such as stand-alone and collocated energy storage, wind, and solar resources.
• Assists in the management, analyzing, and enforcing of power contracts, including long-term energy contracts through development, construction, and operation.
• Assists in the management and resolution of matters related to resources performance within the California Independent System Operator's energy and capacity markets.
• Supports SJCE Scheduling Agent, particularly focusing on stand-alone and collocated storage and renewables, based on SJCE's internal strategies and policies.
• Conducts primary research related to SJCE obligations within the CAISO, CPUC, and other regulatory frameworks with particular focus on matters related to stand-alone and collocated storage, and renewable energy assets.
• Participates in completing analysis and prepare procurement plans, including managing consultants, and developing procurement strategies.
• Supports and undertakes projects related to power, procurement, and validation; assists in the approval of energy purchases or sales of surplus energy.
• Participates in joint procurement with other Community Choice Aggregators (CCAs) and CA Community Power.
• Develops and maintain relationships with power suppliers and consultants.
• Assures compliance with Federal, State, and local requirements.

The ideal candidate is a highly motivated individual with strong analytical, quantitative , and problem-solving skills. The candidate should have effective communication skills, show attention to detail, and be able to work independently. Candidates that are highly collaborative with colleagues and outside stakeholders are ideal.

LATERAL HIRING INCENTIVES

Hiring Bonus $2,500 - $10,000 (DOE)

 50 Hrs. Sick & 50 Hrs. Vacation (@ Hire)

Reduced Field Training Program

Reduced Probationary Period

Relocation Assistance May Be Available

(*Lateral Hiring Incentives Eligibility: Must be currently employed in a California municipal or state police agency, county sheriff’s department or California Highway Patrol, or similar as defined in California Penal Code §830.1 or §830.2)

About The Position:

The County of Yuba is actively recruiting to fill current vacancies and establish an eligibility list for the position of Deputy Sheriff. Deputy Sheriff’s perform a wide variety of patrol officer and related duties required to effectively respond to and resolve the normal scope of peace situations, including the protection of life and property, enforcement of laws and ordinances, criminal investigation, report writing, crime prevention and suppression, case preparation and testimony, and providing information and assistance to the public and perform related duties as assigned. Incumbents may be assigned to a specific geographic area for patrol, investigations, crime prevention or other peace officer-related functions. 

The City of Berkeley is now accepting applications for the position of Health Services Program Specialist! In this role, you will plan and manage a specialized health program. Program-planning activities will include development of procedures for operation and evaluation and fiscal and budgetary administration. You will also liaise with program personnel to assure proper integration of program planning and evaluation with program operations. 

MINIMUM QUALIFICATIONS
A typical way of gaining the knowledge, skills, and abilities for this position is:
Equivalent to graduation from a college or university with major course work in public health, health or social-services related field, or health-related public policy, and two years of experience as a health/social services professional.

One year supervisory experience which has included budget and program development is desirable.

Other requirements: Must be willing to work evenings and weekends and be able to travel to various locations within and outside the City of Berkeley to meet the program needs and to fulfill the job responsibilities. For automobile travel, a valid California driver's license and satisfactory driving record are required.

APPLICATION PROCESS
Applications must be received by 5:00 PM Pacific on June 10, 2024 and must include a completed application and answers to the supplemental questions. Please note that resumes are not a substitute for a completed application.

Applications are available in alternative formats (audio-format, braille, large print, electronic text, etc.) upon request to ada@berkeleyca.gov. Please allow 10 days for production of the material in an alternative format.

Lateral Hiring Incentives*

• Hiring Bonus $2,500 - $10,000 (DOE)
• 50 Hours Sick & 50 Hours Vacation (@ Hire)
• Relocation Assistance May Be Available

(*Lateral Hiring Incentives Eligibility: Must be currently employed with a another recognized law enforcement agency.)

The County of Yuba is actively recruiting to fill current vacancies and establish an employment list for the position of Public Safety Dispatcher within the Sheriff’s Department.  The incumbent receives 9-1-1 system sheriff, fire, medical emergency and rescue calls; dispatches sheriff, fire and medical personnel following established procedures; maintains communication with officers in the field to ensure safety and provide back-up and information; provides relief coverage for the records unit; and performs related work as assigned. These classifications require shift work and the ability to make decisions and act appropriately in stressful situations. The work also involves interdepartmental cooperation with various public safety agencies located throughout the County to coordinate the most effective response to requests for assistance from the public.

The City of Livermore is currently accepting applications for the position of Water Resources Mechanic I/II.  There are 2 vacancies can be filled at the I or II level. Apply online at www.LivermoreCA.gov!

WR MECHANIC I - $6,757.36 - $8,199.65 MONTHLY
WR MECHANIC II - $7,621.28 - $9,249.76 MONTHLY

Water Resources Mechanics perform a wide range of tasks involving mechanical maintenance and repairs of pumps, plumbing systems, electric motors, compressors, piping, boilers, underground infrastructure, facilities and buildings, carpentry, HVAC systems, mechanical drives, gear boxes, blowers, collectors, belt filter presses, and chemical feed systems. The work is done at the Water Reclamation Plant, located at 101 West Jack London Boulevard in Livermore.

A Water Resources Mechanic I performs a range of tasks requiring journey level mechanical ability and aptitude. Work assignments are performed according to established rules and procedures. Independent judgment is required and is supported at regular intervals by supervisory review and direction. A Water Resources Mechanic II is distinguished from the WR Mechanic I by the possession of advanced journey level mechanical ability and aptitude and is responsible for solving more difficult technical problems.

Please visit this link to view the job posting:

https://www.governmentjobs.com/careers/marinwater/jobs/4516970/field-pipeline-locator-intern?pagetype=jobOpportunitiesJobs

Located in Middletown, CA!

The Mechanic Operator position consists of five levels of competency.  Individuals can either enter into the classification at the beginning level of the job or somewhere between the entry level and the top step depending on the qualifications brought with them.  It is the expectation of NCPA that all employees progress to the top level.  In order to progress to the top level an employee must complete all components in a competency level within the associated training matrix.  Employees who successfully complete a training level matrix and who received a rating of “meets requirements” or higher by their immediate supervisor will be promoted when qualified.  Upon completion/demonstration of competencies employees will be expected to perform work in all completed levels and other job-related duties as required. All employees have the right to challenge any component in the training matrix by proving proficiencies verbally and practically.

General Scope of the Job
Under general supervision of the Mechanical Maintenance Supervisor and at times under the general direction of the Mechanic Operator Lead Person; to maintain, repair, adjust, install, and test, powerplant steam field, water injection systems and equipment and maintain lease site grounds.  The measure of accuracy and reliability is the safe, effective and efficient performance of the Facilities.  This position is predominately mechanic based with operation support as outlined below.

Description of Duties and Responsibilities
Level III:
This level of the Mechanic Operator position requires the completion of all Level III training requirements. The employee must perform the duties as described below and as defined in lower levels while attaining Level IV skills and experience through academic and hands-on training. Level III knowledge and skills focus on journey level mechanical duties and responsibilities.
•    Inspects, tests, calibrates, installs, rebuilds, adjusts, repairs and aligns all mechanical equipment such as hydraulic control systems, turbines, generators, cooling tower, pumps, electric motors, valves, gear reducers, compressors, blowers heat exchangers, HVAC systems excluding refrigerant replacement, fire protection systems, diesel and gas engines, mufflers, separators, traps, rock catchers, tanks, pipeline and pipe supports.
•    Maintains facility structures. 
•    Performs basic inspections and repairs various rigging equipment, fixtures and cranes.
•    Assists the scaffolding qualified journeyman in maintaining, and repairing scaffolding. 
•    Inspects and maintains safety devices such as harnesses and rescue equipment.
•    Works with Safety Manager to maintain records of regulated equipment.
•    Keeps accurate records of equipment history, reports and work orders on computer for CMMS.  Works with CMMS personnel for accuracy and reliability.
•    Performs preventative maintenance and assessments on various plant equipment.
•    Writes Work/Operating Procedures within area of expertise.
•    Requisitions replacement parts and supplies to carry out assigned tasks.
•    Makes working drawings of components and changes made to Plant systems relative to area of expertise.
•    Installs, inspects, tests, repairs, rebuilds, and maintains equipment such as portable and fixed site pumps, valves, mufflers, separators, traps, rock catchers, turbines, generators, motors, gear reducers, compressors and hydraulic control systems, pipelines, tanks, pipeline supports, effluent piping components.
•    Maintains lease site grounds structures, culverts, roads, drains and ditches.
•    Examines and diagnoses malfunctions or defective equipment on pumps, motors, valves, separators, vents, air vacuum breakers and compressors; disassembles/reassembles, overhauls and adjusts defective equipment
•    Installs, fits and calibrates equipment replacement parts.  Observes equipment operation.  Adjusts equipment to operational specifications using specialized tools and precision measuring instruments.
•    Disassembles, removes, repairs, replaces, assembles and aligns pipes, pipeline components, and valves repairing or replacing broken and worn parts using various hand tools.
•    Observes and directs contractors while digging trenches, cleaning tanks and maintaining lease site grounds.
•    Under the direction and training of operations, assists with clearances on steam field and effluent pipeline equipment for maintenance purposes.
•    Will be trained to Rig and lift equipment to install, repair or replace equipment.
•    Instructs and trains workers in repair and maintenance procedures of steam field, power plant and effluent pipeline equipment.
•    Maintains inventory of tools and materials for the maintenance work at the steam field and effluent pipeline.
•    Maintains steam field equipment records on work completed on CMMS or equivalent maintenance program.
•    Assists other classifications when needed.
•    Performs other job-related duties as required.
•    Acquire OSHA certified training to meet business needs.
•    Trains and advises other workers in the maintenance and operation of steam field and effluent pipeline equipment.
•    Maintains and repairs Hydraulic Control Systems.

Level IV:
This level of the Mechanic Operator position requires the completion of all Level IV training requirements for operational duties and responsibilities.  The employee must perform the duties as described below and as defined in lower levels while attaining Level V skills and experience through academic and hands-on training.
•    Reviews, coordinates and reports work orders, work activities and equipment clearances with appropriate personnel.  
•    Checks equipment to be cleared in advance to guarantee its condition to others.  Informs Operator Technician Lead Person and Supervisors of the status of equipment and systems.  
•    Under direction of the Operator Technician Lead Person or a designee, operates various equipment and performs basic equipment clearances on low voltages (<600 volt) electrical breakers, steam line equipment and effluent equipment.  
•    Terminates and connects motor wiring to facilitate bearing repairs (less than 600 volts.).
•    Conducts online test of equipment before certifying its status and performance.

Machinist Duties and Responsibilities
•     Sets up and operates machine tools to repair or reproduce equipment parts and fittings working from blueprints or defective parts using precision tools and measuring instruments.
•    Fabricates special tools, rigging equipment and replacement parts to repair equipment.   
•    Fabricates, modifies, shapes and repairs equipment parts using a variety of metal working machines.
•    Chips, grinds, bores, and drills equipment parts.
•    Verifies conformance of finished work piece to specifications, using precision measuring instruments.
•    Calibrates, fits and assembles equipment parts according to drawings and specifications using machine tools, power tools, and measuring instruments.
•    Installs machined replacement parts; starts and observes equipment operation to detect malfunctions or out-of-tolerance performance, adjusts as necessary.
•    Maintains shop equipment and tools.
•    Maintains inventory of machining tools.

Representative Physical and Job Demands
•    Regularly talks and listens to others to exchange and obtain information to direct the operation and maintenance of Geothermal Facility steam field and effluent equipment.
•    Regularly reaches, grasps, pushes and pulls various wrenches, hand tools, and other objects using manual dexterity and eye hand coordination to operate and maintain equipment.
•    Regularly climb ladders and walks on platforms near high temperature surfaces; works on slippery or uneven surfaces in precarious places.
•    Frequently walks, reaches, kneels and crouches using feet, legs, hands and manual strength to access and operate plant equipment.
•    Occasionally lifts and moves pumps motors and pipe weighing up to 50 pounds.
•    Routinely works near heated surfaces; works on slippery or uneven surfaces in precarious places to adjust or operate equipment.
•    Occasionally exposed to high voltage and other electrical hazards while working on equipment.
•    Routinely works in outside weather conditions and is exposed to chemicals, wet and humid conditions, extreme cold and heat while inspecting and maintaining equipment.  The noise level is frequently very loud.
•    Routinely listens to operating sounds of equipment to diagnosis equipment malfunctions.
•    Frequently operates forklifts cranes, air compressors, sandblasters and power tools to maintain and repair equipment.
•    Frequently operates Agency vehicles going to and from job locations.

Job Expectations
Acquisition and Use of Technical Knowledge
•    Possesses or acquires as needed the ability to detect, diagnose disassemble and repair steam and water equipment with a fundamental knowledge of; turbine equipment, and auxiliary systems and their capabilities; operation processes, mechanical and electrical theory and background to operate equipment; measuring devices and hand tools for maintenance work; general contamination and control practices and procedures; basic math, geothermal powerplant rules and regulations; clearance procedures, physics including pump mechanics; basic principles of thermodynamics and fluid flow.  Given this basic knowledge, understands own role within the plant and how that role requires the use of knowledge applied to practical, day to day, operations and maintenance demands.  Hold self-accountable to acquire knowledge that may be needed when a job situation changes, new tasks are introduced to the job, or when improved performance requires acquiring extended or specialized information.
•    Possesses or acquires as needed an extensive knowledge of safety, fire, and security rules and procedures.  Given the emphasis of safety at the plant, uses knowledge to improve plant conditions and the organization’s safety record.
•    Acquires knowledge of operations and maintenance procedures on a continuing basis to stay current as a significant contributor to plant solutions, safety performance, and operations and maintenance improvements.
•    Confers with Operator Technician Lead Person or Operations Supervisor to resolve system problems and offers a variety of workable solutions to complex problems and report status of systems and equipment.  
•    Identifies problems or trends with systems and equipment early to prevent operator or electrical errors. 
•    Passes knowledge on to other employees as a way to contribute to the performance of others, or get a job done.
•    Assesses own limitations with the fundamental knowledge needed to perform in the job.

Application of Technical and General Job Skills
Technical and job skills are indicated by demonstrating an ability to:
•    Efficiently and effectively operate, control, and maintain equipment, and be accountable for aspects of the job at the Geothermal Facility. 
•    Implement or use existing methods to control the waste of time, money and material resources, such as:
o    Acting to improve work procedures 
o    Conserving resources 
o    Expediting a job
o    Completing a work assignment efficiently
o    Completing long term work in an orderly fashion
•    Work with management to identify and learn from mistakes made and apply what is learned to future situations or plant conditions.
•    Establish and maintain effective work relationships with those contacted in the performance of required duties.
•    Review own action to determine the cause of poor working relationships so those relationships can be improved
•    May be required to work extended hours and on normal days off.
•    Operate Agency vehicles and equipment safely.

Training and Experience Requirements
Level III: Completion of the NCPA Level III training program or three years of equivalent journey-level mechanical experience.
Level IV: Completion of the NCPA Level IV training program or three years of equivalent journey-level mechanical experience and operations experience.

Driver’s License Requirement
Possession of an unrestricted Class C California operator’s license issued by the State of California, Department of Motor Vehicles.  Possession and maintenance of a good driving record as demonstrated by the absence of multiple or serious traffic violations or accidents within the last three (3) years.

Desired Qualifications 
•    Possession, or ability to obtain with training, a Class A California operator’s license issued by the State of California Department of motor Vehicles.
•    Ability to set up and operates machine tools to repair or reproduce equipment parts and fittings working from blueprints or defective parts using precision tools and measuring instruments.
•    Ability to Fabricate special tools, rigging equipment and replacement parts to repair equipment.   
•    Ability to Fabricate, modifies, shapes and repairs equipment parts using a variety of metal working machines.
•    Chips, grinds, bores, and drills equipment parts.
•    Verifies conformance of finished work piece to specifications, using precision measuring instruments.
•    Calibrates, fits and assembles equipment parts according to drawings and specifications using machine tools, power tools, and measuring instruments.
•    Installs machined replacement parts; starts and observes equipment operation to detect malfunctions or out-of-tolerance performance, adjusts as necessary.

EOE

We have exciting internship opportunities available at the City of Millbrae’s Public Works Department.  The Public Works Department is looking to hire two (2) interns for the Engineering Division. This is an open-ended internship without a specific term. The working schedule is to be determined based on business needs and candidate availability, and no more than 1,000 hours in a fiscal year.

The Engineering Division interns would be working on various infrastructure projects, such as streets, sewer, bridge/structural, permitting, and document management.  Interns will assist the engineers by writing reports or conducting field visits to solve construction issues.  Interns would report to the Senior Engineers located at the Corporation Yard at 400 East Millbrae Avenue.

We encourage anyone interested in municipal engineering to apply.  Jump start your career early through participating in these valuable, paid internships.  Join the Millbrae team to learn and experience City government! 

SUMMARY:  Under close supervision, performs a variety of entry-level administrative tasks and special projects; assists in the coordination of administrative activities and analysis of department systems and procedures; and performs related work, as required.

ESSENTIAL FUNCTIONS: -- Essential functions, as defined under the Americans with Disabilities Act, may include any of the following representative duties, knowledge, and skills.  This is not a comprehensive listing of all functions and duties performed by incumbents of this class; employees may be assigned duties which are not listed below; reasonable accommodations will be made as required.  The job description does not constitute an employment agreement and is subject to change at any time by the employer.  Essential duties and responsibilities may include, but are not limited to the following:

• Research, compile, tabulate, and analyze data for a variety of administrative and departmental matters.
• Assist department personnel in assigned administrative, planning, organizational, technical, and professional tasks.
• Provide suggestions or recommendations regarding department specific projects.
• Prepare and present reports; draft policies and procedures; respond to requests for information. 
• Perform specific department related duties and tasks as required.

MINIMUM QUALIFICATIONS:

Education, Training and Experience Guidelines: 

Proof of enrollment in a college or university OR recent graduates with paid or volunteer work experience, which demonstrates the ability to successfully perform the duties of the position.  Major course of study may be in one of the following areas: Business Administration, Public Administration, Accounting, Architecture, Computer Science, Engineering, Urban Planning, Human Resources, Communications, Recreation Administration, OR a related field of study. Education and experience will be evaluated based on the actual position.

Knowledge of: 

• Principles and practices of public administration and organization applicable to a local agency.
• Administrative techniques; statistical practices and methods of graphic presentation.
• Modern office methods, practices, procedures, and equipment, including personal computers and modern software and spreadsheet programs.
• Elements of business writing and proper use of English, vocabulary, spelling, punctuation, and grammar.  

Skill in:  

• Providing efficient customer service and communicating clearly and objectively both verbally and in writing.
• Organizing with the ability to prioritize work and exercise independent judgment, wisdom, common sense, and initiative.
• Thoroughly carrying out oral and written instructions.
• Gathering and analyzing data; preparing narrative reports and performing numerical analysis.
• Evaluating and recommending changes to policies, programs, and practices.
• Conducting research; proficiently utilizing a personal computer in completing special projects. 
• Following written and oral instructions with minimum supervision; effectively presenting information in writing and orally to the general public, outside agencies, and fellow employees. 
• Speaking effectively in a public forum on related topics and issues. 
• Prioritizing and scheduling workload to ensure completion when faced with deadlines or emergencies.
• Establishing and maintaining effective working relationships with those contacted in the course of work, including City and other government officials, community groups, and the general public; and apply safe work practices.

LICENSE AND CERTIFICATION REQUIREMENTS:

Possession of a valid Class "C" California driver's license. 

PHYSICAL DEMANDS AND WORKING ENVIRONMENT:

Work is performed in an office environment in close proximity to other workers.  Incumbent shall be exposed to those conditions normally encountered in a business office environment.  Physical demands require frequent standing, reaching, leaning, twisting, grasping, lifting and sitting for prolonged periods of time.  Must carry moderately heavy boxes up to 50 pounds and/or utilize a dolly.  Incumbent must be able to drive safely to various City sites.  Incumbent must be able to see and hear in the normal range, with or without correction.  Incumbent must have the stamina to work long hours and overtime, if assigned, and be willing to work an irregular schedule, which might include evenings, weekends, holidays, and varying hours.

THE POSITION

Perform professional civil engineering work in the planning, design, technical investigation, and construction of projects in public works, transportation, capital improvements, and structural engineering. An example of duties include:

• Participates in the preparation of plans and specifications for the construction of streets, storm drains, street lighting, traffic signals, buildings and related public works and City building projects; researches project design requirements; performs calculations and prepares estimates of material costs and time considerations.
• Researches publications and industry information sources.
• Develops and revises design and construction standards.
• Participates in the implementation of the City’s traffic and transportation engineering programs; prepares and revises plans and specifications for traffic related projects; prepares special studies and reports and coordinates major projects.
• Investigates field problems affecting property owners, contractors, and maintenance operations.
• Prepares estimates and feasibility reports for new or modified services and structures.
• Administers contracts and may assist with inspection services and project management for construction and maintenance projects.
• Participates in the plan check, review and processing of plans for private developments affecting streets, sewers, drains and related public works facilities and ensures that they meet all City imposed requirements.
• Prepares special engineering studies and reports.
• Coordinates planning, design, and construction activities with other City departments, divisions, and sections, and with outside agencies.
• Attends various staff and regional technical advisory meetings.
• Provides technical and professional assistance/support to other City departments and divisions, Planning Commission, and City Council as necessary.
• Performs other related duties as assigned.

MINIMUM QUALIFICATIONS

Equivalent to a Bachelor’s degree with major coursework in civil engineering or a closely related field;

OR

Possession of a current Engineer-in-Training Certificate, issued by the California State Board of Registration for Professional Engineers, and one (1) year of professional civil engineering experience.

License Requirements:

A valid California Class C driver license or higher with a satisfactory driving record is required at the time of appointment. Individuals who do not meet this requirement due to a disability will be reviewed on a case-by-case basis.

The City of San José, the Capital of Silicon Valley, is one of the nation's best managed cities and one of the top ten cities in which to live, work, and do business. Moreover, San José is the center of cultural, government and economic activity for the region. The employees of the City of San José have embraced the following values: Integrity, Innovation, Excellence, Collaboration, Respect and Celebration. The City's Public Works Department is seeking an individual whose values align with the values of the City's employees.

The Department of Public Works is responsible for delivering capital improvement projects for a wide variety of City facilities and infrastructure, maintaining City facilities and fleet assets, facilitating and regulating development activities, and providing animal care and services. The Department is committed to high-quality service, partnering with the community, and providing an excellent environment in which to work.

The Department of Public Works is seeking to fill one (1) Sr. Facilities Repair Worker position at San Jose Central Service Yard . Under general supervision by the Building Management Administrator , the Sr. Facilities Repair Worker will perform a wide variety of semi-skilled work in the repair of buildings and equipment at the City 's six interim housing communities and future communities . More information about the City of Jose's interim housing program can be found on the City website and by clicking here .

The s alary range for this classification is $79,019.20 - $96,012.80 Annually.

This Sr. Facilities Repair Worker position will be stationed at Central Service Yard and travel to various sites across San Jose , with an emphasis on the City of San J ose's interim housing communities . In addition to the typical duties of a Sr. Facilities Repair Worker, the successful candidate will interact a n d compassionately communicate with interim housing tenants and pe ople in vulnerable housing situations . The position requires flexibility and adaptability to : respond to afterhours alarms , navigate exposure to situations and issues surrounding unhoused, and make decisions in stressful or ambiguous situations. The position may also oversee other Facility Repairs Workers in their day-to-day tasks and special projects. Other duties of this position include, but are not limited to:

• Leads, repairs, and maintains water faucets, urinal valves, commode valves, shower heads, minor pipe leaks, and various other water control valves.
• Leads and performs minor repair on buildings caused by vandalism and normal wear, including patching, full area painting and spot painting, floor tile repair and replacement, glass replacement, door adjustments, wall panel replacement, and wood trim replacement.
• Leads and performs minor repairs and maintains PTA C AC units .
• Leads, repairs, and maintains equipment, including generators and power tools.

• Schedules and manages contractor activities and reviews and approves payments.
• Prepares work orders for major repair and alterations and monitors progress and completion of projects.
• Prepares reports on materials, labor, and cost on damage caused by users in order to recover cost.
• Maintains records of repair equipment.
• Maintains records of work and projects in a work order system database.

This recruitment may be used to fill multiple positions in this, or other divisions or departments. If you are interested in employment in this classification, you should apply to ensure you are considered for additional opportunities that may utilize the applicants from this recruitment.