Search Jobs

The City currently has one (1) full-time vacancy for this position in the Public Works Department.

Applications will be reviewed at the following cutoffs: 

July 12, 2024

July 30, 2024

THE POSITION

Under general supervision, performs a wide variety of activities in the installation, inspection, maintenance and repair of irrigation systems and related equipment within City facilities; performs related work as required. An example of duties are:

• Performs daily inspection and preventive maintenance of the City’s irrigation systems; identifies any safety or repair issues.
• Installs, maintains and repairs irrigation systems; changes and adjusts sprinkler heads and maintains controllers; performs repairs on field irrigation computers, controllers, pumps, wiring, valves, pipes, and sprinklers.
• Monitors soil moisture and effectiveness of irrigation systems.
• Installs backflow devices; inspects and tests as necessary to ensure proper operation; certifies devices in compliance with regulatory requirements.
• Monitors and controls computerized irrigation systems.
• Works effectively with contractors on City-approved irrigation projects; seeks bids and/or estimates for proposed projects.
• Identifies, schedules, and supervises system repairs and installation of new irrigation systems; reviews plans and inspects installation of new irrigation systems; performs annual testing of systems.
• Performs Underground Service Alert (USA) markings as specified and according to accepted guidelines and requirements.
• Designs small irrigation systems.
• Plans and recommends materials needed for work projects; orders approved supplies and materials

MINIMUM QUALIFICATIONS

Any combination of training and experience which would provide the required knowledge, skills and abilities is qualifying. A typical way to obtain the required qualifications would be:

Equivalent to the completion of the twelfth (12th) grade

          AND

Two (2) years of responsible landscape/irrigation, public works or parks maintenance experience, including experience in design and/or maintenance of irrigation systems

License Requirements:

• A valid California Class C driver license or higher with a satisfactory driving record is required at the time of appointment. Individuals who do not meet this requirement due to a disability will be reviewed on a case-to-case basis.
• A Work Zone Traffic Control Safety Certificate issued by the International Municipal Signal Association (I.M.S.A.), or successful completion of the Traffic Control Technician-CA State Specific Training Course thru the American Traffic Safety Services Association is required within twelve (12) months of appointment.
• A certified Landscape Irrigation Auditor certificate is desirable.
• Possession of a Backflow Prevention Assembly Testers Certificate from either the American Water Works Association (AWWA), or the American Backflow Prevention Association (ABPA), or the Northern California Backflow Prevention Association (NCBPA), or equivalent is required within twelve (12) months of appointment.

We are seeking a dynamic and energetic individual to join the City of Live Oak as a Part-Time Recreation Leader. In this role, you will be responsible for planning, organizing, and leading recreational activities for community members of all ages. The ideal candidate will have a passion for promoting physical activity, creativity, and teamwork in a fun and safe environment.

Part-Time: Up to 20 hours a week 

Responsibilities:

• Plan and execute recreational programs and activities, such as sports, arts and crafts, games, and special events.
• Create engaging and inclusive environments that encourage participation and social interaction.
• Ensure the safety and well-being of all participants by adhering to established guidelines and protocols.
• Maintain equipment and supplies, and assist with facility setup and cleanup as needed.
• Communicate effectively with participants, parents, staff, and community members.
• Collaborate with team members to develop new program ideas and initiatives.

Apply Immediately- Open until a Maximum number of 25 applications received

Written Exam: TBD

Oral Exams: TBA

Resumes are not accepted in lieu of completing a City application. Incomplete applications will not be accepted.

This full time position is in Civil Service.

DEFINITION

Under general supervision, the Plant Operator II during an assigned shift is responsible for operation of the wastewater treatment plant and for maintaining a variety of machinery and equipment.

EXAMPLES OF DUTIES

Monitors the operation of the wastewater treatment plant; operates treatment facility equipment such as settling tanks, pumps, activated sludge process, digesters, centrifuge, chlorinators and valves to control flow and processing of wastewater sludge and effluent; monitors gauges, dials, meters and control panels, and other recording instruments, interpreting results to determine processing requirements, and records data; oils, greases, and cleans equipment; services and maintains a variety of plant equipment; extracts samples and performs laboratory tests and analysis; inspects plant equipment and facilities to locate and report needed repairs; performs general plant maintenance work, such as sweeping, cleaning, sanding, and painting; performs general grounds maintenance work; maintains routine and daily records and shift logs; assists in the training of other plant operators, makes operating decisions in the absence of supervisory personnel; may have to work under adverse conditions.

MINIMUM QUALIFICATIONS

Knowledge of: The operation and routine maintenance of mechanical equipment, including pumps and electrical motors; control procedures for wastewater treatment processes; tools, equipment and methods used in the overhaul, repair, adjustment and modification of stationary power equipment, and of the pumping, piping, and electrical systems used in the water quality control plant; sewage treatment processes and the laboratory tests used to check the effectiveness of such processes.

Ability to: Operate equipment used in a water quality control plant, make standard laboratory tests of sewage, receiving waters and sludge and interpret such tests; read and interpret gauges and recording devices reflecting plant operations; adjust treatment processes as indicated by plant conditions; perform mechanical repairs, maintenance work, and modification to equipment used in a water quality control plant; use various mechanic's tools with skill and accuracy; adapt to day, swing or graveyard work shift; follow oral and written directions; perform heavy manual labor involving lifting, carrying, kneeling, crawling and climbing; work in adverse conditions which require exposure to noise, noxious smells, gases, contact with wastewater, and risk of bodily injury; interact positively and cooperate with co-workers, respond politely to customers, work as a team member, function under demanding time pressure, respond in a positive manner to supervision, and attend work and perform duties on a regular and consistent basis.

Experience: Two years experience in water quality control plant operations. Specialized training may be substituted for 6 months experience.

Physical requirements: Moderate, and sometimes strenuous exertion required, including sustained walking, standing, bending, climbing, and lifting.

Education: Graduation from high school or equivalent.

License: Possession of a State Water Resources Control Board Grade II Operator's Certificate and possession of a valid Class C California Driver's License (including acceptable driving record).

Apply Immediately- Open until a Maximum number of 25 applications received

Written Exam: TBD

Oral Exams: TBA

Resumes are not accepted in lieu of completing a City application. Incomplete applications will not be accepted.

This full time position is in Civil Service.

DEFINITION

Under general supervision, operates and maintains equipment and facilities of the water quality control system, and performs other related work as required.

EXAMPLES OF DUTIES

Monitors the operation of the wastewater treatment plant; operates treatment facility equipment such as settling tanks, pumps, activated sludge process, digester, centrifuge chlorinators to control flow and processing of wastewater sludge and effluent; monitors gauges, dials, meters and controls panels, and other recording instruments, interpreting results to determine processing requirements, and records data; oils, greases and cleans equipment; services and maintains a variety of plant equipment; extracts samples and performs laboratory tests and analysis; inspects plant equipment and facilities to locate and report needed repairs; performs general plant maintenance work, such as sweeping, cleaning, sanding, and painting; performs general grounds maintenance work; maintains routine and daily records; may have to work under adverse conditions.

MINIMUM QUALIFICATIONS

Knowledge of: The operation and routine maintenance of mechanical equipment, including pumps and electric motors; control procedures for wastewater treatment processes; tools, equipment and methods used in the overhaul, repair, adjustment and modification of stationary power equipment, and of the pumping, piping, and electrical systems used in a water quality control plant; sewage treatment processes and the laboratory tests used to check the effectiveness of such processes.

Ability to: Operate equipment used in a water quality control plant; make standard laboratory tests of sewage, receiving waters and sludge and interpret such tests; read and interpret gauges and recording devices reflecting plant operations; adjust treatment processes as indicated by plant conditions; perform mechanical repairs, maintenance work, and modification to equipment used in a water quality control plant; use various mechanic's tools with skill and accuracy; adapt to day, swing or graveyard work shift; follow oral and written directions; perform heavy manual labor involving lifting, carrying, kneeling, crawling and climbing; work in adverse conditions which require exposure to noise, noxious smells, gases, contact with wastewater, and risk of bodily injury; interact positively and cooperate with co-workers, respond politely to customers, work as a team member, function under demanding time pressure, respond in a positive manner to supervision, and attend work and perform duties on a regular and consistent basis.

Experience: One year of experience in mechanical maintenance and/or water quality control plant operations.

Physical requirements: Moderate, and sometimes strenuous exertion required, including sustained walking, bending, climbing and lifting.

Education: Graduation from high school or equivalent.

License: Possession of a State Water Resources Control Board Grade I Operator's Certificate; possession of a valid Class C California Driver's License (including acceptable driving record).

The City of Foster City is recruiting for a part-time Public Works Maintenance Worker in the Public Works Department. The is a part-time non-benefited position working approximately 20 hours per week, and no benefits are provided. 

Important and Essential Responsibilities 
Operates hand and power tools, light and heavy construction equipment and specialized wastewater equipment. Handles and applies chemicals. Maintains, operates, inspects, repairs and installs water distribution system facilities including piping, storage tanks, meters, hydrants, valves, pressure reducing stations, pumping stations, pumps, controls, measuring devices, cathodic protection systems, communication systems, and related appurtenances.

Education and Training Guidelines: 
Any combination equivalent to experience and education that could likely provide the required knowledge, skills and abilities would be qualifying. A typical way would be:

Education: Completion of a job or technical training program in maintenance or construction; completion of high school or the equivalent. 

Experience: One year of experience in general maintenance or construction. 

Licenses, Certificates, Registration: 

• Possession of a valid California Class "C" Driver’s License and maintain license and a good driving record.

Selection Process
Applications will be reviewed for relevant education, experience, training and other job related qualifications. Based upon a review of employment applications received, a limited number of the qualified applicants will be invited to participate in the examination process. 

The process will consist of an Oral Panel Interview. An eligibility list will be established from those who pass the examination process with a score of 70% or higher. Current and future vacancies may be filled from this list. The list will remain in effect for at least one year unless exhausted sooner. 

The department will invite the most qualified candidates from the eligibility list to a final department interview. The Public Works department will make the hiring decision. 

Expected Dates for Examinations (subject to change): 
Oral Panel Interview: Week of July 8 (exact date TBD) 
Department Interview: July TBD 

Note: Meeting the minimum qualifications does not guarantee that a candidate will be invited to participate in the selection process. The City of Foster City reserves the right, at its discretion, to limit the number of qualified candidates invited to the selection process. 

Located in Middletown, CA!

The Mechanic Operator position consists of five levels of competency.  Individuals can either enter into the classification at the beginning level of the job or somewhere between the entry level and the top step depending on the qualifications brought with them.  It is the expectation of NCPA that all employees progress to the top level.  In order to progress to the top level an employee must complete all components in a competency level within the associated training matrix.  Employees who successfully complete a training level matrix and who received a rating of “meets requirements” or higher by their immediate supervisor will be promoted when qualified.  Upon completion/demonstration of competencies employees will be expected to perform work in all completed levels and other job-related duties as required. All employees have the right to challenge any component in the training matrix by proving proficiencies verbally and practically.

General Scope of the Job
Under general supervision of the Mechanical Maintenance Supervisor and at times under the general direction of the Mechanic Operator Lead Person; to maintain, repair, adjust, install, and test, powerplant steam field, water injection systems and equipment and maintain lease site grounds.  The measure of accuracy and reliability is the safe, effective and efficient performance of the Facilities.  This position is predominately mechanic based with operation support as outlined below.

Description of Duties and Responsibilities
Level III:
This level of the Mechanic Operator position requires the completion of all Level III training requirements. The employee must perform the duties as described below and as defined in lower levels while attaining Level IV skills and experience through academic and hands-on training. Level III knowledge and skills focus on journey level mechanical duties and responsibilities.
•    Inspects, tests, calibrates, installs, rebuilds, adjusts, repairs and aligns all mechanical equipment such as hydraulic control systems, turbines, generators, cooling tower, pumps, electric motors, valves, gear reducers, compressors, blowers heat exchangers, HVAC systems excluding refrigerant replacement, fire protection systems, diesel and gas engines, mufflers, separators, traps, rock catchers, tanks, pipeline and pipe supports.
•    Maintains facility structures. 
•    Performs basic inspections and repairs various rigging equipment, fixtures and cranes.
•    Assists the scaffolding qualified journeyman in maintaining, and repairing scaffolding. 
•    Inspects and maintains safety devices such as harnesses and rescue equipment.
•    Works with Safety Manager to maintain records of regulated equipment.
•    Keeps accurate records of equipment history, reports and work orders on computer for CMMS.  Works with CMMS personnel for accuracy and reliability.
•    Performs preventative maintenance and assessments on various plant equipment.
•    Writes Work/Operating Procedures within area of expertise.
•    Requisitions replacement parts and supplies to carry out assigned tasks.
•    Makes working drawings of components and changes made to Plant systems relative to area of expertise.
•    Installs, inspects, tests, repairs, rebuilds, and maintains equipment such as portable and fixed site pumps, valves, mufflers, separators, traps, rock catchers, turbines, generators, motors, gear reducers, compressors and hydraulic control systems, pipelines, tanks, pipeline supports, effluent piping components.
•    Maintains lease site grounds structures, culverts, roads, drains and ditches.
•    Examines and diagnoses malfunctions or defective equipment on pumps, motors, valves, separators, vents, air vacuum breakers and compressors; disassembles/reassembles, overhauls and adjusts defective equipment
•    Installs, fits and calibrates equipment replacement parts.  Observes equipment operation.  Adjusts equipment to operational specifications using specialized tools and precision measuring instruments.
•    Disassembles, removes, repairs, replaces, assembles and aligns pipes, pipeline components, and valves repairing or replacing broken and worn parts using various hand tools.
•    Observes and directs contractors while digging trenches, cleaning tanks and maintaining lease site grounds.
•    Under the direction and training of operations, assists with clearances on steam field and effluent pipeline equipment for maintenance purposes.
•    Will be trained to Rig and lift equipment to install, repair or replace equipment.
•    Instructs and trains workers in repair and maintenance procedures of steam field, power plant and effluent pipeline equipment.
•    Maintains inventory of tools and materials for the maintenance work at the steam field and effluent pipeline.
•    Maintains steam field equipment records on work completed on CMMS or equivalent maintenance program.
•    Assists other classifications when needed.
•    Performs other job-related duties as required.
•    Acquire OSHA certified training to meet business needs.
•    Trains and advises other workers in the maintenance and operation of steam field and effluent pipeline equipment.
•    Maintains and repairs Hydraulic Control Systems.

Level IV:
This level of the Mechanic Operator position requires the completion of all Level IV training requirements for operational duties and responsibilities.  The employee must perform the duties as described below and as defined in lower levels while attaining Level V skills and experience through academic and hands-on training.
•    Reviews, coordinates and reports work orders, work activities and equipment clearances with appropriate personnel.  
•    Checks equipment to be cleared in advance to guarantee its condition to others.  Informs Operator Technician Lead Person and Supervisors of the status of equipment and systems.  
•    Under direction of the Operator Technician Lead Person or a designee, operates various equipment and performs basic equipment clearances on low voltages (<600 volt) electrical breakers, steam line equipment and effluent equipment.  
•    Terminates and connects motor wiring to facilitate bearing repairs (less than 600 volts.).
•    Conducts online test of equipment before certifying its status and performance.

Machinist Duties and Responsibilities
•     Sets up and operates machine tools to repair or reproduce equipment parts and fittings working from blueprints or defective parts using precision tools and measuring instruments.
•    Fabricates special tools, rigging equipment and replacement parts to repair equipment.   
•    Fabricates, modifies, shapes and repairs equipment parts using a variety of metal working machines.
•    Chips, grinds, bores, and drills equipment parts.
•    Verifies conformance of finished work piece to specifications, using precision measuring instruments.
•    Calibrates, fits and assembles equipment parts according to drawings and specifications using machine tools, power tools, and measuring instruments.
•    Installs machined replacement parts; starts and observes equipment operation to detect malfunctions or out-of-tolerance performance, adjusts as necessary.
•    Maintains shop equipment and tools.
•    Maintains inventory of machining tools.

Representative Physical and Job Demands
•    Regularly talks and listens to others to exchange and obtain information to direct the operation and maintenance of Geothermal Facility steam field and effluent equipment.
•    Regularly reaches, grasps, pushes and pulls various wrenches, hand tools, and other objects using manual dexterity and eye hand coordination to operate and maintain equipment.
•    Regularly climb ladders and walks on platforms near high temperature surfaces; works on slippery or uneven surfaces in precarious places.
•    Frequently walks, reaches, kneels and crouches using feet, legs, hands and manual strength to access and operate plant equipment.
•    Occasionally lifts and moves pumps motors and pipe weighing up to 50 pounds.
•    Routinely works near heated surfaces; works on slippery or uneven surfaces in precarious places to adjust or operate equipment.
•    Occasionally exposed to high voltage and other electrical hazards while working on equipment.
•    Routinely works in outside weather conditions and is exposed to chemicals, wet and humid conditions, extreme cold and heat while inspecting and maintaining equipment.  The noise level is frequently very loud.
•    Routinely listens to operating sounds of equipment to diagnosis equipment malfunctions.
•    Frequently operates forklifts cranes, air compressors, sandblasters and power tools to maintain and repair equipment.
•    Frequently operates Agency vehicles going to and from job locations.

Job Expectations
Acquisition and Use of Technical Knowledge
•    Possesses or acquires as needed the ability to detect, diagnose disassemble and repair steam and water equipment with a fundamental knowledge of; turbine equipment, and auxiliary systems and their capabilities; operation processes, mechanical and electrical theory and background to operate equipment; measuring devices and hand tools for maintenance work; general contamination and control practices and procedures; basic math, geothermal powerplant rules and regulations; clearance procedures, physics including pump mechanics; basic principles of thermodynamics and fluid flow.  Given this basic knowledge, understands own role within the plant and how that role requires the use of knowledge applied to practical, day to day, operations and maintenance demands.  Hold self-accountable to acquire knowledge that may be needed when a job situation changes, new tasks are introduced to the job, or when improved performance requires acquiring extended or specialized information.
•    Possesses or acquires as needed an extensive knowledge of safety, fire, and security rules and procedures.  Given the emphasis of safety at the plant, uses knowledge to improve plant conditions and the organization’s safety record.
•    Acquires knowledge of operations and maintenance procedures on a continuing basis to stay current as a significant contributor to plant solutions, safety performance, and operations and maintenance improvements.
•    Confers with Operator Technician Lead Person or Operations Supervisor to resolve system problems and offers a variety of workable solutions to complex problems and report status of systems and equipment.  
•    Identifies problems or trends with systems and equipment early to prevent operator or electrical errors. 
•    Passes knowledge on to other employees as a way to contribute to the performance of others, or get a job done.
•    Assesses own limitations with the fundamental knowledge needed to perform in the job.

Application of Technical and General Job Skills
Technical and job skills are indicated by demonstrating an ability to:
•    Efficiently and effectively operate, control, and maintain equipment, and be accountable for aspects of the job at the Geothermal Facility. 
•    Implement or use existing methods to control the waste of time, money and material resources, such as:
o    Acting to improve work procedures 
o    Conserving resources 
o    Expediting a job
o    Completing a work assignment efficiently
o    Completing long term work in an orderly fashion
•    Work with management to identify and learn from mistakes made and apply what is learned to future situations or plant conditions.
•    Establish and maintain effective work relationships with those contacted in the performance of required duties.
•    Review own action to determine the cause of poor working relationships so those relationships can be improved
•    May be required to work extended hours and on normal days off.
•    Operate Agency vehicles and equipment safely.

Training and Experience Requirements
Level III: Completion of the NCPA Level III training program or three years of equivalent journey-level mechanical experience.
Level IV: Completion of the NCPA Level IV training program or three years of equivalent journey-level mechanical experience and operations experience.

Driver’s License Requirement
Possession of an unrestricted Class C California operator’s license issued by the State of California, Department of Motor Vehicles.  Possession and maintenance of a good driving record as demonstrated by the absence of multiple or serious traffic violations or accidents within the last three (3) years.

Desired Qualifications 
•    Possession, or ability to obtain with training, a Class A California operator’s license issued by the State of California Department of motor Vehicles.
•    Ability to set up and operates machine tools to repair or reproduce equipment parts and fittings working from blueprints or defective parts using precision tools and measuring instruments.
•    Ability to Fabricate special tools, rigging equipment and replacement parts to repair equipment.   
•    Ability to Fabricate, modifies, shapes and repairs equipment parts using a variety of metal working machines.
•    Chips, grinds, bores, and drills equipment parts.
•    Verifies conformance of finished work piece to specifications, using precision measuring instruments.
•    Calibrates, fits and assembles equipment parts according to drawings and specifications using machine tools, power tools, and measuring instruments.
•    Installs machined replacement parts; starts and observes equipment operation to detect malfunctions or out-of-tolerance performance, adjusts as necessary.

EOE

The City of Woodland Community Services Department

invites your application for:

RECREATION COORDINATOR

WOODLAND SENIOR CENTER

$21.65 to $27.63 per hour

(Part-Time, Averages 20 Hours Per Week, not to exceed 960 hours in a fiscal year)

Open on May 22, 2024

 Closes on June 30, 2024 at 4:00 PM

DEFINITION:

To assist in implementing, coordinating, and evaluating recreation and programs and events, including but not limited to Teen Programs, Youth Programs, After School Programs, Aquatic Programs and events, promotional events, special events and excursions.

Ideal Candidate

The ideal candidate is someone who:

• Experience scheduling, organizing, assigns, and monitors program volunteers.
• Is able to creates publications and flyers using Microsoft Office or web-based solutions like Canva.
• Is familiar and able to creates promotional materials, including press releases and social media posts.
• Experience in planning, coordinating, and directing events, programs, and activities.
• Able to work with others and create relationships with partner non-profit organization.
• Experience collecting data and creating reports from all senior programs.

EXAMPLES OF DUTIES

The following are typical illustrations of duties encompassed by the job class; not an all-inclusive or limiting list:

ESSENTIAL JOB FUNCTIONS

Implement, coordinate, and evaluate recreation programs, aquatics programs, special recreation events and services; publicize programs, events and services. Train, schedule and assign program staff and volunteers; assist in the development of staff evaluations. Assist with coordination and scheduling of the recreation or aquatics programs.  Promote and maintain safety in the work place. Maintain records and statistical data on programs. Issue, secure and maintain program equipment and supplies.  Regular, predictable, consistent and timely attendance is an essential function of the position, in that Employee must be present to work to complete assigned tasks.

OTHER JOB FUNCTIONS

Enforce all rules and regulations. Teach aquatic programs as assigned. Work cooperatively with others. Perform related duties as assigned.

QUALIFICATIONS

Knowledge of:

Community resources adaptable to the development of community services programs for specified recreation programs.  Principles of program coordination, training and evaluations.  Emergency procedures, First Aid and CPR.  Safety principles, practices and procedures.

Skill to:

Apply First Aid methods and safety precautions related to assigned programs.  Develop and maintain support for programs from the community and local organizations.  Communicate clearly and concisely, both orally and in writing.  Oversee train and evaluate assigned staff.  Establish and maintain effective work relationships with those contacted in the performance of the required duties.  Operate office equipment, including a personal computer.

Ability to:

Develop cooperative public relations with the general public.  Remain calm in stressful situations.  Be consistent when enforcing rules and regulations.  Maintain authority and control over programs.

Minimum Education and Experience:

Education:

High School diploma or equivalent.  Bachelor's Degree from an accredited college or university with major course work in recreation or a related field is preferred.

Experience:

Two (2) year of increasing responsible experience in the delivery of recreation services. A Bachelor’s Degree may be substituted for one year of experience.

License or Certificates:

When only assigned to recreation duties, the following is required and must be maintained during the course of employment.

• Required upon hire:
  •  Valid California Driver’s license,
• Required within six months of hire,
  • Possession and maintenance of a current American Red Cross First Aid Certificate or equivalent and
  • Current American Red Cross Community CPR Certificate or equivalent

APPLICATION PROCESS FOR THIS POSITION

The City of Woodland's Community Services Department is accepting applications for employment.  The filing deadline is June 14, 2024.  Applications will be screened and qualified applicants will be invited to participate in an interview.

LIMITED POSITIONS AVAILABLE.

Apply to City of Woodland Community Services Department, 2001 East Street, Woodland, CA 95776 by 4:00 pm according to the date specified above. Download an application here. Interviews will be held on Thursday June 20, 2024.

All of these positions are temporary part time. Temporary employees work no more than 960 hours in a Fiscal Year.

The pay cycle is biweekly.  With the exception of worker's compensation coverage and sick leave, no other benefits compensations are provided.  Employees must contribute 1.45% of salary to Medicare and 7.5% to a retirement plan in accordance with Federal Law.

THE ABILITY TO SPEAK AND UNDERSTAND SPANISH IS A

DESIRABLE QUALIFICATION FOR ALL POSITIONS.

The City of Woodland hires only citizens and individuals lawfully
authorized to work in the United States.

The City of Woodland is an equal opportunity employer.

The Application Programmer performs or assists in the design, documentation, coding, testing, and implementation of new application programs or enhancements to existing application programs consistent with the Software Development Life Cycle (SDLC) best practices and applicable computer programming standards and frameworks. The position is primarily responsible for the suite of Bid-to-Bill applications as well as other business applications in use by the Agency. The position will work with other developer staff and supervisor during probationary status to learn and develop proficiency in the use of the Agency's software development frameworks, processes, and documentation design standards.

ESSENTIAL DUTIES AND RESPONSIBILITIES
This position requires that the incumbent reports for work on time and maintains satisfactory attendance in accordance with Agency policy; Ensures work responsibilities are covered when absent; Arrives to meetings and appointments on time; Performs special assignments as assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Level I: 
This classification is an entry-level position that is not expected to perform with the same level of independence of direction and judgment as higher levels. The level I works closely with other senior-level CTAs and is often given direction to complete tasks, install and troubleshoot hardware and software, perform system upgrades, evaluate and apply patches to systems, work closely with customers, and provide application support through help desk requests, and creates and maintains documentation.

Level II: 
This classification requires having all Level I duties and responsibilities with a minimum of two years of experience in software application development. Level II receives occasional direction and guidance from other senior-level CTAs; otherwise, uses developed experience and professional judgment to successfully complete projects in accordance with defined requirements and established timelines.

Responsibilities:
•    Within a specific hardware and operating system environment, work to define and design the operating features of new programs or enhancements
•    Produce appropriate conceptual-level application documentation for review and approval by the supervisor
•    Produce appropriate programming documentation for the review of the Supervisor, with sufficient detail on which to base programming activities
•    Develop computer programs in accordance with design documentation, closely following coding standards and conventions used within NCPA
•    Test applications using prescribed test methodology and tools
•    Develop an implementation plan, prepare production rollout for approval by the supervisor, and coordinate with the Ops team to execute the rollout
•    Maintain and enhance software applications
•    Conduct independent communications with user departments in a cooperative and professional manner
•    Provide emergency system support outside normal working hours as needed, on a rotational basis with other department employees
•    Travel to NCPA remote field sites to provide support to remote users as needed 
•    Assist in the evaluation of proposed new or modified computer system hardware and software

MINIMUM QUALIFICATIONS

Level I:
Education and/or Experience      
Bachelor's degree in Computer Science, Management Information Systems, Computer Engineering, or related field from an accredited four-year college or university and at least six months of related programming experience and training.

Level II:
Education and/or Experience      
Bachelor’s degree in Computer Science, Management Information Systems, Computer Engineering or related field from an accredited four-year college or university and at least two years of related programming experience and training. A minimum of two years in design and programming experience including some experience programming interactive programs. Experience must include exposure to systems analysis techniques.

KNOWLEDGE AND ABILITIES 
Knowledge:
Knowledge of VB.Net and/or C# as core programming language is essential; Integrated development environment (IDE) such as Microsoft Visual Studio; Source control management tools such as Team Foundation Server (TFS) and Git; JavaScript, HTML5, and Cascading Style Sheets (CSS) for developing web pages is highly desired; Oracle PL/SQL, SQL-Server T-SQL or similar SQL experience and understanding of relational database principles. Knowledge of software testing methodologies and tools, computer equipment and capabilities, data communications and local area networking, and client-server software is essential; Principles and programming techniques used to implement online interactive applications, technical report writing, systems analysis techniques, database management concepts, and management information system concepts; DevOps and related best practices; and knowledge of the Component-based Scalable Logical Architecture (CSLA) is an advantage.

Abilities:
Ability to write moderately complex programs and develop detailed program specifications; Demonstrate an understanding of MVC (Model-View-Controller; Stay up to date with related software development technologies through training, product research, and participating in conferences and user groups. Ability to work effectively with a broad, diverse cross-section of peers and various individual personalities; listen effectively, communicate with, and maintain a professional working relationship with co-workers; communicate clearly, efficiently, and professionally both over the phone and in person; Maintain strong organizational skills; and the ability to complete quality and timely work with minimal supervision.

SPECIAL REQUIREMENTS

Valid California Driver's License and insurance. 

This job has no supervisory responsibilities.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this Job, the employee is regularly required to sit and view and operate a computer, use hands to finger, handle, or feel, reach with hands and arms, and talk or hear. Requires manual finger dexterity and eye-hand coordination to operate and adjust office equipment such as computers. The employee is occasionally required to stand and walk. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, color vision, and the ability to adjust focus.

The noise level in the work environment is usually quiet.

All employees are responsible for contributing to an inclusive, safe, and secure work environment that values diverse cultures, perspectives, and experiences and is free from discrimination.

MAINTENANCE WORKER (Full time)

The City of Marysville seeks qualified candidates for this excellent career opportunity!

Working in the Public Works Department, the Maintenance Worker I/II will perform a variety of unskilled, semiskilled and skilled light and heavy duty construction, maintenance and repair work involving public works, sewer and drainage systems, buildings, parking meters, and other facilities.

The position will be filled as a Maintenance Worker I/II based on the experience and qualifications of the candidate.

SALARY RANGE:
Maintenance Worker I/II – $3,350.50 to $4,485.52 per month (wages effective 7/1/2024 per MOU).  
 

FINAL FILING DATE:
A complete application packet must be completed online by 11:59 pm, Monday, June 24, 2024.

DISTINGUISHING CHARACTERISTICS:

Maintenance Worker I:  This is the entry level class in the maintenance worker series. Positions in this class normally perform a variety of unskilled and semi‑skilled maintenance tasks. Although trucks and other motorized equipment may be operated by a Maintenance Worker I, the equipment is used on a training basis or for tasks which are repetitious in nature. Under this training concept, positions assigned to the class of Maintenance Worker II which become vacant may reasonably be filled at the Maintenance Worker I level, with the understanding that reassignment to the Maintenance Worker II class may be expected following successful job performance and personal development.

Maintenance Worker II: This is the journey level in the maintenance worker series. Positions assigned to this class are expected to perform semi‑skilled and skilled public works maintenance activities and to operate light and moderately heavy power‑driven equipment on a continuing basis. All positions allocated to this class require that an incumbent be able to work independently, exercising judgment and initiative to fulfill assigned tasks. Maintenance Workers II may also be expected to assist in the supervision and training of less experienced personnel.

EXAMPLES OF ESSENTIAL DUTIES

Examples of Work are not intended to be an exhaustive list of all responsibilities, duties and skills. They are intended to be accurate summaries of what the job classification involves and what is required to perform it. Employees are responsible for all other duties as assigned.

• Perform a variety of maintenance work in the construction, maintenance and repair of streets, parks, sewers, storm drains, curbs, gutters, sidewalks, parking meters and other public facilities.
• Operate power‑driven equipment such as skip loaders, dump trucks, water trucks and fork lifts.
• Break out old concrete work such as curbs, sidewalks, and gutters.
• Cut and prepare streets for patches, spread premix and oil, and rake asphalt.
• Replace, repair, couple, test, and backfill sewer lines.
• Clean and maintain basic tools used on the job.
• Paint traffic directional markings, such as crosswalks and safety loading zones.
• Fabricate, install, repair and replace street signs.
• Operate heavy power‑driven equipment on a relief or training basis.
• Water, mow, weed, trim, renovate, and fertilize grass and other landscaped areas.
• Rake leaves, clean walks, fields, courts, and other facilities.
• Spade and otherwise prepare ground around plants and shrubs, including mixing and applying fertilizers.
• Plant, trim and/or remove trees, flowers, and shrubs. 
• Load trimmings on trucks for disposal.
• Pick up rubbish and litter materials and perform general grounds cleaning.
• Operate power mowers, edgers, sewer rodders, and other hand-operated and power tools in the performance of maintenance and repair activities.
• Drive vehicles as required and assist in routine care and upkeep of such vehicles.
• Assist in moving and installing park and recreational equipment.
• Install, maintain, and repair sewer system mains, sprinkler systems, pipes and facilities.
• Inspect, maintain, and repair parking meter devices.

QUALIFICATION REQUIREMENTS

To be successful in these positions, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skills, and/or abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EMPLOYMENT STANDARDS (position requirements at entry and throughout employment)

Any combination of education, training, and experience which provides the required knowledge, skills, and abilities to perform the job is qualifying. These employment standards would typically be achieved by possession of a high school diploma, or equivalent, and:

Maintenance Worker I: Possession of a valid California Class C driver license.  There is an employee weight limitation of 325 pounds to meet the legal limits for the safe use of certain equipment.

Maintenance Worker II: One year full-time performing the duties and activities expected of incumbents in the Maintenance Worker I classification. Possession of a valid California Class C driver license.  There is an employee weight limitation of 325 pounds to meet the legal limits for the safe use of certain equipment.

PHYSICAL DEMANDS

The physical demands described here are representative of those which must be met by an employee to successfully perform the essential functions of this job. Reasonable accom­modations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is regularly required to sit, walk, stand, stoop, climb, dig, lift up to 50 pounds and push motorized equipment.

Specific vision abilities required by this job include close vision and the ability to adjust focus.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing essential functions of this job. Reasonable accom­modations may be made to enable individuals with disabilities to perform the essential functions.

The noise level in the work environment is usually moderately quiet indoors, and varying outdoors.

Work is performed in all sorts of weather, including inclement weather and temperatures above 100 degrees Fahrenheit.

The City of Menlo Park is a great place to work! We are now accepting applications for Recreation Coordinators. This is an unparalleled opportunity to join our energetic and creative team. Interested and qualified candidates should apply now.

Recreation Coordinators are hands-on team leaders responsible for a wide range of programming, operational, and administrative duties, including: program implementation, facility operations, customer service, systems management, marketing and promotion, and special projects as needed and assigned. Assigned areas of program responsibility may include one or more of the following: recreation center operations, childcare, youth and adult sports, aquatics, and/or systems management.

The City of Menlo Park currently has two (2) full-time Recreation Coordinator positions available immediately with focus area in recreation center operations, programs and systems. This full-time team lead position offers interesting and rewarding work experience, a competitive benefits package, and potential advancement opportunities for highly skilled applicants who are committed to continuous improvement and professional excellence.

In addition to the current opportunity, this recruitment will be used to establish the eligibility list for Recreation Coordinator to fill anticipated future openings in other divisions, such as afterschool programs. Interested candidates should apply now to be considered for current and future openings in this classification.

About the Department 

The Library and Community Services department is responsible for providing excellent customer service through recreational, educational, and cultural programs for children, adults and seniors. Our facilities include 221 acres of parkland distributed among 13 parks, two libraries, two community centers, two public pools, three childcare centers, two gymnasiums, and one gymnastics center. Included in the parks and recreation areas are tennis and pickleball courts, dog parks, softball diamonds, picnic areas, playgrounds, soccer fields, a skate park, shared use of a performing arts center and open space.  The City of Menlo Park opened a state-of-the-art new facility that incorporates a community center, gymnasium, aquatics center, senior center, youth center, and branch library in May 2024.