Search Jobs

TO VIEW JOB ANNOUNCEMENT, CLICK JOB PDF OR JOB ANNOUNCEMENT URL BELOW.

The City of Lincoln is hiring for the position of Maintenance Worker I/II within the Streets Division of the Public Works Department.  Under general supervision, this position performs the full array of duties assigned to classes in the Maintenance Worker series including maintenance, construction and equipment operation work in one or more Public Works divisions; occasionally assists in the training of lower-level Maintenance Workers; and performs other related duties as required.

Maintenance Worker I

The Maintenance Worker I is the entry level class responsible for a wide variety of maintenance and construction tasks. This classification is alternatively staffed with Maintenance Worker II and incumbents may advance to the higher-level after gaining experience and demonstrating a level of proficiency that meets the qualifications of the higher-level class.

Maintenance Worker II

The Maintenance Worker II is the journey level class responsible for a wide variety of maintenance and construction tasks. This classification is distinguished from the next higher classification of Senior Maintenance Worker in that the latter performance the more complex assignments and lead responsibilities.

SUPERVISION RECEIVED/EXERCISED

The Maintenance Worker I receives general supervision from a Public Works Supervisor.  Incumbents of this class do not routinely exercise supervision.  The Maintenance Worker II receives general supervision from a Public Works Supervisor. May exercise technical and functional supervision over assigned staff. 

ESSENTIAL FUNCTIONS

Include but are not limited to the following:

• Performs maintenance, repair, construction, equipment operation and installation work in streets, water, sewers, refuse collection, parks and buildings.
• Streets: Breaks, removes, crack seals, hydropatches, and repairs surfaces; digs, shovels, hauls, loads and unloads materials; operates jack hammers, tampers, pavement breakers and other hand and power tools; rolls and irons asphalt; operates trucks, backhoes, rollers, pavers, street sweepers and other construction vehicles and equipment; assists in the installation and maintenance of City signs, road markings, striping and delineators; paints street lines and crosswalks; performs concrete sidewalk, curb, gutter and ramp installation and repair; installs, maintains and repairs street lights; installs shoring and trench plates; monitors underground service alert (USA’s) and marks when necessary; conducts street leaf pickup; mows roadsides.
• Water Distribution and Drainage: Constructs, maintains and repairs storm conduits, curbs, gutters and drainage facilities; installs, repairs and maintains water mains and lines; conducts maintenance at well sites; monitors pump stations; operates jack hammers and other tools and equipment; inspects tools and equipment for safety and mechanical defects; installs and repairs water service connections, meters and boxes; performs monthly meter reads; repairs, installs and tests hydrants; monitors USA’s and marks when necessary; operates trucks and other construction vehicles and equipment; locates and repairs leaks in water lines; cleans storm drains, flood control facilities and inlets; operates sewer camera and hydrovac.
• Parks and Buildings: Maintains lawns, shrubs, and trees; assists in spraying of herbicides and pesticides; cuts, sprays and removes weeds; clears brush and debris; assists with planting and maintenance of landscaped areas; installs, maintains, repairs and programs irrigation systems; cleans and maintains parks and city buildings; assists in the performance of minor carpentry, plumbing, electrical, painting and remodeling tasks.
• Solid Waste: Operates a variety of collection vehicles and equipment including front, rear and side loaders in the collection and transportation of residential and commercial refuse; drives to landfill site when vehicle is full and unloads material; evaluates and updates assigned routes; cleans, maintains and inspects assigned vehicles; maintains daily logs.
• Fills out reports and work orders; climbs or uses hydraulic aerial devices to top, trim, reshape, strip, treat and remove trees; operates airport fueling vehicles; responds to after-hours call-outs if assigned.
• Demonstrates a full understanding of applicable policies, procedures and work methods associated with assigned duties; may provide training to lower-level staff; responds to questions and concerns from the general public; provides information as is appropriate and resolves public service complaints.
• Responds to questions and concerns from the general public; provides information as is appropriate and resolves public service complaints.
• Establishes positive working relationships with representatives of community organizations, state/local agencies, City management and staff, and the public.

PHYSICAL, MENTAL AND ENVIRONMENTAL WORKING CONDITIONS

Position requires sitting, standing, walking on level and slippery surfaces, reaching, twisting, turning, kneeling, bending, stooping, squatting, crouching, grasping and making repetitive hand movement in the performance of daily duties. The position also requires both near and far vision when inspecting work and operating assigned equipment. The need to lift, carry and push tools, equipment and supplies weighing 25 pounds or more is also required. Additionally, the incumbent in this outdoor position works in all weather conditions including wet, hot and cold. The incumbent may use cleaning and lubricating chemicals, pesticides or herbicides which may expose the employee to fumes, dust and air contaminants. The nature of the work also requires the incumbent to climb ladders, use power and noise producing tools and equipment, operate hydraulic aerial devices, drive motorized vehicles and heavy equipment, work in heavy vehicle traffic conditions and often work with constant interruptions.

KNOWLEDGE/SKILLS/ABILITIES

The following are a representative sample of the KSA’s necessary to perform essential duties of the position:

Knowledge of: Practices, techniques and materials used in maintenance, construction and repair of streets, buildings, parks and water treatment facilities; knowledge of the City street system; applicable federal, state and local laws, codes and regulations; operating characteristics and safety requirements for operation of trucks, refuse vehicles and other heavy and light equipment; defensive driving; proper lifting procedures; methods and techniques for record keeping; basic principles of mathematics; occupational hazards and standard safety procedures.

Skill to: Safely and effectively operate a variety of maintenance equipment, tools and materials.

Ability to: Perform maintenance, repair and installation of asphalt, signs, concrete, water mains and storm drains; drive and operate trucks and heavy construction equipment; respond to issues and concerns from the community; interpret, explain and apply applicable laws, codes and regulations; operate a variety of construction equipment, vehicles and power and hand tools; perform heavy manual labor for extended periods of time; work at substantial heights; respond to after-hours call-outs if assigned; organize, prioritize and follow-up on work assignments; work independently and as part of a team; make sound decisions within established guidelines; analyze a complex issue, and develop and implement an appropriate response; follow written and oral directions; observe safety principles and work in a safe manner; communicate clearly and concisely, both orally and in writing; establish and maintain effective working relationships.

THE SELECTION PROCESS

The process may include an in-basket exercise, individual interviews, panel interviews and/or other related components.  Only those candidates who have the best combination of qualifications in relation to the requirements and duties of the position will continue in the selection process. Meeting the minimum qualifications does not guarantee an invitation to the process. The candidate selected for the position will be required to complete a background check including reference checks, fingerprint check, medical/drug-test evaluation and/or other related components.

Human Resources will make reasonable efforts in the examination process to accommodate persons with disabilities.  Please advise HR of any special needs a minimum of five days in advance of the selection process exam by calling (916) 434-3229. The City of Lincoln is an Equal Opportunity Employer.

The information contained herein is subject to change and does not constitute either an expressed or implied contract.

Apply Immediately- Open until a Maximum number of 25 applications received

Written Exam: TBD

Oral Exams: TBA

Resumes are not accepted in lieu of completing a City application. Incomplete applications will not be accepted.

This full time position is in Civil Service.

DEFINITION

Under general supervision, the Plant Operator II during an assigned shift is responsible for operation of the wastewater treatment plant and for maintaining a variety of machinery and equipment.

EXAMPLES OF DUTIES

Monitors the operation of the wastewater treatment plant; operates treatment facility equipment such as settling tanks, pumps, activated sludge process, digesters, centrifuge, chlorinators and valves to control flow and processing of wastewater sludge and effluent; monitors gauges, dials, meters and control panels, and other recording instruments, interpreting results to determine processing requirements, and records data; oils, greases, and cleans equipment; services and maintains a variety of plant equipment; extracts samples and performs laboratory tests and analysis; inspects plant equipment and facilities to locate and report needed repairs; performs general plant maintenance work, such as sweeping, cleaning, sanding, and painting; performs general grounds maintenance work; maintains routine and daily records and shift logs; assists in the training of other plant operators, makes operating decisions in the absence of supervisory personnel; may have to work under adverse conditions.

MINIMUM QUALIFICATIONS

Knowledge of: The operation and routine maintenance of mechanical equipment, including pumps and electrical motors; control procedures for wastewater treatment processes; tools, equipment and methods used in the overhaul, repair, adjustment and modification of stationary power equipment, and of the pumping, piping, and electrical systems used in the water quality control plant; sewage treatment processes and the laboratory tests used to check the effectiveness of such processes.

Ability to: Operate equipment used in a water quality control plant, make standard laboratory tests of sewage, receiving waters and sludge and interpret such tests; read and interpret gauges and recording devices reflecting plant operations; adjust treatment processes as indicated by plant conditions; perform mechanical repairs, maintenance work, and modification to equipment used in a water quality control plant; use various mechanic's tools with skill and accuracy; adapt to day, swing or graveyard work shift; follow oral and written directions; perform heavy manual labor involving lifting, carrying, kneeling, crawling and climbing; work in adverse conditions which require exposure to noise, noxious smells, gases, contact with wastewater, and risk of bodily injury; interact positively and cooperate with co-workers, respond politely to customers, work as a team member, function under demanding time pressure, respond in a positive manner to supervision, and attend work and perform duties on a regular and consistent basis.

Experience: Two years experience in water quality control plant operations. Specialized training may be substituted for 6 months experience.

Physical requirements: Moderate, and sometimes strenuous exertion required, including sustained walking, standing, bending, climbing, and lifting.

Education: Graduation from high school or equivalent.

License: Possession of a State Water Resources Control Board Grade II Operator's Certificate and possession of a valid Class C California Driver's License (including acceptable driving record).

Apply Immediately- Open until a Maximum number of 25 applications received

Written Exam: TBD

Oral Exams: TBA

Resumes are not accepted in lieu of completing a City application. Incomplete applications will not be accepted.

This full time position is in Civil Service.

DEFINITION

Under general supervision, operates and maintains equipment and facilities of the water quality control system, and performs other related work as required.

EXAMPLES OF DUTIES

Monitors the operation of the wastewater treatment plant; operates treatment facility equipment such as settling tanks, pumps, activated sludge process, digester, centrifuge chlorinators to control flow and processing of wastewater sludge and effluent; monitors gauges, dials, meters and controls panels, and other recording instruments, interpreting results to determine processing requirements, and records data; oils, greases and cleans equipment; services and maintains a variety of plant equipment; extracts samples and performs laboratory tests and analysis; inspects plant equipment and facilities to locate and report needed repairs; performs general plant maintenance work, such as sweeping, cleaning, sanding, and painting; performs general grounds maintenance work; maintains routine and daily records; may have to work under adverse conditions.

MINIMUM QUALIFICATIONS

Knowledge of: The operation and routine maintenance of mechanical equipment, including pumps and electric motors; control procedures for wastewater treatment processes; tools, equipment and methods used in the overhaul, repair, adjustment and modification of stationary power equipment, and of the pumping, piping, and electrical systems used in a water quality control plant; sewage treatment processes and the laboratory tests used to check the effectiveness of such processes.

Ability to: Operate equipment used in a water quality control plant; make standard laboratory tests of sewage, receiving waters and sludge and interpret such tests; read and interpret gauges and recording devices reflecting plant operations; adjust treatment processes as indicated by plant conditions; perform mechanical repairs, maintenance work, and modification to equipment used in a water quality control plant; use various mechanic's tools with skill and accuracy; adapt to day, swing or graveyard work shift; follow oral and written directions; perform heavy manual labor involving lifting, carrying, kneeling, crawling and climbing; work in adverse conditions which require exposure to noise, noxious smells, gases, contact with wastewater, and risk of bodily injury; interact positively and cooperate with co-workers, respond politely to customers, work as a team member, function under demanding time pressure, respond in a positive manner to supervision, and attend work and perform duties on a regular and consistent basis.

Experience: One year of experience in mechanical maintenance and/or water quality control plant operations.

Physical requirements: Moderate, and sometimes strenuous exertion required, including sustained walking, bending, climbing and lifting.

Education: Graduation from high school or equivalent.

License: Possession of a State Water Resources Control Board Grade I Operator's Certificate; possession of a valid Class C California Driver's License (including acceptable driving record).

THIS IS A CITYWIDE EXAM

The City and County of San Francisco has Maintenance Machinist vacancies at various departments Citywide.

San Francisco is a vibrant and dynamic city, on the forefront of economic growth & innovation, urban development, arts & entertainment, as well as social issues & change. This rich tapestry of culture and ideas is sustained by our City's commitment to heighten the quality of life for San Franciscans and residents of the greater Bay Area. Our employees play an important role not only in making our City what it is today, but also in shaping the future of San Francisco. 

Specific information regarding this recruitment process is listed below:

• Application Opening: May 31, 2024
• Application Deadline: Apply Immediately. Application filing will be open at least through Monday, June 24, 2024, and will close any time thereafter.
• Compensation Range: $103,116 - $125112 Annually (Appointments to this job class enter at Step 5)
• Recruitment ID: CBT-7332-148209 

Job Description

This position performs preventive, routine and emergency maintenance and repair of a variety of heavy and light industrial and marine equipment, related systems and components. The incumbent will operate precision equipment and respond to trouble calls associated with the Port's ferry terminal systems, boats, sewer pumps and other Port related equipment. The nature of this work requires sustained physical effort frequently under adverse weather conditions and/or working in confined spaces. The incumbent may be required to work alternative shifts in order to do tide-dependent work.

Nature of Work: Some positions may involve exposure to adverse physical and working condition and lifting objects weighing in excess of 70 pounds. Incumbents will be required to work varying hours and/or shifts, including weekends, evening and holidays in a 24 hour/7 days-a week operation.

The City of Redwood City is recruiting for a dynamic individual to fill the position of BUILDING INSPECTOR.

WHY JOIN THE REDWOOD CITY TEAM?

We offer a wide range of meaningful career opportunities with potential for growth, training and development, competitive salaries, flexible work schedules, paid time off, and robust benefits. The Redwood City team is guided by the core values of excellence, integrity, service, collaboration, inclusion and innovation.  Inherent in these values is a great organizational culture based on trust, strong and supportive leadership, respect, risk-taking, empowerment, and effective communication.

ABOUT THE POSITION

This is an excellent opportunity for an individual who possesses both the interpersonal skills and technical expertise needed to perform a range of moderately difficult combination inspections (building, electrical, plumbing and mechanical) of a variety of residences, commercial and industrial buildings. Redwood City currently has issued several large projects under construction containing several underground parking garages, podium concrete decks and large multi residential high-rise structures above. This opportunity will expand your skills in all phases of large commercial projects to custom residential projects through Redwood City.  To review the projects click here:  current-projects.

Located in Middletown, CA!

The Mechanic Operator position consists of five levels of competency.  Individuals can either enter into the classification at the beginning level of the job or somewhere between the entry level and the top step depending on the qualifications brought with them.  It is the expectation of NCPA that all employees progress to the top level.  In order to progress to the top level an employee must complete all components in a competency level within the associated training matrix.  Employees who successfully complete a training level matrix and who received a rating of “meets requirements” or higher by their immediate supervisor will be promoted when qualified.  Upon completion/demonstration of competencies employees will be expected to perform work in all completed levels and other job-related duties as required. All employees have the right to challenge any component in the training matrix by proving proficiencies verbally and practically.

General Scope of the Job
Under general supervision of the Mechanical Maintenance Supervisor and at times under the general direction of the Mechanic Operator Lead Person; to maintain, repair, adjust, install, and test, powerplant steam field, water injection systems and equipment and maintain lease site grounds.  The measure of accuracy and reliability is the safe, effective and efficient performance of the Facilities.  This position is predominately mechanic based with operation support as outlined below.

Description of Duties and Responsibilities
Level III:
This level of the Mechanic Operator position requires the completion of all Level III training requirements. The employee must perform the duties as described below and as defined in lower levels while attaining Level IV skills and experience through academic and hands-on training. Level III knowledge and skills focus on journey level mechanical duties and responsibilities.
•    Inspects, tests, calibrates, installs, rebuilds, adjusts, repairs and aligns all mechanical equipment such as hydraulic control systems, turbines, generators, cooling tower, pumps, electric motors, valves, gear reducers, compressors, blowers heat exchangers, HVAC systems excluding refrigerant replacement, fire protection systems, diesel and gas engines, mufflers, separators, traps, rock catchers, tanks, pipeline and pipe supports.
•    Maintains facility structures. 
•    Performs basic inspections and repairs various rigging equipment, fixtures and cranes.
•    Assists the scaffolding qualified journeyman in maintaining, and repairing scaffolding. 
•    Inspects and maintains safety devices such as harnesses and rescue equipment.
•    Works with Safety Manager to maintain records of regulated equipment.
•    Keeps accurate records of equipment history, reports and work orders on computer for CMMS.  Works with CMMS personnel for accuracy and reliability.
•    Performs preventative maintenance and assessments on various plant equipment.
•    Writes Work/Operating Procedures within area of expertise.
•    Requisitions replacement parts and supplies to carry out assigned tasks.
•    Makes working drawings of components and changes made to Plant systems relative to area of expertise.
•    Installs, inspects, tests, repairs, rebuilds, and maintains equipment such as portable and fixed site pumps, valves, mufflers, separators, traps, rock catchers, turbines, generators, motors, gear reducers, compressors and hydraulic control systems, pipelines, tanks, pipeline supports, effluent piping components.
•    Maintains lease site grounds structures, culverts, roads, drains and ditches.
•    Examines and diagnoses malfunctions or defective equipment on pumps, motors, valves, separators, vents, air vacuum breakers and compressors; disassembles/reassembles, overhauls and adjusts defective equipment
•    Installs, fits and calibrates equipment replacement parts.  Observes equipment operation.  Adjusts equipment to operational specifications using specialized tools and precision measuring instruments.
•    Disassembles, removes, repairs, replaces, assembles and aligns pipes, pipeline components, and valves repairing or replacing broken and worn parts using various hand tools.
•    Observes and directs contractors while digging trenches, cleaning tanks and maintaining lease site grounds.
•    Under the direction and training of operations, assists with clearances on steam field and effluent pipeline equipment for maintenance purposes.
•    Will be trained to Rig and lift equipment to install, repair or replace equipment.
•    Instructs and trains workers in repair and maintenance procedures of steam field, power plant and effluent pipeline equipment.
•    Maintains inventory of tools and materials for the maintenance work at the steam field and effluent pipeline.
•    Maintains steam field equipment records on work completed on CMMS or equivalent maintenance program.
•    Assists other classifications when needed.
•    Performs other job-related duties as required.
•    Acquire OSHA certified training to meet business needs.
•    Trains and advises other workers in the maintenance and operation of steam field and effluent pipeline equipment.
•    Maintains and repairs Hydraulic Control Systems.

Level IV:
This level of the Mechanic Operator position requires the completion of all Level IV training requirements for operational duties and responsibilities.  The employee must perform the duties as described below and as defined in lower levels while attaining Level V skills and experience through academic and hands-on training.
•    Reviews, coordinates and reports work orders, work activities and equipment clearances with appropriate personnel.  
•    Checks equipment to be cleared in advance to guarantee its condition to others.  Informs Operator Technician Lead Person and Supervisors of the status of equipment and systems.  
•    Under direction of the Operator Technician Lead Person or a designee, operates various equipment and performs basic equipment clearances on low voltages (<600 volt) electrical breakers, steam line equipment and effluent equipment.  
•    Terminates and connects motor wiring to facilitate bearing repairs (less than 600 volts.).
•    Conducts online test of equipment before certifying its status and performance.

Machinist Duties and Responsibilities
•     Sets up and operates machine tools to repair or reproduce equipment parts and fittings working from blueprints or defective parts using precision tools and measuring instruments.
•    Fabricates special tools, rigging equipment and replacement parts to repair equipment.   
•    Fabricates, modifies, shapes and repairs equipment parts using a variety of metal working machines.
•    Chips, grinds, bores, and drills equipment parts.
•    Verifies conformance of finished work piece to specifications, using precision measuring instruments.
•    Calibrates, fits and assembles equipment parts according to drawings and specifications using machine tools, power tools, and measuring instruments.
•    Installs machined replacement parts; starts and observes equipment operation to detect malfunctions or out-of-tolerance performance, adjusts as necessary.
•    Maintains shop equipment and tools.
•    Maintains inventory of machining tools.

Representative Physical and Job Demands
•    Regularly talks and listens to others to exchange and obtain information to direct the operation and maintenance of Geothermal Facility steam field and effluent equipment.
•    Regularly reaches, grasps, pushes and pulls various wrenches, hand tools, and other objects using manual dexterity and eye hand coordination to operate and maintain equipment.
•    Regularly climb ladders and walks on platforms near high temperature surfaces; works on slippery or uneven surfaces in precarious places.
•    Frequently walks, reaches, kneels and crouches using feet, legs, hands and manual strength to access and operate plant equipment.
•    Occasionally lifts and moves pumps motors and pipe weighing up to 50 pounds.
•    Routinely works near heated surfaces; works on slippery or uneven surfaces in precarious places to adjust or operate equipment.
•    Occasionally exposed to high voltage and other electrical hazards while working on equipment.
•    Routinely works in outside weather conditions and is exposed to chemicals, wet and humid conditions, extreme cold and heat while inspecting and maintaining equipment.  The noise level is frequently very loud.
•    Routinely listens to operating sounds of equipment to diagnosis equipment malfunctions.
•    Frequently operates forklifts cranes, air compressors, sandblasters and power tools to maintain and repair equipment.
•    Frequently operates Agency vehicles going to and from job locations.

Job Expectations
Acquisition and Use of Technical Knowledge
•    Possesses or acquires as needed the ability to detect, diagnose disassemble and repair steam and water equipment with a fundamental knowledge of; turbine equipment, and auxiliary systems and their capabilities; operation processes, mechanical and electrical theory and background to operate equipment; measuring devices and hand tools for maintenance work; general contamination and control practices and procedures; basic math, geothermal powerplant rules and regulations; clearance procedures, physics including pump mechanics; basic principles of thermodynamics and fluid flow.  Given this basic knowledge, understands own role within the plant and how that role requires the use of knowledge applied to practical, day to day, operations and maintenance demands.  Hold self-accountable to acquire knowledge that may be needed when a job situation changes, new tasks are introduced to the job, or when improved performance requires acquiring extended or specialized information.
•    Possesses or acquires as needed an extensive knowledge of safety, fire, and security rules and procedures.  Given the emphasis of safety at the plant, uses knowledge to improve plant conditions and the organization’s safety record.
•    Acquires knowledge of operations and maintenance procedures on a continuing basis to stay current as a significant contributor to plant solutions, safety performance, and operations and maintenance improvements.
•    Confers with Operator Technician Lead Person or Operations Supervisor to resolve system problems and offers a variety of workable solutions to complex problems and report status of systems and equipment.  
•    Identifies problems or trends with systems and equipment early to prevent operator or electrical errors. 
•    Passes knowledge on to other employees as a way to contribute to the performance of others, or get a job done.
•    Assesses own limitations with the fundamental knowledge needed to perform in the job.

Application of Technical and General Job Skills
Technical and job skills are indicated by demonstrating an ability to:
•    Efficiently and effectively operate, control, and maintain equipment, and be accountable for aspects of the job at the Geothermal Facility. 
•    Implement or use existing methods to control the waste of time, money and material resources, such as:
o    Acting to improve work procedures 
o    Conserving resources 
o    Expediting a job
o    Completing a work assignment efficiently
o    Completing long term work in an orderly fashion
•    Work with management to identify and learn from mistakes made and apply what is learned to future situations or plant conditions.
•    Establish and maintain effective work relationships with those contacted in the performance of required duties.
•    Review own action to determine the cause of poor working relationships so those relationships can be improved
•    May be required to work extended hours and on normal days off.
•    Operate Agency vehicles and equipment safely.

Training and Experience Requirements
Level III: Completion of the NCPA Level III training program or three years of equivalent journey-level mechanical experience.
Level IV: Completion of the NCPA Level IV training program or three years of equivalent journey-level mechanical experience and operations experience.

Driver’s License Requirement
Possession of an unrestricted Class C California operator’s license issued by the State of California, Department of Motor Vehicles.  Possession and maintenance of a good driving record as demonstrated by the absence of multiple or serious traffic violations or accidents within the last three (3) years.

Desired Qualifications 
•    Possession, or ability to obtain with training, a Class A California operator’s license issued by the State of California Department of motor Vehicles.
•    Ability to set up and operates machine tools to repair or reproduce equipment parts and fittings working from blueprints or defective parts using precision tools and measuring instruments.
•    Ability to Fabricate special tools, rigging equipment and replacement parts to repair equipment.   
•    Ability to Fabricate, modifies, shapes and repairs equipment parts using a variety of metal working machines.
•    Chips, grinds, bores, and drills equipment parts.
•    Verifies conformance of finished work piece to specifications, using precision measuring instruments.
•    Calibrates, fits and assembles equipment parts according to drawings and specifications using machine tools, power tools, and measuring instruments.
•    Installs machined replacement parts; starts and observes equipment operation to detect malfunctions or out-of-tolerance performance, adjusts as necessary.

EOE

The Application Programmer performs or assists in the design, documentation, coding, testing, and implementation of new application programs or enhancements to existing application programs consistent with the Software Development Life Cycle (SDLC) best practices and applicable computer programming standards and frameworks. The position is primarily responsible for the suite of Bid-to-Bill applications as well as other business applications in use by the Agency. The position will work with other developer staff and supervisor during probationary status to learn and develop proficiency in the use of the Agency's software development frameworks, processes, and documentation design standards.

ESSENTIAL DUTIES AND RESPONSIBILITIES
This position requires that the incumbent reports for work on time and maintains satisfactory attendance in accordance with Agency policy; Ensures work responsibilities are covered when absent; Arrives to meetings and appointments on time; Performs special assignments as assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Level I: 
This classification is an entry-level position that is not expected to perform with the same level of independence of direction and judgment as higher levels. The level I works closely with other senior-level CTAs and is often given direction to complete tasks, install and troubleshoot hardware and software, perform system upgrades, evaluate and apply patches to systems, work closely with customers, and provide application support through help desk requests, and creates and maintains documentation.

Level II: 
This classification requires having all Level I duties and responsibilities with a minimum of two years of experience in software application development. Level II receives occasional direction and guidance from other senior-level CTAs; otherwise, uses developed experience and professional judgment to successfully complete projects in accordance with defined requirements and established timelines.

Responsibilities:
•    Within a specific hardware and operating system environment, work to define and design the operating features of new programs or enhancements
•    Produce appropriate conceptual-level application documentation for review and approval by the supervisor
•    Produce appropriate programming documentation for the review of the Supervisor, with sufficient detail on which to base programming activities
•    Develop computer programs in accordance with design documentation, closely following coding standards and conventions used within NCPA
•    Test applications using prescribed test methodology and tools
•    Develop an implementation plan, prepare production rollout for approval by the supervisor, and coordinate with the Ops team to execute the rollout
•    Maintain and enhance software applications
•    Conduct independent communications with user departments in a cooperative and professional manner
•    Provide emergency system support outside normal working hours as needed, on a rotational basis with other department employees
•    Travel to NCPA remote field sites to provide support to remote users as needed 
•    Assist in the evaluation of proposed new or modified computer system hardware and software

MINIMUM QUALIFICATIONS

Level I:
Education and/or Experience      
Bachelor's degree in Computer Science, Management Information Systems, Computer Engineering, or related field from an accredited four-year college or university and at least six months of related programming experience and training.

Level II:
Education and/or Experience      
Bachelor’s degree in Computer Science, Management Information Systems, Computer Engineering or related field from an accredited four-year college or university and at least two years of related programming experience and training. A minimum of two years in design and programming experience including some experience programming interactive programs. Experience must include exposure to systems analysis techniques.

KNOWLEDGE AND ABILITIES 
Knowledge:
Knowledge of VB.Net and/or C# as core programming language is essential; Integrated development environment (IDE) such as Microsoft Visual Studio; Source control management tools such as Team Foundation Server (TFS) and Git; JavaScript, HTML5, and Cascading Style Sheets (CSS) for developing web pages is highly desired; Oracle PL/SQL, SQL-Server T-SQL or similar SQL experience and understanding of relational database principles. Knowledge of software testing methodologies and tools, computer equipment and capabilities, data communications and local area networking, and client-server software is essential; Principles and programming techniques used to implement online interactive applications, technical report writing, systems analysis techniques, database management concepts, and management information system concepts; DevOps and related best practices; and knowledge of the Component-based Scalable Logical Architecture (CSLA) is an advantage.

Abilities:
Ability to write moderately complex programs and develop detailed program specifications; Demonstrate an understanding of MVC (Model-View-Controller; Stay up to date with related software development technologies through training, product research, and participating in conferences and user groups. Ability to work effectively with a broad, diverse cross-section of peers and various individual personalities; listen effectively, communicate with, and maintain a professional working relationship with co-workers; communicate clearly, efficiently, and professionally both over the phone and in person; Maintain strong organizational skills; and the ability to complete quality and timely work with minimal supervision.

SPECIAL REQUIREMENTS

Valid California Driver's License and insurance. 

This job has no supervisory responsibilities.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this Job, the employee is regularly required to sit and view and operate a computer, use hands to finger, handle, or feel, reach with hands and arms, and talk or hear. Requires manual finger dexterity and eye-hand coordination to operate and adjust office equipment such as computers. The employee is occasionally required to stand and walk. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, color vision, and the ability to adjust focus.

The noise level in the work environment is usually quiet.

All employees are responsible for contributing to an inclusive, safe, and secure work environment that values diverse cultures, perspectives, and experiences and is free from discrimination.

Final Filing Date:  First review of applications will be on June 7, 2024. NCPA reserves the right to close this posting once a sufficient number of applications have been received.
 

Under the direction of the IS Operations & Support Assistant Manager, the Database Administrator architects, tests, implements, maintains, and documents Agency databases. The database administrator collaborates closely with IS development and Agency operations personnel to provide backend database solutions for custom applications, including real-time, scheduling, and settlement programs. The database administrator troubleshoots and provides solutions for database problems.

Level III
This classification supports and maintains the Agency’s database infrastructure and related applications. Administers all database objects, including but not limited to schemas, tables, clusters, indexes, and views. Performs database re-organizations as needed to improve performance. Performs impact analysis of changes to be made to database objects before implementing significant schema changes. Ensures security for all databases by creating roles and associated privileges. Controls and monitors user access to databases. This is a journey-level position and is given minimal direction in job duties and responsibilities.  

Level IV
Architects and designs the Agency’s database infrastructure and ensures the highest levels of availability. Leads database projects to establish new database architectures. Oversees upgrades and implementations of new databases or related software.   Position can perform all lower level requirements and works independently with very little direction May be called upon to provide reports or present to the Agency’s Information Technology Committee. May direct the work of lower classifications.     

ESSENTIAL DUTIES AND RESPONSIBILITIES
This position requires that the incumbent reports for work on time and maintains satisfactory attendance in accordance with Agency policy; Ensures work responsibilities are covered when absent; Arrives to meetings and appointments on time; Performs special assignments for the Assistant Manager, Information Services or others as assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Responsibilities:
Design, create and maintain all Oracle databases required for development, testing, and production usage. 

Install, configure, upgrade, and troubleshoot Database server software for both stand-alone instances and Real Application Clusters (RAC). Includes patching both Oracle and Windows. 

Administer all database objects, including schemas, tables, clusters, indexes, views, sequences, constraints, packages, and procedures. This includes creating primary database storage structures (tablespaces) and primary objects (tables, views, indexes). Manage the sharing of resources between applications. 

Troubleshoot problems regarding the databases, servers, applications and development tools. Open technical support cases with support as needed and serve as primary support contact for NCPA. 

Perform capacity planning for all databases. Work closely with IS storage and system administration staff to plan and allocate database system storage. 

Experienced with creating, managing, and maintaining data warehouse technologies.

Perform ongoing monitoring and tuning of all database instances and Windows servers to optimize database performance and reliability. 

Plan and implement backup and recovery of Agency databases. Maintain remote standby databases using archive logs.

Implement and enforce security for all of the Databases through creating and maintaining users and roles, and assigning privileges. Control and monitor user access to the database. 

Perform database re-organizations as required to improve performance and ensure maximum uptime of the database. Modify the database structure from information given by application developers. Gather statistics, create indexes, create or expand tablespaces as needed. 

Perform SQL and PL/SQL tuning and performance monitoring. 

Set up and maintain documentation and standards for database practices and procedures. 

Provide technical support to application developers and database users. 

Perform impact analysis of changes to be made to database objects. Approve and implement/oversee significant schema changes and changes to database design. 

Provide support during non-standard hours (on an as-needed basis, on-call 24x7x365). 

Provide a strategic database direction for the organization.

MINIMUM QUALIFICATIONS

Level III:
Education and/or Experience
A bachelor’s degree from an accredited four-year college or university in Computer Science, Management Information Systems, Engineering, or a related field and five or more years of related experience and/or training, or an equivalent combination of education and experience.

Level IV: 
Education and/or Experience 
A bachelor’s degree from an accredited four-year college or university in Computer Science, Management Information Systems, Engineering, or a related field and eight or more years of related experience and/or training, or an equivalent combination of education and experience.

KNOWLEDGE AND ABILITIES 

Knowledge:
Knowledge of Oracle database; Oracle Recovery Manager (RMAN), Real Application Clusters (RAC); Oracle Automatic Storage Management (ASM), SQL, PL/SQL; Microsoft SQL Server; Windows; networking; virtual machines; batch/cmd scripting; PowerShell, SQL*Plus; Toad, GIT; physical database design; relational database theory; disaster recovery; back-up and recovery, relational database theory; Windows and Linux system administration; the Oracle optimizer and execution plans; troubleshooting and debugging, networking (TCP/IP), database security.

Abilities:
Ability to write complex programs and develop detailed program specifications; Ability to analyze data and situations, reason logically and creatively, identify problems, draw valid conclusions, and develop effective solutions; Ability to apply creative thinking in the design and development of methods of processing data with electronic computers; Ability to establish and maintain cooperative working relationships with those contacted in the course of the work; Ability to communicate effectively verbally and in writing, and prepare effective reports.

SPECIAL REQUIREMENTS

Valid California Driver's License and insurance as occasional travel may be required. 
While performing the duties of this job, the employee is regularly required to sit. The employee is occasionally required to stand and walk. Occasionally, the employee may be required to perform simple grasping and fine manipulation, use telephone, write or use a keyboard to communicate, crouch, crawl, reach and lift equipment up to 40 lbs. 

Level III: This job has no supervisory responsibilities. 

Level IV: This job may have supervisory responsibilities.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The noise level in the work environment is usually moderate.

All employees are responsible for contributing to an inclusive, safe, and secure work environment that values diverse cultures, perspectives, and experiences and is free from discrimination.
 

MAINTENANCE WORKER (Full time)

The City of Marysville seeks qualified candidates for this excellent career opportunity!

Working in the Public Works Department, the Maintenance Worker I/II will perform a variety of unskilled, semiskilled and skilled light and heavy duty construction, maintenance and repair work involving public works, sewer and drainage systems, buildings, parking meters, and other facilities.

The position will be filled as a Maintenance Worker I/II based on the experience and qualifications of the candidate.

SALARY RANGE:
Maintenance Worker I/II – $3,350.50 to $4,485.52 per month (wages effective 7/1/2024 per MOU).  
 

FINAL FILING DATE:
A complete application packet must be completed online by 11:59 pm, Monday, June 24, 2024.

DISTINGUISHING CHARACTERISTICS:

Maintenance Worker I:  This is the entry level class in the maintenance worker series. Positions in this class normally perform a variety of unskilled and semi‑skilled maintenance tasks. Although trucks and other motorized equipment may be operated by a Maintenance Worker I, the equipment is used on a training basis or for tasks which are repetitious in nature. Under this training concept, positions assigned to the class of Maintenance Worker II which become vacant may reasonably be filled at the Maintenance Worker I level, with the understanding that reassignment to the Maintenance Worker II class may be expected following successful job performance and personal development.

Maintenance Worker II: This is the journey level in the maintenance worker series. Positions assigned to this class are expected to perform semi‑skilled and skilled public works maintenance activities and to operate light and moderately heavy power‑driven equipment on a continuing basis. All positions allocated to this class require that an incumbent be able to work independently, exercising judgment and initiative to fulfill assigned tasks. Maintenance Workers II may also be expected to assist in the supervision and training of less experienced personnel.

EXAMPLES OF ESSENTIAL DUTIES

Examples of Work are not intended to be an exhaustive list of all responsibilities, duties and skills. They are intended to be accurate summaries of what the job classification involves and what is required to perform it. Employees are responsible for all other duties as assigned.

• Perform a variety of maintenance work in the construction, maintenance and repair of streets, parks, sewers, storm drains, curbs, gutters, sidewalks, parking meters and other public facilities.
• Operate power‑driven equipment such as skip loaders, dump trucks, water trucks and fork lifts.
• Break out old concrete work such as curbs, sidewalks, and gutters.
• Cut and prepare streets for patches, spread premix and oil, and rake asphalt.
• Replace, repair, couple, test, and backfill sewer lines.
• Clean and maintain basic tools used on the job.
• Paint traffic directional markings, such as crosswalks and safety loading zones.
• Fabricate, install, repair and replace street signs.
• Operate heavy power‑driven equipment on a relief or training basis.
• Water, mow, weed, trim, renovate, and fertilize grass and other landscaped areas.
• Rake leaves, clean walks, fields, courts, and other facilities.
• Spade and otherwise prepare ground around plants and shrubs, including mixing and applying fertilizers.
• Plant, trim and/or remove trees, flowers, and shrubs. 
• Load trimmings on trucks for disposal.
• Pick up rubbish and litter materials and perform general grounds cleaning.
• Operate power mowers, edgers, sewer rodders, and other hand-operated and power tools in the performance of maintenance and repair activities.
• Drive vehicles as required and assist in routine care and upkeep of such vehicles.
• Assist in moving and installing park and recreational equipment.
• Install, maintain, and repair sewer system mains, sprinkler systems, pipes and facilities.
• Inspect, maintain, and repair parking meter devices.

QUALIFICATION REQUIREMENTS

To be successful in these positions, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skills, and/or abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EMPLOYMENT STANDARDS (position requirements at entry and throughout employment)

Any combination of education, training, and experience which provides the required knowledge, skills, and abilities to perform the job is qualifying. These employment standards would typically be achieved by possession of a high school diploma, or equivalent, and:

Maintenance Worker I: Possession of a valid California Class C driver license.  There is an employee weight limitation of 325 pounds to meet the legal limits for the safe use of certain equipment.

Maintenance Worker II: One year full-time performing the duties and activities expected of incumbents in the Maintenance Worker I classification. Possession of a valid California Class C driver license.  There is an employee weight limitation of 325 pounds to meet the legal limits for the safe use of certain equipment.

PHYSICAL DEMANDS

The physical demands described here are representative of those which must be met by an employee to successfully perform the essential functions of this job. Reasonable accom­modations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is regularly required to sit, walk, stand, stoop, climb, dig, lift up to 50 pounds and push motorized equipment.

Specific vision abilities required by this job include close vision and the ability to adjust focus.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing essential functions of this job. Reasonable accom­modations may be made to enable individuals with disabilities to perform the essential functions.

The noise level in the work environment is usually moderately quiet indoors, and varying outdoors.

Work is performed in all sorts of weather, including inclement weather and temperatures above 100 degrees Fahrenheit.