Search Jobs

The City of San Mateo City Clerk’s Office is looking for a highly qualified Deputy City Clerk

Why Join our Department?

The Office of the City Clerk is a service department within the municipal government upon which the five-member City Council, all City departments, and the general public rely for information regarding the operations and legislative history of the City. The City Clerk serves as the liaison between the public and the City Council and provides related municipal services such as serving as the Elections Official, providing key staff for Council meetings and recording all Council action, and serving as records manager for the protection and preservation of the public record.

Look to some of the reasons why the City of San Mateo is a great place to work, https://www.youtube.com/watch?v=_GTIzeSpc_g

What You’ll Do

Under the general direction of the City Clerk, the Deputy City Clerk uses independent judgement to plan, organize, direct, and perform a variety of complex administrative, technical, and supervisory duties in support of the City Clerk Department’s day-to-day operations, primarily legislative operations and contract and process management. The Deputy City Clerk serves as the second in command within the City Clerk’s Department and provides backup to the City Clerk.  The Deputy City Clerk will provide a high level of administrative and technical support to the City Clerk and other departments and perform all duties of the City Clerk in his/her absence. Duties may include, but are not limited to, the following:

• Assists the City Clerk in performing the day to day functions of the City Clerk's office; and in the absence of the City Clerk, act as City Clerk, performing such duties as serving as the Clerk of the City Council, maintaining meeting protocols, parliamentary procedures and proper conduct, writing agenda reports, taking minutes, certifying ordinances, resolutions, agreements and other official documents, administer oaths of office and supervise staff.
• Reviews changes in law, regulations and guidelines for their effect on City Council and Advisory Body activities; evaluates the effect of such changes, and recommends and implements changes to policies and procedures as required for compliance. Participate in the development of an installation of new or revised programs, systems, procedures, and methods of operation; update and revise policies and procedures.
• Assists in the preparation of the annual budget for the Department; estimates staffing, equipment, and supply needs based upon recent trends and planned activities; monitors expenditures after budget adoption.
• Implements and manages the agenda production process including maintaining a deep knowledge of the agenda management software and process; training staff in the use of the software and process; and assists in deploying consistent agenda practices across the organization; coordinating with other departments on agenda content; enforcing work product standards and holding departments and higher classifications responsible for meeting standards and deadlines; and producing the agenda and agenda packet per state law and city requirements.
• Manages the publication of legal and public notices, for all Council bodies, in accordance with City, State and Federal law, and filing, indexing, certifying, processing for recordation, and safeguarding of all City Council proceedings.
• Maintains compliance with applicable Federal, State, local laws, relating to areas of responsibility, including but not limited to, California Elections Coe, the Brown Act, Political Reform Act, Conflict of Interest Code, and the Public Records Act.
• Oversees maintenance and development of City-wide records management initiatives.
• Assists the City Clerk in the administration and conduct of municipal elections and special events. Serves as Filing Officer for campaign and conflict of interest finance reporting.
• Serves as liaison to the County Registrar of Voters.
• Attends City Council meetings with the City Clerk to assist with operating the audio / visual / agenda / voting system and take minutes as required.  Responsible for after Council action including producing and maintaining official City records and documents in good order such as resolutions, ordinances, contracts, deeds, correspondence, inter-agency notifications and minutes.
• Prioritizes work of staff; develops and trains staff; conducts performance evaluations; approves actions regarding hiring, promoting, and disciplining; and approves recommendations on all employee actions.

The Deputy City Clerk receives general supervision from the City Clerk or higher level personnel and exercises direct supervision over management and administrative staff.

For a complete list of duties, reference our job specifications at https://www.cityofsanmateo.org/DocumentCenter/Home/Index/86c

Located in Middletown, CA!

The Mechanic Operator position consists of five levels of competency.  Individuals can either enter into the classification at the beginning level of the job or somewhere between the entry level and the top step depending on the qualifications brought with them.  It is the expectation of NCPA that all employees progress to the top level.  In order to progress to the top level an employee must complete all components in a competency level within the associated training matrix.  Employees who successfully complete a training level matrix and who received a rating of “meets requirements” or higher by their immediate supervisor will be promoted when qualified.  Upon completion/demonstration of competencies employees will be expected to perform work in all completed levels and other job-related duties as required. All employees have the right to challenge any component in the training matrix by proving proficiencies verbally and practically.

General Scope of the Job
Under general supervision of the Mechanical Maintenance Supervisor and at times under the general direction of the Mechanic Operator Lead Person; to maintain, repair, adjust, install, and test, powerplant steam field, water injection systems and equipment and maintain lease site grounds.  The measure of accuracy and reliability is the safe, effective and efficient performance of the Facilities.  This position is predominately mechanic based with operation support as outlined below.

Description of Duties and Responsibilities
Level III:
This level of the Mechanic Operator position requires the completion of all Level III training requirements. The employee must perform the duties as described below and as defined in lower levels while attaining Level IV skills and experience through academic and hands-on training. Level III knowledge and skills focus on journey level mechanical duties and responsibilities.
•    Inspects, tests, calibrates, installs, rebuilds, adjusts, repairs and aligns all mechanical equipment such as hydraulic control systems, turbines, generators, cooling tower, pumps, electric motors, valves, gear reducers, compressors, blowers heat exchangers, HVAC systems excluding refrigerant replacement, fire protection systems, diesel and gas engines, mufflers, separators, traps, rock catchers, tanks, pipeline and pipe supports.
•    Maintains facility structures. 
•    Performs basic inspections and repairs various rigging equipment, fixtures and cranes.
•    Assists the scaffolding qualified journeyman in maintaining, and repairing scaffolding. 
•    Inspects and maintains safety devices such as harnesses and rescue equipment.
•    Works with Safety Manager to maintain records of regulated equipment.
•    Keeps accurate records of equipment history, reports and work orders on computer for CMMS.  Works with CMMS personnel for accuracy and reliability.
•    Performs preventative maintenance and assessments on various plant equipment.
•    Writes Work/Operating Procedures within area of expertise.
•    Requisitions replacement parts and supplies to carry out assigned tasks.
•    Makes working drawings of components and changes made to Plant systems relative to area of expertise.
•    Installs, inspects, tests, repairs, rebuilds, and maintains equipment such as portable and fixed site pumps, valves, mufflers, separators, traps, rock catchers, turbines, generators, motors, gear reducers, compressors and hydraulic control systems, pipelines, tanks, pipeline supports, effluent piping components.
•    Maintains lease site grounds structures, culverts, roads, drains and ditches.
•    Examines and diagnoses malfunctions or defective equipment on pumps, motors, valves, separators, vents, air vacuum breakers and compressors; disassembles/reassembles, overhauls and adjusts defective equipment
•    Installs, fits and calibrates equipment replacement parts.  Observes equipment operation.  Adjusts equipment to operational specifications using specialized tools and precision measuring instruments.
•    Disassembles, removes, repairs, replaces, assembles and aligns pipes, pipeline components, and valves repairing or replacing broken and worn parts using various hand tools.
•    Observes and directs contractors while digging trenches, cleaning tanks and maintaining lease site grounds.
•    Under the direction and training of operations, assists with clearances on steam field and effluent pipeline equipment for maintenance purposes.
•    Will be trained to Rig and lift equipment to install, repair or replace equipment.
•    Instructs and trains workers in repair and maintenance procedures of steam field, power plant and effluent pipeline equipment.
•    Maintains inventory of tools and materials for the maintenance work at the steam field and effluent pipeline.
•    Maintains steam field equipment records on work completed on CMMS or equivalent maintenance program.
•    Assists other classifications when needed.
•    Performs other job-related duties as required.
•    Acquire OSHA certified training to meet business needs.
•    Trains and advises other workers in the maintenance and operation of steam field and effluent pipeline equipment.
•    Maintains and repairs Hydraulic Control Systems.

Level IV:
This level of the Mechanic Operator position requires the completion of all Level IV training requirements for operational duties and responsibilities.  The employee must perform the duties as described below and as defined in lower levels while attaining Level V skills and experience through academic and hands-on training.
•    Reviews, coordinates and reports work orders, work activities and equipment clearances with appropriate personnel.  
•    Checks equipment to be cleared in advance to guarantee its condition to others.  Informs Operator Technician Lead Person and Supervisors of the status of equipment and systems.  
•    Under direction of the Operator Technician Lead Person or a designee, operates various equipment and performs basic equipment clearances on low voltages (<600 volt) electrical breakers, steam line equipment and effluent equipment.  
•    Terminates and connects motor wiring to facilitate bearing repairs (less than 600 volts.).
•    Conducts online test of equipment before certifying its status and performance.

Machinist Duties and Responsibilities
•     Sets up and operates machine tools to repair or reproduce equipment parts and fittings working from blueprints or defective parts using precision tools and measuring instruments.
•    Fabricates special tools, rigging equipment and replacement parts to repair equipment.   
•    Fabricates, modifies, shapes and repairs equipment parts using a variety of metal working machines.
•    Chips, grinds, bores, and drills equipment parts.
•    Verifies conformance of finished work piece to specifications, using precision measuring instruments.
•    Calibrates, fits and assembles equipment parts according to drawings and specifications using machine tools, power tools, and measuring instruments.
•    Installs machined replacement parts; starts and observes equipment operation to detect malfunctions or out-of-tolerance performance, adjusts as necessary.
•    Maintains shop equipment and tools.
•    Maintains inventory of machining tools.

Representative Physical and Job Demands
•    Regularly talks and listens to others to exchange and obtain information to direct the operation and maintenance of Geothermal Facility steam field and effluent equipment.
•    Regularly reaches, grasps, pushes and pulls various wrenches, hand tools, and other objects using manual dexterity and eye hand coordination to operate and maintain equipment.
•    Regularly climb ladders and walks on platforms near high temperature surfaces; works on slippery or uneven surfaces in precarious places.
•    Frequently walks, reaches, kneels and crouches using feet, legs, hands and manual strength to access and operate plant equipment.
•    Occasionally lifts and moves pumps motors and pipe weighing up to 50 pounds.
•    Routinely works near heated surfaces; works on slippery or uneven surfaces in precarious places to adjust or operate equipment.
•    Occasionally exposed to high voltage and other electrical hazards while working on equipment.
•    Routinely works in outside weather conditions and is exposed to chemicals, wet and humid conditions, extreme cold and heat while inspecting and maintaining equipment.  The noise level is frequently very loud.
•    Routinely listens to operating sounds of equipment to diagnosis equipment malfunctions.
•    Frequently operates forklifts cranes, air compressors, sandblasters and power tools to maintain and repair equipment.
•    Frequently operates Agency vehicles going to and from job locations.

Job Expectations
Acquisition and Use of Technical Knowledge
•    Possesses or acquires as needed the ability to detect, diagnose disassemble and repair steam and water equipment with a fundamental knowledge of; turbine equipment, and auxiliary systems and their capabilities; operation processes, mechanical and electrical theory and background to operate equipment; measuring devices and hand tools for maintenance work; general contamination and control practices and procedures; basic math, geothermal powerplant rules and regulations; clearance procedures, physics including pump mechanics; basic principles of thermodynamics and fluid flow.  Given this basic knowledge, understands own role within the plant and how that role requires the use of knowledge applied to practical, day to day, operations and maintenance demands.  Hold self-accountable to acquire knowledge that may be needed when a job situation changes, new tasks are introduced to the job, or when improved performance requires acquiring extended or specialized information.
•    Possesses or acquires as needed an extensive knowledge of safety, fire, and security rules and procedures.  Given the emphasis of safety at the plant, uses knowledge to improve plant conditions and the organization’s safety record.
•    Acquires knowledge of operations and maintenance procedures on a continuing basis to stay current as a significant contributor to plant solutions, safety performance, and operations and maintenance improvements.
•    Confers with Operator Technician Lead Person or Operations Supervisor to resolve system problems and offers a variety of workable solutions to complex problems and report status of systems and equipment.  
•    Identifies problems or trends with systems and equipment early to prevent operator or electrical errors. 
•    Passes knowledge on to other employees as a way to contribute to the performance of others, or get a job done.
•    Assesses own limitations with the fundamental knowledge needed to perform in the job.

Application of Technical and General Job Skills
Technical and job skills are indicated by demonstrating an ability to:
•    Efficiently and effectively operate, control, and maintain equipment, and be accountable for aspects of the job at the Geothermal Facility. 
•    Implement or use existing methods to control the waste of time, money and material resources, such as:
o    Acting to improve work procedures 
o    Conserving resources 
o    Expediting a job
o    Completing a work assignment efficiently
o    Completing long term work in an orderly fashion
•    Work with management to identify and learn from mistakes made and apply what is learned to future situations or plant conditions.
•    Establish and maintain effective work relationships with those contacted in the performance of required duties.
•    Review own action to determine the cause of poor working relationships so those relationships can be improved
•    May be required to work extended hours and on normal days off.
•    Operate Agency vehicles and equipment safely.

Training and Experience Requirements
Level III: Completion of the NCPA Level III training program or three years of equivalent journey-level mechanical experience.
Level IV: Completion of the NCPA Level IV training program or three years of equivalent journey-level mechanical experience and operations experience.

Driver’s License Requirement
Possession of an unrestricted Class C California operator’s license issued by the State of California, Department of Motor Vehicles.  Possession and maintenance of a good driving record as demonstrated by the absence of multiple or serious traffic violations or accidents within the last three (3) years.

Desired Qualifications 
•    Possession, or ability to obtain with training, a Class A California operator’s license issued by the State of California Department of motor Vehicles.
•    Ability to set up and operates machine tools to repair or reproduce equipment parts and fittings working from blueprints or defective parts using precision tools and measuring instruments.
•    Ability to Fabricate special tools, rigging equipment and replacement parts to repair equipment.   
•    Ability to Fabricate, modifies, shapes and repairs equipment parts using a variety of metal working machines.
•    Chips, grinds, bores, and drills equipment parts.
•    Verifies conformance of finished work piece to specifications, using precision measuring instruments.
•    Calibrates, fits and assembles equipment parts according to drawings and specifications using machine tools, power tools, and measuring instruments.
•    Installs machined replacement parts; starts and observes equipment operation to detect malfunctions or out-of-tolerance performance, adjusts as necessary.

EOE

First Review of Applications

The first review of applications is June 3, 2024, at 12:00 p.m. (PST).  This recruitment may close without notice after this date so interested applicants are encouraged to apply immediately. A resume, response to the writing prompt, and supplemental questionnaire (part of the online application) must be submitted with the completed City application.

To be considered for this outstanding employment opportunity, please complete an application online.

Writing Prompt

Scenario: You are a Management Analyst in the City Manager’s Office tasked with researching and analyzing policies relevant to homeless services and mitigation practices.

In March 2024, California passed Proposition 1. Proposition 1 authorizes $6.4 billion in bonds to pay for major projects such as housing for veterans and mental health, drug, and/or alcohol facilities.  Proposition 1 will also shift how revenue from the 1% tax on income above $1 million is spent under the law. Proposition 1 renames the Mental Health Services Act (2004) to the Behavioral Health Services Act and expands its purpose to include substance use disorders, including for persons without a mental illness.

The City of Fremont’s Homelessness Response Team is drafting a Homelessness Response Plan for Fremont. The Team will be presenting the plan to City Council in May 2024 for study and potential adoption.

Candidate Task: Draft a memorandum addressing Proposition 1 and its potential impact on the City’s Fremont Homelessness Response Planning strategies. Please include:

• Proposition 1’s possible fiscal impacts
• Recommended changes to Strategy 1, 2, 3, 4, and 5 in the Fremont Homelessness Response Planning

Resources:

Fremont’s Homelessness Response Planning

City of Fremont 2022 Homeless Point-In-Time Count & Survey

City of Fremont Homelessness Response Website

Selection Process
The process may include individual and/or panel interviews, professional reference checks, fingerprint check for criminal history and other related components. Only those candidates who have the best combination of qualifications in relation to the requirements and duties of the position will continue in the selection process. Meeting the minimum qualifications does not guarantee an invitation to participate in the process.

Reasonable Accommodation
Human Resources will make reasonable efforts in the examination process to accommodate persons with disabilities. Please advise Human Resources of any special needs a minimum of 5 days in advance of the selection process by calling (510) 494-4660 or emailing humanresources@fremont.gov.
 
Contact Us
For additional information, please contact Human Resources Department at: humanresources@fremont.gov.
 
The information contained herein is subject to change and does not constitute either an expressed or implied contract. 

Please see the Management Analyst I and Management Analyst II job specifications for the full job descriptions.

The City of Lincoln is accepting applications for the position of Refuse Truck Driver II in the Solid Waste division of the Public Works department. Under general supervision, this position performs a variety of tasks in the collection of residential, commercial and industrial solid waste refuse; drive and operate refuse collection vehicles; organize, assign and review the work of others and perform other related duties as required.  

DISTINGUISHING CHARACTERISTICS

Refuse Truck Driver II

This is a journey level class and is distinguished from the Maintenance Worker I classification by the ability to perform the full range of duties assigned with only occasional instruction or assistance as unusual or unique situations arise. This class is distinguished from the Senior Refuse Truck Diver in that the latter provides technical and functional supervision over assigned staff or division programs and responsibilities.

SUPERVISION RECEIVED/EXERCISED

Receives general supervision from a Public Works Supervisor. May receive technical and functional supervision from a Senior Refuse Truck Driver.

ESSENTIAL FUNCTIONS

Include but are not limited to the following:

• Drives and operates a variety of collection vehicles and equipment including one or two-person-staffed refuse collection truck, front, rear and side loaders in the collection and transportation of residential and commercial refuse; responds to afterhours call-outs if assigned.
• Maintains assigned truck by regular cleaning and washing, including inspecting for mechanical or other operating problems; reports mechanical or related problems for maintenance; may perform minor maintenance as appropriate.
• Operates hydraulic/mechanical controls to load, compress, and dump refuse; collects and disposes of debris on assigned route; transports refuse to/unload at appropriate landfill sites and/or sewage treatment plant.
• Assists with battery sorting, electronic waste collection, bin repair or delivery, cardboard removal, illegal dumping cleanup, and any other related solid waste program or assignment.
• Completes and posts notification tags on containers, bins and dumpsters for unacceptable contents for refuse collection.
• Prepares, maintains and submits records, reports and forms including time records, equipment and maintenance records, and route maps and logs.
• Responds to questions and concerns from the general public; provides information as is appropriate and resolves public service complaints.
• Establishes positive working relationships with representatives of community organizations, state/local agencies, City management and staff and the public.
• Performs other related duties as assigned.

PHYSICAL, MENTAL AND ENVIRONMENTAL WORKING CONDITIONS

Position requires sitting, standing, walking on level and slippery surfaces, reaching, twisting, turning, kneeling, bending, stooping, squatting, crouching, grasping and making repetitive hand movement in the performance of daily duties. The position also requires both near and far vision when inspecting work and operating assigned equipment. The need to lift, carry and push tools, equipment and supplies weighing 25 pounds or more is also required. Additionally, the incumbent in this outdoor position works in all weather conditions including wet, hot and cold. The incumbent may use cleaning and lubricating chemicals, pesticides or herbicides which may expose the employee to fumes, dust and air contaminants. The nature of the work also requires the incumbent to climb ladders, use power and noise producing tools and equipment, operate hydraulic aerial devices, drive motorized vehicles and heavy equipment, work in heavy vehicle traffic conditions and often work with constant interruptions.

KNOWLEDGE/SKILLS/ABILITIES

The following are a representative sample of the KSA’s necessary to perform essential duties of the position.

Knowledge of:  Methods, practices and techniques of solid waste and refuse collection and disposal; practices, techniques and materials used in the collection and disposal of solid waste refuse; knowledge of the City street system; applicable federal, state and local laws, codes and regulations; operating characteristics and safety requirements for operation of trucks, refuse vehicles and other heavy and light equipment; defensive driving; proper lifting procedures; Principles and practices of lead supervision, training, and performance evaluation, including safety practices and related record-keeping; methods and techniques for record keeping; basic principles of mathematics; occupational hazards and standard safety procedures.

Skill to:  Safe, effective, defensive and attentive driving, along with experience using a variety of solid waste and refuse collection vehicles, equipment, tools and materials. 

Ability to:  Perform solid waste refuse collection and disposal; drive and operate solid waste and refuse collection trucks; respond to issues and concerns from the community; interpret, explain and apply applicable laws, codes and regulations; operate a variety of solid waste and refuse collection equipment, vehicles and tools; perform heavy manual labor for extended periods of time; work at substantial heights; respond to afterhours call-outs if assigned; organize, prioritize and follow-up on work assignments; work independently and as part of a team; make sound decisions within established guidelines; analyze a complex issue, and develop and implement an appropriate response; develop and coordinate collection route schedules, including identification of non-routine special routes/equipment needs related to special events/projects; inspect trucks for maintenance/replacement recommendations; act as a lead worker and perform advanced journey level solid waste refuse collection work related to area of assignment; follow written and oral directions; observe safety principles and work in a safe manner; communicate clearly and concisely, both orally and in writing; establish and maintain effective working relationships.

THE SELECTION PROCESS

The process may include an in-basket exercise, individual interviews, panel interviews and/or other related components.  Only those candidates who have the best combination of qualifications in relation to the requirements and duties of the position will continue in the selection process. The candidate selected for the position will be required to complete a background check including reference checks, fingerprint check, medical exam, drug-screening and/or other related components.

Human Resources will make reasonable efforts in the examination process to accommodate persons with disabilities. Please advise Human Resources of any special needs a minimum of five days in advance of the selection process exam by calling (916) 434-3229 or emailing hr@lincolnca.gov. The City of Lincoln is an Equal Opportunity Employer.

The information contained herein is subject to change and does not constitute either an expressed or implied contract.

The Maintenance Operations Department is recruiting for the position of Street Maintenance Worker I. 

This recruitment will close on June 6, 2024 at 5:00 PM (PT) or when the first 250 applications are received, whichever comes first. Please apply promptly. A resume must be submitted with the completed online application. Applications submitted without a resume may not be considered. Only online applications will be accepted.

The current vacancy is assigned to Asphalt and Concrete. If you are interested in employment in this job classification, you should apply to ensure you are considered for future opportunities that may utilize the candidates from this recruitment.

Examples of Job Duties: 

• Cleans work sites and equipment.
• Perform installation of various traffic control devices and markings.
• Drives truck with trailer.
• Performs heavy physical labor including lifting, carrying heavy objects; and shoveling, raking, and leveling asphalt.
• Clears and cleans roadsides, gutters, culverts and other drainage facilities.
• Participates in the removal, repair and replacement of storm drainage pipe.
• Sets-up and removes traffic safety zones for construction.
• Works in all weather conditions and in all terrain conditions.
• Works at all times of day and night.
• Perform preventative maintenance, adjustments and minor repairs on equipment.
• Cleans equipment, grease, lubricate, and fuel vehicles.
• Perform inspection and cleaning of drain inlets and storm lines.

Asphalt and Concrete Assignment:

• Repairs and replaces asphalt and concrete.
• Applies, rake, and tamp asphalt to perform Class A patching, skin patching, and sand sealing surface cracks.
• Uses rake, shovel, and pick in street repair work.
• Removes failed asphalt.
• Sprays oil on excavated area and over patches.
• Selects proper tip and angle of cut for jackhammer.
• Operates compressor, jackhammer and other power tools.
• Under supervision operate loader, backhoe, or storm drain cleaning machines.
• Performs concrete repair work.
• Cuts lumber for concrete forms to proper size and place stakes.
• Breaks up and remove concrete.
• Spreads and level base rock.
• Mixes concrete; pour concrete into forms, tamp, jitterbug surface.
• Applies concrete finish with trowel, screed, float or other tools.
• Patch holes with fresh concrete.

 
Traffic Safety Assignment

• Replaces, maintains and repairs guard rails, traffic dividers, signs, and similar traffic control devices.
• Assists in determining color of paint to be applied to street markings.
• Selects proper stencils for street markings.
• Applies stripes and intervals for new street markings.
• Places stencils over old street markings, start compressor and spray inside stencils.
• Cleans and maintains spray equipment, including stencil truck; place and pick up traffic cones during the operation of the striping machine.
• Prepares traffic signs.
• Applies sheeting to metal sign blanks for background color, numbering and lettering.
• Trim sign edges.
• Assists with street sign installation.
• Participates in the installation of raised pavement markers.
• Operates striping machine.

Street Sanitation Assignment

• Controls and remove litter.
• Removes drain outlet cover.
• Cleans storm drains and lines using hand and power tools.
• Under supervision, operates storm drain cleaning machines.

Marginal Functions
All Assignments:

• Receives and responds to public questions concerning current and projected work projects, location of streets, and directions.
• Changes backhoe buckets and teeth.
• Other duties as assigned.

TO VIEW JOB ANNOUNCEMENT, CLICK JOB PDF OR JOB ANNOUNCEMENT URL BELOW.

The Application Programmer performs or assists in the design, documentation, coding, testing, and implementation of new application programs or enhancements to existing application programs consistent with the Software Development Life Cycle (SDLC) best practices and applicable computer programming standards and frameworks. The position is primarily responsible for the suite of Bid-to-Bill applications as well as other business applications in use by the Agency. The position will work with other developer staff and supervisor during probationary status to learn and develop proficiency in the use of the Agency's software development frameworks, processes, and documentation design standards.

ESSENTIAL DUTIES AND RESPONSIBILITIES
This position requires that the incumbent reports for work on time and maintains satisfactory attendance in accordance with Agency policy; Ensures work responsibilities are covered when absent; Arrives to meetings and appointments on time; Performs special assignments as assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Level I: 
This classification is an entry-level position that is not expected to perform with the same level of independence of direction and judgment as higher levels. The level I works closely with other senior-level CTAs and is often given direction to complete tasks, install and troubleshoot hardware and software, perform system upgrades, evaluate and apply patches to systems, work closely with customers, and provide application support through help desk requests, and creates and maintains documentation.

Level II: 
This classification requires having all Level I duties and responsibilities with a minimum of two years of experience in software application development. Level II receives occasional direction and guidance from other senior-level CTAs; otherwise, uses developed experience and professional judgment to successfully complete projects in accordance with defined requirements and established timelines.

Responsibilities:
•    Within a specific hardware and operating system environment, work to define and design the operating features of new programs or enhancements
•    Produce appropriate conceptual-level application documentation for review and approval by the supervisor
•    Produce appropriate programming documentation for the review of the Supervisor, with sufficient detail on which to base programming activities
•    Develop computer programs in accordance with design documentation, closely following coding standards and conventions used within NCPA
•    Test applications using prescribed test methodology and tools
•    Develop an implementation plan, prepare production rollout for approval by the supervisor, and coordinate with the Ops team to execute the rollout
•    Maintain and enhance software applications
•    Conduct independent communications with user departments in a cooperative and professional manner
•    Provide emergency system support outside normal working hours as needed, on a rotational basis with other department employees
•    Travel to NCPA remote field sites to provide support to remote users as needed 
•    Assist in the evaluation of proposed new or modified computer system hardware and software

MINIMUM QUALIFICATIONS

Level I:
Education and/or Experience      
Bachelor's degree in Computer Science, Management Information Systems, Computer Engineering, or related field from an accredited four-year college or university and at least six months of related programming experience and training.

Level II:
Education and/or Experience      
Bachelor’s degree in Computer Science, Management Information Systems, Computer Engineering or related field from an accredited four-year college or university and at least two years of related programming experience and training. A minimum of two years in design and programming experience including some experience programming interactive programs. Experience must include exposure to systems analysis techniques.

KNOWLEDGE AND ABILITIES 
Knowledge:
Knowledge of VB.Net and/or C# as core programming language is essential; Integrated development environment (IDE) such as Microsoft Visual Studio; Source control management tools such as Team Foundation Server (TFS) and Git; JavaScript, HTML5, and Cascading Style Sheets (CSS) for developing web pages is highly desired; Oracle PL/SQL, SQL-Server T-SQL or similar SQL experience and understanding of relational database principles. Knowledge of software testing methodologies and tools, computer equipment and capabilities, data communications and local area networking, and client-server software is essential; Principles and programming techniques used to implement online interactive applications, technical report writing, systems analysis techniques, database management concepts, and management information system concepts; DevOps and related best practices; and knowledge of the Component-based Scalable Logical Architecture (CSLA) is an advantage.

Abilities:
Ability to write moderately complex programs and develop detailed program specifications; Demonstrate an understanding of MVC (Model-View-Controller; Stay up to date with related software development technologies through training, product research, and participating in conferences and user groups. Ability to work effectively with a broad, diverse cross-section of peers and various individual personalities; listen effectively, communicate with, and maintain a professional working relationship with co-workers; communicate clearly, efficiently, and professionally both over the phone and in person; Maintain strong organizational skills; and the ability to complete quality and timely work with minimal supervision.

SPECIAL REQUIREMENTS

Valid California Driver's License and insurance. 

This job has no supervisory responsibilities.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this Job, the employee is regularly required to sit and view and operate a computer, use hands to finger, handle, or feel, reach with hands and arms, and talk or hear. Requires manual finger dexterity and eye-hand coordination to operate and adjust office equipment such as computers. The employee is occasionally required to stand and walk. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, color vision, and the ability to adjust focus.

The noise level in the work environment is usually quiet.

All employees are responsible for contributing to an inclusive, safe, and secure work environment that values diverse cultures, perspectives, and experiences and is free from discrimination.

The City of Saratoga is currently recruiting to fill a full-time Accounting Technician position within the Administrative Services Department. The incumbent will report to the Finance Manager.

The Accounting Technician, under general supervision, performs journey-level technical and administrative account support duties associated with preparing, maintaining, and processing accounts receivable and accounts payable records and transactions. The incumbent’s duties include reconciling accounts and ledgers, preparing financial reports, batch runs and wire transfers, tracking and maintaining manual and computerized accounting and financial records, establishing and updating vendor records, and performing related duties as assigned. The incumbent will be assigned to the Accounts Payable and Program Procurement Support responsibilities.

The Technician will have knowledge of and proficiency in: Terminology and practices of financial and account document processing and record-keeping, including accounts receivable, accounts payable, utility billing, and business licensing; Methods and techniques or preparing and maintaining records of financial transactions; Methods and techniques of researching and resolving accounting transactional discrepancies; Business arithmetic and basic accounting and financial management knowledge; Record-keeping principles and procedures; Applicable federal, state, and local laws, codes, and ordinances relevant to the area(s) of responsibility; and related areas necessary to perform the essential functions of the position.

City offices operate on a 9/80 schedule. This position is located at City Hall, 13777 Fruitvale Avenue; operational hours are 7:30 am-5:00 pm.

View the complete job description here.

Final Filing Date:  First review of applications will be on June 7, 2024. NCPA reserves the right to close this posting once a sufficient number of applications have been received.
 

Under the direction of the IS Operations & Support Assistant Manager, the Database Administrator architects, tests, implements, maintains, and documents Agency databases. The database administrator collaborates closely with IS development and Agency operations personnel to provide backend database solutions for custom applications, including real-time, scheduling, and settlement programs. The database administrator troubleshoots and provides solutions for database problems.

Level III
This classification supports and maintains the Agency’s database infrastructure and related applications. Administers all database objects, including but not limited to schemas, tables, clusters, indexes, and views. Performs database re-organizations as needed to improve performance. Performs impact analysis of changes to be made to database objects before implementing significant schema changes. Ensures security for all databases by creating roles and associated privileges. Controls and monitors user access to databases. This is a journey-level position and is given minimal direction in job duties and responsibilities.  

Level IV
Architects and designs the Agency’s database infrastructure and ensures the highest levels of availability. Leads database projects to establish new database architectures. Oversees upgrades and implementations of new databases or related software.   Position can perform all lower level requirements and works independently with very little direction May be called upon to provide reports or present to the Agency’s Information Technology Committee. May direct the work of lower classifications.     

ESSENTIAL DUTIES AND RESPONSIBILITIES
This position requires that the incumbent reports for work on time and maintains satisfactory attendance in accordance with Agency policy; Ensures work responsibilities are covered when absent; Arrives to meetings and appointments on time; Performs special assignments for the Assistant Manager, Information Services or others as assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Responsibilities:
Design, create and maintain all Oracle databases required for development, testing, and production usage. 

Install, configure, upgrade, and troubleshoot Database server software for both stand-alone instances and Real Application Clusters (RAC). Includes patching both Oracle and Windows. 

Administer all database objects, including schemas, tables, clusters, indexes, views, sequences, constraints, packages, and procedures. This includes creating primary database storage structures (tablespaces) and primary objects (tables, views, indexes). Manage the sharing of resources between applications. 

Troubleshoot problems regarding the databases, servers, applications and development tools. Open technical support cases with support as needed and serve as primary support contact for NCPA. 

Perform capacity planning for all databases. Work closely with IS storage and system administration staff to plan and allocate database system storage. 

Experienced with creating, managing, and maintaining data warehouse technologies.

Perform ongoing monitoring and tuning of all database instances and Windows servers to optimize database performance and reliability. 

Plan and implement backup and recovery of Agency databases. Maintain remote standby databases using archive logs.

Implement and enforce security for all of the Databases through creating and maintaining users and roles, and assigning privileges. Control and monitor user access to the database. 

Perform database re-organizations as required to improve performance and ensure maximum uptime of the database. Modify the database structure from information given by application developers. Gather statistics, create indexes, create or expand tablespaces as needed. 

Perform SQL and PL/SQL tuning and performance monitoring. 

Set up and maintain documentation and standards for database practices and procedures. 

Provide technical support to application developers and database users. 

Perform impact analysis of changes to be made to database objects. Approve and implement/oversee significant schema changes and changes to database design. 

Provide support during non-standard hours (on an as-needed basis, on-call 24x7x365). 

Provide a strategic database direction for the organization.

MINIMUM QUALIFICATIONS

Level III:
Education and/or Experience
A bachelor’s degree from an accredited four-year college or university in Computer Science, Management Information Systems, Engineering, or a related field and five or more years of related experience and/or training, or an equivalent combination of education and experience.

Level IV: 
Education and/or Experience 
A bachelor’s degree from an accredited four-year college or university in Computer Science, Management Information Systems, Engineering, or a related field and eight or more years of related experience and/or training, or an equivalent combination of education and experience.

KNOWLEDGE AND ABILITIES 

Knowledge:
Knowledge of Oracle database; Oracle Recovery Manager (RMAN), Real Application Clusters (RAC); Oracle Automatic Storage Management (ASM), SQL, PL/SQL; Microsoft SQL Server; Windows; networking; virtual machines; batch/cmd scripting; PowerShell, SQL*Plus; Toad, GIT; physical database design; relational database theory; disaster recovery; back-up and recovery, relational database theory; Windows and Linux system administration; the Oracle optimizer and execution plans; troubleshooting and debugging, networking (TCP/IP), database security.

Abilities:
Ability to write complex programs and develop detailed program specifications; Ability to analyze data and situations, reason logically and creatively, identify problems, draw valid conclusions, and develop effective solutions; Ability to apply creative thinking in the design and development of methods of processing data with electronic computers; Ability to establish and maintain cooperative working relationships with those contacted in the course of the work; Ability to communicate effectively verbally and in writing, and prepare effective reports.

SPECIAL REQUIREMENTS

Valid California Driver's License and insurance as occasional travel may be required. 
While performing the duties of this job, the employee is regularly required to sit. The employee is occasionally required to stand and walk. Occasionally, the employee may be required to perform simple grasping and fine manipulation, use telephone, write or use a keyboard to communicate, crouch, crawl, reach and lift equipment up to 40 lbs. 

Level III: This job has no supervisory responsibilities. 

Level IV: This job may have supervisory responsibilities.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The noise level in the work environment is usually moderate.

All employees are responsible for contributing to an inclusive, safe, and secure work environment that values diverse cultures, perspectives, and experiences and is free from discrimination.
 

The Department of Transportation (DOT) plans, develops, operates, and maintains transportation facilities, services, and related systems which contribute to the livability and economic health of the City. We comprise a team of more than 500 people ready to serve the needs of our residents to improve the efficiency and safety of San José streets. We are an energetic and innovative team that is improving transportation in the nation's 10th largest city, while focusing on safety, sustainability, and active public life! For more information about DOT, visit www.sanjoseca.gov/transportation .

The Department of Transportation (DOT) is seeking to fill 16 full-time Maintenance Assistant positions.

The Maintenance Assistant total salary range is $24.74 to $31.56 hourly or $51,459.20 to $65,644.80 annually . The actual salary shall be determined by the final candidates' qualifications and experience.

The Infrastructure Maintenance Division of DOT is looking to fill 16 full-time vacant positions. These positions perform work in the maintenance and repair of concrete, pavement, sewers, landscaping, traffic signs, and traffic markings. Duties include digging holes, trenches, and ditches. They also operate a wide range of hand, mechanical, and power tools, as well as a variety of light and heavy vehicles, trucks, and equipment relevant to work performed, ensuring compliance with safe working practices. Maintenance crews provide services seven days a week. Individuals in this classification may be required to work alternate work shifts, including grave and swing, weekends, holidays, overtime, and on-call.

More information on the typical duties can be found in the Class Specifications for Maintenance Assistant .

Education: Completion of high school or equivalent (General Education Development [GED] Test or California Proficiency Certificate)

Experience: None.

Acceptable Substitutions: None.

Physical Requirements: Ability to perform the essential physical functions of this position will be determined by a post-offer medical examination conducted by the City of San José Employee Health Services.

Licenses or Certifications: Possession of a valid driver's license in the State of California is required. As a condition of employment in some designated positions, possession of a valid State of California Class A or B driver's license with applicable endorsements may be required. S elected candidates will be required to submit a DMV Release of Driver Record Information form at the time of conditional offer and will be enrolled in the DMV Employer Pull Notice (EPN) Program. Refusal to do so will be considered withdrawing from the recruitment process.