Search Jobs

The City currently has one (1) full-time vacancy for this position in the Public Works Department.

Applications will be reviewed at the following cutoffs: 

July 12, 2024

July 30, 2024

THE POSITION

Under general supervision, performs a wide variety of activities in the installation, inspection, maintenance and repair of irrigation systems and related equipment within City facilities; performs related work as required. An example of duties are:

• Performs daily inspection and preventive maintenance of the City’s irrigation systems; identifies any safety or repair issues.
• Installs, maintains and repairs irrigation systems; changes and adjusts sprinkler heads and maintains controllers; performs repairs on field irrigation computers, controllers, pumps, wiring, valves, pipes, and sprinklers.
• Monitors soil moisture and effectiveness of irrigation systems.
• Installs backflow devices; inspects and tests as necessary to ensure proper operation; certifies devices in compliance with regulatory requirements.
• Monitors and controls computerized irrigation systems.
• Works effectively with contractors on City-approved irrigation projects; seeks bids and/or estimates for proposed projects.
• Identifies, schedules, and supervises system repairs and installation of new irrigation systems; reviews plans and inspects installation of new irrigation systems; performs annual testing of systems.
• Performs Underground Service Alert (USA) markings as specified and according to accepted guidelines and requirements.
• Designs small irrigation systems.
• Plans and recommends materials needed for work projects; orders approved supplies and materials

MINIMUM QUALIFICATIONS

Any combination of training and experience which would provide the required knowledge, skills and abilities is qualifying. A typical way to obtain the required qualifications would be:

Equivalent to the completion of the twelfth (12th) grade

          AND

Two (2) years of responsible landscape/irrigation, public works or parks maintenance experience, including experience in design and/or maintenance of irrigation systems

License Requirements:

• A valid California Class C driver license or higher with a satisfactory driving record is required at the time of appointment. Individuals who do not meet this requirement due to a disability will be reviewed on a case-to-case basis.
• A Work Zone Traffic Control Safety Certificate issued by the International Municipal Signal Association (I.M.S.A.), or successful completion of the Traffic Control Technician-CA State Specific Training Course thru the American Traffic Safety Services Association is required within twelve (12) months of appointment.
• A certified Landscape Irrigation Auditor certificate is desirable.
• Possession of a Backflow Prevention Assembly Testers Certificate from either the American Water Works Association (AWWA), or the American Backflow Prevention Association (ABPA), or the Northern California Backflow Prevention Association (NCBPA), or equivalent is required within twelve (12) months of appointment.

The City of Lincoln is hiring for the position of Maintenance Worker I/II within the Streets Division of the Public Works Department.  Under general supervision, this position performs the full array of duties assigned to classes in the Maintenance Worker series including maintenance, construction and equipment operation work in one or more Public Works divisions; occasionally assists in the training of lower-level Maintenance Workers; and performs other related duties as required.

Maintenance Worker I

The Maintenance Worker I is the entry level class responsible for a wide variety of maintenance and construction tasks. This classification is alternatively staffed with Maintenance Worker II and incumbents may advance to the higher-level after gaining experience and demonstrating a level of proficiency that meets the qualifications of the higher-level class.

Maintenance Worker II

The Maintenance Worker II is the journey level class responsible for a wide variety of maintenance and construction tasks. This classification is distinguished from the next higher classification of Senior Maintenance Worker in that the latter performance the more complex assignments and lead responsibilities.

SUPERVISION RECEIVED/EXERCISED

The Maintenance Worker I receives general supervision from a Public Works Supervisor.  Incumbents of this class do not routinely exercise supervision.  The Maintenance Worker II receives general supervision from a Public Works Supervisor. May exercise technical and functional supervision over assigned staff. 

ESSENTIAL FUNCTIONS

Include but are not limited to the following:

• Performs maintenance, repair, construction, equipment operation and installation work in streets, water, sewers, refuse collection, parks and buildings.
• Streets: Breaks, removes, crack seals, hydropatches, and repairs surfaces; digs, shovels, hauls, loads and unloads materials; operates jack hammers, tampers, pavement breakers and other hand and power tools; rolls and irons asphalt; operates trucks, backhoes, rollers, pavers, street sweepers and other construction vehicles and equipment; assists in the installation and maintenance of City signs, road markings, striping and delineators; paints street lines and crosswalks; performs concrete sidewalk, curb, gutter and ramp installation and repair; installs, maintains and repairs street lights; installs shoring and trench plates; monitors underground service alert (USA’s) and marks when necessary; conducts street leaf pickup; mows roadsides.
• Water Distribution and Drainage: Constructs, maintains and repairs storm conduits, curbs, gutters and drainage facilities; installs, repairs and maintains water mains and lines; conducts maintenance at well sites; monitors pump stations; operates jack hammers and other tools and equipment; inspects tools and equipment for safety and mechanical defects; installs and repairs water service connections, meters and boxes; performs monthly meter reads; repairs, installs and tests hydrants; monitors USA’s and marks when necessary; operates trucks and other construction vehicles and equipment; locates and repairs leaks in water lines; cleans storm drains, flood control facilities and inlets; operates sewer camera and hydrovac.
• Parks and Buildings: Maintains lawns, shrubs, and trees; assists in spraying of herbicides and pesticides; cuts, sprays and removes weeds; clears brush and debris; assists with planting and maintenance of landscaped areas; installs, maintains, repairs and programs irrigation systems; cleans and maintains parks and city buildings; assists in the performance of minor carpentry, plumbing, electrical, painting and remodeling tasks.
• Solid Waste: Operates a variety of collection vehicles and equipment including front, rear and side loaders in the collection and transportation of residential and commercial refuse; drives to landfill site when vehicle is full and unloads material; evaluates and updates assigned routes; cleans, maintains and inspects assigned vehicles; maintains daily logs.
• Fills out reports and work orders; climbs or uses hydraulic aerial devices to top, trim, reshape, strip, treat and remove trees; operates airport fueling vehicles; responds to after-hours call-outs if assigned.
• Demonstrates a full understanding of applicable policies, procedures and work methods associated with assigned duties; may provide training to lower-level staff; responds to questions and concerns from the general public; provides information as is appropriate and resolves public service complaints.
• Responds to questions and concerns from the general public; provides information as is appropriate and resolves public service complaints.
• Establishes positive working relationships with representatives of community organizations, state/local agencies, City management and staff, and the public.

PHYSICAL, MENTAL AND ENVIRONMENTAL WORKING CONDITIONS

Position requires sitting, standing, walking on level and slippery surfaces, reaching, twisting, turning, kneeling, bending, stooping, squatting, crouching, grasping and making repetitive hand movement in the performance of daily duties. The position also requires both near and far vision when inspecting work and operating assigned equipment. The need to lift, carry and push tools, equipment and supplies weighing 25 pounds or more is also required. Additionally, the incumbent in this outdoor position works in all weather conditions including wet, hot and cold. The incumbent may use cleaning and lubricating chemicals, pesticides or herbicides which may expose the employee to fumes, dust and air contaminants. The nature of the work also requires the incumbent to climb ladders, use power and noise producing tools and equipment, operate hydraulic aerial devices, drive motorized vehicles and heavy equipment, work in heavy vehicle traffic conditions and often work with constant interruptions.

KNOWLEDGE/SKILLS/ABILITIES

The following are a representative sample of the KSA’s necessary to perform essential duties of the position:

Knowledge of: Practices, techniques and materials used in maintenance, construction and repair of streets, buildings, parks and water treatment facilities; knowledge of the City street system; applicable federal, state and local laws, codes and regulations; operating characteristics and safety requirements for operation of trucks, refuse vehicles and other heavy and light equipment; defensive driving; proper lifting procedures; methods and techniques for record keeping; basic principles of mathematics; occupational hazards and standard safety procedures.

Skill to: Safely and effectively operate a variety of maintenance equipment, tools and materials.

Ability to: Perform maintenance, repair and installation of asphalt, signs, concrete, water mains and storm drains; drive and operate trucks and heavy construction equipment; respond to issues and concerns from the community; interpret, explain and apply applicable laws, codes and regulations; operate a variety of construction equipment, vehicles and power and hand tools; perform heavy manual labor for extended periods of time; work at substantial heights; respond to after-hours call-outs if assigned; organize, prioritize and follow-up on work assignments; work independently and as part of a team; make sound decisions within established guidelines; analyze a complex issue, and develop and implement an appropriate response; follow written and oral directions; observe safety principles and work in a safe manner; communicate clearly and concisely, both orally and in writing; establish and maintain effective working relationships.

THE SELECTION PROCESS

The process may include an in-basket exercise, individual interviews, panel interviews and/or other related components.  Only those candidates who have the best combination of qualifications in relation to the requirements and duties of the position will continue in the selection process. Meeting the minimum qualifications does not guarantee an invitation to the process. The candidate selected for the position will be required to complete a background check including reference checks, fingerprint check, medical/drug-test evaluation and/or other related components.

Human Resources will make reasonable efforts in the examination process to accommodate persons with disabilities.  Please advise HR of any special needs a minimum of five days in advance of the selection process exam by calling (916) 434-3229. The City of Lincoln is an Equal Opportunity Employer.

The information contained herein is subject to change and does not constitute either an expressed or implied contract.

Located in Middletown, CA!

The Mechanic Operator position consists of five levels of competency.  Individuals can either enter into the classification at the beginning level of the job or somewhere between the entry level and the top step depending on the qualifications brought with them.  It is the expectation of NCPA that all employees progress to the top level.  In order to progress to the top level an employee must complete all components in a competency level within the associated training matrix.  Employees who successfully complete a training level matrix and who received a rating of “meets requirements” or higher by their immediate supervisor will be promoted when qualified.  Upon completion/demonstration of competencies employees will be expected to perform work in all completed levels and other job-related duties as required. All employees have the right to challenge any component in the training matrix by proving proficiencies verbally and practically.

General Scope of the Job
Under general supervision of the Mechanical Maintenance Supervisor and at times under the general direction of the Mechanic Operator Lead Person; to maintain, repair, adjust, install, and test, powerplant steam field, water injection systems and equipment and maintain lease site grounds.  The measure of accuracy and reliability is the safe, effective and efficient performance of the Facilities.  This position is predominately mechanic based with operation support as outlined below.

Description of Duties and Responsibilities
Level III:
This level of the Mechanic Operator position requires the completion of all Level III training requirements. The employee must perform the duties as described below and as defined in lower levels while attaining Level IV skills and experience through academic and hands-on training. Level III knowledge and skills focus on journey level mechanical duties and responsibilities.
•    Inspects, tests, calibrates, installs, rebuilds, adjusts, repairs and aligns all mechanical equipment such as hydraulic control systems, turbines, generators, cooling tower, pumps, electric motors, valves, gear reducers, compressors, blowers heat exchangers, HVAC systems excluding refrigerant replacement, fire protection systems, diesel and gas engines, mufflers, separators, traps, rock catchers, tanks, pipeline and pipe supports.
•    Maintains facility structures. 
•    Performs basic inspections and repairs various rigging equipment, fixtures and cranes.
•    Assists the scaffolding qualified journeyman in maintaining, and repairing scaffolding. 
•    Inspects and maintains safety devices such as harnesses and rescue equipment.
•    Works with Safety Manager to maintain records of regulated equipment.
•    Keeps accurate records of equipment history, reports and work orders on computer for CMMS.  Works with CMMS personnel for accuracy and reliability.
•    Performs preventative maintenance and assessments on various plant equipment.
•    Writes Work/Operating Procedures within area of expertise.
•    Requisitions replacement parts and supplies to carry out assigned tasks.
•    Makes working drawings of components and changes made to Plant systems relative to area of expertise.
•    Installs, inspects, tests, repairs, rebuilds, and maintains equipment such as portable and fixed site pumps, valves, mufflers, separators, traps, rock catchers, turbines, generators, motors, gear reducers, compressors and hydraulic control systems, pipelines, tanks, pipeline supports, effluent piping components.
•    Maintains lease site grounds structures, culverts, roads, drains and ditches.
•    Examines and diagnoses malfunctions or defective equipment on pumps, motors, valves, separators, vents, air vacuum breakers and compressors; disassembles/reassembles, overhauls and adjusts defective equipment
•    Installs, fits and calibrates equipment replacement parts.  Observes equipment operation.  Adjusts equipment to operational specifications using specialized tools and precision measuring instruments.
•    Disassembles, removes, repairs, replaces, assembles and aligns pipes, pipeline components, and valves repairing or replacing broken and worn parts using various hand tools.
•    Observes and directs contractors while digging trenches, cleaning tanks and maintaining lease site grounds.
•    Under the direction and training of operations, assists with clearances on steam field and effluent pipeline equipment for maintenance purposes.
•    Will be trained to Rig and lift equipment to install, repair or replace equipment.
•    Instructs and trains workers in repair and maintenance procedures of steam field, power plant and effluent pipeline equipment.
•    Maintains inventory of tools and materials for the maintenance work at the steam field and effluent pipeline.
•    Maintains steam field equipment records on work completed on CMMS or equivalent maintenance program.
•    Assists other classifications when needed.
•    Performs other job-related duties as required.
•    Acquire OSHA certified training to meet business needs.
•    Trains and advises other workers in the maintenance and operation of steam field and effluent pipeline equipment.
•    Maintains and repairs Hydraulic Control Systems.

Level IV:
This level of the Mechanic Operator position requires the completion of all Level IV training requirements for operational duties and responsibilities.  The employee must perform the duties as described below and as defined in lower levels while attaining Level V skills and experience through academic and hands-on training.
•    Reviews, coordinates and reports work orders, work activities and equipment clearances with appropriate personnel.  
•    Checks equipment to be cleared in advance to guarantee its condition to others.  Informs Operator Technician Lead Person and Supervisors of the status of equipment and systems.  
•    Under direction of the Operator Technician Lead Person or a designee, operates various equipment and performs basic equipment clearances on low voltages (<600 volt) electrical breakers, steam line equipment and effluent equipment.  
•    Terminates and connects motor wiring to facilitate bearing repairs (less than 600 volts.).
•    Conducts online test of equipment before certifying its status and performance.

Machinist Duties and Responsibilities
•     Sets up and operates machine tools to repair or reproduce equipment parts and fittings working from blueprints or defective parts using precision tools and measuring instruments.
•    Fabricates special tools, rigging equipment and replacement parts to repair equipment.   
•    Fabricates, modifies, shapes and repairs equipment parts using a variety of metal working machines.
•    Chips, grinds, bores, and drills equipment parts.
•    Verifies conformance of finished work piece to specifications, using precision measuring instruments.
•    Calibrates, fits and assembles equipment parts according to drawings and specifications using machine tools, power tools, and measuring instruments.
•    Installs machined replacement parts; starts and observes equipment operation to detect malfunctions or out-of-tolerance performance, adjusts as necessary.
•    Maintains shop equipment and tools.
•    Maintains inventory of machining tools.

Representative Physical and Job Demands
•    Regularly talks and listens to others to exchange and obtain information to direct the operation and maintenance of Geothermal Facility steam field and effluent equipment.
•    Regularly reaches, grasps, pushes and pulls various wrenches, hand tools, and other objects using manual dexterity and eye hand coordination to operate and maintain equipment.
•    Regularly climb ladders and walks on platforms near high temperature surfaces; works on slippery or uneven surfaces in precarious places.
•    Frequently walks, reaches, kneels and crouches using feet, legs, hands and manual strength to access and operate plant equipment.
•    Occasionally lifts and moves pumps motors and pipe weighing up to 50 pounds.
•    Routinely works near heated surfaces; works on slippery or uneven surfaces in precarious places to adjust or operate equipment.
•    Occasionally exposed to high voltage and other electrical hazards while working on equipment.
•    Routinely works in outside weather conditions and is exposed to chemicals, wet and humid conditions, extreme cold and heat while inspecting and maintaining equipment.  The noise level is frequently very loud.
•    Routinely listens to operating sounds of equipment to diagnosis equipment malfunctions.
•    Frequently operates forklifts cranes, air compressors, sandblasters and power tools to maintain and repair equipment.
•    Frequently operates Agency vehicles going to and from job locations.

Job Expectations
Acquisition and Use of Technical Knowledge
•    Possesses or acquires as needed the ability to detect, diagnose disassemble and repair steam and water equipment with a fundamental knowledge of; turbine equipment, and auxiliary systems and their capabilities; operation processes, mechanical and electrical theory and background to operate equipment; measuring devices and hand tools for maintenance work; general contamination and control practices and procedures; basic math, geothermal powerplant rules and regulations; clearance procedures, physics including pump mechanics; basic principles of thermodynamics and fluid flow.  Given this basic knowledge, understands own role within the plant and how that role requires the use of knowledge applied to practical, day to day, operations and maintenance demands.  Hold self-accountable to acquire knowledge that may be needed when a job situation changes, new tasks are introduced to the job, or when improved performance requires acquiring extended or specialized information.
•    Possesses or acquires as needed an extensive knowledge of safety, fire, and security rules and procedures.  Given the emphasis of safety at the plant, uses knowledge to improve plant conditions and the organization’s safety record.
•    Acquires knowledge of operations and maintenance procedures on a continuing basis to stay current as a significant contributor to plant solutions, safety performance, and operations and maintenance improvements.
•    Confers with Operator Technician Lead Person or Operations Supervisor to resolve system problems and offers a variety of workable solutions to complex problems and report status of systems and equipment.  
•    Identifies problems or trends with systems and equipment early to prevent operator or electrical errors. 
•    Passes knowledge on to other employees as a way to contribute to the performance of others, or get a job done.
•    Assesses own limitations with the fundamental knowledge needed to perform in the job.

Application of Technical and General Job Skills
Technical and job skills are indicated by demonstrating an ability to:
•    Efficiently and effectively operate, control, and maintain equipment, and be accountable for aspects of the job at the Geothermal Facility. 
•    Implement or use existing methods to control the waste of time, money and material resources, such as:
o    Acting to improve work procedures 
o    Conserving resources 
o    Expediting a job
o    Completing a work assignment efficiently
o    Completing long term work in an orderly fashion
•    Work with management to identify and learn from mistakes made and apply what is learned to future situations or plant conditions.
•    Establish and maintain effective work relationships with those contacted in the performance of required duties.
•    Review own action to determine the cause of poor working relationships so those relationships can be improved
•    May be required to work extended hours and on normal days off.
•    Operate Agency vehicles and equipment safely.

Training and Experience Requirements
Level III: Completion of the NCPA Level III training program or three years of equivalent journey-level mechanical experience.
Level IV: Completion of the NCPA Level IV training program or three years of equivalent journey-level mechanical experience and operations experience.

Driver’s License Requirement
Possession of an unrestricted Class C California operator’s license issued by the State of California, Department of Motor Vehicles.  Possession and maintenance of a good driving record as demonstrated by the absence of multiple or serious traffic violations or accidents within the last three (3) years.

Desired Qualifications 
•    Possession, or ability to obtain with training, a Class A California operator’s license issued by the State of California Department of motor Vehicles.
•    Ability to set up and operates machine tools to repair or reproduce equipment parts and fittings working from blueprints or defective parts using precision tools and measuring instruments.
•    Ability to Fabricate special tools, rigging equipment and replacement parts to repair equipment.   
•    Ability to Fabricate, modifies, shapes and repairs equipment parts using a variety of metal working machines.
•    Chips, grinds, bores, and drills equipment parts.
•    Verifies conformance of finished work piece to specifications, using precision measuring instruments.
•    Calibrates, fits and assembles equipment parts according to drawings and specifications using machine tools, power tools, and measuring instruments.
•    Installs machined replacement parts; starts and observes equipment operation to detect malfunctions or out-of-tolerance performance, adjusts as necessary.

EOE

The Application Programmer performs or assists in the design, documentation, coding, testing, and implementation of new application programs or enhancements to existing application programs consistent with the Software Development Life Cycle (SDLC) best practices and applicable computer programming standards and frameworks. The position is primarily responsible for the suite of Bid-to-Bill applications as well as other business applications in use by the Agency. The position will work with other developer staff and supervisor during probationary status to learn and develop proficiency in the use of the Agency's software development frameworks, processes, and documentation design standards.

ESSENTIAL DUTIES AND RESPONSIBILITIES
This position requires that the incumbent reports for work on time and maintains satisfactory attendance in accordance with Agency policy; Ensures work responsibilities are covered when absent; Arrives to meetings and appointments on time; Performs special assignments as assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Level I: 
This classification is an entry-level position that is not expected to perform with the same level of independence of direction and judgment as higher levels. The level I works closely with other senior-level CTAs and is often given direction to complete tasks, install and troubleshoot hardware and software, perform system upgrades, evaluate and apply patches to systems, work closely with customers, and provide application support through help desk requests, and creates and maintains documentation.

Level II: 
This classification requires having all Level I duties and responsibilities with a minimum of two years of experience in software application development. Level II receives occasional direction and guidance from other senior-level CTAs; otherwise, uses developed experience and professional judgment to successfully complete projects in accordance with defined requirements and established timelines.

Responsibilities:
•    Within a specific hardware and operating system environment, work to define and design the operating features of new programs or enhancements
•    Produce appropriate conceptual-level application documentation for review and approval by the supervisor
•    Produce appropriate programming documentation for the review of the Supervisor, with sufficient detail on which to base programming activities
•    Develop computer programs in accordance with design documentation, closely following coding standards and conventions used within NCPA
•    Test applications using prescribed test methodology and tools
•    Develop an implementation plan, prepare production rollout for approval by the supervisor, and coordinate with the Ops team to execute the rollout
•    Maintain and enhance software applications
•    Conduct independent communications with user departments in a cooperative and professional manner
•    Provide emergency system support outside normal working hours as needed, on a rotational basis with other department employees
•    Travel to NCPA remote field sites to provide support to remote users as needed 
•    Assist in the evaluation of proposed new or modified computer system hardware and software

MINIMUM QUALIFICATIONS

Level I:
Education and/or Experience      
Bachelor's degree in Computer Science, Management Information Systems, Computer Engineering, or related field from an accredited four-year college or university and at least six months of related programming experience and training.

Level II:
Education and/or Experience      
Bachelor’s degree in Computer Science, Management Information Systems, Computer Engineering or related field from an accredited four-year college or university and at least two years of related programming experience and training. A minimum of two years in design and programming experience including some experience programming interactive programs. Experience must include exposure to systems analysis techniques.

KNOWLEDGE AND ABILITIES 
Knowledge:
Knowledge of VB.Net and/or C# as core programming language is essential; Integrated development environment (IDE) such as Microsoft Visual Studio; Source control management tools such as Team Foundation Server (TFS) and Git; JavaScript, HTML5, and Cascading Style Sheets (CSS) for developing web pages is highly desired; Oracle PL/SQL, SQL-Server T-SQL or similar SQL experience and understanding of relational database principles. Knowledge of software testing methodologies and tools, computer equipment and capabilities, data communications and local area networking, and client-server software is essential; Principles and programming techniques used to implement online interactive applications, technical report writing, systems analysis techniques, database management concepts, and management information system concepts; DevOps and related best practices; and knowledge of the Component-based Scalable Logical Architecture (CSLA) is an advantage.

Abilities:
Ability to write moderately complex programs and develop detailed program specifications; Demonstrate an understanding of MVC (Model-View-Controller; Stay up to date with related software development technologies through training, product research, and participating in conferences and user groups. Ability to work effectively with a broad, diverse cross-section of peers and various individual personalities; listen effectively, communicate with, and maintain a professional working relationship with co-workers; communicate clearly, efficiently, and professionally both over the phone and in person; Maintain strong organizational skills; and the ability to complete quality and timely work with minimal supervision.

SPECIAL REQUIREMENTS

Valid California Driver's License and insurance. 

This job has no supervisory responsibilities.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this Job, the employee is regularly required to sit and view and operate a computer, use hands to finger, handle, or feel, reach with hands and arms, and talk or hear. Requires manual finger dexterity and eye-hand coordination to operate and adjust office equipment such as computers. The employee is occasionally required to stand and walk. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, color vision, and the ability to adjust focus.

The noise level in the work environment is usually quiet.

All employees are responsible for contributing to an inclusive, safe, and secure work environment that values diverse cultures, perspectives, and experiences and is free from discrimination.

Applications will be reviewed at the following cutoffs: 

June 3, 2024

June 24, 2024

THE POSITION

The City of Rocklin is looking for two Maintenance Workers to assist in the Parks Division of the Parks and Recreation Department. The Maintenance Worker is a temporary position and incumbents work on an as-needed basis, not to exceed 28 hours per week and up to 999 hours per fiscal year. Temporary employment does not provide any guarantee of continued employment and the City of Rocklin may end the assignment at any time. Temporary employees are not eligible for any other benefits except where required by law, and there is no guarantee of future permanent employment.

An example of duties are:

• Performs flood control measures by clearing creeks of obstructions, keeping drains clean and clear, and preparing sandbags in case of emergency.
• Performs crack sealing of asphalt, and backfilling trenches and excavations on City streets; performs repair, maintenance, and construction of sidewalks, curbs, and gutters.
• Removes concrete, builds forms, pours concrete, and performs other concrete work around City buildings as required.
• Empties trash cans, picks up and removes debris, litter, and trash from parks, athletic fields, trails, and landscaped areas throughout the City; removes graffiti and other unwanted markings from City-owned property.
• Plants, mows, prunes, and maintains turf, trees, shrubs, and plants; clears sites of weeds.
• Performs construction and repair of landscapes and other park facilities such as installing and maintaining signs, installing park structures, and installing and maintaining fences.
• Paints or stains and pressure washes and cleans park amenities and fencing.
• May apply pesticide, herbicide and other pest management treatments to vegetation and landscaped areas.
• Makes minor adjustments on service equipment; maintains tools and equipment in working order.
• Operates trucks, trailers, and other automotive equipment as required.
• Maintains logs of daily activities.
• Performs related duties as assigned.

MINIMUM REQUIREMENTS

Equivalent to graduation from high school
AND
Three (3) months of experience as a laborer in construction, maintenance, or landscaping work 

Licenses and Certifications

• Possession of, or ability to obtain and maintain, a valid California Class C Driver License and a satisfactory driving record is required. Individuals who do not meet this requirement due to a disability will be reviewed on a case-by-case basis.

The position is responsible for the performance of both the day-to-day power settlements among NCPA members, Western, California, and Federal electricity markets, local balancing authority area operators (CAISO, BANC, EIM), as well as settlement activities associated with NCPA Power Management’s Service Customers. Other responsibilities include tracking and meter data management validation duties, GHG (Greenhouse Gas) monitoring and analysis, analysis and testing associated with new CAISO market initiatives, and comprehensive analytic or technical studies, as required, including proceedings before state and federal regulatory agencies and public officials. This is a full journey-level position capable of performing all the duties and responsibilities of the Settlements Analyst I. Performs the full range of duties as assigned, receiving only occasional instruction, training, or assistance as new or unusual situations arise. Additionally, incumbents perform a variety of assigned complex technical and professional work in the areas of power accounts settlements, budgeting, systems development, and audit. Incumbents also provide technical analysis and assistance to staff, Members, contractual participants, and others, as required.

ESSENTIAL DUTIES AND RESPONSIBILITIES
This position requires that the incumbent report for work on time and maintain satisfactory attendance in accordance with Agency policy; Ensures work responsibilities are covered when absent; Arrives to meetings and appointments on time; Performs special assignments as assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.

Responsibilities:
Provides technical advice, functional instruction, and guidance to less experienced Power Settlement staff as needed. Trains new Power Settlements Analysts and cross trains as roles evolve. Recommends personnel actions. Prepares and presents training/tutorials on All Resources Bill, Pre-Bill process, Power Settlement processes overall, and various other topics, as needed, in person or via webinars (s) to NCPA Members and Project Participant staff.

Serves as subject matter expert, working with Information Services, on Power Settlements application requirements, such as All Resources Bill enhancements, and testing system enhancements in development.

Implements and operates complicated power settlements systems. Prepares complex analytical reports and supporting documentation.

Provides analysis, integration, and implementation of new energy market initiatives and/or customers/Scheduling Coordination accounts (e.g., ISO, Western Energy Imbalance Market (“EIM”), renewable generating resources, Community Choice Energy/Aggregators (“CCE”).

Monitors settlements associated with Renewable Energy Credits and acts as or provides support to NCPA’s Qualified Reporting Entity representative; registers credits on the Western Renewable Energy Generation Information System (“WREGIS”) or its successor.

Monitors settlements functions of Western capacity and energy allocations, market purchases and sales, Pool transmission activity, and other transactions as they occur; Prepares or reviews power settlement transactions for proper budget classification.

Conducts special studies requiring complex, voluminous, and detailed analysis of power costs and revenues. Recommends operational changes that provide better value to Members and Participants.

Coordinates and participates in the development, analysis, and monitoring of the Agency's power supply budgets. Acts as power settlements representative to other department managers and supervisors in regard to cost summary and budgetary reports.

Assists with the implementation of systems, policies, and procedures and special projects requiring highly technical study and analyses. Recommends changes or modifications to methods or systems as applicable.

Assists with formal budget and other presentations to upper management and the governing body.
Performs special assignments for the Power Settlements Supervisor or others as assigned, including preparation of testimony and exhibits for presentation before state and national regulatory proceedings.

MINIMUM QUALIFICATIONS

Education and/or Experience
Bachelor's degree (B. A.) from a four-year college or university with an emphasis on quantitative analysis, plus four (4) years of prior experience as a Power Settlements Analyst I or an equivalent combination of education and experience.

KNOWLEDGE AND ABILITIES 
Knowledge:
Knowledge of California Independent System Operator settlements procedures for tariff services and Metered Subsystem services; NCPA settlements procedures for scheduling coordinator services and the ten-member power pool; California Energy Imbalance Markets; NCPA’s Western (WAPA) contracts
California’s Green House Gas rules; CARB renewable energy credits; Knowledge of NCPA settlements procedures for scheduling coordinator services and the ten-member power pool.

Abilities:
Ability to retrieve detailed records and summary-level data from NCPA’s Oracle database systems through the use of Structured Query Language (“SQL”) statements in proprietary software (e.g., SAS, Toad, SQL Developer, Oracle Database Connection [“ODBC”]) and process through proprietary or open-source software programming applications (e.g., SAS, Visual Basic for Applications [“VBA”], R, Python, Excel workbooks); Ability to read, analyze, and interpret CAISO tariff, NCPA operating agreements, and contracts, standard industry power purchase agreements, technical procedures, and governmental regulations; Ability to write reports, business correspondence, and procedure manuals; Ability to present information effectively and respond to questions from groups of managers, clients, customers, and the general public; and the Ability to analyze and interpret settlement formulas expressed in summation notation.

SPECIAL REQUIREMENTS

Valid California Driver's License and insurance. 

This job has no supervisory responsibilities.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is frequently required to stand; sit; use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee is occasionally required to walk; climb or balance; stoop, kneel, crouch, or crawl, and taste or smell. The employee must occasionally lift and/or move up to 10 pounds. Specific vision abilities required by this job include close vision, distance vision, depth perception, and the ability to adjust focus.

The noise level in the work environment is usually moderate.

All employees are responsible for contributing to an inclusive, safe, and secure work environment that values diverse cultures, perspectives, and experiences and is free from discrimination.
 

This position is open until filled. The first review of applications is January 29, 2024.

*Effective July 2024, this position will receive a 2.5% base salary increase.

THE POSITION

The City of Rocklin is looking for a seasoned IT professional with a passion for leading teams, driving innovation, and transforming City services through technology. The IT Manager will play a pivotal role in shaping and executing the City's strategies and ensuring alignment with the City's mission and objectives. This position will oversee and mentor a team of skilled IT professionals, fostering a collaborative and high-performing culture, but also actively participating in the day-to-day operational tasks and responsibilities of the team.

The IT Manager will be responsible for the following upcoming projects:

• Developing a strategic plan for the IT division to foster transparency, increase operational efficiency, improve staff satisfaction, and to bolster trust.
• Replacing the outdated document management and retention system.
• Investing in technology that supports economic development efforts.

An example of duties are:

• Manages, directs, and organizes projects, activities, and resources for the IT Division, including but not limited to networks, servers, workstations, hardware and software utilized throughout the City, IoT, mobile and telephony infrastructure, security systems, data transmission, telecommunication systems, Geographic Information Systems and full IT support for all areas in public safety.
• Assists the Director of Administrative Services or the Deputy Director of Administrative Services in developing and implementing goals, objectives, policies, and work standards for the City of Rocklin departments and procedures for IT governance, security, and administration.
• Participates in the development and administration of the division budget.
• Plans, organizes, supervises, and evaluates the activities of professional, technical and administrative staff; develops and manages the IT division staff including hiring, education, and training; reviews and evaluates job performance and effectively recommends personnel actions.

MINIMUM QUALIFICATIONS

Possession of a bachelor’s degree from an accredited four-year college or university with major coursework in Computer Science, Information Technology, Management Information Services or a closely related field;

AND

Eight (8) years of increasingly responsible infrastructure and enterprise applications management experience in an IT environment consisting of multiple platforms, large-scale applications with multiple operating systems which included a minimum three (3) years of supervisory experience.

Licenses and Certifications

• Possession of, or ability to obtain and maintain, a valid California Class C Driver License and a satisfactory driving record is required. Individuals who do not meet this requirement due to a disability will be reviewed on a case-by-case basis.
• Microsoft Certified System Engineer (MCSE), VMware Certified Professional (VCP), or Project Management Professional (PMP) certifications are highly desirable.

This position receives a 2.5% pay differential in recognition of confidential status. 

THE POSITION

This position is focused on coordinating and monitoring information technology operational systems for the City including analyzing, diagnosing, maintaining, and troubleshooting assigned system areas such as applications, operating systems, and database systems. This position has a wide breadth of responsibility and is the backbone for ensuring the City’s technology systems always stay up and running. An example of duties are:

• Performs configuration, modification, testing and implementation of vendor software; develops, coordinates and implements plans to test business and functional processes during system development and quality assurance testing.
• Assists with the installation of new and existing software; ensures training of staff in the use of new and existing software.
• Conducts systems analysis; develops business and technical requirements; designs functional and technical specifications; writes source code; tests applications.
• Assists with the planning and coordination of migrations from legacy systems and the implementation of ongoing maintenance of new computer systems.
• Performs technical and functional troubleshooting and on-call support; installs and tests upgrades and system patches; tracks problems and requests for system enhancements and upgrades and resolve problems as they occur.
• Installs, configures, and maintains SQL server, including capacity planning, installation and configuration of SQL management tool and client uses.
• Provides support for specific department applications; tests programs and applications from user’s perspective.
• Coordinates, develops, and performs data export and import routines between applications.
• Acts as a technical resource for staff; identifies and suggests alternatives and recommends process changes through information systems; assists in identifying potential and required changes to business processes and/or procedures.
• Performs related duties as assigned.

MINIMUM QUALIFICATIONS

Any combination of training and experience that would provide the required knowledge, skills, and abilities is qualifying. A typical way to obtain the required qualifications would be:

Equivalent to a bachelor’s degree with major coursework in MIS, business, management, or a closely related field;

AND

Four (4) years of progressively responsible professional experience in computer technology.

Technical certifications are highly desirable.

Licenses and Certifications

A valid California Class C driver license or higher with a satisfactory driving record is required at the time of appointment. Individuals who do not meet this requirement due to a disability will be reviewed on a case-by-case basis.

The City of Lincoln is creating an applicant pool for the position of Public Safety Dispatcher I/II within the Police Department.  Interested applicants may submit their application to be part of the applicant pool.  As new vacancies occur, the recruitment team will review applications for consideration.

The Lincoln Police Department is authorized for 23 sworn officers, six dispatchers, and various other civilian and volunteer positions.  The dispatch center provides public safety dispatch services for the Lincoln Police Department and three Lincoln Fire stations. The communications center is staffed 24/7 and dispatchers work in pairs or solo. Public safety dispatchers answer emergency and non-emergency calls for police, fire and other city services.  Dispatchers prioritize calls and dispatch public safety units as needed.  Heavy phone and radio use is a primary duty of the position.  Other duties include clerical and specialized record keeping functions.

Under immediate supervision, this position performs a wide variety of technical and clerical law enforcement support duties related to taking police, fire and medical emergency requests for service from the public and tracks and dispatches field units as appropriate; gathers, records, maintains, retrieves and distributes law enforcement data and information; enters reports and data into a variety of automated law enforcement records systems; ensures that records and information are accurate, clear and comprehensive for law enforcement personnel and the general public; learns applicable policies, procedures and work methods associated with assigned duties; performs other related duties as required.

DISTINGUISHING CHARACTERISTICS
The Public Safety Dispatcher I is the entry level class in which incumbents learn to perform and perform Police Dispatcher duties under immediate supervision. This classification is alternatively staffed with Public Safety Officer II and incumbents may advance to the higher level after gaining experience and demonstrating a level of proficiency that meets the qualifications of the higher class.

The Public Safety Dispatcher II is the working level class in which incumbents are expected to perform the full range of Police Dispatcher duties with minimum supervision and apply sound judgment regarding their scope of authority in dispatching personnel. This classification is distinguished from the Community Service Officer series in that the latter performs duties involving work in taking reports in the field and performing face-to-face public service activities.

SUPERVISION RECEIVED/EXERCISED
The Public Safety Dispatcher I receives immediate supervision from the Police Office Supervisor or a Watch Commander. Incumbents of this class do not routinely exercise supervision. The Public Safety Dispatcher II receives supervision from the Police Office Supervisor or a Watch Commander. Incumbents of this class do not routinely exercise supervision.

ESSENTIAL FUNCTIONS
Include but are not limited to the following:

• Receives and enters calls for police, fire and medical service in CAD; dispatches and tracks field units; interprets level of service needed through information obtained from field officers or citizens; coordinates multi-agency responses when necessary; transfers calls to appropriate agencies if warranted.
• Responds to questions and concerns from the general public, department staff and other agencies; takes and records telephone and counter reports; provides information as appropriate and resolves service issues and complaints.
• Enters and maintains accurate data and information into the California Law Enforcement Telecommunications System (CLETS) including stolen vehicles, and missing and unidentified persons; enters and retrieves information from a variety of state and local automated systems; validates selected records from the Department of Justice files including vehicles, boats and missing persons; releases impounded vehicles; processes reports and citations; collects and maintains statistical information.
• Learns and develops an understanding of applicable policies, procedures, and work methods associated with assigned duties.
• Photocopies and distributes crime, incident, arrest and accident reports to the general public and various agencies such as the Department of Justice (DOJ), California Highway Patrol, District Attorney, Department of Motor Vehicles (DMV) and insurance companies; prepares reports for court; applies federal, state and local laws when releasing information.
• Establishes positive working relationships with representatives of community organizations, state/local agencies and associations, City management and staff, and the public.

PHYSICAL, MENTAL AND ENVIRONMENTAL WORKING CONDITIONS
This position requires prolonged sitting, standing, walking, reaching, twisting, turning, kneeling, bending, squatting, and stooping in the performance of daily office activities. The position also requires grasping, repetitive hand movement, and fine coordination in preparing reports and retrieving and entering data using a computer keyboard. Additionally, the position requires near and far vision in reading work related documents and using the computer, and acute hearing is required when providing phone, dispatch and face to face service. The need to lift, drag, and push files, paper, and documents weighing up to 25 pounds also is required.

KNOWLEDGE/ABILITIES/SKILLS
The following are a representative sample of the KAS’s necessary to perform essential duties of the position. The level and scope of the knowledge and abilities listed below vary between the I and II levels.

Knowledge of: Civil, criminal, and municipal provisions relating to the various activities of the Police Department; law enforcement, fire, and other operating procedures and functions of the Department as they relate to the dispatch function; geography of the City and the surrounding environment; legal and procedural techniques and regulations regarding transmission and reception of public safety radio traffic; basic radio and related equipment maintenance.

Ability to: Perform a variety of complex work with speed and accuracy; remain calm under emergency situations; learn to operate specialized law enforcement automated information and communication systems; work flexible hours including evenings, weekends and split shifts; learn basic Spanish speaking skills that allow for communication regarding addresses, locations, time descriptions, etc.; interpret, explain and apply applicable laws, codes and regulations; read, interpret and record data accurately; organize, prioritize and follow-up on work assignments; work independently and as part of a team; make sound decisions within established guidelines; follow written and oral directions; observe safety principles and work in a safe manner; communicate clearly and concisely, both orally and in writing; establish and maintain effective working relationships.

Skill to: Operate an office computer and a variety of word processing and software applications; effectively operate specialized law enforcement automated information and communication systems; type accurately from clear copy at a rate of 35 words per minute.

THE SELECTION PROCESS

To be considered, candidates must possess one of the following at the time of application:

• POST Entry-Level Dispatcher Exam with a T-score of 48 or higher
• A valid POST-certified Public Safety Dispatcher Basic Course Certificate

The process may include an in-basket exercise, individual interviews, panel interviews and/or other related components.  Only those candidates who have the best combination of qualifications in relation to the requirements and duties of the position will continue in the selection process. Meeting the minimum qualifications does not guarantee an invitation to the process. The candidate selected for the position will be required to complete a background check including reference checks, fingerprint check, medical/drug-test evaluation and/or other related components.

Human Resources will make reasonable efforts in the examination process to accommodate persons with disabilities.  Please advise HR of any special needs a minimum of five days in advance of the selection process exam by calling (916) 434-3229. The City of Lincoln is an Equal Opportunity Employer.

The information contained herein is subject to change and does not constitute either an expressed or implied contract.

TO VIEW THE JOB ANNOUNCEMENT, CLICK 'JOB URL OR JOB PDF' BELOW