Search Jobs

Located in Middletown, CA!

The Mechanic Operator position consists of five levels of competency.  Individuals can either enter into the classification at the beginning level of the job or somewhere between the entry level and the top step depending on the qualifications brought with them.  It is the expectation of NCPA that all employees progress to the top level.  In order to progress to the top level an employee must complete all components in a competency level within the associated training matrix.  Employees who successfully complete a training level matrix and who received a rating of “meets requirements” or higher by their immediate supervisor will be promoted when qualified.  Upon completion/demonstration of competencies employees will be expected to perform work in all completed levels and other job-related duties as required. All employees have the right to challenge any component in the training matrix by proving proficiencies verbally and practically.

General Scope of the Job
Under general supervision of the Mechanical Maintenance Supervisor and at times under the general direction of the Mechanic Operator Lead Person; to maintain, repair, adjust, install, and test, powerplant steam field, water injection systems and equipment and maintain lease site grounds.  The measure of accuracy and reliability is the safe, effective and efficient performance of the Facilities.  This position is predominately mechanic based with operation support as outlined below.

Description of Duties and Responsibilities
Level III:
This level of the Mechanic Operator position requires the completion of all Level III training requirements. The employee must perform the duties as described below and as defined in lower levels while attaining Level IV skills and experience through academic and hands-on training. Level III knowledge and skills focus on journey level mechanical duties and responsibilities.
•    Inspects, tests, calibrates, installs, rebuilds, adjusts, repairs and aligns all mechanical equipment such as hydraulic control systems, turbines, generators, cooling tower, pumps, electric motors, valves, gear reducers, compressors, blowers heat exchangers, HVAC systems excluding refrigerant replacement, fire protection systems, diesel and gas engines, mufflers, separators, traps, rock catchers, tanks, pipeline and pipe supports.
•    Maintains facility structures. 
•    Performs basic inspections and repairs various rigging equipment, fixtures and cranes.
•    Assists the scaffolding qualified journeyman in maintaining, and repairing scaffolding. 
•    Inspects and maintains safety devices such as harnesses and rescue equipment.
•    Works with Safety Manager to maintain records of regulated equipment.
•    Keeps accurate records of equipment history, reports and work orders on computer for CMMS.  Works with CMMS personnel for accuracy and reliability.
•    Performs preventative maintenance and assessments on various plant equipment.
•    Writes Work/Operating Procedures within area of expertise.
•    Requisitions replacement parts and supplies to carry out assigned tasks.
•    Makes working drawings of components and changes made to Plant systems relative to area of expertise.
•    Installs, inspects, tests, repairs, rebuilds, and maintains equipment such as portable and fixed site pumps, valves, mufflers, separators, traps, rock catchers, turbines, generators, motors, gear reducers, compressors and hydraulic control systems, pipelines, tanks, pipeline supports, effluent piping components.
•    Maintains lease site grounds structures, culverts, roads, drains and ditches.
•    Examines and diagnoses malfunctions or defective equipment on pumps, motors, valves, separators, vents, air vacuum breakers and compressors; disassembles/reassembles, overhauls and adjusts defective equipment
•    Installs, fits and calibrates equipment replacement parts.  Observes equipment operation.  Adjusts equipment to operational specifications using specialized tools and precision measuring instruments.
•    Disassembles, removes, repairs, replaces, assembles and aligns pipes, pipeline components, and valves repairing or replacing broken and worn parts using various hand tools.
•    Observes and directs contractors while digging trenches, cleaning tanks and maintaining lease site grounds.
•    Under the direction and training of operations, assists with clearances on steam field and effluent pipeline equipment for maintenance purposes.
•    Will be trained to Rig and lift equipment to install, repair or replace equipment.
•    Instructs and trains workers in repair and maintenance procedures of steam field, power plant and effluent pipeline equipment.
•    Maintains inventory of tools and materials for the maintenance work at the steam field and effluent pipeline.
•    Maintains steam field equipment records on work completed on CMMS or equivalent maintenance program.
•    Assists other classifications when needed.
•    Performs other job-related duties as required.
•    Acquire OSHA certified training to meet business needs.
•    Trains and advises other workers in the maintenance and operation of steam field and effluent pipeline equipment.
•    Maintains and repairs Hydraulic Control Systems.

Level IV:
This level of the Mechanic Operator position requires the completion of all Level IV training requirements for operational duties and responsibilities.  The employee must perform the duties as described below and as defined in lower levels while attaining Level V skills and experience through academic and hands-on training.
•    Reviews, coordinates and reports work orders, work activities and equipment clearances with appropriate personnel.  
•    Checks equipment to be cleared in advance to guarantee its condition to others.  Informs Operator Technician Lead Person and Supervisors of the status of equipment and systems.  
•    Under direction of the Operator Technician Lead Person or a designee, operates various equipment and performs basic equipment clearances on low voltages (<600 volt) electrical breakers, steam line equipment and effluent equipment.  
•    Terminates and connects motor wiring to facilitate bearing repairs (less than 600 volts.).
•    Conducts online test of equipment before certifying its status and performance.

Machinist Duties and Responsibilities
•     Sets up and operates machine tools to repair or reproduce equipment parts and fittings working from blueprints or defective parts using precision tools and measuring instruments.
•    Fabricates special tools, rigging equipment and replacement parts to repair equipment.   
•    Fabricates, modifies, shapes and repairs equipment parts using a variety of metal working machines.
•    Chips, grinds, bores, and drills equipment parts.
•    Verifies conformance of finished work piece to specifications, using precision measuring instruments.
•    Calibrates, fits and assembles equipment parts according to drawings and specifications using machine tools, power tools, and measuring instruments.
•    Installs machined replacement parts; starts and observes equipment operation to detect malfunctions or out-of-tolerance performance, adjusts as necessary.
•    Maintains shop equipment and tools.
•    Maintains inventory of machining tools.

Representative Physical and Job Demands
•    Regularly talks and listens to others to exchange and obtain information to direct the operation and maintenance of Geothermal Facility steam field and effluent equipment.
•    Regularly reaches, grasps, pushes and pulls various wrenches, hand tools, and other objects using manual dexterity and eye hand coordination to operate and maintain equipment.
•    Regularly climb ladders and walks on platforms near high temperature surfaces; works on slippery or uneven surfaces in precarious places.
•    Frequently walks, reaches, kneels and crouches using feet, legs, hands and manual strength to access and operate plant equipment.
•    Occasionally lifts and moves pumps motors and pipe weighing up to 50 pounds.
•    Routinely works near heated surfaces; works on slippery or uneven surfaces in precarious places to adjust or operate equipment.
•    Occasionally exposed to high voltage and other electrical hazards while working on equipment.
•    Routinely works in outside weather conditions and is exposed to chemicals, wet and humid conditions, extreme cold and heat while inspecting and maintaining equipment.  The noise level is frequently very loud.
•    Routinely listens to operating sounds of equipment to diagnosis equipment malfunctions.
•    Frequently operates forklifts cranes, air compressors, sandblasters and power tools to maintain and repair equipment.
•    Frequently operates Agency vehicles going to and from job locations.

Job Expectations
Acquisition and Use of Technical Knowledge
•    Possesses or acquires as needed the ability to detect, diagnose disassemble and repair steam and water equipment with a fundamental knowledge of; turbine equipment, and auxiliary systems and their capabilities; operation processes, mechanical and electrical theory and background to operate equipment; measuring devices and hand tools for maintenance work; general contamination and control practices and procedures; basic math, geothermal powerplant rules and regulations; clearance procedures, physics including pump mechanics; basic principles of thermodynamics and fluid flow.  Given this basic knowledge, understands own role within the plant and how that role requires the use of knowledge applied to practical, day to day, operations and maintenance demands.  Hold self-accountable to acquire knowledge that may be needed when a job situation changes, new tasks are introduced to the job, or when improved performance requires acquiring extended or specialized information.
•    Possesses or acquires as needed an extensive knowledge of safety, fire, and security rules and procedures.  Given the emphasis of safety at the plant, uses knowledge to improve plant conditions and the organization’s safety record.
•    Acquires knowledge of operations and maintenance procedures on a continuing basis to stay current as a significant contributor to plant solutions, safety performance, and operations and maintenance improvements.
•    Confers with Operator Technician Lead Person or Operations Supervisor to resolve system problems and offers a variety of workable solutions to complex problems and report status of systems and equipment.  
•    Identifies problems or trends with systems and equipment early to prevent operator or electrical errors. 
•    Passes knowledge on to other employees as a way to contribute to the performance of others, or get a job done.
•    Assesses own limitations with the fundamental knowledge needed to perform in the job.

Application of Technical and General Job Skills
Technical and job skills are indicated by demonstrating an ability to:
•    Efficiently and effectively operate, control, and maintain equipment, and be accountable for aspects of the job at the Geothermal Facility. 
•    Implement or use existing methods to control the waste of time, money and material resources, such as:
o    Acting to improve work procedures 
o    Conserving resources 
o    Expediting a job
o    Completing a work assignment efficiently
o    Completing long term work in an orderly fashion
•    Work with management to identify and learn from mistakes made and apply what is learned to future situations or plant conditions.
•    Establish and maintain effective work relationships with those contacted in the performance of required duties.
•    Review own action to determine the cause of poor working relationships so those relationships can be improved
•    May be required to work extended hours and on normal days off.
•    Operate Agency vehicles and equipment safely.

Training and Experience Requirements
Level III: Completion of the NCPA Level III training program or three years of equivalent journey-level mechanical experience.
Level IV: Completion of the NCPA Level IV training program or three years of equivalent journey-level mechanical experience and operations experience.

Driver’s License Requirement
Possession of an unrestricted Class C California operator’s license issued by the State of California, Department of Motor Vehicles.  Possession and maintenance of a good driving record as demonstrated by the absence of multiple or serious traffic violations or accidents within the last three (3) years.

Desired Qualifications 
•    Possession, or ability to obtain with training, a Class A California operator’s license issued by the State of California Department of motor Vehicles.
•    Ability to set up and operates machine tools to repair or reproduce equipment parts and fittings working from blueprints or defective parts using precision tools and measuring instruments.
•    Ability to Fabricate special tools, rigging equipment and replacement parts to repair equipment.   
•    Ability to Fabricate, modifies, shapes and repairs equipment parts using a variety of metal working machines.
•    Chips, grinds, bores, and drills equipment parts.
•    Verifies conformance of finished work piece to specifications, using precision measuring instruments.
•    Calibrates, fits and assembles equipment parts according to drawings and specifications using machine tools, power tools, and measuring instruments.
•    Installs machined replacement parts; starts and observes equipment operation to detect malfunctions or out-of-tolerance performance, adjusts as necessary.

EOE

The Department of Public Works is seeking an Associate Civil Engineer in the Road Operations Unit of the Road Services Division.

Associate Civil Engineer is the registered journey level classification in the engineering series. At this level, a high degree of technical expertise and some periodic lead responsibilities are required. Under general supervision, incumbents may perform a variety of professional engineering tasks in such areas as planning, design, traffic engineering & operations and construction inspection of roads, park trails, bridges, drainage, sanitary sewer systems, water supply, and other public works projects. Associate Civil Engineers may provide lead direction to other staff in completing projects of greater difficulty and complexity. Incumbents will be required to perform field work in support of the planning, design, and/or construction inspection of public works projects.

The ideal candidate for this position will be:

• Technically knowledgeable and experienced in the principles and practices of civil engineering, public works design, construction, and/or maintenance.
• An effective communicator, both orally and in writing; able to represent the County in meetings and presentations to various groups including property owners, community groups, regulatory and other governmental agencies, and the public.
• Customer-focused and interpersonally effective in dealing with staff, engineers, contractors, and the public, and in coordinating with law enforcement agencies, emergency responders, and other agencies when necessary.
• Able to provide information to the public and other governmental agencies, in person or over the telephone, regarding County procedures and regulations, facility locations, plan requirements, and property ownership, which may require the interpretation of policies and procedures.
• Able to perform development plan reviews and prepare plan review comments.
• Able to analyze and evaluate alternatives, make sound recommendations, and prepare concise and effective technical staff reports.
• Accountable and able to schedule and carry through with assignments with independence.
• Experienced with designing public works projects such as road improvements, drainage and flood control improvements, parks facilities, water treatment and distribution systems, and sanitary sewer systems.
• Experienced with computer aided drafting software such as AutoCAD/Civil3D or similar.

Examples Of Duties

Duties for these positions may include, but are not limited to:

• Serving as resident engineer on routine construction projects.
• Preparing designs, plans, and specifications for routine projects.
• Assisting in drafting and preparing instructions for bidders, proposals, affidavits, bonds, specifications, change orders, and other documents and reports involved in the construction of engineering projects.
• Gathering, compiling, and computing data using engineering, drafting, and calculating instruments and techniques to prepare designs, plans, estimates, technical reports, and specifications for the construction, alterations, maintenance, and operations of a variety of engineering projects.
• Supervising subordinate personnel in a variety of capacities.
• Inspecting construction projects for conformance with specifications, safety standards, and federal, state, and local regulations.
• Conducting economic cost and quantity estimates for assigned projects.
• Performing related duties as assigned.

Qualifications

Licensure/Certification: Candidates for Associate Civil Engineer must possess a valid Certificate of Registration as a Professional Civil Engineer in the State of California at the time of hire. Some positions require possession of a class C California driver license or equivalent.

Education and Experience: Any combination of education and experience that would likely provide the required knowledge, skills and abilities is qualifying. A typical way to qualify is:

• Possession of a valid Certificate of Registration as a Professional Civil Engineer in the State of California at the time of hire,
• Two years of professional civil engineering experience which has included field and office work in the planning, design, construction, and maintenance of a variety of civil engineering projects.

Knowledge of:

• Civil engineering practices and procedures including design and construction methods and techniques.
• Strength and properties and uses of materials and hydraulics.
• Civil engineering design and drafting principles.
• Surveying methods.
• Methods, materials and equipment used in civil engineering projects.
• Methods, materials, tools and equipment used in civil engineering construction work.
• Construction inspection techniques.
• Hydraulics and strength of materials.
• Principles of engineering as they apply to public works projects.
• Engineering mathematics and their application to engineering problems.

Skill/Ability to:

• Inspect civil engineering work in progress.
• Prepare clear, concise correspondence and reports.
• Comply with safety procedures.
• Supervise subordinate staff.
• Perform engineering calculations and routine design work.
• Solve surveying problems.
• Prepare neat and accurate maps, drawings, notes and reports.
• Operate survey equipment.

IMPORTANT: Applications for this position will only be accepted online. If you are currently on the County's website, you may click the ''Apply'' button. If you are not on the County's website, please go to https://jobs.smcgov.org to apply. Online applications must be received by the Human Resources Department before midnight on the final filing date.

~ TENTATIVE RECRUITMENT SCHEDULE ~

Final Filing Date: June 12, 2024

Application Screening: June 17-18, 2024

Civil Service Panel Interviews: June 27-28, 2024

Application deadline: Friday, July 19, 2024.

The South Placer Municipal Utility District is seeking an outstanding General Manager to lead its mission of protecting the public health and water environment, providing efficient and effective sanitary sewer services, and preparing for the future. The District has a reputation as a highly desirable District and has won numerous industry awards.

The General Manager is responsible for the day-to-day operations of the District and reports to a five member board. The General Manager plans, organizes, directs, and reviews the overall administrative activities of the District; advises and assists the Board; and represents the District’s interests at local, regional, State and Federal levels.

The ideal candidate will have a Bachelor’s Degree or higher from an accredited college or university in engineering, business, public administration or a closely related field; a Master’s Degree is desirable. Five years of professional experience at a senior-executive level in municipal utility systems, ideally with knowledge of wastewater maintenance systems and progressive responsibility in administration and operation of wastewater systems.

To view additional qualifications and submit your resume (reflecting years and months of employment including beginning/ending dates), cover letter, and a list of six work-related references (two supervisors, two direct reports, and two colleagues) please go to: https://www.cpshr.us/recruitment/2342

TO VIEW JOB ANNOUNCEMENT, CLICK JOB PDF OR JOB ANNOUNCEMENT URL BELOW.

THE POSITION

Perform professional civil engineering work in the planning, design, technical investigation, and construction of projects in public works, transportation, capital improvements, and structural engineering. An example of duties include:

• Participates in the preparation of plans and specifications for the construction of streets, storm drains, street lighting, traffic signals, buildings and related public works and City building projects; researches project design requirements; performs calculations and prepares estimates of material costs and time considerations.
• Researches publications and industry information sources.
• Develops and revises design and construction standards.
• Participates in the implementation of the City’s traffic and transportation engineering programs; prepares and revises plans and specifications for traffic related projects; prepares special studies and reports and coordinates major projects.
• Investigates field problems affecting property owners, contractors, and maintenance operations.
• Prepares estimates and feasibility reports for new or modified services and structures.
• Administers contracts and may assist with inspection services and project management for construction and maintenance projects.
• Participates in the plan check, review and processing of plans for private developments affecting streets, sewers, drains and related public works facilities and ensures that they meet all City imposed requirements.
• Prepares special engineering studies and reports.
• Coordinates planning, design, and construction activities with other City departments, divisions, and sections, and with outside agencies.
• Attends various staff and regional technical advisory meetings.
• Provides technical and professional assistance/support to other City departments and divisions, Planning Commission, and City Council as necessary.
• Performs other related duties as assigned.

MINIMUM QUALIFICATIONS

Equivalent to a Bachelor’s degree with major coursework in civil engineering or a closely related field;

OR

Possession of a current Engineer-in-Training Certificate, issued by the California State Board of Registration for Professional Engineers, and one (1) year of professional civil engineering experience.

License Requirements:

A valid California Class C driver license or higher with a satisfactory driving record is required at the time of appointment. Individuals who do not meet this requirement due to a disability will be reviewed on a case-by-case basis.

The City of San José, the Capital of Silicon Valley, is one of the nation's best managed cities and one of the top cities in which to live, work, and do business. Moreover, San José is the center of cultural, government and economic activity for the region. The employees of the City of San José have embraced the following values: Integrity, Innovation, Excellence, Collaboration, Respect, and Celebration. The City's Public Works Department is seeking an individual whose values align with the values of the City's employees.

The Department of Public Works is responsible for delivering capital improvement projects for a wide variety of City facilities and infrastructure, maintaining City facilities and fleet assets, facilitating , and regulating development activities, and providing animal care and services. The Department is committed to high-quality service, partnering with the community, and providing an excellent environment in which to work.

The Department of Public Works is recruiting to fill two (2) Senior Construction Inspector positions for the Construction Management Services (CMS) section within the Engineering Services Division : one (1) in Permits and one (1) in the Capital Program .

Salary range for this classification is $101,643.36 - $123,636.24 Annually .

This salary range(s) includes an approximate five percent (5%) ongoing non-pensionable compensation. Actual salary shall be determined by the final candidates' qualifications and experience.

Engineering Services Division (ES ) - Permits

The Senior Construction Inspector(s) assigned to Permits in the Engineering Services Division is responsible for coordinating, supervising, and performing materials sampling and testing of various construction materials to ensure compliance with City and State Standards and Specifications. Under the supervision of Principal Construction Inspectors, the candidate will perform the key responsibilities listed below.

Key responsibilities include, but are not limited to the following:

• Reviews plans and specifications and submittals for conformance to established standards for major construction projects.
• Reviews plans, drawings, and blueprints for completeness and accuracy and assures implementation of plan.
• Supervises, schedules, assigns, and directs activities for Associate Construction Inspectors, Engineering Technicians, Engineering Trainees, and Student Interns.
• Reviews and makes recommendations concerning proposed projects.
• Assists in resolving disputes between contractors, inspectors, developers, utilities, and consultants.
• Responsible for the tabulation of quantity of work completed per schedule of quantities, including the review of pay letters.
• Provides daily written reports describing project events.
• Facilities knowledge: concrete, carpentry, flooring, fencing, doors and windows, some plumbing, etc.
• Project management: scope development, procurement for resources (services and materials).
• Performs building assessments - assesses and documents the condition of building envelops and hard surfaces, interior coverings to include walls, flooring, ceilings, etc.
• Available to perform overtime duties on weekends, holidays, midnight or swing shift when requested .
• Performs Public Works emergency duties, such as flood watch when required .
• Investigate and respond to construction inquires/complaints from other departments or the public.
• Reviews plans and specifications to determine proper testing requirements and standards.

Engineering Services Division (ES) - Capital Improvement Programs

The Senior Construction Inspector(s) assigned to Capital Program s in the Engineering Services Division is responsible for maintenance and construction project management for Public Works. Under the direction of Principal Construction Inspectors, the candidate will perform the key responsibilities listed below.

Key responsibilities include, but are not limited to the following:

• Reviews plans and specifications and submittals for conformance to established standards for major construction projects.
• Prepares resource and/or cost estimates.
• Reviews plans, drawings, and blueprints for completeness and accuracy and assures implementation of plan.
• Supervises, schedules, assigns, and directs activities for Associate Construction Inspectors, Engineering Technicians, Engineering Trainees, and Student Interns.
• Reviews and makes recommendations concerning proposed projects.
• Assists in resolving disputes between contractors, inspectors, developers, utilities, and consultants.
• Responsible for the tabulation of quantity of work completed per schedule of quantities, including the review of pay letters.
• Provides daily written reports describing project events.
• Facilities knowledge: concrete, carpentry, flooring, fencing, doors and windows, some plumbing, etc.
• Available to perform overtime duties on weekends, holidays, midnight or swing shift when requested .
• Performs Public Works emergency duties, such as flood watch when required .

The Application Programmer performs or assists in the design, documentation, coding, testing, and implementation of new application programs or enhancements to existing application programs consistent with the Software Development Life Cycle (SDLC) best practices and applicable computer programming standards and frameworks. The position is primarily responsible for the suite of Bid-to-Bill applications as well as other business applications in use by the Agency. The position will work with other developer staff and supervisor during probationary status to learn and develop proficiency in the use of the Agency's software development frameworks, processes, and documentation design standards.

ESSENTIAL DUTIES AND RESPONSIBILITIES
This position requires that the incumbent reports for work on time and maintains satisfactory attendance in accordance with Agency policy; Ensures work responsibilities are covered when absent; Arrives to meetings and appointments on time; Performs special assignments as assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Level I: 
This classification is an entry-level position that is not expected to perform with the same level of independence of direction and judgment as higher levels. The level I works closely with other senior-level CTAs and is often given direction to complete tasks, install and troubleshoot hardware and software, perform system upgrades, evaluate and apply patches to systems, work closely with customers, and provide application support through help desk requests, and creates and maintains documentation.

Level II: 
This classification requires having all Level I duties and responsibilities with a minimum of two years of experience in software application development. Level II receives occasional direction and guidance from other senior-level CTAs; otherwise, uses developed experience and professional judgment to successfully complete projects in accordance with defined requirements and established timelines.

Responsibilities:
•    Within a specific hardware and operating system environment, work to define and design the operating features of new programs or enhancements
•    Produce appropriate conceptual-level application documentation for review and approval by the supervisor
•    Produce appropriate programming documentation for the review of the Supervisor, with sufficient detail on which to base programming activities
•    Develop computer programs in accordance with design documentation, closely following coding standards and conventions used within NCPA
•    Test applications using prescribed test methodology and tools
•    Develop an implementation plan, prepare production rollout for approval by the supervisor, and coordinate with the Ops team to execute the rollout
•    Maintain and enhance software applications
•    Conduct independent communications with user departments in a cooperative and professional manner
•    Provide emergency system support outside normal working hours as needed, on a rotational basis with other department employees
•    Travel to NCPA remote field sites to provide support to remote users as needed 
•    Assist in the evaluation of proposed new or modified computer system hardware and software

MINIMUM QUALIFICATIONS

Level I:
Education and/or Experience      
Bachelor's degree in Computer Science, Management Information Systems, Computer Engineering, or related field from an accredited four-year college or university and at least six months of related programming experience and training.

Level II:
Education and/or Experience      
Bachelor’s degree in Computer Science, Management Information Systems, Computer Engineering or related field from an accredited four-year college or university and at least two years of related programming experience and training. A minimum of two years in design and programming experience including some experience programming interactive programs. Experience must include exposure to systems analysis techniques.

KNOWLEDGE AND ABILITIES 
Knowledge:
Knowledge of VB.Net and/or C# as core programming language is essential; Integrated development environment (IDE) such as Microsoft Visual Studio; Source control management tools such as Team Foundation Server (TFS) and Git; JavaScript, HTML5, and Cascading Style Sheets (CSS) for developing web pages is highly desired; Oracle PL/SQL, SQL-Server T-SQL or similar SQL experience and understanding of relational database principles. Knowledge of software testing methodologies and tools, computer equipment and capabilities, data communications and local area networking, and client-server software is essential; Principles and programming techniques used to implement online interactive applications, technical report writing, systems analysis techniques, database management concepts, and management information system concepts; DevOps and related best practices; and knowledge of the Component-based Scalable Logical Architecture (CSLA) is an advantage.

Abilities:
Ability to write moderately complex programs and develop detailed program specifications; Demonstrate an understanding of MVC (Model-View-Controller; Stay up to date with related software development technologies through training, product research, and participating in conferences and user groups. Ability to work effectively with a broad, diverse cross-section of peers and various individual personalities; listen effectively, communicate with, and maintain a professional working relationship with co-workers; communicate clearly, efficiently, and professionally both over the phone and in person; Maintain strong organizational skills; and the ability to complete quality and timely work with minimal supervision.

SPECIAL REQUIREMENTS

Valid California Driver's License and insurance. 

This job has no supervisory responsibilities.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this Job, the employee is regularly required to sit and view and operate a computer, use hands to finger, handle, or feel, reach with hands and arms, and talk or hear. Requires manual finger dexterity and eye-hand coordination to operate and adjust office equipment such as computers. The employee is occasionally required to stand and walk. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, color vision, and the ability to adjust focus.

The noise level in the work environment is usually quiet.

All employees are responsible for contributing to an inclusive, safe, and secure work environment that values diverse cultures, perspectives, and experiences and is free from discrimination.

Join an agency committed to creating a healthy breathing environment for every Bay Area resident while protecting and improving public health, air quality, and the global climate!
 
The Bay Area Air Quality Management District (Air District) is a regional government agency, committed to achieving clean air to protect the public's health and the environment. The Air District accomplishes this goal through regulation of industrial facilities and various outreach and incentive programs designed to encourage clean air choices. The Air District's jurisdiction encompasses all of seven counties - Alameda, Contra Costa, Marin, San Francisco, San Mateo, Santa Clara and Napa, and portions of two others - southwestern Solano and southern Sonoma.
 
At the Air District, we take pride in our commitment to fostering a workplace that values diversity and promotes cultural awareness. We prioritize employee engagement by providing a collaborative and inclusive environment that encourages active participation and open dialogue. Additionally, we believe in pay equity and strive to create an equitable compensation structure. With a strong emphasis on work-life balance, we understand the importance of supporting our employees' well-being both inside and outside the workplace. Join us in a dynamic and inclusive culture where your contributions are celebrated, and your growth is nurtured.

The Air District is currently accepting applications for the position of Principal Staff Specialist in the Strategic Incentives Division (SI) Division. This is an open recruitment for one (1) full-time, represented position.

The Strategic Incentives Division supports the Air District’s mission by implementing incentive programs (grant programs) that achieve voluntary reductions of air pollutants and greenhouse gases, primarily from on- and off-road vehicles and equipment that operate in the Air District’s jurisdiction. In 2023-2024, the SI Division is administering more than $90 million in new revenue to fund programs and projects that replace older diesel-fueled vehicles and equipment such as school and transit buses, marine vessels, locomotives, trucks, construction equipment, agricultural equipment, and other mobile equipment, with newer, cleaner alternatives, including zero-emission technologies, and install refueling/charging infrastructure that supports the accelerated adoption of zero-emissions vehicles and equipment. Other programs administered support the reduction of single-occupancy vehicle, provide cash and mobility options to residents for turning in their older vehicles, and provide grants to reduce pollution from woodburning devices. The Division develops programs to meet community identified strategies for reducing air quality disparities and that benefit the Bay Area’s most overburdened communities.

About you in the position

The Principal Staff Specialist (AB 617 role) in the SI Division will coordinate the division's efforts in bringing greater equity to grant programs through program development, collaboration with other divisions, and engagement with communities under the AB 617 program. With your in-depth knowledge of the Air District’s emission reduction grant programs, you will lead the division's participation in internal and external AB 617 engagement, including communicating the role of the division; analyzing, reporting, and presenting information about air quality improvement incentive programs and mobile sources, participating in community meetings, proposing and guiding discussions on incentive-related emission reduction strategies and actions, developing plans/programs to implement action, and soliciting feedback on strategy implementation. Examples of other tasks include preparing written materials related to grant programs, reports and plans; proposing recommendations for updates to current incentive programs; developing and supporting the development of new programs; assessing impacts of regulatory actions on mobile source categories; presenting to the Board of Directors and other stakeholders; and leading and training staff. This position will require working nights and weekends on occasion to attend community meetings and public events. Your work will empower our team to make informed decisions that will benefit communities, meet our requirements, and advance our mission.

Minimum Qualifications

Education & Experience

A typical way to obtain the knowledge and skills is:

Equivalent to the completion of a Bachelor’s degree from an accredited college or university and four years of professional analytical experience, including developing and administering programs. Some positions may require more specialized education, training, and experience. A graduate degree may substitute up to two years of the required experience. Desirable qualifications/skills Excellent communication and presentation skills, with the ability to adapt to the audience. Professionalism and good judgement in representing an agency/company with external stakeholders including the public, businesses, and other agencies. Training or experience working with and for the public and community groups to advance equity and environmental justice. Competency in managing time and responsibilities with little oversight and working efficiently. Reading and interpreting laws, policies, procedures, regulations, guidelines, maps, specifications, and other data. Bilingual proficiency in one or more languages commonly spoken in the San Francisco Bay Area. Interdisciplinary knowledge and/or learning agility with respect to state or other incentive programs, mobile sources of air pollution, zero-emission technology and infrastructure, heavy-duty equipment operations at Bay Area ports and other industrial hubs, and/or impacts of air quality regulatory actions on industry.

Other desired experience includes grant program development, project supervision, team leadership, developing RFP/RFQs, contracts, budgeting, grants management, community organizing, and report writing.

How to Apply & Selection Criteria

Interested individuals must submit a completed Air District application, chronological resume, and responses to the supplemental questionnaire by 5:00 p.m. on Monday, June 10, 2024. Applications are accepted online; please visit our website at www.baaqmd.gov/jobs to apply.

Operations & Maintenance Superintendent

Public Works Department

Salary Range: $9,735 - $11,833 per month

Plus excellent benefits

APPLICATION DEADLINE:  Apply by 8:00 a.m., Friday, June 7, 2024. Applications will be reviewed as they are received; phone screening may be conducted while this posting is still active.

The Public Works Department is recruiting for an Operations & Maintenance Superintendent, who, under general direction from the Operations & Maintenance Manager, will oversee the operations and maintenance activities of the Facilities, Streets, Parks, and Vehicle Maintenance divisions. This position will manage budgets of the respective divisions, supervise and guide division supervisors, and advance technical knowledge and skills to affect the research, analysis, planning, and implementation of operations functions. 

THE CITY is focused on enhancing our community members’ quality of life through well-designed services and a positive workplace culture.  San Rafael is the economic and cultural heart of Marin County, and its high quality of life is centered on its commercial districts, engaged neighborhoods, active lifestyle, and natural environment.  San Rafael (population approximately 60,000) is a full-service city with a city council/city manager form of government with 12 departments, more than 400 employees, and an annual budget of $172 million.  The City’s vision is to be a vibrant economic and cultural center reflective of its diversity.  The City Council is engaged and seeks to strengthen the urban and commercial areas as well as sustain the beautiful natural environment.

San Rafael’s Organizational culture framework is an initiative called “Together San Rafael.”  City employees are our greatest asset, and we seek talented individuals with diverse backgrounds who are creative, curious, and excited about a challenge.  We are a results-driven team focused on the needs of community members.  The Together San Rafael initiative is focused on modernizing City services and increasing the engagement of employees.  This initiative recognizes the interconnectedness of the customer and employee experience. 

THE DEPARTMENT is committed to providing the highest standards of service delivery to its citizens as it works to build, maintain, and update the City’s civic infrastructure. The Department of Public Works (PW) is comprised of approximately 50 employees with a general budget of $15 million and a Capital Improvement Program (CIP) budget that ranges between $10–$40 million depending on the City’s annual infrastructure needs. Its mission is to ensure San Rafael’s infrastructure meets the needs of a vibrant and growing city through careful management of major improvements and the maintenance of the City’s assets. By hiring highly trained, dedicated, responsive, and service-oriented personnel, the DPW is actively making its mission a reality.

Recently, the Department underwent a process of restructuring as management of all City engineers was placed under the Assistant Director for enhanced oversight, communication, and workflow. The City has recently championed the Dean Allison Award internship program, which shepherds talented young graduates into local government and encourages engagement with the public sector of California. The Public Works Department is also currently completing several exciting initiatives to improve transformation, accessibility, and maintenance of the City’s infrastructure while also adding recreation spaces for the public to enjoy. For an overview of the City of San Rafael’s upcoming Capital Improvement Projects, see this page for active and upcoming CIP projects.

THE IDEAL CANDIDATE will have strong organizational, planning, communication, and leadership skills that allow them to effectively manage different aspects of public works operations and maintenance. They will also have a strong sense of customer service and the ability to help find solutions to complex service issues. They will be flexible, with the ability to adjust priorities at short notice and respond to emergencies. They will be able to think analytically but also be very decisive when needed. The successful candidate will lead by example to foster a positive, creative, and productive work environment for all staff.

UPCOMING PROJECTS & INITIATIVES:

• Public Works will be implementing computerized asset and maintenance management software that will require significant change management within operations and maintenance. The superintendent will play a key role in the implementation and change management of this technology.
• It is a goal to implement safety and developmental programs that engage, educate and train staff for their current and future roles. The superintendent will assist with the development and management of these programs.
• Improving service delivery is a constant challenge. The superintendent will assist with finding creative ways to improve service delivery that benefits internal and external stakeholders.

THE POSITION:

This position is part of the Represented Mid-Managers group and is “at will”.  Employment may be terminated with or without cause or notice, at any time by the City of San Rafael. 

This position performs the following essential job duties (including but not limited to):

• Provide leadership, direction, and supervision to operations and maintenance staff, including assigning tasks, monitoring performance, and providing feedback and coaching.
• Foster a positive and productive work environment that encourages teamwork, collaboration, and professional growth.
• Develop and implement operational plans, policies, and procedures to ensure the efficient delivery of services.
• Coordinate with other City departments and external agencies to prioritize and schedule operations activities, including street maintenance, park maintenance/landscaping, facility upkeep/repair, fleet maintenance/replacement, and utility services.
• Oversee the planning and execution of maintenance activities for city infrastructure assets, including streets, sidewalks, parks, buildings, vehicles, and utilities.
• Coordinate with contractors, vendors, and service providers to ensure timely and cost-effective completion of maintenance projects.
• Monitor the condition of infrastructure assets and develop strategies for preventative maintenance and repairs.
• Maintain accurate records and inventory of city-owned infrastructure assets, including condition assessments, maintenance history, and replacement schedules.
• Develop and implement asset management strategies to optimize the lifecycle of infrastructure assets and maximize return on investment.
• Prepare reports and presentations on asset performance, budget projections, and recommendations for capital improvements.
• Ensure compliance with federal, state, and local regulations, codes, and standards governing public works operations and maintenance activities.
• Coordinate safety program for department staff ensuring proper training and protocol.
• Obtain necessary permits, licenses, and approvals for maintenance projects and activities, and ensure timely renewal and compliance with regulatory requirements.
• Respond to inquiries, complaints, and requests for information from the public, elected officials, and regulatory agencies regarding operations and maintenance issues.
• Performs related duties as required

To be eligible for this position, you must have knowledge of/ability to:

• Principles and practices of supervision (including selection, employee evaluation, counseling and motivation of employees), work planning, and control, budgeting, planning, scheduling, estimating and directing work. 
• Methods, materials, tools, and equipment used in the maintenance of Streets, Parks, Facilities and Vehicles.
• Techniques and City processes for planning, specifying, and requisition materials, supplies and equipment, and administering contracts. 
• City personnel and administrative policies and procedures. 
• Memorandum of Understanding and related documents governing working conditions. 
• Safe working practices. 
• Supervise several work units through supervisors. 
• Plan, schedule, assign, appraise and counsel employees. 
• Establish and maintain effective working relationships with employees, public, and other agencies 
• Communicate tactfully and effectively with the public, before groups, elected officials, or employees of the organization. 
• Identify operations problems and develop effective course of action for resolution.
• Maintain records and prepare routine reports and correspondence of division activities, hours and materials expended. 
• Develop and monitor budgets, ensuring each project stays in budget. 
• Use personal computer and related software. 
• Read and interpret construction plans, specifications and engineering drawings and diagrams.
• Occasionally participate in work supervised. 
• Work on an on-call basis during emergencies. 
• Direct, perform inspections, and supervise work outdoors in inclement weather, underground, and in unpleasant or potentially hazardous conditions. 
• Read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. 
• Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. 
• Work safely in potentially hazardous conditions.

EDUCATION and/or EXPERIENCE:

Any combination of education and experience that demonstrates possession of the requisite knowledge, skills, and abilities.  A typical way to obtain these would be:

• Graduation from high school or G.E.D. equivalent, supplemented with training/education in supervisory principles.
• Five (5) years of progressively responsible experience in streets maintenance and repair, parks maintenance, facilities maintenance and/or vehicle maintenance, including a minimum of two (2) years in a supervisory capacity.
• Training/experience in database management and/or experience using database systems is highly desirable.
• Valid California Driver’s License

See complete Operations & Maintenance Superintendent Job Description here.

PHYSICAL DEMANDS:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; and reach with hands and arms.  The employee frequently is required to talk or hear.  The employee is occasionally required to climb or balance and stoop, kneel, crouch, or crawl.  The employee must regularly lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds.  Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.

WORK ENVIRONMENT:

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.  While performing the duties of this job, the employee frequently works in indoor conditions and frequently works near video display.  The employee is occasionally exposed to moving mechanical parts and outside weather conditions.  The noise level in the work environment is usually moderate.

APPLICATION AND SELECTION PROCESS:

City of San Rafael application is required.  Resumes do not substitute for the City application.  Candidates should detail related education and experience on the application.  The examination process may include the following application appraisal and oral board interview examination.  The passing point for the oral board examination final score will be 70%.  Note:  Prior to appointment, candidate must pass a pre-employment physical, background check/fingerprinting, and driving record.  To file an application, go to:  www.calopps.org.  Select “Member Agencies”.  Select “San Rafael”.  Follow this link to submit your application:  https://www.calopps.org/san-rafael/job-20508995.

For more information about the City of San Rafael, please visit www.cityofsanrafael.org. 

Reasonable Accommodation:  The City of San Rafael will make reasonable accommodations in the exam process to accommodate disabled applicants.  If you have a disability for which you require accommodation, please contact us at (415) 485-3474 before the test date.  Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions of this position.  Such accommodation must be requested by the applicant. 

The City of Belmont Public Works Department is recruiting for the position of Senior Civil Engineer. First review of applications will be May 28, 2024 with interviews scheduled for May 30 and 31, 2024.

Why join our Team?

It's exciting to be part of the Belmont Public Works team.  We are an energetic, collaborative group that share a passion for serving our community and improving the place we live and work.  We will provide you with a wide rage of opportunities in a team-based collaborative environment while helping you achieve your professional goals.

Check out the Public Works homepage for more information: Public Works - City of Belmont

What You'll Do

The Public Works Department is responsible for the City's major capital projects and infrastructure including streets, sidewalks, streetlights, traffic signals, sewer and storm conveyance systems, and pump stations.  The Department is also responsible for the efficient management of the City's traffic operations and review of right-of-way impacts associated with private developments.

Transportation is and continues to be of importance to our Department and the community.  Traffic congestion plagues many of the peninsula cities.  Belmont has taken a proactive approach by continuously looking for transportation improvements, such as roundabout design, multimodal enhancements, and an adaptive signal operation system on our main East-West connection, Ralston Avenue.  Another pivotal project is the development of a citywide Transportation Master Plan, to help guide the City for its future growth.

Private development has grown significantly in the City the last 5 years, including biolife sciences, housing, and mixed-use developments.  Most notable are the Conceptual Development Plan and Development for the Belmont Stanford Campus at Notre Dame de Namur University and the Annexation of the Harbor Industrial Area from the County of San Mateo.

This invitation is focused on recruiting a Senior Engineer for private development and permitting services.  Key assignments include leading staff and managing consultants and contractors through the private development process, as well as managing the permitting services.  However, the Senior Engineer may be assigned to work in any of the work areas mentioned above.

In addition, the Senior Engineer assists in preparing and monitoring operating budgets in connection with assigned programs and contract management.  Effective communication skills and the ability to recognize the interconnectedness of the various civil disciplines and stakeholders are critical to the success of this position.  This position is public-facing and may be needed in planning commissions and city council meetings.  This position involves direct supervision of a growing team of 3-4 staff members, which may include engineers, engineering technicians, and contract staff.

Generally, the Senior Civil Engineer supervises, assigns, reviews, and participates in the work of staff responsible for performing professional and technical engineering services in the design and management of public works capital improvement projects, private development, permitting and other services, ensuring high work quality and adherence to established policies and procedures.

Positions at this level are distinguished from other classes within the series by the level of responsibility assumed and the complexity of duties assigned.  Employees perform the most difficult and responsible types of duties assigned to classes within this series, including management of the most complex engineering projects or exercising lead direction over lower-level staff.  Employees at this level are required to be fully trained in all procedures related to assigned area of responsibility.

The responsibilities and duties of the Senior Civil Engineer may include, but are not limited to, the following:

• Plan, prioritize, assign, supervise, review, and participate in the work of staff responsible for providing professional engineering services in the design and management of public works capital improvement projects.
• Establish schedules and methods for providing engineering services, identify resource needs, review needs with appropriate management staff, and allocate resources accordingly.
• Participate in the development of policies and procedures, monitor work activities to ensure compliance with established policies and procedures, and make recommendations for changes and improvement to existing standards and procedures.
• Recommend and assist in the implementation of goals and objectives and implement approved policies and procedures.
• Perform the more technical and complex tasks of the work unit, including management and administration of construction and professional services contracts.
• Supervise and participate in the work of lower-level engineering staff in the preparation of project plans, specification, cost estimates, and contract administration for capital projects.
• Supervise and participate in the inspection of capital projects, ensure compliance with applicable codes and regulations and provide resolutions to construction problems.
• Prepare and/or review professional civil engineering designs for assigned projects utilizing a variety of computer software programs, perform detailed calculations and computations, and prepare and/or review the adequacy and accuracy of computations, preliminary layouts, and design work from field and survey data.
• Review and approve changes to approved plans and specifications and process a variety of permits.
• Exercise professional engineering judgment in accordance with current accepted practice of civil engineering and appropriate laws and codes.
• Participate in the selection of technical engineering staff, provide or coordinate staff training, work with employees to correct deficiencies, and implement discipline procedures.
• Participate in the preparation and administration of assigned engineering program budget, submit budget recommendations and monitor expenditures.

To review the complete job description, visit www.belmont.gov

Glenn County is recruiting individuals to fill three full time and multiple Part Time/ Extra Help positions in the Public Works Agency. The Public Works Maintenance Worker I/II/III position performs a variety of semi-skilled and skilled labor in the construction, maintenance and repair of County roads, bridges, and other related structures, and in various traffic control maintenance and  repair activities of the Public Works Agency; operates a variety of construction, maintenance and transportation equipment as necessary to complete daily tasks at the Glenn County Public Works Agency. The Public Works Maintenance Worker III position is the journey-level class in the series, and is distinguished from the Public Works Maintenance Worker II by the primary responsibility to operate heavy diesel and gasoline-powered construction equipment in the maintenance of roadways, drainage systems. 
 

WHAT YOU’LL DO

• Prepares roads for patch repairs, overlays, or chip seals; prepares mix for patching roads; repairs and reconstructs roads.
• Cleans roadsides and drainage systems; inspects and clears debris from drainage systems; conducts roadside burning as needed.
• Prunes trees and other vegetation as needed.
• Directs and controls traffic around work sites.
• Operates semi-trucks, dump trucks, water trucks, boom truck, front loader, rollers, snow plow, etc.; operates a compressor, sand blasters, jack hammer, chipper machine, welding equipment, cutting torch, compaction tools, weed eater, blower, and other hand and power tools.

I-   $18.29 - $22.24 Per Hour
II-  $19.70 - $23.94 Per Hour
III- $20.72 - $25.19 Per Hour