Search Jobs

Located in Middletown, CA!

The Mechanic Operator position consists of five levels of competency.  Individuals can either enter into the classification at the beginning level of the job or somewhere between the entry level and the top step depending on the qualifications brought with them.  It is the expectation of NCPA that all employees progress to the top level.  In order to progress to the top level an employee must complete all components in a competency level within the associated training matrix.  Employees who successfully complete a training level matrix and who received a rating of “meets requirements” or higher by their immediate supervisor will be promoted when qualified.  Upon completion/demonstration of competencies employees will be expected to perform work in all completed levels and other job-related duties as required. All employees have the right to challenge any component in the training matrix by proving proficiencies verbally and practically.

General Scope of the Job
Under general supervision of the Mechanical Maintenance Supervisor and at times under the general direction of the Mechanic Operator Lead Person; to maintain, repair, adjust, install, and test, powerplant steam field, water injection systems and equipment and maintain lease site grounds.  The measure of accuracy and reliability is the safe, effective and efficient performance of the Facilities.  This position is predominately mechanic based with operation support as outlined below.

Description of Duties and Responsibilities
Level III:
This level of the Mechanic Operator position requires the completion of all Level III training requirements. The employee must perform the duties as described below and as defined in lower levels while attaining Level IV skills and experience through academic and hands-on training. Level III knowledge and skills focus on journey level mechanical duties and responsibilities.
•    Inspects, tests, calibrates, installs, rebuilds, adjusts, repairs and aligns all mechanical equipment such as hydraulic control systems, turbines, generators, cooling tower, pumps, electric motors, valves, gear reducers, compressors, blowers heat exchangers, HVAC systems excluding refrigerant replacement, fire protection systems, diesel and gas engines, mufflers, separators, traps, rock catchers, tanks, pipeline and pipe supports.
•    Maintains facility structures. 
•    Performs basic inspections and repairs various rigging equipment, fixtures and cranes.
•    Assists the scaffolding qualified journeyman in maintaining, and repairing scaffolding. 
•    Inspects and maintains safety devices such as harnesses and rescue equipment.
•    Works with Safety Manager to maintain records of regulated equipment.
•    Keeps accurate records of equipment history, reports and work orders on computer for CMMS.  Works with CMMS personnel for accuracy and reliability.
•    Performs preventative maintenance and assessments on various plant equipment.
•    Writes Work/Operating Procedures within area of expertise.
•    Requisitions replacement parts and supplies to carry out assigned tasks.
•    Makes working drawings of components and changes made to Plant systems relative to area of expertise.
•    Installs, inspects, tests, repairs, rebuilds, and maintains equipment such as portable and fixed site pumps, valves, mufflers, separators, traps, rock catchers, turbines, generators, motors, gear reducers, compressors and hydraulic control systems, pipelines, tanks, pipeline supports, effluent piping components.
•    Maintains lease site grounds structures, culverts, roads, drains and ditches.
•    Examines and diagnoses malfunctions or defective equipment on pumps, motors, valves, separators, vents, air vacuum breakers and compressors; disassembles/reassembles, overhauls and adjusts defective equipment
•    Installs, fits and calibrates equipment replacement parts.  Observes equipment operation.  Adjusts equipment to operational specifications using specialized tools and precision measuring instruments.
•    Disassembles, removes, repairs, replaces, assembles and aligns pipes, pipeline components, and valves repairing or replacing broken and worn parts using various hand tools.
•    Observes and directs contractors while digging trenches, cleaning tanks and maintaining lease site grounds.
•    Under the direction and training of operations, assists with clearances on steam field and effluent pipeline equipment for maintenance purposes.
•    Will be trained to Rig and lift equipment to install, repair or replace equipment.
•    Instructs and trains workers in repair and maintenance procedures of steam field, power plant and effluent pipeline equipment.
•    Maintains inventory of tools and materials for the maintenance work at the steam field and effluent pipeline.
•    Maintains steam field equipment records on work completed on CMMS or equivalent maintenance program.
•    Assists other classifications when needed.
•    Performs other job-related duties as required.
•    Acquire OSHA certified training to meet business needs.
•    Trains and advises other workers in the maintenance and operation of steam field and effluent pipeline equipment.
•    Maintains and repairs Hydraulic Control Systems.

Level IV:
This level of the Mechanic Operator position requires the completion of all Level IV training requirements for operational duties and responsibilities.  The employee must perform the duties as described below and as defined in lower levels while attaining Level V skills and experience through academic and hands-on training.
•    Reviews, coordinates and reports work orders, work activities and equipment clearances with appropriate personnel.  
•    Checks equipment to be cleared in advance to guarantee its condition to others.  Informs Operator Technician Lead Person and Supervisors of the status of equipment and systems.  
•    Under direction of the Operator Technician Lead Person or a designee, operates various equipment and performs basic equipment clearances on low voltages (<600 volt) electrical breakers, steam line equipment and effluent equipment.  
•    Terminates and connects motor wiring to facilitate bearing repairs (less than 600 volts.).
•    Conducts online test of equipment before certifying its status and performance.

Machinist Duties and Responsibilities
•     Sets up and operates machine tools to repair or reproduce equipment parts and fittings working from blueprints or defective parts using precision tools and measuring instruments.
•    Fabricates special tools, rigging equipment and replacement parts to repair equipment.   
•    Fabricates, modifies, shapes and repairs equipment parts using a variety of metal working machines.
•    Chips, grinds, bores, and drills equipment parts.
•    Verifies conformance of finished work piece to specifications, using precision measuring instruments.
•    Calibrates, fits and assembles equipment parts according to drawings and specifications using machine tools, power tools, and measuring instruments.
•    Installs machined replacement parts; starts and observes equipment operation to detect malfunctions or out-of-tolerance performance, adjusts as necessary.
•    Maintains shop equipment and tools.
•    Maintains inventory of machining tools.

Representative Physical and Job Demands
•    Regularly talks and listens to others to exchange and obtain information to direct the operation and maintenance of Geothermal Facility steam field and effluent equipment.
•    Regularly reaches, grasps, pushes and pulls various wrenches, hand tools, and other objects using manual dexterity and eye hand coordination to operate and maintain equipment.
•    Regularly climb ladders and walks on platforms near high temperature surfaces; works on slippery or uneven surfaces in precarious places.
•    Frequently walks, reaches, kneels and crouches using feet, legs, hands and manual strength to access and operate plant equipment.
•    Occasionally lifts and moves pumps motors and pipe weighing up to 50 pounds.
•    Routinely works near heated surfaces; works on slippery or uneven surfaces in precarious places to adjust or operate equipment.
•    Occasionally exposed to high voltage and other electrical hazards while working on equipment.
•    Routinely works in outside weather conditions and is exposed to chemicals, wet and humid conditions, extreme cold and heat while inspecting and maintaining equipment.  The noise level is frequently very loud.
•    Routinely listens to operating sounds of equipment to diagnosis equipment malfunctions.
•    Frequently operates forklifts cranes, air compressors, sandblasters and power tools to maintain and repair equipment.
•    Frequently operates Agency vehicles going to and from job locations.

Job Expectations
Acquisition and Use of Technical Knowledge
•    Possesses or acquires as needed the ability to detect, diagnose disassemble and repair steam and water equipment with a fundamental knowledge of; turbine equipment, and auxiliary systems and their capabilities; operation processes, mechanical and electrical theory and background to operate equipment; measuring devices and hand tools for maintenance work; general contamination and control practices and procedures; basic math, geothermal powerplant rules and regulations; clearance procedures, physics including pump mechanics; basic principles of thermodynamics and fluid flow.  Given this basic knowledge, understands own role within the plant and how that role requires the use of knowledge applied to practical, day to day, operations and maintenance demands.  Hold self-accountable to acquire knowledge that may be needed when a job situation changes, new tasks are introduced to the job, or when improved performance requires acquiring extended or specialized information.
•    Possesses or acquires as needed an extensive knowledge of safety, fire, and security rules and procedures.  Given the emphasis of safety at the plant, uses knowledge to improve plant conditions and the organization’s safety record.
•    Acquires knowledge of operations and maintenance procedures on a continuing basis to stay current as a significant contributor to plant solutions, safety performance, and operations and maintenance improvements.
•    Confers with Operator Technician Lead Person or Operations Supervisor to resolve system problems and offers a variety of workable solutions to complex problems and report status of systems and equipment.  
•    Identifies problems or trends with systems and equipment early to prevent operator or electrical errors. 
•    Passes knowledge on to other employees as a way to contribute to the performance of others, or get a job done.
•    Assesses own limitations with the fundamental knowledge needed to perform in the job.

Application of Technical and General Job Skills
Technical and job skills are indicated by demonstrating an ability to:
•    Efficiently and effectively operate, control, and maintain equipment, and be accountable for aspects of the job at the Geothermal Facility. 
•    Implement or use existing methods to control the waste of time, money and material resources, such as:
o    Acting to improve work procedures 
o    Conserving resources 
o    Expediting a job
o    Completing a work assignment efficiently
o    Completing long term work in an orderly fashion
•    Work with management to identify and learn from mistakes made and apply what is learned to future situations or plant conditions.
•    Establish and maintain effective work relationships with those contacted in the performance of required duties.
•    Review own action to determine the cause of poor working relationships so those relationships can be improved
•    May be required to work extended hours and on normal days off.
•    Operate Agency vehicles and equipment safely.

Training and Experience Requirements
Level III: Completion of the NCPA Level III training program or three years of equivalent journey-level mechanical experience.
Level IV: Completion of the NCPA Level IV training program or three years of equivalent journey-level mechanical experience and operations experience.

Driver’s License Requirement
Possession of an unrestricted Class C California operator’s license issued by the State of California, Department of Motor Vehicles.  Possession and maintenance of a good driving record as demonstrated by the absence of multiple or serious traffic violations or accidents within the last three (3) years.

Desired Qualifications 
•    Possession, or ability to obtain with training, a Class A California operator’s license issued by the State of California Department of motor Vehicles.
•    Ability to set up and operates machine tools to repair or reproduce equipment parts and fittings working from blueprints or defective parts using precision tools and measuring instruments.
•    Ability to Fabricate special tools, rigging equipment and replacement parts to repair equipment.   
•    Ability to Fabricate, modifies, shapes and repairs equipment parts using a variety of metal working machines.
•    Chips, grinds, bores, and drills equipment parts.
•    Verifies conformance of finished work piece to specifications, using precision measuring instruments.
•    Calibrates, fits and assembles equipment parts according to drawings and specifications using machine tools, power tools, and measuring instruments.
•    Installs machined replacement parts; starts and observes equipment operation to detect malfunctions or out-of-tolerance performance, adjusts as necessary.

EOE

We have exciting internship opportunities available at the City of Millbrae’s Public Works Department.  The Public Works Department is looking to hire two (2) interns for the Engineering Division. This is an open-ended internship without a specific term. The working schedule is to be determined based on business needs and candidate availability, and no more than 1,000 hours in a fiscal year.

The Engineering Division interns would be working on various infrastructure projects, such as streets, sewer, bridge/structural, permitting, and document management.  Interns will assist the engineers by writing reports or conducting field visits to solve construction issues.  Interns would report to the Senior Engineers located at the Corporation Yard at 400 East Millbrae Avenue.

We encourage anyone interested in municipal engineering to apply.  Jump start your career early through participating in these valuable, paid internships.  Join the Millbrae team to learn and experience City government! 

SUMMARY:  Under close supervision, performs a variety of entry-level administrative tasks and special projects; assists in the coordination of administrative activities and analysis of department systems and procedures; and performs related work, as required.

ESSENTIAL FUNCTIONS: -- Essential functions, as defined under the Americans with Disabilities Act, may include any of the following representative duties, knowledge, and skills.  This is not a comprehensive listing of all functions and duties performed by incumbents of this class; employees may be assigned duties which are not listed below; reasonable accommodations will be made as required.  The job description does not constitute an employment agreement and is subject to change at any time by the employer.  Essential duties and responsibilities may include, but are not limited to the following:

• Research, compile, tabulate, and analyze data for a variety of administrative and departmental matters.
• Assist department personnel in assigned administrative, planning, organizational, technical, and professional tasks.
• Provide suggestions or recommendations regarding department specific projects.
• Prepare and present reports; draft policies and procedures; respond to requests for information. 
• Perform specific department related duties and tasks as required.

MINIMUM QUALIFICATIONS:

Education, Training and Experience Guidelines: 

Proof of enrollment in a college or university OR recent graduates with paid or volunteer work experience, which demonstrates the ability to successfully perform the duties of the position.  Major course of study may be in one of the following areas: Business Administration, Public Administration, Accounting, Architecture, Computer Science, Engineering, Urban Planning, Human Resources, Communications, Recreation Administration, OR a related field of study. Education and experience will be evaluated based on the actual position.

Knowledge of: 

• Principles and practices of public administration and organization applicable to a local agency.
• Administrative techniques; statistical practices and methods of graphic presentation.
• Modern office methods, practices, procedures, and equipment, including personal computers and modern software and spreadsheet programs.
• Elements of business writing and proper use of English, vocabulary, spelling, punctuation, and grammar.  

Skill in:  

• Providing efficient customer service and communicating clearly and objectively both verbally and in writing.
• Organizing with the ability to prioritize work and exercise independent judgment, wisdom, common sense, and initiative.
• Thoroughly carrying out oral and written instructions.
• Gathering and analyzing data; preparing narrative reports and performing numerical analysis.
• Evaluating and recommending changes to policies, programs, and practices.
• Conducting research; proficiently utilizing a personal computer in completing special projects. 
• Following written and oral instructions with minimum supervision; effectively presenting information in writing and orally to the general public, outside agencies, and fellow employees. 
• Speaking effectively in a public forum on related topics and issues. 
• Prioritizing and scheduling workload to ensure completion when faced with deadlines or emergencies.
• Establishing and maintaining effective working relationships with those contacted in the course of work, including City and other government officials, community groups, and the general public; and apply safe work practices.

LICENSE AND CERTIFICATION REQUIREMENTS:

Possession of a valid Class "C" California driver's license. 

PHYSICAL DEMANDS AND WORKING ENVIRONMENT:

Work is performed in an office environment in close proximity to other workers.  Incumbent shall be exposed to those conditions normally encountered in a business office environment.  Physical demands require frequent standing, reaching, leaning, twisting, grasping, lifting and sitting for prolonged periods of time.  Must carry moderately heavy boxes up to 50 pounds and/or utilize a dolly.  Incumbent must be able to drive safely to various City sites.  Incumbent must be able to see and hear in the normal range, with or without correction.  Incumbent must have the stamina to work long hours and overtime, if assigned, and be willing to work an irregular schedule, which might include evenings, weekends, holidays, and varying hours.

Application deadline: Friday, July 19, 2024.

The South Placer Municipal Utility District is seeking an outstanding General Manager to lead its mission of protecting the public health and water environment, providing efficient and effective sanitary sewer services, and preparing for the future. The District has a reputation as a highly desirable District and has won numerous industry awards.

The General Manager is responsible for the day-to-day operations of the District and reports to a five member board. The General Manager plans, organizes, directs, and reviews the overall administrative activities of the District; advises and assists the Board; and represents the District’s interests at local, regional, State and Federal levels.

The ideal candidate will have a Bachelor’s Degree or higher from an accredited college or university in engineering, business, public administration or a closely related field; a Master’s Degree is desirable. Five years of professional experience at a senior-executive level in municipal utility systems, ideally with knowledge of wastewater maintenance systems and progressive responsibility in administration and operation of wastewater systems.

To view additional qualifications and submit your resume (reflecting years and months of employment including beginning/ending dates), cover letter, and a list of six work-related references (two supervisors, two direct reports, and two colleagues) please go to: https://www.cpshr.us/recruitment/2342

TO VIEW JOB ANNOUNCEMENT, CLICK JOB PDF OR JOB ANNOUNCEMENT URL BELOW.

The Town of Moraga values the contributions made by students of all ages and backgrounds and is seeking bright innovative, results-oriented individuals to join our Internship Program. This program has been developed to provide college, university or graduate students with the opportunity to gain both academic and practical experience working in local government. The internships are designed to provide the participants with the opportunity to apply academic skills to various “real world” assignments. Students will have the opportunity to learn about local government and the services they provide.

PLANNING INTERN JOB DESCRIPTION AND DUTIES

The Planning Intern will have the opportunity to assist in a variety of tasks and duties involved in day to day operations of the Planning Department. The Planning Department is responsible for overseeing and guiding development in the Town of Moraga.

Typical Duties:

• Assist staff with Town permit applications, land use and zoning information.
• Assist staff with reviewing and processing development proposals.
• Complying with county, state and federal land use and environmental programs and regulations.
• Provide staff assistance to the Planning Commission, Design Review Board and Town Council.
• Assist in preparation, maintenance and/or verification of accounting, financial, statistical records, logs, ledgers and files.
• Conducts research on projects, studies, reports and related information for decision-making process.
• Perform administrative work such as answering phones, copying, and filing.
• Performs other related duties as required that may not be specifically listed in the job description but are within the general responsibility level associated with this class.

The Finance Department is recruiting for the position of Accounting Technician (Electronic Payments Technician)

This recruitment will close on June 4, 2024 at 5:00 PM (PT) or when the first 150 applications are received, whichever comes first. Interested applicants are encouraged to apply immediately. A resume must be submitted with the completed online application.

Applications submitted without a resume may not be considered. Only online applications will be accepted.

The Position:
This is a journey level accounting technical class and has the ability to perform the full range of duties assigned, with only occasional instruction or assistance as unique situations arise. Employees at this level are fully aware of the operating procedures and policies within the work unit and receive general supervision from an assigned supervisor or manager. Positions in this class may exercise technical and functional supervision over assigned staff.

Ideal Candidate

• Possess knowledge and experience in the theories, principles and practices of financial accounting
• Exercise independent judgment in the course of daily responsibilities
• Demonstrate exceptional skill in written and oral communication
• Work effectively under deadlines
• Create and maintain detailed, accurate, and highly organized financial records
• Perform computational tasks and other technical functions with speed and accuracy
• Possess the ability to compile and reconcile financial data using Excel spreadsheets
• Establish and maintain effective working relationships with internal and external customers

Job Responsibilities: 

• Performs specialized technical and highly detailed work in the preparation, reviewing and processing of financial bank statements and other related documents.
• Assists in providing instruction to other department employees regarding specialized procedures and requirements.
• Administer the Citywide electronic payments program and assist with processing web payments.
• Preparing staff reports and other communication related adoption and implementation of new payment methods.
• Reviews various documents and reports related to area of assignment for accuracy, completeness and compliance with departmental policies, laws and other regulations.
• Prepare monthly spreadsheet of credit card/merchant services transactions and request journals to charge respective departments.
• Calculates and reconciles special assessments.
• Provides information to City employees and others that requires the use of judgment and the interpretation of policies, laws, rules and procedures related to area of assignment.
• Monitors, review and reconcile electronic banking systems (Bank of America, CashPro, Check 21) and internet payment processors/gateways across the City’s enterprise system platforms.
• Reviews and reconciles electronic payment activity with bank statements, the City’s financial management system and credit card transactions related to payments and disputes.
• Coordinates billing processes with other departments and acts as the department contact for credit card machine.
• Resolving technical challenges among the various system components (payment platform, gateway, bank, enterprise system vendors, City IT systems).
• Sets up and monitors accounting ledgers related to area of assignment.
• Reviews and corrects project accounting time sheets and error reports.
• Adjusts journal entries to properly record financial transactions.
• Ensures data integrity of ledger related reports.
• Maintains City investment and debt service portfolios including receipts and statements, broker confirmations, account analysis statements and interest payments.
• Builds and maintains positive working relationships with co-workers, other City employees and the public, using good principles of customer service.

THE POSITION

Perform professional civil engineering work in the planning, design, technical investigation, and construction of projects in public works, transportation, capital improvements, and structural engineering. An example of duties include:

• Participates in the preparation of plans and specifications for the construction of streets, storm drains, street lighting, traffic signals, buildings and related public works and City building projects; researches project design requirements; performs calculations and prepares estimates of material costs and time considerations.
• Researches publications and industry information sources.
• Develops and revises design and construction standards.
• Participates in the implementation of the City’s traffic and transportation engineering programs; prepares and revises plans and specifications for traffic related projects; prepares special studies and reports and coordinates major projects.
• Investigates field problems affecting property owners, contractors, and maintenance operations.
• Prepares estimates and feasibility reports for new or modified services and structures.
• Administers contracts and may assist with inspection services and project management for construction and maintenance projects.
• Participates in the plan check, review and processing of plans for private developments affecting streets, sewers, drains and related public works facilities and ensures that they meet all City imposed requirements.
• Prepares special engineering studies and reports.
• Coordinates planning, design, and construction activities with other City departments, divisions, and sections, and with outside agencies.
• Attends various staff and regional technical advisory meetings.
• Provides technical and professional assistance/support to other City departments and divisions, Planning Commission, and City Council as necessary.
• Performs other related duties as assigned.

MINIMUM QUALIFICATIONS

Equivalent to a Bachelor’s degree with major coursework in civil engineering or a closely related field;

OR

Possession of a current Engineer-in-Training Certificate, issued by the California State Board of Registration for Professional Engineers, and one (1) year of professional civil engineering experience.

License Requirements:

A valid California Class C driver license or higher with a satisfactory driving record is required at the time of appointment. Individuals who do not meet this requirement due to a disability will be reviewed on a case-by-case basis.

TO VIEW JOB ANNOUNCEMENT, CLICK JOB PDF OR JOB ANNOUNCEMENT URL BELOW.

The Application Programmer performs or assists in the design, documentation, coding, testing, and implementation of new application programs or enhancements to existing application programs consistent with the Software Development Life Cycle (SDLC) best practices and applicable computer programming standards and frameworks. The position is primarily responsible for the suite of Bid-to-Bill applications as well as other business applications in use by the Agency. The position will work with other developer staff and supervisor during probationary status to learn and develop proficiency in the use of the Agency's software development frameworks, processes, and documentation design standards.

ESSENTIAL DUTIES AND RESPONSIBILITIES
This position requires that the incumbent reports for work on time and maintains satisfactory attendance in accordance with Agency policy; Ensures work responsibilities are covered when absent; Arrives to meetings and appointments on time; Performs special assignments as assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Level I: 
This classification is an entry-level position that is not expected to perform with the same level of independence of direction and judgment as higher levels. The level I works closely with other senior-level CTAs and is often given direction to complete tasks, install and troubleshoot hardware and software, perform system upgrades, evaluate and apply patches to systems, work closely with customers, and provide application support through help desk requests, and creates and maintains documentation.

Level II: 
This classification requires having all Level I duties and responsibilities with a minimum of two years of experience in software application development. Level II receives occasional direction and guidance from other senior-level CTAs; otherwise, uses developed experience and professional judgment to successfully complete projects in accordance with defined requirements and established timelines.

Responsibilities:
•    Within a specific hardware and operating system environment, work to define and design the operating features of new programs or enhancements
•    Produce appropriate conceptual-level application documentation for review and approval by the supervisor
•    Produce appropriate programming documentation for the review of the Supervisor, with sufficient detail on which to base programming activities
•    Develop computer programs in accordance with design documentation, closely following coding standards and conventions used within NCPA
•    Test applications using prescribed test methodology and tools
•    Develop an implementation plan, prepare production rollout for approval by the supervisor, and coordinate with the Ops team to execute the rollout
•    Maintain and enhance software applications
•    Conduct independent communications with user departments in a cooperative and professional manner
•    Provide emergency system support outside normal working hours as needed, on a rotational basis with other department employees
•    Travel to NCPA remote field sites to provide support to remote users as needed 
•    Assist in the evaluation of proposed new or modified computer system hardware and software

MINIMUM QUALIFICATIONS

Level I:
Education and/or Experience      
Bachelor's degree in Computer Science, Management Information Systems, Computer Engineering, or related field from an accredited four-year college or university and at least six months of related programming experience and training.

Level II:
Education and/or Experience      
Bachelor’s degree in Computer Science, Management Information Systems, Computer Engineering or related field from an accredited four-year college or university and at least two years of related programming experience and training. A minimum of two years in design and programming experience including some experience programming interactive programs. Experience must include exposure to systems analysis techniques.

KNOWLEDGE AND ABILITIES 
Knowledge:
Knowledge of VB.Net and/or C# as core programming language is essential; Integrated development environment (IDE) such as Microsoft Visual Studio; Source control management tools such as Team Foundation Server (TFS) and Git; JavaScript, HTML5, and Cascading Style Sheets (CSS) for developing web pages is highly desired; Oracle PL/SQL, SQL-Server T-SQL or similar SQL experience and understanding of relational database principles. Knowledge of software testing methodologies and tools, computer equipment and capabilities, data communications and local area networking, and client-server software is essential; Principles and programming techniques used to implement online interactive applications, technical report writing, systems analysis techniques, database management concepts, and management information system concepts; DevOps and related best practices; and knowledge of the Component-based Scalable Logical Architecture (CSLA) is an advantage.

Abilities:
Ability to write moderately complex programs and develop detailed program specifications; Demonstrate an understanding of MVC (Model-View-Controller; Stay up to date with related software development technologies through training, product research, and participating in conferences and user groups. Ability to work effectively with a broad, diverse cross-section of peers and various individual personalities; listen effectively, communicate with, and maintain a professional working relationship with co-workers; communicate clearly, efficiently, and professionally both over the phone and in person; Maintain strong organizational skills; and the ability to complete quality and timely work with minimal supervision.

SPECIAL REQUIREMENTS

Valid California Driver's License and insurance. 

This job has no supervisory responsibilities.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this Job, the employee is regularly required to sit and view and operate a computer, use hands to finger, handle, or feel, reach with hands and arms, and talk or hear. Requires manual finger dexterity and eye-hand coordination to operate and adjust office equipment such as computers. The employee is occasionally required to stand and walk. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, color vision, and the ability to adjust focus.

The noise level in the work environment is usually quiet.

All employees are responsible for contributing to an inclusive, safe, and secure work environment that values diverse cultures, perspectives, and experiences and is free from discrimination.

The City of Burlingame is accepting applications for the position of Accountant I/II

Our diverse family of employees welcomes you to apply. We are a small city that gets a lot done, and each member of our team is vital to our success as an organization.

We recently asked our employees what they enjoyed most about working for the City of Burlingame, and their responses fell into five general categories:

• Colleagues
• Community
• Location
• The Work
• The Benefits

Browse the Burlingame Welcome Brochure for more information about why employees love  working here or view our City of Burlingame is a Great Place to Work Video: 

Welcome Brochure 

City of Burlingame is a Great Place to Work Video

The City of Belmont Public Works Department is recruiting for the position of Senior Civil Engineer. First review of applications will be May 28, 2024 with interviews scheduled for May 30 and 31, 2024.

Why join our Team?

It's exciting to be part of the Belmont Public Works team.  We are an energetic, collaborative group that share a passion for serving our community and improving the place we live and work.  We will provide you with a wide rage of opportunities in a team-based collaborative environment while helping you achieve your professional goals.

Check out the Public Works homepage for more information: Public Works - City of Belmont

What You'll Do

The Public Works Department is responsible for the City's major capital projects and infrastructure including streets, sidewalks, streetlights, traffic signals, sewer and storm conveyance systems, and pump stations.  The Department is also responsible for the efficient management of the City's traffic operations and review of right-of-way impacts associated with private developments.

Transportation is and continues to be of importance to our Department and the community.  Traffic congestion plagues many of the peninsula cities.  Belmont has taken a proactive approach by continuously looking for transportation improvements, such as roundabout design, multimodal enhancements, and an adaptive signal operation system on our main East-West connection, Ralston Avenue.  Another pivotal project is the development of a citywide Transportation Master Plan, to help guide the City for its future growth.

Private development has grown significantly in the City the last 5 years, including biolife sciences, housing, and mixed-use developments.  Most notable are the Conceptual Development Plan and Development for the Belmont Stanford Campus at Notre Dame de Namur University and the Annexation of the Harbor Industrial Area from the County of San Mateo.

This invitation is focused on recruiting a Senior Engineer for private development and permitting services.  Key assignments include leading staff and managing consultants and contractors through the private development process, as well as managing the permitting services.  However, the Senior Engineer may be assigned to work in any of the work areas mentioned above.

In addition, the Senior Engineer assists in preparing and monitoring operating budgets in connection with assigned programs and contract management.  Effective communication skills and the ability to recognize the interconnectedness of the various civil disciplines and stakeholders are critical to the success of this position.  This position is public-facing and may be needed in planning commissions and city council meetings.  This position involves direct supervision of a growing team of 3-4 staff members, which may include engineers, engineering technicians, and contract staff.

Generally, the Senior Civil Engineer supervises, assigns, reviews, and participates in the work of staff responsible for performing professional and technical engineering services in the design and management of public works capital improvement projects, private development, permitting and other services, ensuring high work quality and adherence to established policies and procedures.

Positions at this level are distinguished from other classes within the series by the level of responsibility assumed and the complexity of duties assigned.  Employees perform the most difficult and responsible types of duties assigned to classes within this series, including management of the most complex engineering projects or exercising lead direction over lower-level staff.  Employees at this level are required to be fully trained in all procedures related to assigned area of responsibility.

The responsibilities and duties of the Senior Civil Engineer may include, but are not limited to, the following:

• Plan, prioritize, assign, supervise, review, and participate in the work of staff responsible for providing professional engineering services in the design and management of public works capital improvement projects.
• Establish schedules and methods for providing engineering services, identify resource needs, review needs with appropriate management staff, and allocate resources accordingly.
• Participate in the development of policies and procedures, monitor work activities to ensure compliance with established policies and procedures, and make recommendations for changes and improvement to existing standards and procedures.
• Recommend and assist in the implementation of goals and objectives and implement approved policies and procedures.
• Perform the more technical and complex tasks of the work unit, including management and administration of construction and professional services contracts.
• Supervise and participate in the work of lower-level engineering staff in the preparation of project plans, specification, cost estimates, and contract administration for capital projects.
• Supervise and participate in the inspection of capital projects, ensure compliance with applicable codes and regulations and provide resolutions to construction problems.
• Prepare and/or review professional civil engineering designs for assigned projects utilizing a variety of computer software programs, perform detailed calculations and computations, and prepare and/or review the adequacy and accuracy of computations, preliminary layouts, and design work from field and survey data.
• Review and approve changes to approved plans and specifications and process a variety of permits.
• Exercise professional engineering judgment in accordance with current accepted practice of civil engineering and appropriate laws and codes.
• Participate in the selection of technical engineering staff, provide or coordinate staff training, work with employees to correct deficiencies, and implement discipline procedures.
• Participate in the preparation and administration of assigned engineering program budget, submit budget recommendations and monitor expenditures.

To review the complete job description, visit www.belmont.gov