Search Jobs

Please visit this link to view the job posting:

https://www.governmentjobs.com/careers/marinwater/jobs/4516970/field-pipeline-locator-intern?pagetype=jobOpportunitiesJobs

Located in Middletown, CA!

The Mechanic Operator position consists of five levels of competency.  Individuals can either enter into the classification at the beginning level of the job or somewhere between the entry level and the top step depending on the qualifications brought with them.  It is the expectation of NCPA that all employees progress to the top level.  In order to progress to the top level an employee must complete all components in a competency level within the associated training matrix.  Employees who successfully complete a training level matrix and who received a rating of “meets requirements” or higher by their immediate supervisor will be promoted when qualified.  Upon completion/demonstration of competencies employees will be expected to perform work in all completed levels and other job-related duties as required. All employees have the right to challenge any component in the training matrix by proving proficiencies verbally and practically.

General Scope of the Job
Under general supervision of the Mechanical Maintenance Supervisor and at times under the general direction of the Mechanic Operator Lead Person; to maintain, repair, adjust, install, and test, powerplant steam field, water injection systems and equipment and maintain lease site grounds.  The measure of accuracy and reliability is the safe, effective and efficient performance of the Facilities.  This position is predominately mechanic based with operation support as outlined below.

Description of Duties and Responsibilities
Level III:
This level of the Mechanic Operator position requires the completion of all Level III training requirements. The employee must perform the duties as described below and as defined in lower levels while attaining Level IV skills and experience through academic and hands-on training. Level III knowledge and skills focus on journey level mechanical duties and responsibilities.
•    Inspects, tests, calibrates, installs, rebuilds, adjusts, repairs and aligns all mechanical equipment such as hydraulic control systems, turbines, generators, cooling tower, pumps, electric motors, valves, gear reducers, compressors, blowers heat exchangers, HVAC systems excluding refrigerant replacement, fire protection systems, diesel and gas engines, mufflers, separators, traps, rock catchers, tanks, pipeline and pipe supports.
•    Maintains facility structures. 
•    Performs basic inspections and repairs various rigging equipment, fixtures and cranes.
•    Assists the scaffolding qualified journeyman in maintaining, and repairing scaffolding. 
•    Inspects and maintains safety devices such as harnesses and rescue equipment.
•    Works with Safety Manager to maintain records of regulated equipment.
•    Keeps accurate records of equipment history, reports and work orders on computer for CMMS.  Works with CMMS personnel for accuracy and reliability.
•    Performs preventative maintenance and assessments on various plant equipment.
•    Writes Work/Operating Procedures within area of expertise.
•    Requisitions replacement parts and supplies to carry out assigned tasks.
•    Makes working drawings of components and changes made to Plant systems relative to area of expertise.
•    Installs, inspects, tests, repairs, rebuilds, and maintains equipment such as portable and fixed site pumps, valves, mufflers, separators, traps, rock catchers, turbines, generators, motors, gear reducers, compressors and hydraulic control systems, pipelines, tanks, pipeline supports, effluent piping components.
•    Maintains lease site grounds structures, culverts, roads, drains and ditches.
•    Examines and diagnoses malfunctions or defective equipment on pumps, motors, valves, separators, vents, air vacuum breakers and compressors; disassembles/reassembles, overhauls and adjusts defective equipment
•    Installs, fits and calibrates equipment replacement parts.  Observes equipment operation.  Adjusts equipment to operational specifications using specialized tools and precision measuring instruments.
•    Disassembles, removes, repairs, replaces, assembles and aligns pipes, pipeline components, and valves repairing or replacing broken and worn parts using various hand tools.
•    Observes and directs contractors while digging trenches, cleaning tanks and maintaining lease site grounds.
•    Under the direction and training of operations, assists with clearances on steam field and effluent pipeline equipment for maintenance purposes.
•    Will be trained to Rig and lift equipment to install, repair or replace equipment.
•    Instructs and trains workers in repair and maintenance procedures of steam field, power plant and effluent pipeline equipment.
•    Maintains inventory of tools and materials for the maintenance work at the steam field and effluent pipeline.
•    Maintains steam field equipment records on work completed on CMMS or equivalent maintenance program.
•    Assists other classifications when needed.
•    Performs other job-related duties as required.
•    Acquire OSHA certified training to meet business needs.
•    Trains and advises other workers in the maintenance and operation of steam field and effluent pipeline equipment.
•    Maintains and repairs Hydraulic Control Systems.

Level IV:
This level of the Mechanic Operator position requires the completion of all Level IV training requirements for operational duties and responsibilities.  The employee must perform the duties as described below and as defined in lower levels while attaining Level V skills and experience through academic and hands-on training.
•    Reviews, coordinates and reports work orders, work activities and equipment clearances with appropriate personnel.  
•    Checks equipment to be cleared in advance to guarantee its condition to others.  Informs Operator Technician Lead Person and Supervisors of the status of equipment and systems.  
•    Under direction of the Operator Technician Lead Person or a designee, operates various equipment and performs basic equipment clearances on low voltages (<600 volt) electrical breakers, steam line equipment and effluent equipment.  
•    Terminates and connects motor wiring to facilitate bearing repairs (less than 600 volts.).
•    Conducts online test of equipment before certifying its status and performance.

Machinist Duties and Responsibilities
•     Sets up and operates machine tools to repair or reproduce equipment parts and fittings working from blueprints or defective parts using precision tools and measuring instruments.
•    Fabricates special tools, rigging equipment and replacement parts to repair equipment.   
•    Fabricates, modifies, shapes and repairs equipment parts using a variety of metal working machines.
•    Chips, grinds, bores, and drills equipment parts.
•    Verifies conformance of finished work piece to specifications, using precision measuring instruments.
•    Calibrates, fits and assembles equipment parts according to drawings and specifications using machine tools, power tools, and measuring instruments.
•    Installs machined replacement parts; starts and observes equipment operation to detect malfunctions or out-of-tolerance performance, adjusts as necessary.
•    Maintains shop equipment and tools.
•    Maintains inventory of machining tools.

Representative Physical and Job Demands
•    Regularly talks and listens to others to exchange and obtain information to direct the operation and maintenance of Geothermal Facility steam field and effluent equipment.
•    Regularly reaches, grasps, pushes and pulls various wrenches, hand tools, and other objects using manual dexterity and eye hand coordination to operate and maintain equipment.
•    Regularly climb ladders and walks on platforms near high temperature surfaces; works on slippery or uneven surfaces in precarious places.
•    Frequently walks, reaches, kneels and crouches using feet, legs, hands and manual strength to access and operate plant equipment.
•    Occasionally lifts and moves pumps motors and pipe weighing up to 50 pounds.
•    Routinely works near heated surfaces; works on slippery or uneven surfaces in precarious places to adjust or operate equipment.
•    Occasionally exposed to high voltage and other electrical hazards while working on equipment.
•    Routinely works in outside weather conditions and is exposed to chemicals, wet and humid conditions, extreme cold and heat while inspecting and maintaining equipment.  The noise level is frequently very loud.
•    Routinely listens to operating sounds of equipment to diagnosis equipment malfunctions.
•    Frequently operates forklifts cranes, air compressors, sandblasters and power tools to maintain and repair equipment.
•    Frequently operates Agency vehicles going to and from job locations.

Job Expectations
Acquisition and Use of Technical Knowledge
•    Possesses or acquires as needed the ability to detect, diagnose disassemble and repair steam and water equipment with a fundamental knowledge of; turbine equipment, and auxiliary systems and their capabilities; operation processes, mechanical and electrical theory and background to operate equipment; measuring devices and hand tools for maintenance work; general contamination and control practices and procedures; basic math, geothermal powerplant rules and regulations; clearance procedures, physics including pump mechanics; basic principles of thermodynamics and fluid flow.  Given this basic knowledge, understands own role within the plant and how that role requires the use of knowledge applied to practical, day to day, operations and maintenance demands.  Hold self-accountable to acquire knowledge that may be needed when a job situation changes, new tasks are introduced to the job, or when improved performance requires acquiring extended or specialized information.
•    Possesses or acquires as needed an extensive knowledge of safety, fire, and security rules and procedures.  Given the emphasis of safety at the plant, uses knowledge to improve plant conditions and the organization’s safety record.
•    Acquires knowledge of operations and maintenance procedures on a continuing basis to stay current as a significant contributor to plant solutions, safety performance, and operations and maintenance improvements.
•    Confers with Operator Technician Lead Person or Operations Supervisor to resolve system problems and offers a variety of workable solutions to complex problems and report status of systems and equipment.  
•    Identifies problems or trends with systems and equipment early to prevent operator or electrical errors. 
•    Passes knowledge on to other employees as a way to contribute to the performance of others, or get a job done.
•    Assesses own limitations with the fundamental knowledge needed to perform in the job.

Application of Technical and General Job Skills
Technical and job skills are indicated by demonstrating an ability to:
•    Efficiently and effectively operate, control, and maintain equipment, and be accountable for aspects of the job at the Geothermal Facility. 
•    Implement or use existing methods to control the waste of time, money and material resources, such as:
o    Acting to improve work procedures 
o    Conserving resources 
o    Expediting a job
o    Completing a work assignment efficiently
o    Completing long term work in an orderly fashion
•    Work with management to identify and learn from mistakes made and apply what is learned to future situations or plant conditions.
•    Establish and maintain effective work relationships with those contacted in the performance of required duties.
•    Review own action to determine the cause of poor working relationships so those relationships can be improved
•    May be required to work extended hours and on normal days off.
•    Operate Agency vehicles and equipment safely.

Training and Experience Requirements
Level III: Completion of the NCPA Level III training program or three years of equivalent journey-level mechanical experience.
Level IV: Completion of the NCPA Level IV training program or three years of equivalent journey-level mechanical experience and operations experience.

Driver’s License Requirement
Possession of an unrestricted Class C California operator’s license issued by the State of California, Department of Motor Vehicles.  Possession and maintenance of a good driving record as demonstrated by the absence of multiple or serious traffic violations or accidents within the last three (3) years.

Desired Qualifications 
•    Possession, or ability to obtain with training, a Class A California operator’s license issued by the State of California Department of motor Vehicles.
•    Ability to set up and operates machine tools to repair or reproduce equipment parts and fittings working from blueprints or defective parts using precision tools and measuring instruments.
•    Ability to Fabricate special tools, rigging equipment and replacement parts to repair equipment.   
•    Ability to Fabricate, modifies, shapes and repairs equipment parts using a variety of metal working machines.
•    Chips, grinds, bores, and drills equipment parts.
•    Verifies conformance of finished work piece to specifications, using precision measuring instruments.
•    Calibrates, fits and assembles equipment parts according to drawings and specifications using machine tools, power tools, and measuring instruments.
•    Installs machined replacement parts; starts and observes equipment operation to detect malfunctions or out-of-tolerance performance, adjusts as necessary.

EOE

The Application Programmer performs or assists in the design, documentation, coding, testing, and implementation of new application programs or enhancements to existing application programs consistent with the Software Development Life Cycle (SDLC) best practices and applicable computer programming standards and frameworks. The position is primarily responsible for the suite of Bid-to-Bill applications as well as other business applications in use by the Agency. The position will work with other developer staff and supervisor during probationary status to learn and develop proficiency in the use of the Agency's software development frameworks, processes, and documentation design standards.

ESSENTIAL DUTIES AND RESPONSIBILITIES
This position requires that the incumbent reports for work on time and maintains satisfactory attendance in accordance with Agency policy; Ensures work responsibilities are covered when absent; Arrives to meetings and appointments on time; Performs special assignments as assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Level I: 
This classification is an entry-level position that is not expected to perform with the same level of independence of direction and judgment as higher levels. The level I works closely with other senior-level CTAs and is often given direction to complete tasks, install and troubleshoot hardware and software, perform system upgrades, evaluate and apply patches to systems, work closely with customers, and provide application support through help desk requests, and creates and maintains documentation.

Level II: 
This classification requires having all Level I duties and responsibilities with a minimum of two years of experience in software application development. Level II receives occasional direction and guidance from other senior-level CTAs; otherwise, uses developed experience and professional judgment to successfully complete projects in accordance with defined requirements and established timelines.

Responsibilities:
•    Within a specific hardware and operating system environment, work to define and design the operating features of new programs or enhancements
•    Produce appropriate conceptual-level application documentation for review and approval by the supervisor
•    Produce appropriate programming documentation for the review of the Supervisor, with sufficient detail on which to base programming activities
•    Develop computer programs in accordance with design documentation, closely following coding standards and conventions used within NCPA
•    Test applications using prescribed test methodology and tools
•    Develop an implementation plan, prepare production rollout for approval by the supervisor, and coordinate with the Ops team to execute the rollout
•    Maintain and enhance software applications
•    Conduct independent communications with user departments in a cooperative and professional manner
•    Provide emergency system support outside normal working hours as needed, on a rotational basis with other department employees
•    Travel to NCPA remote field sites to provide support to remote users as needed 
•    Assist in the evaluation of proposed new or modified computer system hardware and software

MINIMUM QUALIFICATIONS

Level I:
Education and/or Experience      
Bachelor's degree in Computer Science, Management Information Systems, Computer Engineering, or related field from an accredited four-year college or university and at least six months of related programming experience and training.

Level II:
Education and/or Experience      
Bachelor’s degree in Computer Science, Management Information Systems, Computer Engineering or related field from an accredited four-year college or university and at least two years of related programming experience and training. A minimum of two years in design and programming experience including some experience programming interactive programs. Experience must include exposure to systems analysis techniques.

KNOWLEDGE AND ABILITIES 
Knowledge:
Knowledge of VB.Net and/or C# as core programming language is essential; Integrated development environment (IDE) such as Microsoft Visual Studio; Source control management tools such as Team Foundation Server (TFS) and Git; JavaScript, HTML5, and Cascading Style Sheets (CSS) for developing web pages is highly desired; Oracle PL/SQL, SQL-Server T-SQL or similar SQL experience and understanding of relational database principles. Knowledge of software testing methodologies and tools, computer equipment and capabilities, data communications and local area networking, and client-server software is essential; Principles and programming techniques used to implement online interactive applications, technical report writing, systems analysis techniques, database management concepts, and management information system concepts; DevOps and related best practices; and knowledge of the Component-based Scalable Logical Architecture (CSLA) is an advantage.

Abilities:
Ability to write moderately complex programs and develop detailed program specifications; Demonstrate an understanding of MVC (Model-View-Controller; Stay up to date with related software development technologies through training, product research, and participating in conferences and user groups. Ability to work effectively with a broad, diverse cross-section of peers and various individual personalities; listen effectively, communicate with, and maintain a professional working relationship with co-workers; communicate clearly, efficiently, and professionally both over the phone and in person; Maintain strong organizational skills; and the ability to complete quality and timely work with minimal supervision.

SPECIAL REQUIREMENTS

Valid California Driver's License and insurance. 

This job has no supervisory responsibilities.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this Job, the employee is regularly required to sit and view and operate a computer, use hands to finger, handle, or feel, reach with hands and arms, and talk or hear. Requires manual finger dexterity and eye-hand coordination to operate and adjust office equipment such as computers. The employee is occasionally required to stand and walk. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, color vision, and the ability to adjust focus.

The noise level in the work environment is usually quiet.

All employees are responsible for contributing to an inclusive, safe, and secure work environment that values diverse cultures, perspectives, and experiences and is free from discrimination.

Final Filing Date:  First review of applications will be on June 7, 2024. NCPA reserves the right to close this posting once a sufficient number of applications have been received.
 

Under the direction of the IS Operations & Support Assistant Manager, the Database Administrator architects, tests, implements, maintains, and documents Agency databases. The database administrator collaborates closely with IS development and Agency operations personnel to provide backend database solutions for custom applications, including real-time, scheduling, and settlement programs. The database administrator troubleshoots and provides solutions for database problems.

Level III
This classification supports and maintains the Agency’s database infrastructure and related applications. Administers all database objects, including but not limited to schemas, tables, clusters, indexes, and views. Performs database re-organizations as needed to improve performance. Performs impact analysis of changes to be made to database objects before implementing significant schema changes. Ensures security for all databases by creating roles and associated privileges. Controls and monitors user access to databases. This is a journey-level position and is given minimal direction in job duties and responsibilities.  

Level IV
Architects and designs the Agency’s database infrastructure and ensures the highest levels of availability. Leads database projects to establish new database architectures. Oversees upgrades and implementations of new databases or related software.   Position can perform all lower level requirements and works independently with very little direction May be called upon to provide reports or present to the Agency’s Information Technology Committee. May direct the work of lower classifications.     

ESSENTIAL DUTIES AND RESPONSIBILITIES
This position requires that the incumbent reports for work on time and maintains satisfactory attendance in accordance with Agency policy; Ensures work responsibilities are covered when absent; Arrives to meetings and appointments on time; Performs special assignments for the Assistant Manager, Information Services or others as assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Responsibilities:
Design, create and maintain all Oracle databases required for development, testing, and production usage. 

Install, configure, upgrade, and troubleshoot Database server software for both stand-alone instances and Real Application Clusters (RAC). Includes patching both Oracle and Windows. 

Administer all database objects, including schemas, tables, clusters, indexes, views, sequences, constraints, packages, and procedures. This includes creating primary database storage structures (tablespaces) and primary objects (tables, views, indexes). Manage the sharing of resources between applications. 

Troubleshoot problems regarding the databases, servers, applications and development tools. Open technical support cases with support as needed and serve as primary support contact for NCPA. 

Perform capacity planning for all databases. Work closely with IS storage and system administration staff to plan and allocate database system storage. 

Experienced with creating, managing, and maintaining data warehouse technologies.

Perform ongoing monitoring and tuning of all database instances and Windows servers to optimize database performance and reliability. 

Plan and implement backup and recovery of Agency databases. Maintain remote standby databases using archive logs.

Implement and enforce security for all of the Databases through creating and maintaining users and roles, and assigning privileges. Control and monitor user access to the database. 

Perform database re-organizations as required to improve performance and ensure maximum uptime of the database. Modify the database structure from information given by application developers. Gather statistics, create indexes, create or expand tablespaces as needed. 

Perform SQL and PL/SQL tuning and performance monitoring. 

Set up and maintain documentation and standards for database practices and procedures. 

Provide technical support to application developers and database users. 

Perform impact analysis of changes to be made to database objects. Approve and implement/oversee significant schema changes and changes to database design. 

Provide support during non-standard hours (on an as-needed basis, on-call 24x7x365). 

Provide a strategic database direction for the organization.

MINIMUM QUALIFICATIONS

Level III:
Education and/or Experience
A bachelor’s degree from an accredited four-year college or university in Computer Science, Management Information Systems, Engineering, or a related field and five or more years of related experience and/or training, or an equivalent combination of education and experience.

Level IV: 
Education and/or Experience 
A bachelor’s degree from an accredited four-year college or university in Computer Science, Management Information Systems, Engineering, or a related field and eight or more years of related experience and/or training, or an equivalent combination of education and experience.

KNOWLEDGE AND ABILITIES 

Knowledge:
Knowledge of Oracle database; Oracle Recovery Manager (RMAN), Real Application Clusters (RAC); Oracle Automatic Storage Management (ASM), SQL, PL/SQL; Microsoft SQL Server; Windows; networking; virtual machines; batch/cmd scripting; PowerShell, SQL*Plus; Toad, GIT; physical database design; relational database theory; disaster recovery; back-up and recovery, relational database theory; Windows and Linux system administration; the Oracle optimizer and execution plans; troubleshooting and debugging, networking (TCP/IP), database security.

Abilities:
Ability to write complex programs and develop detailed program specifications; Ability to analyze data and situations, reason logically and creatively, identify problems, draw valid conclusions, and develop effective solutions; Ability to apply creative thinking in the design and development of methods of processing data with electronic computers; Ability to establish and maintain cooperative working relationships with those contacted in the course of the work; Ability to communicate effectively verbally and in writing, and prepare effective reports.

SPECIAL REQUIREMENTS

Valid California Driver's License and insurance as occasional travel may be required. 
While performing the duties of this job, the employee is regularly required to sit. The employee is occasionally required to stand and walk. Occasionally, the employee may be required to perform simple grasping and fine manipulation, use telephone, write or use a keyboard to communicate, crouch, crawl, reach and lift equipment up to 40 lbs. 

Level III: This job has no supervisory responsibilities. 

Level IV: This job may have supervisory responsibilities.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The noise level in the work environment is usually moderate.

All employees are responsible for contributing to an inclusive, safe, and secure work environment that values diverse cultures, perspectives, and experiences and is free from discrimination.
 

Building Inspector I/II

Level I:  $6,200 – 7,536 per month

Level II:  $6,842 - $8,317 per month

Plus Excellent Benefits

APPLICATION DEADLINE: Apply by Tuesday, May 28, 2024, for first consideration

The City of San Rafael is recruiting for a Building Inspector to work in our Community Development Department.  Under the direction of the Chief Building Official, the Building Inspector I/II inspects buildings, reviews plans and specifications in the enforcement of laws regulating the construction of buildings in the City of San Rafael, issues building permits and collects fees. 

Building Inspector I:  This class performs the more routine tasks and duties including inspections of residential construction and less complex commercial and industrial properties.  This class is typically used as an entry-level class.  Employees in this class may have limited or no directly related work experience.

Building Inspector II:  This class performs the full range of duties as assigned including all types, sizes and complexities of commercial, industrial and residential construction, including accessibility compliance.  Employees at this level receive only occasional instruction or assistance as new or unusual situations arise and are fully aware of the operating procedures and policies of the work unit.  Positions in this class shift away from office and group fieldwork to more defined, independent work. 

THE CITY is focused on enhancing our community members’ quality of life through well-designed services and a positive workplace culture.  San Rafael is the economic and cultural heart of Marin County, and its high quality of life is centered on its commercial districts, engaged neighborhoods, active lifestyle, and natural environment.  San Rafael (population 61,000) is a full-service city with a city council/city manager form of government with 12 departments, more than 400 employees, and an annual budget of $172 million.  The City’s vision is to be a vibrant economic and cultural center reflective of its diversity.  The City Council is engaged and seeks to strengthen the urban and commercial areas as well as sustain the beautiful natural environment. 

San Rafael’s Organizational culture framework is an initiative called “Together San Rafael.”  City employees are our greatest asset, and we seek talented individuals with diverse backgrounds who are creative, curious, and excited about a challenge.  We are a results-driven team focused on the needs of community members.  The Together San Rafael initiative is focused on modernizing City services and increasing the engagement of employees.  This initiative recognizes the interconnectedness of the customer and employee experience. 

ESSENTIAL DUTIES AND RESPONSIBILITIES:  This list is intended to be illustrative and does not represent an exhaustive list of duties and responsibilities.  Incumbents may not perform all duties and responsibilities listed.  Other duties may be assigned.

• Issues building permits at the front counter.
• Review plans for completeness and accuracy before issuing permits.
• Makes inspections in the field of building construction, plumbing, electrical, mechanical, Green Building, and energy, in residential, commercial, industrial, and public buildings.
• Conducts final inspections in the field of completed buildings giving approval to acceptable standards.
• Investigates complaints of building code or County code violations and issues “Stop Work” orders or “Notice of Violation” in situations of non-compliance.
• Coordinates inspection and investigation activities with other departments and external agencies as required. 
• Tours City checking structures for compliance with building codes.
• Provides information to the public regarding requirements.
• Explains code or ordinance requirements to City personnel, builders, architects, contractors, and the public.
• Maintains files and reports concerning inspection activities and findings.
• Prepares written reports and notices pertaining to code violations.
• Performs related duties as required.

KNOWLEDGE OF/ABILITY TO:

• Federal, State and Municipal Codes, ordinances and regulations relating to building plumbing, electrical, mechanical, Green Building and energy.
• California Building, Plumbing, Electrical, Mechanical, Green and Energy Codes.
• Principles, techniques of building inspection and engineering mathematics.
• Accepted safety standards and methods of construction.
• Accessibility requirements.
• Effectively read blueprints and construction drawings.
• Resolve disputes concerning code requirements and effect compliance.
• Use tact and good judgment effectively in dealing with people involved with building construction, particularly contractors, architects, developers, engineers, and r=property owners.
• Review construction plans and conduct field inspections of buildings, improvements, and site development projects.
• Analyze, interpret and accurately review building plans and specifications.
• Make sound decisions in a manner consistent with the essential job functions.
• Prepare clear and comprehensive written reports.
• Maintain cooperative working relationships with engineers, architects and contractors, officials, employees and the general public.
• Apply building related codes and ordinances, including the California Building, Plumbing, Electrical, Mechanical, Green Building, Energy, Accessibility, and local zoning codes.

LANGUAGE/MATHEMATICAL/REASONING SKILLS:

• Ability to read and interpret documents such as rules, operating and maintenance instructions and procedure manuals.
• Ability to write routine reports and correspondence.
• Ability to speak to contractors, architects, homeowners, and other employees.
• Ability to calculate figures and amounts such as discounts interest, commissions, proportions, and percentages.
• Ability to apply concepts of basic geometry and algebra.
• Ability to solve practical problems and deal with a variety of concrete variables in situations where standardization exists.
• Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form.

EDUCATION AND/OR EXPERIENCE:

Building Inspector I:

• Graduation from an accredited high school or equivalent based on courses taken from an accredited education institution.  Additional qualifying experience may be substituted for the required education on a year-for-year basis, AND
• Two (2) years of responsible experience in a variety of building construction work or as a licensed general contractor.  A college degree in a construction-related subject or building inspection program may substitute for one year of the experience.

Building Inspector II:

• Graduation from an accredited high school or equivalent based on courses taken from an accredited education institution.  Additional qualifying experience may be substituted for the required education on a year-for-year basis, AND
• Five (5) years of progressively responsible experience in a variety of building construction work or as a licensed general contractor.  A college degree in a construction-related subject or building inspection program may substitute for one year of the experience, AND
• At least two (2) years must be in an inspection capacity equivalent to a Building Inspector I for a government agency.

CERTIFICATES/LICENSES/REGISTRATIONS (SPECIAL REQUIREMENT):

• Ability to obtain a California driver’s license and maintain a satisfactory driving record; AND ONE of the following:

Building Inspector I:

• Must hold or obtain within one-year of hire an International Code Council (ICC) B1 Residential Building Inspector or B2 Commercial Building Inspector certification and must maintain certification through the entire term of employment in this job classification. 

Building Inspector II:

• At time of hire/promotion into this classification, must hold an International Code council (ICC) B1 Residential Building Inspector or B2 Commercial Building Inspector certification.  Within one (1) year of hire/promotion into this classification, must obtain one or more of the following ICC certifications:
  • P1 Residential Plumbing Inspector
  • M1 Residential Mechanical Inspector
  • E1 Residential Electrical Inspector
  • Or, the commercial equivalent.
• Must maintain both certifications through the entire term of employment in this job
  classification.
• Additional ICC certifications including RS Residential Combination Inspector or C5 Commercial Inspector and the California Accessibility Specialist (CASp) are highly desired. 

PHYSICAL DEMANDS:

The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.  Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.  While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear.  The employee frequently is required to climb or balance and stoop, kneel, crouch, or crawl.  The employee must regularly lift and/or move up to 25 pounds and occasionally lift and/or move up to 100 pounds.  Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus.

WORK ENVIRONMENT:

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.  While performing the duties of this job, the employee is regularly exposed to outdoor weather conditions and regularly works in inside environmental conditions.  The employee is occasionally exposed to moving mechanical parts.  The noise level in the work environment is usually moderate but occasionally loud.  The nature of the work requires the individual to climb ladders or scaffolding in order to access and walk on rooftops.  A sense of balance is required to walk on pitched rooftops.  The job also requires the ability to access and enter cramped quarters such as crawl spaces located under homes, or spaces such as attic areas. Working within the crawl space may bring the Building Inspector into contact with reptiles, insects and/or rodents.  While conducting an inspection, it may require the incumbent to walk over rough, uneven, and rock surfaces. 

APPLICATION AND SELECTION PROCESS:

City of San Rafael application is required.  Resumes do not substitute for the City application. Candidates should detail related education and experience on the application since this information will be used to determine who will be invited to participate in the next phase of the examination process.  The examination process may include any or all of the following: application appraisal, written examination, oral board interview examination and/or performance examination. Note:  Prior to appointment, the candidate must pass a pre-placement physical examination, drug screen, in-depth background check, and fingerprinting. 

To file an application online, go to www.calopps.org.  Select “Member Agencies”.  Select “San Rafael”.  Or, follow this link to submit your application:   https://www.calopps.org/san-rafael/job-20502788.

Reasonable Accommodation:  The City of San Rafael will make reasonable accommodations in the exam process to accommodate disabled applicants.  If you have a disability for which you require accommodation, please contact us at (415) 485-3474 before the oral board date.

To perform a variety of semi-skilled and skilled tasks in the construction, maintenance, and repair of streets, sidewalks, signs, water meters, sewers, storm drains, pump stations and tree maintenance. 

The purpose of this recruitment is to hire a Temporary / Part-Time position.  Applicants who do not meet the minimum qualifications for the Maintenance Worker I position may be considered for employment as an Intern.  Temporary / Part-Time employees work no more than 130 hours per month AND 960 hours per fiscal year. Typical work schedule will be three 8-hour shifts per week, excluding weekends and evenings.

IDEAL CANDIDATE

The Ideal Candidate for this position should have previous Road Maintenance experience; sidewalks, driveways, roads, curbs, and gutters, although not required. The Ideal Candidate will be able to follow directions, demonstrate good communication skills (orally and in writing), be flexible, arrive on time, have good attendance, a positive attitude, be able to work independently with limited supervision, and a willingness to take on and learn new skills. Possessing a Class B commercial Driver’s license is desired, though not required upon hire. 

ESSENTIAL JOB FUNCTIONS

Operate a variety of light and moderately heavy construction and maintenance equipment including such pieces as a loader, dump truck, water truck, rubber-tired and steel rollers, rubber-tired tractor with all attachments (except backhoe attachment), striping equipment, and trencher in order to perform a variety of routine construction and maintenance operations.  Spread asphalt in patching and repairing streets.  Use concrete cutting equipment; operate a jackhammer; pour and finish concrete; construct concrete forms and perform rough carpentry work.  Paint and install traffic markings on streets, crosswalks, parking lots, and curbs; operate a striping truck; manufacture and install traffic signs and remove signs no longer required.  Install and remove traffic control barricades and cones.  Assist in a variety of tree maintenance activities including low limb, stump routing, tree watering, and tree planting.  Utilize proper safety precautions and comply with policies and procedures in the Department Illness and Injury Prevention Program.  Operate equipment and vehicles with possession of all necessary licenses and certificates.  Regular and consistent attendance.

OTHER JOB FUNCTIONS

Respond to inquiries from the general public.  Clean storm grates and drains.  Perform work in emergency situations as required.  Perform minor and preventive maintenance on paint spraying equipment, compressors, sprayers, compactors, and other construction equipment.  Work cooperatively with others.  Perform related duties as assigned.

QUALIFICATIONS

Maintenance Worker I

Education:  High School diploma or equivalent.

Experience:  One (1) year of work experience in construction or related field.

License or Certificate:  Possession of a valid California Driver's License required upon hire.  Class B permit and DMV Medical Certification are required within three months of hire.  A valid Class B California driver's license, Completion of Work Zone Safety certification issued by the International Municipal Signal Association, First Aid and CPR Certifications required prior to permanent appointment.

APPLICATION

Apply with a City of Woodland application by visiting www.cityofwoodland.gov/employment or the Human Resources Office, City Hall, 300 First Street, 2nd Floor, Woodland, CA 95695 by 5PM on Friday, May 24, 2024.  Résumés and cover letters are encouraged but will not be accepted in lieu of the application form. Postmarks will not be accepted.  

Review Process:  Based on the information provided in the application documents, the best qualified applicants will be invited for further examination.  All applicants meeting the minimum qualifications are not guaranteed advancement through any subsequent phase of the examination.  Depending upon the number of applications received, the examination may consist of an application screening, written and/or practical exam, oral interview or any combination thereof.

If you have a disability that requires accommodation during the selection process, please notify Human Resources at least seven (7) days prior to the event.

SALARY

Maintenance Worker I          
$21.12 – $26.96 per hour

Intern                                      
$16.50 – $20.50 per hour

Offered position and starting salary based on education, training and years of experience

BENEFITS

The pay cycle is bi-weekly.  With the exception of worker's compensation coverage and sick leave accrual, no other benefits compensations are provided. Employees must contribute 1.45% of salary to Medicare and 7.5% to a retirement plan in accordance with Federal Law.

This position is Temporary / Part-Time, working no more than 130 hours per month and no more than 960 hours per Fiscal Year.

The City of Woodland hires only U.S. citizens and individuals lawfully authorized to work in the U.S.  The City of Woodland is an Equal Opportunity Employer

The City of Woodland offers a competitive total compensation package including:
 

• Starting income ranging from $3,846.76 to $5,554.69 per month based on skills, training, certifications and years of experience, with regular, incremental pay increases
• Robust Retirement Program including CalPERS Retirement Plan, Retirement Health Savings Plan, choice of 457 Deferred Comp plans with a 2% City-Paid contribution
• Low-Cost & No-Cost Health Benefits, including choice of CalPERS Medical plans, and City-paid Dental Insurance, Vision insurance and Employee Assistance Program
• Paid Career Development, including City-paid Professional Growth Incentive, City-provided training & professional advancement opportunities
• Home-Life Balance, inclusive work environment and predictable work schedule, as well as paid holiday, vacation, and sick leaves

To perform a variety of semi-skilled and skilled tasks in the construction, maintenance, and repair of water lines, sewers, storm drains, and pump stations.  The purpose of this recruitment is to fill multiple vacancies in the Sanitary Sewer/Storm Drainage Systems Division, as well as establish an eligibility list for future vacancies.  Initial position and salary of the selected candidate will be based on previous work experience and valid licenses/certificates. 

IDEAL CANDIDATE

The City of Woodland is looking to fill multiple Utilities Maintenance Worker I/II positions in the Public Works Sanitary Sewer/Storm Drainage Systems Division.  The Ideal Candidate for the current vacancy is someone who has a good understanding of all aspects of underground sewer/storm drain maintenance and repairs, and is familiar with the operation of light and heavy equipment.  This position requires a “team player” with good interpersonal, time management, and communication skills.  Candidate must be able to follow direction and display good judgment, as well as be organized, flexible, approachable, resourceful, and a positive team contributor.  Current and valid distribution certifications and Class A/B commercial driver’s license are highly desirable.

Utilities Maintenance Worker I:

This is the entry level class in the Utilities Maintenance Worker series.  The Utilities Maintenance Worker I may often perform many of the duties required of Utilities Maintenance Workers II but is not expected to have the depth of experience, skill level and certifications of the Utilities Maintenance Worker II. As a result, the Utilities Maintenance Worker I will have fewer opportunities to exercise independent discretion and judgment on matters related to work procedures and methods.

Utilities Maintenance Worker II:

This is the Journey level in the Utilities Maintenance Worker series. This class differs from Utilities Maintenance Worker I in that incumbent perform more complex maintenance duties including working independently, exercising judgment, and operating the full range of tools and mechanical equipment related to a specific assignment.  The Utilities Maintenance Worker II may also be expected to assist in the oversight and training of less experienced personnel. Positions in this class are flexibly staffed and are normally filled by advancement from the I level, or by candidates with prior work experience elsewhere.

ESSENTIAL JOB FUNCTIONS 

Operate a variety of light and moderately heavy construction and maintenance equipment including such pieces as a loader, dump truck, water truck, steel rollers, High Velocity Vacuum Cleaner, mole trencher, and rubber-tired tractor with all attachments in order to perform a variety of routine construction and maintenance operations.  Operate fork lift as assigned and trained.  Perform general maintenance and repair on water distribution and/or storm and wastewater collection facilities including installation, testing, and backfill of service laterals.  Within the sewer and stormwater collections division, employees will be expected to use the Closed-Circuit Television Truck, sewer cable machine, flush sewer laterals and mains, assist in sewer tap installations, clean storm drain lines and catch basins. Within the water distribution division, employees will be expected to assist in water tap installations, install, remove, and repair water meters, hydrants, service valves, and mainline valves; take water meter and gauge readings; accurately maintain records and reports.  All Utilities Maintenance Worker I/II will operate equipment and vehicles with possession of all necessary licenses and certificates, utilize proper safety precautions related to all performed work and comply with the policies and procedures in the department Injury & Illness Prevention Program (IIPP). Regular, predictable, consistent and timely attendance is an essential function of the position, in that employee must be present to work on facilities and equipment impacting the public’s health and safety.

OTHER JOB FUNCTIONS 

Respond to inquiries from the general public. Prepare as built sketches, when required to convey information to engineering for graphic documentation. Check water meters for proper operation; troubleshoot registers and repair. Initiate and discontinue water service to customer accounts as directed. Operate telemetering and flow monitoring equipment. Work cooperatively with others. Perform related duties as assigned. Both Assignments will require employees to be “On Call” as needed.

QUALIFICATIONS

Utilities Maintenance Worker I

Education: High School Diploma or equivalent.  Courses in, or graduation from, the American Public Works Association’s Public Works Institute is desirable

Experience:  One (1) year of experience in construction or related field.

License and Certificate:  Requires possession of a California State Drinking Water Operator Certification Program (DWOCP) Grade I Water Distribution Operator (D1) and a Grade I Wastewater Collections System Maintenance certificate issued by California Water Environment Association prior to permanent appointment. 

A Pipeline Assessment and Certification Program certificate issued by the National Association of Sewer System Companies (NASSCO) is desirable.

Requires possession of a valid California Driver's License.  A Class B Driver’s permit and DMV Medical Certification are required within three (3) months of hire.  Employee must obtain a valid Class B Driver's License, a Work Zone Safety certification issued by the International Municipal Signal Association, First Aid and CPR certifications, Competent Person certification, and Confined Space certification prior to permanent appointment.

Utilities Maintenance Worker II

Education:  High School Diploma or equivalent.  Courses in or graduation from the American Public Works Association’s Public Works Institute is desirable

Experience:  One (1) year of experience performing duties comparable to those of a Utilities Maintenance Worker I.

License and Certificate:  Requires possession of a California State (DWOCP) Grade I Water Distribution Operator (D1) and a Grade II Wastewater Collections System Maintenance certificate issued by California Water Environment Association upon hire.

Requires all of the certifications necessary for a Utilities Maintenance Worker I and possession of a valid Class B California Driver's License with Tank and Air Brake Endorsement upon hire.

APPLICATION

Apply with a City of Woodland application by visiting www.cityofwoodland.org/employment or the Human Resources Office, City Hall, 300 First Street, 2nd Floor, Woodland, CA 95695.   Recruitment is Open Until Filled.  First review of applications is scheduled for Friday, May 10, 2024.  Résumés and cover letters are encouraged but will not be accepted in lieu of the application form. Postmarks will not be accepted.  Review Process:  Based on the information provided in the application documents, the best qualified applicants will be invited for further examination.  All applicants meeting the minimum qualifications are not guaranteed advancement through any subsequent phase of the examination.  Depending upon the number of applications received, the examination may consist of an application screening, written and/or practical exam, oral interview or any combination thereof.  If you have a disability that requires accommodation during the selection process, please notify Human Resources at least seven days prior to the event.

Virtual Panel interviews are tentatively scheduled for the week of May 20, 2024.

CURRENT SALARY

Utilities Maintenance Worker I
$3,846.76 - $4,909.54 /month
$1,775.43 - $2,265.94 /bi-weekly

Utilities Maintenance Worker II
$4,352.25 - $5,554.69 /month
$2,008.73 - $2,563.70 /bi-weekly

BENEFITS

Future Salary COLAs:         
4% increase (eff July 2024), 1% increase (eff January 2025), 4% increase (eff July 2025) and 1% increase (eff January 2026)

Retirement:                            
CalPERS Retirement System (2 % @ 60 formula for Classic CalPERS members and 2% @ 62 formula for new CalPERS members).  The City does not participate in social security

Deferred Compensation:                    
Choice of deferred compensation plans (Traditional and Roth) with 1% City-match effective July 2024.  After successful completion of probation, new hires are also eligible for a 2% City contribution.

Medical:                                 
CalPERS Medical Insurance Plans, including HMOs and PPOs.  City gives an allowance toward the cost of insurance.  Maximum Family Medical Allowance (2024): $2,463.99 per month

Dental/Vision:                         
City paid Delta Dental and VSP Vision Benefits

LTD/STD:                               
City paid wage protection for long/short term disabilities

Life Insurance:                       
City provides $50,000 life insurance policy

Supplemental Benefits:        
Voluntary Supplemental Life, Cancer, Accident Only, STD/LTD and Critical Illness insurance, and Flexible Spending Accounts available

Vacation:                                
6.7 hours per month during first three years of service

Holidays:                                
12.5 paid holidays (including two floating holidays)

Sick Leave:                            
8 hours per month

Bilingual Pay:                        
$200 per month upon certification

Certification Pay:                  
Additional pay for eligible certifications (up to a total of 4%)

Professional Growth Incentive:         
$625 per fiscal year for education or professional activities

The City of Woodland hires only U.S. citizens and individuals lawfully authorized to work in the U.S.
The City of Woodland is an Equal Opportunity Employer

Please visit this link to view the job posting:

https://www.governmentjobs.com/careers/marinwater/jobs/4461095/water-conservation-specialist-iii?pagetype=jobOpportunitiesJobs

Please visit this link to view the job posting:

https://www.governmentjobs.com/careers/marinwater/jobs/newprint/4452425

Please visit this link to view the job posting:

https://www.governmentjobs.com/careers/marinwater/jobs/4433772/water-quality-intern?pagetype=jobOpportunitiesJobs