Search Jobs

The City of Livermore is currently accepting applications for the position of Water Resources Mechanic I/II.  There are 2 vacancies can be filled at the I or II level. Apply online at www.LivermoreCA.gov!

WR MECHANIC I - $6,757.36 - $8,199.65 MONTHLY
WR MECHANIC II - $7,621.28 - $9,249.76 MONTHLY

Water Resources Mechanics perform a wide range of tasks involving mechanical maintenance and repairs of pumps, plumbing systems, electric motors, compressors, piping, boilers, underground infrastructure, facilities and buildings, carpentry, HVAC systems, mechanical drives, gear boxes, blowers, collectors, belt filter presses, and chemical feed systems. The work is done at the Water Reclamation Plant, located at 101 West Jack London Boulevard in Livermore.

A Water Resources Mechanic I performs a range of tasks requiring journey level mechanical ability and aptitude. Work assignments are performed according to established rules and procedures. Independent judgment is required and is supported at regular intervals by supervisory review and direction. A Water Resources Mechanic II is distinguished from the WR Mechanic I by the possession of advanced journey level mechanical ability and aptitude and is responsible for solving more difficult technical problems.

Located in Middletown, CA!

The Mechanic Operator position consists of five levels of competency.  Individuals can either enter into the classification at the beginning level of the job or somewhere between the entry level and the top step depending on the qualifications brought with them.  It is the expectation of NCPA that all employees progress to the top level.  In order to progress to the top level an employee must complete all components in a competency level within the associated training matrix.  Employees who successfully complete a training level matrix and who received a rating of “meets requirements” or higher by their immediate supervisor will be promoted when qualified.  Upon completion/demonstration of competencies employees will be expected to perform work in all completed levels and other job-related duties as required. All employees have the right to challenge any component in the training matrix by proving proficiencies verbally and practically.

General Scope of the Job
Under general supervision of the Mechanical Maintenance Supervisor and at times under the general direction of the Mechanic Operator Lead Person; to maintain, repair, adjust, install, and test, powerplant steam field, water injection systems and equipment and maintain lease site grounds.  The measure of accuracy and reliability is the safe, effective and efficient performance of the Facilities.  This position is predominately mechanic based with operation support as outlined below.

Description of Duties and Responsibilities
Level III:
This level of the Mechanic Operator position requires the completion of all Level III training requirements. The employee must perform the duties as described below and as defined in lower levels while attaining Level IV skills and experience through academic and hands-on training. Level III knowledge and skills focus on journey level mechanical duties and responsibilities.
•    Inspects, tests, calibrates, installs, rebuilds, adjusts, repairs and aligns all mechanical equipment such as hydraulic control systems, turbines, generators, cooling tower, pumps, electric motors, valves, gear reducers, compressors, blowers heat exchangers, HVAC systems excluding refrigerant replacement, fire protection systems, diesel and gas engines, mufflers, separators, traps, rock catchers, tanks, pipeline and pipe supports.
•    Maintains facility structures. 
•    Performs basic inspections and repairs various rigging equipment, fixtures and cranes.
•    Assists the scaffolding qualified journeyman in maintaining, and repairing scaffolding. 
•    Inspects and maintains safety devices such as harnesses and rescue equipment.
•    Works with Safety Manager to maintain records of regulated equipment.
•    Keeps accurate records of equipment history, reports and work orders on computer for CMMS.  Works with CMMS personnel for accuracy and reliability.
•    Performs preventative maintenance and assessments on various plant equipment.
•    Writes Work/Operating Procedures within area of expertise.
•    Requisitions replacement parts and supplies to carry out assigned tasks.
•    Makes working drawings of components and changes made to Plant systems relative to area of expertise.
•    Installs, inspects, tests, repairs, rebuilds, and maintains equipment such as portable and fixed site pumps, valves, mufflers, separators, traps, rock catchers, turbines, generators, motors, gear reducers, compressors and hydraulic control systems, pipelines, tanks, pipeline supports, effluent piping components.
•    Maintains lease site grounds structures, culverts, roads, drains and ditches.
•    Examines and diagnoses malfunctions or defective equipment on pumps, motors, valves, separators, vents, air vacuum breakers and compressors; disassembles/reassembles, overhauls and adjusts defective equipment
•    Installs, fits and calibrates equipment replacement parts.  Observes equipment operation.  Adjusts equipment to operational specifications using specialized tools and precision measuring instruments.
•    Disassembles, removes, repairs, replaces, assembles and aligns pipes, pipeline components, and valves repairing or replacing broken and worn parts using various hand tools.
•    Observes and directs contractors while digging trenches, cleaning tanks and maintaining lease site grounds.
•    Under the direction and training of operations, assists with clearances on steam field and effluent pipeline equipment for maintenance purposes.
•    Will be trained to Rig and lift equipment to install, repair or replace equipment.
•    Instructs and trains workers in repair and maintenance procedures of steam field, power plant and effluent pipeline equipment.
•    Maintains inventory of tools and materials for the maintenance work at the steam field and effluent pipeline.
•    Maintains steam field equipment records on work completed on CMMS or equivalent maintenance program.
•    Assists other classifications when needed.
•    Performs other job-related duties as required.
•    Acquire OSHA certified training to meet business needs.
•    Trains and advises other workers in the maintenance and operation of steam field and effluent pipeline equipment.
•    Maintains and repairs Hydraulic Control Systems.

Level IV:
This level of the Mechanic Operator position requires the completion of all Level IV training requirements for operational duties and responsibilities.  The employee must perform the duties as described below and as defined in lower levels while attaining Level V skills and experience through academic and hands-on training.
•    Reviews, coordinates and reports work orders, work activities and equipment clearances with appropriate personnel.  
•    Checks equipment to be cleared in advance to guarantee its condition to others.  Informs Operator Technician Lead Person and Supervisors of the status of equipment and systems.  
•    Under direction of the Operator Technician Lead Person or a designee, operates various equipment and performs basic equipment clearances on low voltages (<600 volt) electrical breakers, steam line equipment and effluent equipment.  
•    Terminates and connects motor wiring to facilitate bearing repairs (less than 600 volts.).
•    Conducts online test of equipment before certifying its status and performance.

Machinist Duties and Responsibilities
•     Sets up and operates machine tools to repair or reproduce equipment parts and fittings working from blueprints or defective parts using precision tools and measuring instruments.
•    Fabricates special tools, rigging equipment and replacement parts to repair equipment.   
•    Fabricates, modifies, shapes and repairs equipment parts using a variety of metal working machines.
•    Chips, grinds, bores, and drills equipment parts.
•    Verifies conformance of finished work piece to specifications, using precision measuring instruments.
•    Calibrates, fits and assembles equipment parts according to drawings and specifications using machine tools, power tools, and measuring instruments.
•    Installs machined replacement parts; starts and observes equipment operation to detect malfunctions or out-of-tolerance performance, adjusts as necessary.
•    Maintains shop equipment and tools.
•    Maintains inventory of machining tools.

Representative Physical and Job Demands
•    Regularly talks and listens to others to exchange and obtain information to direct the operation and maintenance of Geothermal Facility steam field and effluent equipment.
•    Regularly reaches, grasps, pushes and pulls various wrenches, hand tools, and other objects using manual dexterity and eye hand coordination to operate and maintain equipment.
•    Regularly climb ladders and walks on platforms near high temperature surfaces; works on slippery or uneven surfaces in precarious places.
•    Frequently walks, reaches, kneels and crouches using feet, legs, hands and manual strength to access and operate plant equipment.
•    Occasionally lifts and moves pumps motors and pipe weighing up to 50 pounds.
•    Routinely works near heated surfaces; works on slippery or uneven surfaces in precarious places to adjust or operate equipment.
•    Occasionally exposed to high voltage and other electrical hazards while working on equipment.
•    Routinely works in outside weather conditions and is exposed to chemicals, wet and humid conditions, extreme cold and heat while inspecting and maintaining equipment.  The noise level is frequently very loud.
•    Routinely listens to operating sounds of equipment to diagnosis equipment malfunctions.
•    Frequently operates forklifts cranes, air compressors, sandblasters and power tools to maintain and repair equipment.
•    Frequently operates Agency vehicles going to and from job locations.

Job Expectations
Acquisition and Use of Technical Knowledge
•    Possesses or acquires as needed the ability to detect, diagnose disassemble and repair steam and water equipment with a fundamental knowledge of; turbine equipment, and auxiliary systems and their capabilities; operation processes, mechanical and electrical theory and background to operate equipment; measuring devices and hand tools for maintenance work; general contamination and control practices and procedures; basic math, geothermal powerplant rules and regulations; clearance procedures, physics including pump mechanics; basic principles of thermodynamics and fluid flow.  Given this basic knowledge, understands own role within the plant and how that role requires the use of knowledge applied to practical, day to day, operations and maintenance demands.  Hold self-accountable to acquire knowledge that may be needed when a job situation changes, new tasks are introduced to the job, or when improved performance requires acquiring extended or specialized information.
•    Possesses or acquires as needed an extensive knowledge of safety, fire, and security rules and procedures.  Given the emphasis of safety at the plant, uses knowledge to improve plant conditions and the organization’s safety record.
•    Acquires knowledge of operations and maintenance procedures on a continuing basis to stay current as a significant contributor to plant solutions, safety performance, and operations and maintenance improvements.
•    Confers with Operator Technician Lead Person or Operations Supervisor to resolve system problems and offers a variety of workable solutions to complex problems and report status of systems and equipment.  
•    Identifies problems or trends with systems and equipment early to prevent operator or electrical errors. 
•    Passes knowledge on to other employees as a way to contribute to the performance of others, or get a job done.
•    Assesses own limitations with the fundamental knowledge needed to perform in the job.

Application of Technical and General Job Skills
Technical and job skills are indicated by demonstrating an ability to:
•    Efficiently and effectively operate, control, and maintain equipment, and be accountable for aspects of the job at the Geothermal Facility. 
•    Implement or use existing methods to control the waste of time, money and material resources, such as:
o    Acting to improve work procedures 
o    Conserving resources 
o    Expediting a job
o    Completing a work assignment efficiently
o    Completing long term work in an orderly fashion
•    Work with management to identify and learn from mistakes made and apply what is learned to future situations or plant conditions.
•    Establish and maintain effective work relationships with those contacted in the performance of required duties.
•    Review own action to determine the cause of poor working relationships so those relationships can be improved
•    May be required to work extended hours and on normal days off.
•    Operate Agency vehicles and equipment safely.

Training and Experience Requirements
Level III: Completion of the NCPA Level III training program or three years of equivalent journey-level mechanical experience.
Level IV: Completion of the NCPA Level IV training program or three years of equivalent journey-level mechanical experience and operations experience.

Driver’s License Requirement
Possession of an unrestricted Class C California operator’s license issued by the State of California, Department of Motor Vehicles.  Possession and maintenance of a good driving record as demonstrated by the absence of multiple or serious traffic violations or accidents within the last three (3) years.

Desired Qualifications 
•    Possession, or ability to obtain with training, a Class A California operator’s license issued by the State of California Department of motor Vehicles.
•    Ability to set up and operates machine tools to repair or reproduce equipment parts and fittings working from blueprints or defective parts using precision tools and measuring instruments.
•    Ability to Fabricate special tools, rigging equipment and replacement parts to repair equipment.   
•    Ability to Fabricate, modifies, shapes and repairs equipment parts using a variety of metal working machines.
•    Chips, grinds, bores, and drills equipment parts.
•    Verifies conformance of finished work piece to specifications, using precision measuring instruments.
•    Calibrates, fits and assembles equipment parts according to drawings and specifications using machine tools, power tools, and measuring instruments.
•    Installs machined replacement parts; starts and observes equipment operation to detect malfunctions or out-of-tolerance performance, adjusts as necessary.

EOE

The Application Programmer performs or assists in the design, documentation, coding, testing, and implementation of new application programs or enhancements to existing application programs consistent with the Software Development Life Cycle (SDLC) best practices and applicable computer programming standards and frameworks. The position is primarily responsible for the suite of Bid-to-Bill applications as well as other business applications in use by the Agency. The position will work with other developer staff and supervisor during probationary status to learn and develop proficiency in the use of the Agency's software development frameworks, processes, and documentation design standards.

ESSENTIAL DUTIES AND RESPONSIBILITIES
This position requires that the incumbent reports for work on time and maintains satisfactory attendance in accordance with Agency policy; Ensures work responsibilities are covered when absent; Arrives to meetings and appointments on time; Performs special assignments as assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Level I: 
This classification is an entry-level position that is not expected to perform with the same level of independence of direction and judgment as higher levels. The level I works closely with other senior-level CTAs and is often given direction to complete tasks, install and troubleshoot hardware and software, perform system upgrades, evaluate and apply patches to systems, work closely with customers, and provide application support through help desk requests, and creates and maintains documentation.

Level II: 
This classification requires having all Level I duties and responsibilities with a minimum of two years of experience in software application development. Level II receives occasional direction and guidance from other senior-level CTAs; otherwise, uses developed experience and professional judgment to successfully complete projects in accordance with defined requirements and established timelines.

Responsibilities:
•    Within a specific hardware and operating system environment, work to define and design the operating features of new programs or enhancements
•    Produce appropriate conceptual-level application documentation for review and approval by the supervisor
•    Produce appropriate programming documentation for the review of the Supervisor, with sufficient detail on which to base programming activities
•    Develop computer programs in accordance with design documentation, closely following coding standards and conventions used within NCPA
•    Test applications using prescribed test methodology and tools
•    Develop an implementation plan, prepare production rollout for approval by the supervisor, and coordinate with the Ops team to execute the rollout
•    Maintain and enhance software applications
•    Conduct independent communications with user departments in a cooperative and professional manner
•    Provide emergency system support outside normal working hours as needed, on a rotational basis with other department employees
•    Travel to NCPA remote field sites to provide support to remote users as needed 
•    Assist in the evaluation of proposed new or modified computer system hardware and software

MINIMUM QUALIFICATIONS

Level I:
Education and/or Experience      
Bachelor's degree in Computer Science, Management Information Systems, Computer Engineering, or related field from an accredited four-year college or university and at least six months of related programming experience and training.

Level II:
Education and/or Experience      
Bachelor’s degree in Computer Science, Management Information Systems, Computer Engineering or related field from an accredited four-year college or university and at least two years of related programming experience and training. A minimum of two years in design and programming experience including some experience programming interactive programs. Experience must include exposure to systems analysis techniques.

KNOWLEDGE AND ABILITIES 
Knowledge:
Knowledge of VB.Net and/or C# as core programming language is essential; Integrated development environment (IDE) such as Microsoft Visual Studio; Source control management tools such as Team Foundation Server (TFS) and Git; JavaScript, HTML5, and Cascading Style Sheets (CSS) for developing web pages is highly desired; Oracle PL/SQL, SQL-Server T-SQL or similar SQL experience and understanding of relational database principles. Knowledge of software testing methodologies and tools, computer equipment and capabilities, data communications and local area networking, and client-server software is essential; Principles and programming techniques used to implement online interactive applications, technical report writing, systems analysis techniques, database management concepts, and management information system concepts; DevOps and related best practices; and knowledge of the Component-based Scalable Logical Architecture (CSLA) is an advantage.

Abilities:
Ability to write moderately complex programs and develop detailed program specifications; Demonstrate an understanding of MVC (Model-View-Controller; Stay up to date with related software development technologies through training, product research, and participating in conferences and user groups. Ability to work effectively with a broad, diverse cross-section of peers and various individual personalities; listen effectively, communicate with, and maintain a professional working relationship with co-workers; communicate clearly, efficiently, and professionally both over the phone and in person; Maintain strong organizational skills; and the ability to complete quality and timely work with minimal supervision.

SPECIAL REQUIREMENTS

Valid California Driver's License and insurance. 

This job has no supervisory responsibilities.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this Job, the employee is regularly required to sit and view and operate a computer, use hands to finger, handle, or feel, reach with hands and arms, and talk or hear. Requires manual finger dexterity and eye-hand coordination to operate and adjust office equipment such as computers. The employee is occasionally required to stand and walk. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, color vision, and the ability to adjust focus.

The noise level in the work environment is usually quiet.

All employees are responsible for contributing to an inclusive, safe, and secure work environment that values diverse cultures, perspectives, and experiences and is free from discrimination.

Glenn County is recruiting individuals to fill three full time and multiple Part Time/ Extra Help positions in the Public Works Agency. The Public Works Maintenance Worker I/II/III position performs a variety of semi-skilled and skilled labor in the construction, maintenance and repair of County roads, bridges, and other related structures, and in various traffic control maintenance and  repair activities of the Public Works Agency; operates a variety of construction, maintenance and transportation equipment as necessary to complete daily tasks at the Glenn County Public Works Agency. The Public Works Maintenance Worker III position is the journey-level class in the series, and is distinguished from the Public Works Maintenance Worker II by the primary responsibility to operate heavy diesel and gasoline-powered construction equipment in the maintenance of roadways, drainage systems. 
 

WHAT YOU’LL DO

• Prepares roads for patch repairs, overlays, or chip seals; prepares mix for patching roads; repairs and reconstructs roads.
• Cleans roadsides and drainage systems; inspects and clears debris from drainage systems; conducts roadside burning as needed.
• Prunes trees and other vegetation as needed.
• Directs and controls traffic around work sites.
• Operates semi-trucks, dump trucks, water trucks, boom truck, front loader, rollers, snow plow, etc.; operates a compressor, sand blasters, jack hammer, chipper machine, welding equipment, cutting torch, compaction tools, weed eater, blower, and other hand and power tools.

I-   $18.29 - $22.24 Per Hour
II-  $19.70 - $23.94 Per Hour
III- $20.72 - $25.19 Per Hour

Final Filing Date:  First review of applications will be on June 7, 2024. NCPA reserves the right to close this posting once a sufficient number of applications have been received.
 

Under the direction of the IS Operations & Support Assistant Manager, the Database Administrator architects, tests, implements, maintains, and documents Agency databases. The database administrator collaborates closely with IS development and Agency operations personnel to provide backend database solutions for custom applications, including real-time, scheduling, and settlement programs. The database administrator troubleshoots and provides solutions for database problems.

Level III
This classification supports and maintains the Agency’s database infrastructure and related applications. Administers all database objects, including but not limited to schemas, tables, clusters, indexes, and views. Performs database re-organizations as needed to improve performance. Performs impact analysis of changes to be made to database objects before implementing significant schema changes. Ensures security for all databases by creating roles and associated privileges. Controls and monitors user access to databases. This is a journey-level position and is given minimal direction in job duties and responsibilities.  

Level IV
Architects and designs the Agency’s database infrastructure and ensures the highest levels of availability. Leads database projects to establish new database architectures. Oversees upgrades and implementations of new databases or related software.   Position can perform all lower level requirements and works independently with very little direction May be called upon to provide reports or present to the Agency’s Information Technology Committee. May direct the work of lower classifications.     

ESSENTIAL DUTIES AND RESPONSIBILITIES
This position requires that the incumbent reports for work on time and maintains satisfactory attendance in accordance with Agency policy; Ensures work responsibilities are covered when absent; Arrives to meetings and appointments on time; Performs special assignments for the Assistant Manager, Information Services or others as assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Responsibilities:
Design, create and maintain all Oracle databases required for development, testing, and production usage. 

Install, configure, upgrade, and troubleshoot Database server software for both stand-alone instances and Real Application Clusters (RAC). Includes patching both Oracle and Windows. 

Administer all database objects, including schemas, tables, clusters, indexes, views, sequences, constraints, packages, and procedures. This includes creating primary database storage structures (tablespaces) and primary objects (tables, views, indexes). Manage the sharing of resources between applications. 

Troubleshoot problems regarding the databases, servers, applications and development tools. Open technical support cases with support as needed and serve as primary support contact for NCPA. 

Perform capacity planning for all databases. Work closely with IS storage and system administration staff to plan and allocate database system storage. 

Experienced with creating, managing, and maintaining data warehouse technologies.

Perform ongoing monitoring and tuning of all database instances and Windows servers to optimize database performance and reliability. 

Plan and implement backup and recovery of Agency databases. Maintain remote standby databases using archive logs.

Implement and enforce security for all of the Databases through creating and maintaining users and roles, and assigning privileges. Control and monitor user access to the database. 

Perform database re-organizations as required to improve performance and ensure maximum uptime of the database. Modify the database structure from information given by application developers. Gather statistics, create indexes, create or expand tablespaces as needed. 

Perform SQL and PL/SQL tuning and performance monitoring. 

Set up and maintain documentation and standards for database practices and procedures. 

Provide technical support to application developers and database users. 

Perform impact analysis of changes to be made to database objects. Approve and implement/oversee significant schema changes and changes to database design. 

Provide support during non-standard hours (on an as-needed basis, on-call 24x7x365). 

Provide a strategic database direction for the organization.

MINIMUM QUALIFICATIONS

Level III:
Education and/or Experience
A bachelor’s degree from an accredited four-year college or university in Computer Science, Management Information Systems, Engineering, or a related field and five or more years of related experience and/or training, or an equivalent combination of education and experience.

Level IV: 
Education and/or Experience 
A bachelor’s degree from an accredited four-year college or university in Computer Science, Management Information Systems, Engineering, or a related field and eight or more years of related experience and/or training, or an equivalent combination of education and experience.

KNOWLEDGE AND ABILITIES 

Knowledge:
Knowledge of Oracle database; Oracle Recovery Manager (RMAN), Real Application Clusters (RAC); Oracle Automatic Storage Management (ASM), SQL, PL/SQL; Microsoft SQL Server; Windows; networking; virtual machines; batch/cmd scripting; PowerShell, SQL*Plus; Toad, GIT; physical database design; relational database theory; disaster recovery; back-up and recovery, relational database theory; Windows and Linux system administration; the Oracle optimizer and execution plans; troubleshooting and debugging, networking (TCP/IP), database security.

Abilities:
Ability to write complex programs and develop detailed program specifications; Ability to analyze data and situations, reason logically and creatively, identify problems, draw valid conclusions, and develop effective solutions; Ability to apply creative thinking in the design and development of methods of processing data with electronic computers; Ability to establish and maintain cooperative working relationships with those contacted in the course of the work; Ability to communicate effectively verbally and in writing, and prepare effective reports.

SPECIAL REQUIREMENTS

Valid California Driver's License and insurance as occasional travel may be required. 
While performing the duties of this job, the employee is regularly required to sit. The employee is occasionally required to stand and walk. Occasionally, the employee may be required to perform simple grasping and fine manipulation, use telephone, write or use a keyboard to communicate, crouch, crawl, reach and lift equipment up to 40 lbs. 

Level III: This job has no supervisory responsibilities. 

Level IV: This job may have supervisory responsibilities.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The noise level in the work environment is usually moderate.

All employees are responsible for contributing to an inclusive, safe, and secure work environment that values diverse cultures, perspectives, and experiences and is free from discrimination.
 

MAINTENANCE WORKER (Full time)

The City of Marysville seeks qualified candidates for this excellent career opportunity!

Working in the Public Works Department, the Maintenance Worker I/II will perform a variety of unskilled, semiskilled and skilled light and heavy duty construction, maintenance and repair work involving public works, sewer and drainage systems, buildings, parking meters, and other facilities.

The position will be filled as a Maintenance Worker I/II based on the experience and qualifications of the candidate.

SALARY RANGE:
Maintenance Worker I/II – $3,350.50 to $4,485.52 per month (wages effective 7/1/2024 per MOU).  
 

FINAL FILING DATE:
A complete application packet must be completed online by 11:59 pm, Monday, June 24, 2024.

DISTINGUISHING CHARACTERISTICS:

Maintenance Worker I:  This is the entry level class in the maintenance worker series. Positions in this class normally perform a variety of unskilled and semi‑skilled maintenance tasks. Although trucks and other motorized equipment may be operated by a Maintenance Worker I, the equipment is used on a training basis or for tasks which are repetitious in nature. Under this training concept, positions assigned to the class of Maintenance Worker II which become vacant may reasonably be filled at the Maintenance Worker I level, with the understanding that reassignment to the Maintenance Worker II class may be expected following successful job performance and personal development.

Maintenance Worker II: This is the journey level in the maintenance worker series. Positions assigned to this class are expected to perform semi‑skilled and skilled public works maintenance activities and to operate light and moderately heavy power‑driven equipment on a continuing basis. All positions allocated to this class require that an incumbent be able to work independently, exercising judgment and initiative to fulfill assigned tasks. Maintenance Workers II may also be expected to assist in the supervision and training of less experienced personnel.

EXAMPLES OF ESSENTIAL DUTIES

Examples of Work are not intended to be an exhaustive list of all responsibilities, duties and skills. They are intended to be accurate summaries of what the job classification involves and what is required to perform it. Employees are responsible for all other duties as assigned.

• Perform a variety of maintenance work in the construction, maintenance and repair of streets, parks, sewers, storm drains, curbs, gutters, sidewalks, parking meters and other public facilities.
• Operate power‑driven equipment such as skip loaders, dump trucks, water trucks and fork lifts.
• Break out old concrete work such as curbs, sidewalks, and gutters.
• Cut and prepare streets for patches, spread premix and oil, and rake asphalt.
• Replace, repair, couple, test, and backfill sewer lines.
• Clean and maintain basic tools used on the job.
• Paint traffic directional markings, such as crosswalks and safety loading zones.
• Fabricate, install, repair and replace street signs.
• Operate heavy power‑driven equipment on a relief or training basis.
• Water, mow, weed, trim, renovate, and fertilize grass and other landscaped areas.
• Rake leaves, clean walks, fields, courts, and other facilities.
• Spade and otherwise prepare ground around plants and shrubs, including mixing and applying fertilizers.
• Plant, trim and/or remove trees, flowers, and shrubs. 
• Load trimmings on trucks for disposal.
• Pick up rubbish and litter materials and perform general grounds cleaning.
• Operate power mowers, edgers, sewer rodders, and other hand-operated and power tools in the performance of maintenance and repair activities.
• Drive vehicles as required and assist in routine care and upkeep of such vehicles.
• Assist in moving and installing park and recreational equipment.
• Install, maintain, and repair sewer system mains, sprinkler systems, pipes and facilities.
• Inspect, maintain, and repair parking meter devices.

QUALIFICATION REQUIREMENTS

To be successful in these positions, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skills, and/or abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

EMPLOYMENT STANDARDS (position requirements at entry and throughout employment)

Any combination of education, training, and experience which provides the required knowledge, skills, and abilities to perform the job is qualifying. These employment standards would typically be achieved by possession of a high school diploma, or equivalent, and:

Maintenance Worker I: Possession of a valid California Class C driver license.  There is an employee weight limitation of 325 pounds to meet the legal limits for the safe use of certain equipment.

Maintenance Worker II: One year full-time performing the duties and activities expected of incumbents in the Maintenance Worker I classification. Possession of a valid California Class C driver license.  There is an employee weight limitation of 325 pounds to meet the legal limits for the safe use of certain equipment.

PHYSICAL DEMANDS

The physical demands described here are representative of those which must be met by an employee to successfully perform the essential functions of this job. Reasonable accom­modations may be made to enable individuals with disabilities to perform the essential functions.

While performing the duties of this job, the employee is regularly required to sit, walk, stand, stoop, climb, dig, lift up to 50 pounds and push motorized equipment.

Specific vision abilities required by this job include close vision and the ability to adjust focus.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing essential functions of this job. Reasonable accom­modations may be made to enable individuals with disabilities to perform the essential functions.

The noise level in the work environment is usually moderately quiet indoors, and varying outdoors.

Work is performed in all sorts of weather, including inclement weather and temperatures above 100 degrees Fahrenheit.

The City of Woodland offers a competitive total compensation package including:
 

• Starting income ranging from $3,846.76 to $5,554.69 per month based on skills, training, certifications and years of experience, with regular, incremental pay increases
• Robust Retirement Program including CalPERS Retirement Plan, Retirement Health Savings Plan, choice of 457 Deferred Comp plans with a 2% City-Paid contribution
• Low-Cost & No-Cost Health Benefits, including choice of CalPERS Medical plans, and City-paid Dental Insurance, Vision insurance and Employee Assistance Program
• Paid Career Development, including City-paid Professional Growth Incentive, City-provided training & professional advancement opportunities
• Home-Life Balance, inclusive work environment and predictable work schedule, as well as paid holiday, vacation, and sick leaves

To perform a variety of semi-skilled and skilled tasks in the construction, maintenance, and repair of water lines, sewers, storm drains, and pump stations.  The purpose of this recruitment is to fill multiple vacancies in the Sanitary Sewer/Storm Drainage Systems Division, as well as establish an eligibility list for future vacancies.  Initial position and salary of the selected candidate will be based on previous work experience and valid licenses/certificates. 

IDEAL CANDIDATE

The City of Woodland is looking to fill multiple Utilities Maintenance Worker I/II positions in the Public Works Sanitary Sewer/Storm Drainage Systems Division.  The Ideal Candidate for the current vacancy is someone who has a good understanding of all aspects of underground sewer/storm drain maintenance and repairs, and is familiar with the operation of light and heavy equipment.  This position requires a “team player” with good interpersonal, time management, and communication skills.  Candidate must be able to follow direction and display good judgment, as well as be organized, flexible, approachable, resourceful, and a positive team contributor.  Current and valid distribution certifications and Class A/B commercial driver’s license are highly desirable.

Utilities Maintenance Worker I:

This is the entry level class in the Utilities Maintenance Worker series.  The Utilities Maintenance Worker I may often perform many of the duties required of Utilities Maintenance Workers II but is not expected to have the depth of experience, skill level and certifications of the Utilities Maintenance Worker II. As a result, the Utilities Maintenance Worker I will have fewer opportunities to exercise independent discretion and judgment on matters related to work procedures and methods.

Utilities Maintenance Worker II:

This is the Journey level in the Utilities Maintenance Worker series. This class differs from Utilities Maintenance Worker I in that incumbent perform more complex maintenance duties including working independently, exercising judgment, and operating the full range of tools and mechanical equipment related to a specific assignment.  The Utilities Maintenance Worker II may also be expected to assist in the oversight and training of less experienced personnel. Positions in this class are flexibly staffed and are normally filled by advancement from the I level, or by candidates with prior work experience elsewhere.

ESSENTIAL JOB FUNCTIONS 

Operate a variety of light and moderately heavy construction and maintenance equipment including such pieces as a loader, dump truck, water truck, steel rollers, High Velocity Vacuum Cleaner, mole trencher, and rubber-tired tractor with all attachments in order to perform a variety of routine construction and maintenance operations.  Operate fork lift as assigned and trained.  Perform general maintenance and repair on water distribution and/or storm and wastewater collection facilities including installation, testing, and backfill of service laterals.  Within the sewer and stormwater collections division, employees will be expected to use the Closed-Circuit Television Truck, sewer cable machine, flush sewer laterals and mains, assist in sewer tap installations, clean storm drain lines and catch basins. Within the water distribution division, employees will be expected to assist in water tap installations, install, remove, and repair water meters, hydrants, service valves, and mainline valves; take water meter and gauge readings; accurately maintain records and reports.  All Utilities Maintenance Worker I/II will operate equipment and vehicles with possession of all necessary licenses and certificates, utilize proper safety precautions related to all performed work and comply with the policies and procedures in the department Injury & Illness Prevention Program (IIPP). Regular, predictable, consistent and timely attendance is an essential function of the position, in that employee must be present to work on facilities and equipment impacting the public’s health and safety.

OTHER JOB FUNCTIONS 

Respond to inquiries from the general public. Prepare as built sketches, when required to convey information to engineering for graphic documentation. Check water meters for proper operation; troubleshoot registers and repair. Initiate and discontinue water service to customer accounts as directed. Operate telemetering and flow monitoring equipment. Work cooperatively with others. Perform related duties as assigned. Both Assignments will require employees to be “On Call” as needed.

QUALIFICATIONS

Utilities Maintenance Worker I

Education: High School Diploma or equivalent.  Courses in, or graduation from, the American Public Works Association’s Public Works Institute is desirable

Experience:  One (1) year of experience in construction or related field.

License and Certificate:  Requires possession of a California State Drinking Water Operator Certification Program (DWOCP) Grade I Water Distribution Operator (D1) and a Grade I Wastewater Collections System Maintenance certificate issued by California Water Environment Association prior to permanent appointment. 

A Pipeline Assessment and Certification Program certificate issued by the National Association of Sewer System Companies (NASSCO) is desirable.

Requires possession of a valid California Driver's License.  A Class B Driver’s permit and DMV Medical Certification are required within three (3) months of hire.  Employee must obtain a valid Class B Driver's License, a Work Zone Safety certification issued by the International Municipal Signal Association, First Aid and CPR certifications, Competent Person certification, and Confined Space certification prior to permanent appointment.

Utilities Maintenance Worker II

Education:  High School Diploma or equivalent.  Courses in or graduation from the American Public Works Association’s Public Works Institute is desirable

Experience:  One (1) year of experience performing duties comparable to those of a Utilities Maintenance Worker I.

License and Certificate:  Requires possession of a California State (DWOCP) Grade I Water Distribution Operator (D1) and a Grade II Wastewater Collections System Maintenance certificate issued by California Water Environment Association upon hire.

Requires all of the certifications necessary for a Utilities Maintenance Worker I and possession of a valid Class B California Driver's License with Tank and Air Brake Endorsement upon hire.

APPLICATION

Apply with a City of Woodland application by visiting www.cityofwoodland.org/employment or the Human Resources Office, City Hall, 300 First Street, 2nd Floor, Woodland, CA 95695.   Recruitment is Open Until Filled.  First review of applications is scheduled for Friday, May 10, 2024.  Résumés and cover letters are encouraged but will not be accepted in lieu of the application form. Postmarks will not be accepted.  Review Process:  Based on the information provided in the application documents, the best qualified applicants will be invited for further examination.  All applicants meeting the minimum qualifications are not guaranteed advancement through any subsequent phase of the examination.  Depending upon the number of applications received, the examination may consist of an application screening, written and/or practical exam, oral interview or any combination thereof.  If you have a disability that requires accommodation during the selection process, please notify Human Resources at least seven days prior to the event.

Virtual Panel interviews are tentatively scheduled for the week of May 20, 2024.

CURRENT SALARY

Utilities Maintenance Worker I
$3,846.76 - $4,909.54 /month
$1,775.43 - $2,265.94 /bi-weekly

Utilities Maintenance Worker II
$4,352.25 - $5,554.69 /month
$2,008.73 - $2,563.70 /bi-weekly

BENEFITS

Future Salary COLAs:         
4% increase (eff July 2024), 1% increase (eff January 2025), 4% increase (eff July 2025) and 1% increase (eff January 2026)

Retirement:                            
CalPERS Retirement System (2 % @ 60 formula for Classic CalPERS members and 2% @ 62 formula for new CalPERS members).  The City does not participate in social security

Deferred Compensation:                    
Choice of deferred compensation plans (Traditional and Roth) with 1% City-match effective July 2024.  After successful completion of probation, new hires are also eligible for a 2% City contribution.

Medical:                                 
CalPERS Medical Insurance Plans, including HMOs and PPOs.  City gives an allowance toward the cost of insurance.  Maximum Family Medical Allowance (2024): $2,463.99 per month

Dental/Vision:                         
City paid Delta Dental and VSP Vision Benefits

LTD/STD:                               
City paid wage protection for long/short term disabilities

Life Insurance:                       
City provides $50,000 life insurance policy

Supplemental Benefits:        
Voluntary Supplemental Life, Cancer, Accident Only, STD/LTD and Critical Illness insurance, and Flexible Spending Accounts available

Vacation:                                
6.7 hours per month during first three years of service

Holidays:                                
12.5 paid holidays (including two floating holidays)

Sick Leave:                            
8 hours per month

Bilingual Pay:                        
$200 per month upon certification

Certification Pay:                  
Additional pay for eligible certifications (up to a total of 4%)

Professional Growth Incentive:         
$625 per fiscal year for education or professional activities

The City of Woodland hires only U.S. citizens and individuals lawfully authorized to work in the U.S.
The City of Woodland is an Equal Opportunity Employer

Th City of Vacaville invites applications for the position of Associate Civil Engineer within our Utilities Department. Currently, one (1) Associate Utilities Civil Engineer vacancy exists in the department. This recruitment will also serve to established an eligibility list to fill additional vacancies that may occur over the next 12 months. 

TO VIEW JOB ANNOUNCEMENT, CLICK JOB PDF OR JOB ANNOUNCEMENT URL BELOW.

The position is responsible for the performance of both the day-to-day power settlements among NCPA members, Western, California, and Federal electricity markets, local balancing authority area operators (CAISO, BANC, EIM), as well as settlement activities associated with NCPA Power Management’s Service Customers. Other responsibilities include tracking and meter data management validation duties, GHG (Greenhouse Gas) monitoring and analysis, analysis and testing associated with new CAISO market initiatives, and comprehensive analytic or technical studies, as required, including proceedings before state and federal regulatory agencies and public officials. This is a full journey-level position capable of performing all the duties and responsibilities of the Settlements Analyst I. Performs the full range of duties as assigned, receiving only occasional instruction, training, or assistance as new or unusual situations arise. Additionally, incumbents perform a variety of assigned complex technical and professional work in the areas of power accounts settlements, budgeting, systems development, and audit. Incumbents also provide technical analysis and assistance to staff, Members, contractual participants, and others, as required.

ESSENTIAL DUTIES AND RESPONSIBILITIES
This position requires that the incumbent report for work on time and maintain satisfactory attendance in accordance with Agency policy; Ensures work responsibilities are covered when absent; Arrives to meetings and appointments on time; Performs special assignments as assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions.

Responsibilities:
Provides technical advice, functional instruction, and guidance to less experienced Power Settlement staff as needed. Trains new Power Settlements Analysts and cross trains as roles evolve. Recommends personnel actions. Prepares and presents training/tutorials on All Resources Bill, Pre-Bill process, Power Settlement processes overall, and various other topics, as needed, in person or via webinars (s) to NCPA Members and Project Participant staff.

Serves as subject matter expert, working with Information Services, on Power Settlements application requirements, such as All Resources Bill enhancements, and testing system enhancements in development.

Implements and operates complicated power settlements systems. Prepares complex analytical reports and supporting documentation.

Provides analysis, integration, and implementation of new energy market initiatives and/or customers/Scheduling Coordination accounts (e.g., ISO, Western Energy Imbalance Market (“EIM”), renewable generating resources, Community Choice Energy/Aggregators (“CCE”).

Monitors settlements associated with Renewable Energy Credits and acts as or provides support to NCPA’s Qualified Reporting Entity representative; registers credits on the Western Renewable Energy Generation Information System (“WREGIS”) or its successor.

Monitors settlements functions of Western capacity and energy allocations, market purchases and sales, Pool transmission activity, and other transactions as they occur; Prepares or reviews power settlement transactions for proper budget classification.

Conducts special studies requiring complex, voluminous, and detailed analysis of power costs and revenues. Recommends operational changes that provide better value to Members and Participants.

Coordinates and participates in the development, analysis, and monitoring of the Agency's power supply budgets. Acts as power settlements representative to other department managers and supervisors in regard to cost summary and budgetary reports.

Assists with the implementation of systems, policies, and procedures and special projects requiring highly technical study and analyses. Recommends changes or modifications to methods or systems as applicable.

Assists with formal budget and other presentations to upper management and the governing body.
Performs special assignments for the Power Settlements Supervisor or others as assigned, including preparation of testimony and exhibits for presentation before state and national regulatory proceedings.

MINIMUM QUALIFICATIONS

Education and/or Experience
Bachelor's degree (B. A.) from a four-year college or university with an emphasis on quantitative analysis, plus four (4) years of prior experience as a Power Settlements Analyst I or an equivalent combination of education and experience.

KNOWLEDGE AND ABILITIES 
Knowledge:
Knowledge of California Independent System Operator settlements procedures for tariff services and Metered Subsystem services; NCPA settlements procedures for scheduling coordinator services and the ten-member power pool; California Energy Imbalance Markets; NCPA’s Western (WAPA) contracts
California’s Green House Gas rules; CARB renewable energy credits; Knowledge of NCPA settlements procedures for scheduling coordinator services and the ten-member power pool.

Abilities:
Ability to retrieve detailed records and summary-level data from NCPA’s Oracle database systems through the use of Structured Query Language (“SQL”) statements in proprietary software (e.g., SAS, Toad, SQL Developer, Oracle Database Connection [“ODBC”]) and process through proprietary or open-source software programming applications (e.g., SAS, Visual Basic for Applications [“VBA”], R, Python, Excel workbooks); Ability to read, analyze, and interpret CAISO tariff, NCPA operating agreements, and contracts, standard industry power purchase agreements, technical procedures, and governmental regulations; Ability to write reports, business correspondence, and procedure manuals; Ability to present information effectively and respond to questions from groups of managers, clients, customers, and the general public; and the Ability to analyze and interpret settlement formulas expressed in summation notation.

SPECIAL REQUIREMENTS

Valid California Driver's License and insurance. 

This job has no supervisory responsibilities.

WORK ENVIRONMENT

The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is frequently required to stand; sit; use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee is occasionally required to walk; climb or balance; stoop, kneel, crouch, or crawl, and taste or smell. The employee must occasionally lift and/or move up to 10 pounds. Specific vision abilities required by this job include close vision, distance vision, depth perception, and the ability to adjust focus.

The noise level in the work environment is usually moderate.

All employees are responsible for contributing to an inclusive, safe, and secure work environment that values diverse cultures, perspectives, and experiences and is free from discrimination.
 

Project Manager I (Utility Location and Marking)

SALARY:
$4,300.96 - $5,137.19 Biweekly
$9,318.75 - $11,130.58 Monthly
$111,825.00 - $133,567.00 Annually

AC Transit is seeking a Project Manager I (Utility Location and Marking) in the Capital Projects department. Under general direction, serves as project manager for routine to moderately complex projects and assists higher-level project managers on more complex projects as needed. This is the experienced level within the Project Manager series. There are four (4) levels within the series, which are distinguished from one another by the technical complexity of the assigned duties and the level of discretion and independent judgment exercised. Positions at this level are responsible for performing project management activities for routine to moderately complex projects.

Positions in the Project Manager series are flexibly staffed to meet the needs of the District. Positions at the experienced level are normally filled by advancement from the entry-level and promotion is subject to the following: (i) management affirmation that the incumbent is performing the full range of duties assigned and (ii) after gaining requisite experience and demonstrating proficiency that meets the minimum qualifications of the next higher-level classification.

This classification is differentiated from the Project Manager II in that the latter is a lead-level classification responsible for organizing, assigning, and reviewing the work of departmental and/or contract staff, and is further differentiated by the scope, complexity, and sensitivity of the assigned projects.
This is an excellent opportunity to work for the largest bus agency in California. In addition to working with some of the best in the business, AC Transit also has an excellent benefits package that includes pension, medical, dental and vision coverage, flexible spending and a 457 savings plan.

REPRESENTATIVE FUNCTIONS:
Performs project management functions and activities and is responsible for the full lifecycle of an assigned project overseeing scope, timeline, budget, and quality standards from the project’s inception to completion.
Develops project timeline, schedule, and milestones, detailing the nature and level of staffing/labor/contracted services needed to meet the proposed timeline; monitors project progress and confers with stakeholders on matters that may impact timeline expectations and deliverables.Develops project budget, detailing labor and materials costs; reviews invoices for accuracy and to affirm services/equipment have been delivered in accordance with project requirements; tracks project expenses; recommends payment of invoices; conducts regular and periodic reviews to discuss expense alignment with budget, anticipated adjustments, or significant variances from budget.

Develops and monitors standards of quality and ensures that standards of quality are met and are delivered in conformity with contractual obligations; manages changes in project scope; identifies and provides timely communication of potential crises and/or deviations from project timeline, budget or quality standards; proposes and evaluates solutions; devises and implements contingency plans.

Evaluates and recommends professional consulting services for assigned projects; develops and disseminates Requests for Proposals (RFPs), Request for Qualifications (RFQs) and Invitation For Bids (IFBs) and develops proposal evaluation criteria; assists in the negotiation, preparation and administration of professional services and contracts; recommends and prepares amendments to professional services contracts.

Prepares, reviews, and maintains a variety of project-related information and documentation, including project schedules, Statements of Work (SOWs), status reports, detailing issues, risks, and deliverables; monitors agreements and projects for compliance with relevant codes, ordinances, rules, and regulations.
Reviews and recommends the approval of project proposals; coordinates design and planning services for assigned projects; and reviews design concepts for compliance with development plans.
Coordinates with grants management, grants accounting, Accounts Payable, and Accounts Receivable to resolve issues.

Prepares project staff reports for Board presentations; presents oral and written presentations to a variety of stakeholders that may include external boards and commissions, advisory committees, and citizen groups.

Attends and participates in professional group meetings and committees; stays abreast of new trends and innovations in the field of project management and federal, state, and local regulations related to the area of assignment.

Performs utility marking of the District's Fiber Optic Cable located in the public right-of-way using industry standard locating equipment and as-built drawings based on notifications from 811/USA Alert or City Building Departments.

Performs utility marking of all utilities located on District property using industry standard locating equipment and as-built drawings based on requests from District's Project Managers.
Maintain and upgrade as appropriate existing utility location documentation.
Performs related duties as required.

MINIMUM QUALIFICATIONS:
Education: Equivalent to a Bachelor’s degree from an accredited four-year college or university in a field directly related to the area to which assigned. For Engineering/Capital Projects: Equivalent to a Bachelor’s degree in architecture, engineering, planning, or a related field.

Experience: Four (4) years of experience in the professional field required by the assigned special projects or two (2) years that involved responsibilities at a level equivalent to the District's classification of Project Coordinator. Years of experience may be substituted for the educational requirement on a two for one basis; two (2) years of experience may be submitted for one (1) year of education).

Highly Desirable: 

• Ability to read and understand as-built plans, including construction plans
• Ability to observe construction work performed by others that impacts District's utilities to ensure any site restoration is done to code.
• Must understand the 811 / USA Alert system and program, how it works, how to monitor for projects that may impact our District assets.
• Must know the color codes used to mark utilities.
• Interpersonal skills to coordinate with contractor who are permitted to excavate in/around District assets and with City inspectors to enforce quality standards on subject contractors. Ability to use locator equipment, materials, and hand tools to perform marking tasks. Ability to write reports documenting marking tasks performed.
• Must be proactive and a self-starter. Utility marking requires the individual to stay ahead of the contractors.
• Must be willing to work in inclement weather.

ADDITIONAL INFORMATION:
Physical Requirements: Must maintain the physical condition necessary to perform tasks in an office setting operating a computer, keyboard, and other peripheral equipment; safely drive a District automobile; and walk, stand, and climb short distances in construction settings in order to inspect the progress of assigned projects.

Special Environmental Conditions: None.

THIS POSITION IS AN UNREPRESENTED AT WILL POSITION

The Selection Process: The Human Resources department must receive a completed online application by the filling date. If this recruitment is "Continuous," it may be closed at any time without notice. Applications will be screened for job related qualifications, and those candidates who best meeting the qualifications listed on this Job Announcement will be invited to participate in an examination process that may include written, oral and/or performance segments. Current District employees must have satisfactory attendance and performance records. Finalists will be placed on an Eligibility List. When filling vacancies, the Human Resources Department will refer the top candidates to the hiring department for final screening and recommendation.

Vaccination Requirement for Candidates Seeking Employment: Alameda-Contra Costa Transit District has implemented a requirement that requires all candidates for District employment to be fully vaccinated for COVID-19, including variants, prior to being employed by the District, subject to limited exceptions. AC Transit adopted this vaccination policy as an emergency public health response to mitigate the negative public health consequences associated with increased incidence and test positivity rates and the prevalence of new virus variants, including increased hospitalizations, intensive care unit admissions, and deaths.
As such, candidates seeking District employment will be required to: (1) be fully vaccinated (two weeks after completion of the entire recommended COVID-19 vaccination series) and (2) submit a copy of their COVID-19 vaccination card prior to their start date, unless a reasonable accommodation request for a medical or religious exemption has been approved.

Benefits: The transit professionals who call AC Transit home represent the rich cultural diversity of the Bay Area. For more than 60 years, we have been an equal opportunity employer honoring religion, ethnic background, national origin, gender, gender expression, genetic information, disabilities, age, and veteran status. We are not only an inclusive employer but also offer a comprehensive benefits package rooted in choice, flexibility, and affordability. Most Benefits are effective the first of the month following your hire date. Employees and eligible dependents have access to the following benefits*:

• Medical - Choice of two Health Maintenance Organizations (HMOs): Kaiser Permanente and Health Net. $10.00 office visit co-pays; $5.00 - $35.00 prescription co-pays.
• Dental – MetLife Preferred Provider Organization (PPO) $50 annual deductible per person/$150 per family; $3,000 per person annual maximum; preventative care covered at 100%; basic and major care covered at 90%; $4,000 lifetime maximum orthodontia covered at 50%.
• Vision - Vision Service Plan - $10.00 copay; eligible for an exam, lenses, frames or contact lenses every 12 months – based on the last date of service. $200 frame allowance or $120 allowance for contact lenses.
• Employer paid Basic Life Insurance
• Employee paid Voluntary Term Life Insurance
• Employee Assistance Program (EAP)
• Retirement – employees automatically participate in a lifetime defined benefit plan and have the option to contribute to a 457 deferred compensation plan via payroll deductions.
• All employees hired on or after January 1, 2016 may be in the District’s Tier II pension plan covered by the Public Employees’ Pension Reform Act of 2013 (PEPRA). As such, employee may be required to contribute a small portion of annual income towards the cost of the pension.
• Flexible Spending Accounts (FSA) for Health Care, Dependent Care, Parking, Transit
• AC Transit contributes up to $50.00/month towards an employee’s FSA Transit costs
• Free AC Transit Bus Pass
• Federal Credit Union
• Vacation and Sick Leave or Personal Time Off
• Nine (9) paid holidays; 2 paid floating holidays; 1 paid birthday holiday
• Tuition Reimbursement – up to $2500 per fiscal year on approved courses
• Wellness Program
• *AC Transit benefits are negotiated and subject to change based on collective bargaining agreements.
• Pension: All AC Transit employees participate in a lifetime defined benefit pension. All employees hired on or after January 1, 2016, may be in the District's Tier II pension plan covered by the Public Employees' Pension Reform Act of 2013 (PEPRA). As such, he/she may be required to contribute a small portion of annual income towards the cost of his/hers District pension.

ADA Compliant and Drug Free Workplace: The Human Resources Department will make reasonable efforts in the recruitment/examination process to accommodate applicants with disabilities. If you have a need for an accommodation, please call Human Resources at (510) 891-4783.

The Alameda Contra Costa Transit District has established the goal of a 100 percent drug and alcohol-free workplace. Applicants will be required to undergo drug and alcohol testing prior to employment and those in safety sensitive positions will be subject to further drug and alcohol testing through their period of employment, including random drug and alcohol testing.

In accordance with federal requirements, all job applicants selected for appointments in a safety sensitive position are subject to pre-employment drug and alcohol testing. A final job applicant will be tested for five prohibited drugs: Cocaine, PCP, Amphetamines, Marijuana and Opiates. During employment, employees holding safety sensitive positions are subject to random, reasonable suspicion, post-accident, return-to-duty, and follow-up drug and alcohol testing. Additionally, in the event of an absence of more than 90 days from a safety sensitive position, pre-employment drug testing will be performed.

APPLICATIONS MAY BE FILED ONLINE AT:
http://www.actransit.org
1600 Franklin Street Oakland, CA 94612 510-891-7148
employment@actransit.org
Equal Opportunity Employer

Position #22-00480 PROJECT MANAGER I (UTILITY LOCATION AND MARKING) MC
Project Manager I (Utility Location and Marking) Supplemental Questionnaire

1. Explain how you would perform utility marking and what equipment and tools would you use?
2. Describe your experience performing utility coordination. What are the conventional color codes used to mark utilities.
3. Explain the 811/USA system and program. How do you know what to mark and when to mark it?
4. Should you proceed through our recruitment process, are you willing to submit to a pre-employment drug and alcohol test? (Testing is paid for by the District) Yes/No
5. If you do not pass the pre-employment drug and alcohol test according to District standards, you will be disqualified from this recruitment. Do you understand the statement above? Yes/No
   *Required Question