Search Jobs

The Bay Area Air Quality Management District (Air District) is a regional government agency, committed to achieving clean air to protect the public's health and the environment. The Air District accomplishes this goal through regulation of industrial facilities and various outreach and incentive programs designed to encourage clean air choices. 

The Air District's jurisdiction encompasses all of seven counties - Alameda, Contra Costa, Marin, San Francisco, San Mateo, Santa Clara and Napa, and portions of two others - southwestern Solano and southern Sonoma.
 
The Air District is currently accepting applications for the position of Air Quality Engineer I/II in the Air Quality Modeling and Analysis (AQMA) Section of the Assessment, Inventory, and Modeling (AIM) Division. This is an open recruitment for one (1) full-time, represented vacancy position.
 
 DEFINITION
 
Under direction, performs professional engineering work in a variety of areas such as permit application evaluation, calculation of air pollutant emissions, toxic risk screening and health risk assessment evaluations, compliance audits and source testing; performs related work as assigned.
 
 DISTINGUISHING CHARACTERISTICS
 
 Air Quality Engineer I is the entry-level class of this series. Initially under close supervision, incumbents perform a variety of routine air quality engineering duties while learning District policies and procedures and specialized air quality knowledge. With experience, the work becomes increasingly more diversified and difficult and requires increasing independence of judgment. This class is alternately staffed with Air Quality Engineer II and incumbents may progress to the higher level after gaining experience and demonstrating proficiency which meet the qualifications for the higher-level class.

Air Quality Engineer II is the journey level in this series. Incumbents perform a variety of difficult air quality engineering work and exercise a greater latitude of independent judgment. This class is distinguished from Senior Air Quality Engineer in that the latter is the specialist level and performs the more complex air quality engineering duties and provides lead direction to engineering staff.

About the Division

The Assessment, Inventory, and Modeling (AIM) Division prepares comprehensive source emission inventories for the Bay Area and conducts air quality modeling at both regional and community scales. AIM prepares technical assessments that evaluate equity in air pollution exposures and health impacts in support of Air District programs. AIM coordinates and implements programs to improve and report estimates of emissions of criteria pollutants, toxic air contaminants, and climate forcing pollutants. AIM assesses emissions, modeled concentrations, and exposures of toxic air contaminants, particulate matter, ozone and their precursors, to support targeted strategies that reduce impacts of air pollution both regionally and within communities, especially in impacted communities requiring action plans in accordance with Assembly Bill 617 (AB617). AIM reviews and provides guidance on environmental health risk assessments within environmental review documents prepared pursuant to California Environmental Quality Act (CEQA).

Career Opportunity

Senior Engineer (Electrical), Transit Division - SF Municipal Transportation Agency (5211)

Recruitment: REF9940M

Published: June 16, 2022

Keaney Chan - Keaney.Chan@sfmta.com

Department: Municipal Transportation Agency
Job class: 5211-Engineer/Architect/Landscape Architect Senior
Salary range: $175,916.00 - $213,772.00
Role type: Temporary Exempt What does this mean?
Hours: Full-time

• Application Opening: April 21, 2022
• Application Filing Deadline: Continuous
• The Job Announcement has been reopened to accept additional applications. Applicants who have already submitted their application do not need to reapply.
• Annual Compensation: $164,788 - $200,252
• Recruitment ID: RTF0121451-01150748

APPOINTMENT TYPE: Temporary Exempt - This position is excluded by the Charter from the competitive Civil Service examination process and shall serve at the discretion of the Appointing Officer. The duration of the appointment shall not exceed 36 months.

The San Francisco Municipal Transportation Agency (SFMTA or “the agency”) connects San Franciscans with their communities to enhance the economy, environment and, ultimately, the quality of life in the city. As an agency within the City and County of San Francisco, the SFMTA is responsible for managing the city’s transportation network. The agency has more than 6,000 employees who are responsible for the management of all ground and some underground transportation in the city. The SFMTA has oversight over public transit, as well as bicycling, paratransit, parking and curb management, street operations, walking, and taxis.

• Division: Transit Division
• Section/Unit: Program Delivery and Support; Transit Technology
• Work Location: 1455 Market Street, 7th Floor, San Francisco, CA 94103
• Work Schedule: Monday- Friday, 8:30AM- 5:30PM

Project Name: Train Control Upgrade Project

The Transit Division is currently in the process of developing and procuring a new train control system, as well as streamlining operations at the new Transportation Management Center (TMC). The Program Delivery and Support Unit within the Transit Division was created in 2018 to oversee capital program and project budgets, manage vehicle and onboard equipment projects, testing and acceptance of rolling stock and technology projects that will deliver high-quality, cost-effective solutions which improve safety and the Agency’s ability to deliver quality transit service. Within the Program Delivery and Support unit, the Transit Technology Group handles the delivery, acceptance, and management of technology systems which are critical to transit operations.

The Train Control Upgrade Project is an 8-year, multimillion dollar project with the goal of modernizing the existing Automatic Train Control System in Muni’s subway as well as expanding the supervision and limited control aspects of a Communication-Based Train Control System to the entire Muni light rail system.

Under the general direction of the Train Control Upgrade Project Manager, the Lead Project Engineer manages the Train Control Upgrade Project engineering team and acts as the SFMTA lead for the overall system design. The Lead Project Engineer assists the Project Manager with oversight duties related to project design and scheduling to facilitate the procurement, development, and maintenance of the future train control system. Additionally, this position is responsible to the Train Control Upgrade Project Manager for ensuring that the future train control system design meets the SFMTA’s objectives for the project, and that the system design conforms to all applicable SFMTA, state, local, and federal standards.

The Train Control Upgrade Project will be delivered through a series of contracts with the technology vendor (Supplier) and other firms providing installation, construction support, technical expertise, and professional services. The Lead Project Engineer will act as the SFMTA design authority for the project by supervising the production of technical documentation from the project contractors, leading technical coordination between the department and Supplier, and ensuring the future system meets the performance metrics and technical specifications laid out in the Supplier contract(s).

In addition, the Lead Project Engineer will act as the SFMTA technical representative to review, accept, or when necessary, audit, technical project submittals and deliverables provided by the Supplier and other project contractors related to system design. As the SFMTA technical representative, the Lead Project Engineer will have a strong understanding of the project contract requirements and be able to identify key project staff and agency stakeholders for review when evaluating submittals and project deliverables.

Essential Duties:

• Manages a team of SFMTA engineers assigned to the project, including vehicle engineers, electrical engineers, and traffic engineers;
• Responsible to the Project Manager for ensuring the train control system design meets the project objectives as well as applicable SFMTA, state, local and federal design standards;
• Acts as the lead SFMTA design authority for the project, provides technical review and recommendation to the Project Manager for approval/acceptance of project CDRLs;
• As assigned by the Project Manager, represents the SFMTA in reviewing, approving and auditing technical submittals provided by the Supplier and other project contractors;
• Leads the SFMTA technical team during project design reviews and prepares technical comments on behalf of the SFMTA;
• Reviews all technical documents and correspondence from the Train Control System Supplier and other project contractors;
• Prepares and supervises staff and project Consultants in the preparation of documents, including technical specifications, engineering reports, contract documents, advertisement for bids, instructions to potential bidders, detailed project specifications, technical manuals, and contract bonds;
• Assists Project Manager in negotiating contracts and contract modifications;
• Responds to technical RFIs, resolves clarifications from vendors and addresses their requests by issuing addendums;
• Works with the Technical Program Manager and Technology Department engineers on communications infrastructure design and technical coordination between the Supplier and supportive infrastructure installers;
• Works with Real Estate department, Maintenance of Way staff, facilities project team and engineers on ensuring SFMTA facilities are prepared for train control equipment installation;
• Reviews proposals from vendors and evaluates bid documents for conformance with project specifications;
• Observes train control system component installation and ensures installation is occurring according to plans;
• Ensures smooth communication, and when necessary, mediates technical disputes between the train control system Supplier and installers;
• Supervises the train control system testing program and assists the project QA team in assessing the quality of delivered and/or installed components;
• Tracks completion of technical requirements and evaluates the system and individual subsystems and components for acceptance;
• Participates in the RAM demonstration and verifies that the system as designed and delivered meets the project performance metrics;
• Communicates with Train Control System Supplier for technical support as needed to address system issues under warranty;
• Works with Supplier, SFMTA operations and maintenance staff to ensure both the designed and finished train control system meets operations and maintenance needs and works within their stated constraints;
• Reviews and manages workload assignment to consultants, SFMTA engineers, and interns as required;
• Performs other duties as required.

Minimum Qualification:

1. Seven (7) years of verifiable professional electrical engineering work experience of which four (4) years of that experience must be as a licensed professional engineer. Two (2) of the seven (7) years must be equivalent to the City and County of San Francisco class 5241 Engineer; AND
2. Possession of a baccalaureate degree with major course work in engineering; AND
3. Possession of a Certificate of Registration as a Professional Engineer (Electrical) in the State of California.

Substitution:

• A Master's Degree in Engineering may substitute for one-year work experience.
• A Ph. D. in Engineering may substitute for two years work experience.

Desirable Qualifications:

• Technical expertise and knowledge of the principles, practices, purposes, scope and techniques of train control and/or signaling systems.
• Engineering experience working on train control, train signaling systems, transit or communications infrastructure projects;
• Engineering experience working with rail vehicle electrical and/or communications systems;
• Experience working with public transit agencies or as an employee of a public transit agency;
• Leadership experience and/or experience managing a team of engineers on a project;
• Experience working on communications and/or network infrastructure projects;
• Experience managing contracts and overseeing the design and delivery of public sector procurement projects, especially for rail transit agencies;
• Experience managing testing and commissioning vehicle and/or wayside equipment on an active railway;
• Experience working with third-party vendors and contractors to deliver public infrastructure projects on-time and on-budget;
• Excellent written and oral communication skills. Ability to communicate with diplomacy and conduct meetings with stakeholders throughout the agency;
• Technical writing and editing experience; experience writing technical specifications and/or manuals;
• Experience with CAD software or other computer-aided design tools;
• Experience with P6 Primavera, Microsoft Project, or other project management software applications;
• Experience with Microsoft Office products such as Excel, Outlook, and Word;
• Experience interpreting and analyzing telematics data, using Python, SQL, Tableau or other tools to perform calculations and visualize data;
• Ability to work well with a multi-disciplinary, diverse workforce, including operations staff, maintenance technicians, technical professionals, contractors, executives and elected officials, and stakeholder groups

Applicants must meet the minimum qualification requirement by the final filing date unless otherwise noted.

Verification:
Applicants may be required to submit verification of qualifying education and experience at any point during the recruitment and selection process. More information can be found at: https://sfdhr.org/information-about-hiring-process#verification. Falsifying one’s education, training, or work experience or attempted deception on the application may result in disqualification for this and future job opportunities with the City and County of San Francisco.

Selection Process:
Applications will be screened for relevant qualifying experience. Additional screening mechanisms may be used to determine candidates' qualifications.  Only those applicants who most closely meet the needs of the Agency will be invited to move forward in the selection process.

• Information About the Hiring Process
• Conviction History
• Employee Benefits Overview
• Equal Employment Opportunity
• Disaster Service Worker
• ADA Accommodation
• Right to Work
• Copies of Application Documents
• Diversity Statement

For questions or inquiries, please contact: Keaney Chan, Human Resources Analyst at Keaney.Chan@sfmta.com.

All your information will be kept confidential according to EEO guidelines.

CONDITION OF EMPLOYMENT:  All City and County of San Francisco employees are required to be fully vaccinated against COVID-19 as a condition of employment. Someone is fully vaccinated when 14 days have passed since they received the final dose of a two-shot vaccine or a dose of a one-shot vaccine. Any new hire must present proof of full vaccination status to be appointed. Any new hire who will be routinely assigned or occasionally enter High-Risk Settings, must provide proof of having received a COVID-19 booster vaccine by March 1, 2022, or once eligible.

The City and County of San Francisco encourages women, minorities and persons with disabilities to apply. Applicants will be considered regardless of their sex, race, age, religion, color, national origin, ancestry, physical disability, mental disability, medical condition (associated with cancer, a history of cancer, or genetic characteristics), HIV/AIDS status, genetic information, marital status, sexual orientation, gender, gender identity, gender expression, military and veteran status, or other protected category under the law.

Applications will be accepted for this position until filled.

Finance Department

Approx. 40 hours/week

$34.41- $41.82 per hour depending on qualifications

This hourly position is not in Civil Service and does not receive benefits.

DEFINITION

Account Clerk I: Under supervision, perform clerical work of moderate difficulty in connection with preparing, maintaining or checking financial or statistical records; receive and receipt money; operate office accounting machines; do related work as required.

EXAMPLE OF DUTIES

Cashier

The Cashier receives and receipts cash payments and maintains daily files of validated documents; balances transaction and prepares cash reports daily; does responsible clerical accounting work in maintaining financial records, recording and checking financial transactions, and preparing financial or statistical statements or reports; batch balances cash from various City entities; organizes money and sets up daily starting cash drawer; computer posts utility transactions as required; maintains the Petty Cash Fund; answers customer inquiries on account status using computer equipment; issues various parking permits and maintains related files; store, issues, and controls vehicle ignition keys for City pool cars, and records and reports mileage/usage; types routine documents; and assists with various Utility Billing Division activities as required.

Utility Billing Division

Either manually or through the use of computers, as appropriate, does responsible clerical accounting work in the maintenance of financial records, recording and checking financial transactions, and preparing financial or statistical statements or reports; interacts with residents through phone, email, and in person; receives and receipts money; prepares records to open, change, maintain or close utility accounts; performs routine arithmetical computations; opening, sorting, and processing mail; operates adding machines; does routine typing of documents and precise computer data entry of financial data.

MINIMUM QUALIFICATIONS

Knowledge of: 

Account Clerk I level: Methods, principles, and terminology used in financial clerical work; and modern office practices.

Ability to:  

Perform clerical work of average difficulty; prepare basic financial reports, maintain journals, ledgers, and complex files; operate adding and calculating machines; perform arithmetic computations rapidly and accurately; interact positively and cooperate with co-workers, respond politely to customers, work as a team member, function under demanding time pressure, respond in a positive manner to supervision, and attend work and perform duties on a regular and consistent basis.

Experience:

Account Clerk I:  One year of clerical experience involving financial record keeping and general office work; six (6) months of experience using computer spreadsheets is desirable.

Education:  Graduation from high school or equivalent.

The Department of Public Works is seeking well-qualified candidates for the position of Stationary Engineer II.

About the Department
The Department of Public Works plans, designs, constructs, operates, and maintains facilities and equipment that are safe and accessible to the clients of County agencies, the general public, and County employees. The Department advises the Board of Supervisors on all public works issues, including rates and charges for services that are fair to both the users and service providers.
 
Public Works has a budget of approximately $200 million and is comprised of over 300 employees in four divisions: Administrative Services and Airports, Engineering and Resource Protection, Facility and Capital Projects, and Road Services.
 
Facilities Maintenance & Operations
FM&O, short for Facilities Maintenance & Operations, ensures County facilities are safe, comfortable, and clean. From historic landmarks to modern offices, we keep things running smoothly.

The FM&O Stationary Engineers perform maintenance and repairs to the various plumbing, mechanical, and lighting systems throughout County facilities. These include boilers, chillers, pumps, motors, lamps, ballasts, drivers, toilets, sinks, and faucets as well as utilizing the lighting and building control systems to schedule and adjust run times of the various pieces of equipment. There are multiple Stationary Engineer I/II vacancies in FM&O.

Our team turns the screws, tightens the bolts, hammers the nails, paints the walls, and types in the codes to keep all the buildings and their systems working. If it's loose, stuck, hot, cold, light, or dark FM&O gets the call. Whatever it takes, our team does it with professionalism, care, and heart!
 
The Position
Under the direction of a Supervising Stationary Engineer, Stationary Engineers are responsible for a wide variety of repair and maintenance work in the areas of HVAC, electrical, plumbing, refrigeration, emergency power systems, water treatment systems, boiler equipment, and piping repair, building automation systems, and miscellaneous equipment repair. Stationary Engineer II is a journey-level classification, and incumbents are expected to have proficiency, perform independently, and solve complex problems in all of the areas listed above.

There are multiple vacancies to be filled throughout the Department. Work locations will include Redwood City Government Center, San Mateo Medical Center, Youth Services Center, and Maple Street Correctional Facility.
Candidates hired as Stationary Engineers must be willing to work evenings, weekends, and alternate shifts. They must also successfully obtain and maintain a Sheriff's Office security clearance as a condition of employment. 
 
The ideal candidates for these positions will have:

• At least three years of journey-level experience as a Stationary Engineer.
• A minimum of three years of journey-level experience in mechanical, electrical, and plumbing systems.
• Extensive knowledge and experience working with boiler and HVAC systems.
• Proficiency in a wide variety of installations and repairs on plumbing, gas system piping, chiller/boiler piping, and wastewater systems, including the ability to operate a large sewer snake.
• Certification as a Backflow Prevention Tester.
• Experience in energy management and computer-controlled systems.
• The ability to troubleshoot, repair, and maintain a variety of equipment, including air conditioning, electric motors, heating units, heat pumps, light commercial furnaces, burners, fresh air and exhaust fans, economizers, and humidifiers.
• Experience with Fire Alarm testing, troubleshooting, and NFPA codes.
• Experience in a hospital or healthcare setting.

Examples Of Duties:

Duties may include, but are not limited to, the following:

• Operate, maintain, install, and repair electrical, refrigeration, plumbing, heating, air conditioning, and ventilating systems.
• Operate, maintain, and repair boiler equipment.
• Repair and replace pipes, fittings, and other equipment used in plumbing, gas, and steam systems.
• Repair electrical equipment, including lamps, fixtures, and switches; adjust electrical controls, motors, and auxiliary equipment up to 480 volts.
• Test, operate, maintain, and repair emergency power systems, including UPS, emergency generators, and associated equipment.
• Use hand and power tools, including cutting and threading tools, grinders, reamers, wrenches, welders, saws, and other special tools.
• Make minor carpentry repairs to doors, windows, floors, and other parts of buildings.
• Do touch-up painting on repaired equipment.
• Remove or arrange for the removal of trash, pests, and other hazardous materials or debris in the course of performing work. 
• Properly place, set, and inspect traps, and collect and remove insects and pests.
• Reclaim or recycle refrigerant using Freon recovery systems.
• Operate water treatment facility, including wastewater and potable water.
• Adjust and calibrate boiler burners and controls.
• Adjust and calibrate chiller controls.
• Test, calibrate, and repair backflow devices.
• Calibrate HVAC controls and associated equipment.
• Monitor building management systems.
• Replace pumps and pump seals, and repair and replace motor valves.
• Repair and replace air conditioning units.
• Troubleshoot HVAC, plumbing, electrical, and energy power systems.
• Conduct preventative maintenance.
• Understand fire alarm systems.
• Repair and install chemical monitoring stations.
• Repair, test, and record data on generators.

If designated as the certified water treatment operator:

• Operate water treatment facility, including wastewater and potable water, consistent with performance standards, federal and state regulations, and variable operating conditions and emergencies.
• Make periodic inspections and reports of facility conditions to ensure adherence to maintenance procedures.
• Perform water sampling in coordination with the health laboratory.
• Maintain logs of facility operations, test results, scheduled maintenance, and other operating conditions.
• Control filter operations.
• Coordinate special projects related to water treatment and distribution, in close coordination with supervisor/manager.
• Troubleshoot complex technical problems related to water treatment and develop recommendations to improve water quality standards, facility effectiveness, and efficiency.
• Perform quality analysis of raw and treated water.
• Compile data concerning flows, chemical dosages, levels, pressure, volume, water quality, and other operational information.
• Prepare reports.

Qualifications:

Education and Experience:
Any combination of education and experience that would likely provide the required knowledge, skills and abilities is qualifying.  
 

• Completion of courses related to maintenance, installation, and repair of electrical, HVAC, plumbing, refrigeration, and power equipment.
• Two years of journey-level experience as a stationary engineer or equivalent, AND demonstrated experience in maintaining, installing, and repairing electrical, HVAC, plumbing, refrigeration, and power equipment in a large building, plant, or vessel.
• Two years of experience can be substituted with the completion of an apprenticeship program.

Licensure/Certification:

• Must obtain and maintain Sheriff's Office security clearance.
• Universal Certification in Freon recovery upon hire.
• Obtain Backflow Certification within six months of hire and maintain certification.
• If designated as the water treatment operator, possession of or ability to obtain a valid Grade II Water Treatment Operator Certification issued by the State of California within six months of employment is required.

Knowledge of:

• Common safety practices in the workplace.
• Heating and electrical equipment.
• Principles and techniques used in stationary engineering.
• Proper and safe use of basic hand tools.
• Basic arithmetic for measuring, calibrating, and estimating.
• Steam and gas fired heating systems; refrigeration equipment; ventilating and air-conditioning equipment.
• Electrical, plumbing and refrigeration systems.
• Controls and control systems.
• Emergency power systems, generators, and associated equipment.
• Freon recovery procedures and equipment, if at Level II.
• Water treatment systems and operations, principles and practices, and regulatory mandates, if designated as certified water treatment operator.
• Safety rules, regulations, and work practices, including reference to hazardous chemicals.
• Basic record-keeping principles and practices.

Skill/Ability to:

• Follow safety practices.
• Troubleshoot and/or repair, replace, regulate and control electrical, refrigeration, plumbing, heating, air conditioning, and ventilating systems.
• Determine and estimate materials required for a job and prepare requisitions.
• Use hand and power tools.
• Make metal parts and equipment.
• Perform minor carpentry and painting tasks.
• Follow oral and written instructions.
• Communicate effectively, courteously, and professionally with customers and others.
• Read and interpret plans.
• Prepare and maintain accurate maintenance records.
• Operate standard office equipment, computers, and timekeeping systems.
• Lift and carry materials, supplies, and equipment; climb ladders; and crawl in tight spaces.
• Perform water treatment plan and distribution system operations and maintenance activities if at Level II and designated as water treatment operator. 

Application/Examination:

Open and Promotional. Anyone may apply. Current County of San Mateo employees with at least six months (1040 hours) of continuous service in classified regular, probationary, extra-help/limited term position prior to the final filing date will receive five points added to their final passing score on this examination. 
 
The examination process will consist of an Application Screening (weight: pass/fail), and an Interview (weight: 100%), which may include a performance exam. Depending on the number of applicants, an application appraisal of education and experience may be used in place of other examinations, or further evaluation of work experience may be conducted to group applicants by level of qualification. All applicants who meet the minimum qualifications are not guaranteed advancement through any subsequent phase of the examination. All examinations will be given in San Mateo County, California, and applicants must participate at their own expense. 

IMPORTANT:  Applications for this position will only be accepted online. If you are currently on the County's website, you may click the “Apply” button. If you are not on the County's website, please go to https://jobs.smcgov.org/ to apply. Responses to the Supplemental Questionnaire must be submitted in addition to the standard County employment application form. A resume will not be accepted as a substitute for the required application materials. Online applications must be received by the Human Resources Department before midnight on the final filing date.

This is a continuous recruitment which may close at any time. The final filing date will be posted five days in advance on this job announcement.

Apply immediately. This recruitment is open on a continuous basis and selections may be made at any time within the process.

Tentative Recruitment Schedule: 
Round 1 of Screening: Week of May 12, 2025
Round 1 of Panel Interviews: Week of May 16, 2025
Round 2 of Screening: Week of June 16, 2025
Round 2 of Panel Interviews: Week of July 7, 2025
Round 3 of Screening: Week of July 28, 2025
Round 3 of Panel Interviews: Week of August 11, 2025

The City of Belmont Public Works Department is recruiting for the position of Mechanic.

The City’s Mechanic position is responsible for maintaining, servicing, and repairing all City-owned vehicles and light and heavy equipment; troubleshooting and diagnosing vehicle malfunctions; performing preventive maintenance on vehicles and equipment; and performing a variety of tasks relative to assigned area of responsibility.  The Mechanic receives general supervision from the Senior Mechanic.

Recruitment Timeline

Deadline for Applications – July 20, 2025 at 11:59PM

First Round Interviews – Week of July 28, 2025

Department Interviews - Week of August 4, 2025

*Dates may be subject to change

The responsibilities and duties of the Mechanic may include, but are not limited to, the following:

• Inspect, diagnose, maintain and repair mechanical defects in vehicles, light and heavy equipment, trucks, tractors, rollers and related City equipment.
• Troubleshoot and repair problems in vehicle electrical, cooling, brake and steering systems; change and repair tires as needed.
• Inspect, diagnose and maintain batteries, alternators, voltage regulators and electrical engine controls; install new lights, wires, alternators, distributors, relay lights and switches.
• Disassemble engines, transmissions, clutches and other driveline components; perform general overhauling.
• Tune, repair and adjust engines, transmissions, drive shafts, rear-ends and smog components on City vehicles and power driven equipment; lubricate and change oil and filters.
• Replace and/or repair any worn parts in vehicles, trucks, tractors, sweepers, rollers and other mechanical equipment including but not limited to spark plugs, brakes, master cylinders, wheel cylinders, wheel bearings, clutches and exhaust systems.
• Perform welding as required to repair equipment.
• Maintain accurate and up-to-date records of time, work, parts, materials and outside service costs.
• Perform duties while utilizing a variety of hand tools and other equipment including brake tools, drill presses, grinding equipment, welders, cutting torches, lifts and related equipment; operate all tools and equipment in a safe manner.
• Estimate cost and time of procedures; prepare invoices.
• Maintain cleanliness in the shop area.
• Perform related duties and responsibilities as required.

To review the complete job description, visit Mechanic Job Class Specification

The San Mateo County Attorney's Office is seeking candidates for the 2026 Michael P. Murphy Public Law Fellowship.

In 2014, the County of San Mateo established a Fellowship position in honor of former San Mateo County Counsel Michael P. Murphy. Mr. Murphy served in the County Counsel’s office from 1982 to 2011, the last four years as County Counsel. Vacancies in Bay Area county counsel offices typically attract many qualified applicants and new attorneys are generally not considered for these positions. This Fellowship provides an opportunity for new attorneys to receive training and experience in advising and litigating on behalf of government agencies as they begin their legal careers.

Attorneys in the San Mateo County Attorney’s Office (previously known as the County Counsel’s Office) are generalists. We provide legal advice to County departments, school districts, and special districts; litigate civil cases in State and Federal courts and before administrative agencies; and manage calendar assignments in Dependency, Probate, Lanterman Petris Short Act, and other specialized areas of law. Fellows are given the opportunity to experience a wide range of public sector work, in litigation, public policy, and advice roles. The goal is to provide each Fellow a year in the life of a Deputy County Attorney.

The one-year Fellowship position is focused on providing opportunities to recent law school graduates and judicial clerks. This Fellowship will begin in the Fall of 2026. Law School graduates who will be sitting for the 2026 July Bar Exam are encouraged to apply.

The annual salary range for the position is $131,673 to $187,860.

To apply, please submit in one combined PDF: a resume, cover letter, writing sample, unofficial transcript, and a list of references to cc_applications@smcgov.org by 11:59 p.m. on September 1, 2025.

Applications will be accepted by email only (cc_applications@smcgov.org).

The Maintenance Instructor is responsible for all the classroom and on-the-job training activities relating to current bus maintenance for the San Mateo County Transit District (SamTrans), Caltrain, and the San Mateo County Transportation Authority (TA).

• Develops classroom on-the-job training and exit examinations relating to SamTrans Core Maintenance Training Curriculum: Shop Safety and PM Procedures, Core Repair Skills, Air Brake Systems, HVAC Systems, Basic Electrical Systems, Multiplex and Charging Systems, Diesel Engine Electronic Controls, Diesel Engine Tune-up and Troubleshooting, Light Duty (hydraulic) Brake Systems, Vehicle Subsystems, HD Steering Hydraulic Systems, and Suspension Systems, Automatic Transmission, ACS Diagnostics & Repair, Fare Collection Equipment, Hybrid Drive Systems, Battery Electric Drive Systems and Fuel Cell Battery Electric Bus Systems, Camera System Maintenance & Repair, Medium Duty Gasoline Engines.
• Serves as one of the principal instructors.  Oversees and evaluates vendor provided training activities.
• Oversees on-the-job training activities, mentors, coaches, guides, and directs progressive maintenance training. Maintains written and electronic records and performs proficient evaluations. 
• Collaborates in the development and implementation of testing programs for bus maintenance personnel.
• Develops and implements all maintenance safety training programs in collaboration with the Safety Department and management. Certifies that District employees meet established requirements for Forklift Operation, Hazardous Materials First Responder, First Aid, CPR, and AED Training.
• Oversees the District’s maintenance training programs.

Examples of Duties

• Stays current with new developments in the field of Training and Adult Learning Strategies.  Assesses the effectiveness of in-house training programs and recommends program upgrades with presented examples.
• Conducts skills gap assessments.  Develops a comprehensive training curriculum for all mechanic classifications, including Utility Workers, and reviews and updates as needed based on current technologies.
• Stays current with new technologies as they pertain to District fleets.
• Collaborates on all maintenance programs regarding quality assurance, makes recommendations where necessary to ensure the quality of the workforce training programs, and works with appropriate maintenance management staff to ascertain requirements and changes within industry best practices.
• Helps plan, organize, and execute the SamTrans Maintenance Rodeo and competition teams.  Mentors and coaches the maintenance team at the regional and international competition.
• Assumes the duties of Chair and/or Secretary of the joint Labor-Management Maintenance Training Committee.
• Ensure core curricula follows all regulatory and safety requirements, and best practices.
• Develops and implements training programs for newly hired employees.
• Performs all job duties and responsibilities in a safe manner to protect self, fellow employees, and the public from injury or harm.  Promotes safety awareness and follows safety procedures in an effort to reduce or eliminate accidents.
• Perform other duties as assigned.

Sufficient experience, training and/or education to demonstrate the knowledge and ability to successfully perform the essential functions of the position. In lieu of a degree, work-related experience that demonstrates the skills and experience necessary to perform this role will be accepted. Development of the required knowledge and abilities is typically obtained through but not limited to: 

• High School Diploma or equivalent
• Six (6) years of related progressive full-time experience as an automotive/truck diagnostic technician, repair technician, or instructor.
• Experience assessing and training others in a classroom or shop environment is required.
• Experience with powertrain electronic controls, on-board Hi-Voltage systems, on-board Hi-pressure systems, ABS, HVAC, and PLC systems is required. 
• Strong oral and written communications skills.  Knowledge of word processing and spreadsheet programs.
• Demonstrated journey level mechanic experience showing knowledge, expertise and ability to troubleshoot advanced systems and make repairs.

Preferred Qualifications

• Zero emission technology including battery electric and hydrogen fuel cell experience highly desired.
• Experience in conducting skills and needs assessment surveys desired.

 

The selection process may include a panel interview, written and skills test assessments, or supplemental questions.  Only those candidates who are the most qualified will continue in the selection process. Meeting the minimum qualifications does not guarantee an invitation to continue in the process.      

 

How to Apply

• Complete an online employment application by 11:59 p.m. of the listed closing date.  Resumes and cover letters will not be accepted in lieu of fully completed applications.  It is the applicant’s responsibility to ensure that applications are completed with all relevant information (experience, education, certifications, licenses, references and/or other information). 

• The Human Resources Department will make reasonable efforts in the recruitment/examination process to accommodate applicants with disabilities upon request.  If you have a need for an accommodation, please contact the Human Resources Department.   

• We celebrate diversity and are committed to creating an inclusive and welcoming workplace environment.  We are an Affirmative Action/Equal Opportunity Employer.  Minorities, Women, Persons with Disabilities and Veterans are encouraged to apply. 

The County of San Mateo Probation Department is seeking highly qualified candidates with exceptional leadership qualities for the position of Assistant Superintendent - Probation Services Manager.

Please click here to review the job brochure for details about the position. For a PDF version of the brochure, please click here.

ABOUT THE ROLE ABOUT THE ROLE

Reporting to the Superintendent of Institutions, the Assistant Superintendent plays a critical leadership role in ensuring the care, custody, and rehabilitation of youth in juvenile hall. You’ll manage core operations and supervise staff across functional areas while fostering a culture rooted in accountability, respect, and positive transformation. Inside the hallways of the Youth Services Center School Department. This role requires sound judgment, strong administrative skills, and a deep understanding of juvenile justice practices. You’ll work closely with medical and mental health professionals, court representatives, and community partners to ensure comprehensive support for youth in custody.

KEY RESPONSIBILITIES KEY RESPONSIBILITIES

• Directly supervise and support Institution Services Managers and facility staff
• Ensure safe and effective operation of juvenile facilities in compliance with state and local policies
• Interpret court orders and oversee appropriate case execution
• Collaborate with law enforcement, health providers, and educational institutions
• Guide staff development, training, and performance evaluation
• Analyze data, prepare reports, and drive operational improvements
• Represent the Probation Department at meetings, hearings, and public forums
• Promote a rehabilitative environment focused on growth, accountability, and future success for detained youth

WE’RE LOOKING FOR SOMEONE WHO CAN DEMONSTRATE:

• Knowledge of human behavior, justice systems, or rehabilitation, gained through education, training, or experience
• Ability to perform probation-related duties like case management, report writing, and collaboration with partners
• Strong communication and interpersonal skills to work with diverse populations
• Sound judgment in applying policies and procedures fairly
• Experience handling complex casework in a public agency, nonprofit, or justice-related setting
• Experience promoting a rehabilitative milieu focused on future success for detained youth

A typical way to gain these skills may include a bachelor’s degree in a related field such as sociology, psychology, or justice studies, or two years of relevant experience in probation or community-based work.

TENTATIVE RECRUITMENT SCHEDULE

Final Filing Date: Tuesday, August 5, 2025, by 11:59 PM PST

Application Screening: August 11 - 15, 2025

In-Person Civil Service Panel Interviews: August 28 and/or 29, 2025

The Bay Area Air Quality Management District (Air District) is a regional government agency, committed to achieving clean air to protect the public's health and the environment. The District accomplishes this goal through regulation of industrial facilities and various outreach and incentive programs designed to encourage clean air choices.
 
The Air District's jurisdiction encompasses all of seven counties - Alameda, Contra Costa, Marin, San Francisco, San Mateo, Santa Clara and Napa, and portions of two others - southwestern Solano and southern Sonoma.
 
The Air District is currently accepting applications for the position of Senior Air Quality Engineer in the Engineering Division. This is an open recruitment for four (4) full-time, represented positions.

Staff may be assigned to sections that are focused on specific industries, such as petroleum refineries, organics recovery facilities (e.g., landfills, wastewater treatment) or inorganic material handling facilities (e.g., asphalt plants, concrete batch plants, quarries) OR lead specific programs such as Title V permitting for the division.

EXAMPLES OF DUTIES (Illustrative Only)


Performs the more difficult and complex air quality engineering work such as, but not limited to, permit processing for petroleum refineries, power plants and semiconductor manufacturing facilities, air pollution dispersion modeling, providing detailed source inventories and providing project leadership.

Upon assignment, provides lead direction training and work review to Air Quality Engineers on routine, continuing or well-defined tasks, priorities and follows up on work to ensure timely completion. Coordinates and reviews the work of engineering and support staff involved in complex, sensitive and controversial engineering projects, studies and audits.

Provide engineering expertise in preparing and updating the emission inventory and other aspects of State and Federal air quality plans, including developing required programs, structuring data and preparing long-range emission forecasts for major industrial classifications.

Represent the District as technical expert in meetings with outside agencies, environmental groups and industry personnel regarding air quality control regulations, and source inventory procedures and results; act as an expert witness before the Hearing Board.

Upon request, provides input into selection decisions and performances. Coordinates technical data gathering and compilation, including coordination with other District sections and divisions.

Reviews permit and enforcement files to prepare materials and responses for variance requests, violation notices and case summaries and hearing board referrals; recommends appropriate actions; may testify of behalf of the District.

Coordinates on-site compliance inspections of sources and abatement devices; evaluates compliance and recommends enforcement actions.

Responds to industry, public and District inquiries regarding regulation interpretation, permit preparation, various compliance measures and emission calculation methods in person, by telephone and in writing.

Reviews and evaluates new developments in motor vehicle technology, fuels, and test procedures, as they affect air pollutant emissions.

Develops and recommends revisions to District procedures and regulations.

Uses a computer terminal and a variety of software and programs to make engineering calculations, enter and retrieve data and to monitor and correct data entry; writes and revises computer programs; investigates and corrects errors in the data bank.

Acquires, evaluates, and applies computer models to simulate motor vehicle use and calculate vehicle emissions.

Coordinates toxic risk screening and risk assessment analysis; calculates toxic emissions, determines and applies appropriate air dispersion models, calculates maximum concentrations and calculates risk; recommends approval or denial of permit applications.

Performs, reviews, and directs the preparation of air quality impact analyses for permits, risk assessments and environmental impact documents.

Uses emissions models, geographic information systems, and relational data base to prepare and modify large data files on inventory input to air quality models.

May manage contracts with vendors and consultants.

Develops procedures to calculate and forecast pollutant emissions from natural and man-made sources of air pollution.

Conducts environmental audits, compliance inspections and source tests; evaluates results and recommends appropriate actions, including violation notices.

Participate in calculating, reviewing, correcting and documenting the emissions inventory; evaluates accuracy of source emission calculations and methodologies.

Conduct special studies and write technical reports related to research and planning functions, and coordinate activities with District Staff, outside agencies and organizations.

Prepare new regulations and evaluated revisions to existing District procedures and regulations based upon changes in State and Federal programs.

Minimum Qualifications

A typical way to obtain the knowledge and skills is:
 
Equivalent to graduation from a four-year college or university with major coursework in environmental, chemical, mechanical or petroleum engineering or a closely related field and two years of air quality environmental engineering experience at a level equivalent to the Air District's class of Air Quality Engineer II.

A directly related graduate degree may be desirable for some assignments and may be substituted for one year of experience.


Skill in:
Applying sound engineering principles and techniques in difficult and complex air quality engineering matters.
 
Computing complex engineering calculations quickly and accurately.
 
Performing detailed analyses of designs, specifications and plans.
 
Coordinating a variety of air quality engineering studies.
 
Establishing and maintaining effective working relationships with those contacted in the course of the work.
 
 Preparing clear and concise reports, correspondence and other written materials.
 
 Exercising sound independent judgement.

Other Requirements:
Must possess a valid California driver's license. Some positions may require the physical strength and agility to climb ladders and towers and work in the presence of potentially hazardous or toxic materials.

Are you someone who thrives in a fast-paced environment where every day brings new questions and challenges? Do you enjoy helping people navigate complex rules and processes? Do you take pride in accuracy, organization, and delivering excellent customer service?  Would you like to be part of a small-town community where your work truly makes a difference? Come join the Town of Los Altos Hills!

The Town is seeking a detail-oriented and customer-focused Building Technician to join our outstanding Community Development team. This newly budgeted, full-time position will enhance how our team supports the Town's residents and ensure the permitting process is smooth, precise, and community-focused. As a Building Permit Technician, you’ll play a key role in guiding property owners, contractors, and professionals through the permitting process. You’ll help ensure projects meet Town regulations while maintaining the high level of service our community expects.

Key Responsibilities:

As a Building Permit Technician, you will:

• Provide courteous and professional assistance at the public counter, by phone, email, and virtual platforms to answer questions about building permits, requirements, and the permit process.
• Answer basic questions about building permit requirements, processes, and Town regulations.
• Receive and review building permit applications and related documents for completeness.
• Enter, track, and maintain permit records and data using the Town’s permit management software.
• Prepare, issue, and file permits and related documents accurately.
• Calculate and collect permit fees and issue receipts.
• Maintain organized records and filing systems for building permits, plans, and related documents.
• Provide administrative support to the Community Development team, including preparing reports, correspondence, and notices as needed. 
• Learn and apply basic knowledge of the Building, Mechanical, Plumbing, Electrical, and Municipal Codes as they relate to permit processing.
• Assist with other tasks or special projects as assigned.