Search Jobs

ABOUT THE POSITION

The Town of Atherton invites you to apply for the position of Associate Engineer in the Public Works Department. The position, general supervision, performs various professional field and office engineering work related to the management, planning, design, construction, and maintenance of the Town’s public works infrastructure, associated with the Capital Improvement Program (CIP); provides project management oversight, coordination and administration; conducts development plan reviews and inspections; confers with developers, contractors, and representatives of other agencies regarding facility and infrastructure development and maintenance; administers professional services and construction contracts; provides professional staff assistance to the Director of Public Works, other departments, and the public in areas of expertise; performs a variety of studies and prepares and presents staff reports; and assist in the development of the Department budget and monitors revenue and expense budgets on an ongoing basis.

Typical duties include, but are not limited to:

• Plans, manages, designs, and inspects all phases of civil engineering public works construction projects, including defining the scope of the project; coordinating with permitting and public utility agencies; applying engineering principles and practices to specific problems; coordinating construction schedules with other projects and agencies; preparing and reviewing cost estimates; and inspecting construction of projects to ensure compliance with construction documents; performs related planning and design work.
• Review of proposed private development projects; including issues related to public works, hydrology, grading, scheduling, traffic control, and erosion; prepares public works conditions of approval for proposed development.
• Reviews construction plans prepared by consulting engineers and private contractors; checks plans for conformance with regulations; reviews engineering calculations; participates in pre-design, construction, and coordination meetings and issues construction permits.
• Develops consultant requests for proposal for professional and/or construction services and the advertising and bid processes; evaluates proposals and recommends project award; administers contracts after award; ensures contractor compliance with Town standards and specifications, time and budget estimates; analyzes and resolves complex problems that may arise; recommends and approves field changes as required.
• Monitors and pursues grant opportunities for improvements in public works programs.
• Participates in the development of the Town’s Capital Improvement Program (CIP)
• Participates in the San Mateo County Cleanwater Program and assists with compliance and reporting associated with the Municipal Regional (NPDES) Stormwater Permit.
• Performs other related duties as required.

THE IDEAL CANDIDATE

Will embrace the Town’s emphasis on excellent customer service; will be detail-oriented and able to manage multiple tasks; will successfully perform work requiring critical thinking and be able to synthesize and summarize information; will use initiative and independent judgment; will be a team player who likes working with a variety of Town staff, contractors and the public.

In addition, the ideal candidate will be an effective communicator, possess a general knowledge of municipal operations, development services operations, design and construction principles and practices, public contract code, green infrastructure and storm water control measures, and the SFBAY Municipal Regional Stormwater Permit.

SELECTION PROCESS

A Town application is required with a letter of interest and current resume. All applications will be reviewed for accuracy, completion, relevant education, experience, training, and other job-related qualifications.

MINIMUM QUALIFICATIONS

Sufficient education, training and/or work experience to demonstrate possession of the knowledge, skills and abilities, which would be typically acquired through:

Education & Experience

Three (3) years of increasingly responsible experience professional engineering design, plan review, and project administration.

Education: Equivalent to graduation from an accredited four-year college or university with major coursework in civil engineering or a related engineering field.

Certification: Posses and maintain a valid certificate of registration as a Professional Engineer in the State of California.

Knowledge of:

• Civil engineering principles, techniques, policies, and procedures,
• Principles and practices of capital improvement program budgeting, cost estimation, funding, project management, and contract administration,
• Basic principles, practices, procedures, and standards related to Town public works infrastructure development and maintenance, engineering, and surveying
• Practices of researching engineering and design issues, evaluating alternatives, making sound recommendations, and preparing and presenting effective staff reports

Skills and Ability to:

• Prepare, understand, and interpret engineering construction plans, specifications, and other contract documents.
• Assist in and develop and administer contracts for professional services and construction in a public agency setting.
• Effectively represent the department and the Town in meetings with governmental agencies, community groups, and various business, professional, and regulatory organizations and individuals.
• Prepare and present clear, concise, and logical written and oral reports, correspondence, policies, procedures, legal descriptions, and other written materials.
• Establish and maintain cooperative working relationships with municipal officials, subordinate employees, contractors and the general public
• Keep accurate records and prepare clear and concise oral and written reports.

The Town of Atherton is proud to be an Equal Opportunity Employer!

The Immigration Act of 1986 requires proof of identity and eligibility for employment at date of hire.

Any provisions contained in this bulletin may be modified or revoked without notice

The County of Yuba is currently recruiting for the positions of Assistant Engineer, Associate Engineer and Associate Civil Engineer for the Public Works Department in the Community Development and Services Agency. Currently, there are two vacancies that may be filled at either the Assistant Engineer, Associate Engineer, or Associate Civil Engineer level depending on qualifications. These classes are alternately staffed and incumbents may advance to the higher level after gaining experience, required certifications and demonstrating proficiency which meet the qualifications and expectations for the higher level class. The incumbent to this position will perform engineering work, including preparing design plans, specifications and engineering estimates related to roads, bridges, culverts and other County infrastructure; project management; assist in developing and administering professional services or construction project contracts; review plans and inspect projects; collect and present data and prepare reports; provide information and advice to the public and perform related work as assigned. 

Assistant Engineer: is the entry level in the civil engineer series. Initially under close supervision, incumbents will provide assistance to management staff or higher level engineers in the areas of research, data collection, project administration, preparation of reports and preparation of engineering plans and specifications. Assignments are intended to provide background in the fundamental principles and practices of public service engineering.

Associate Engineer: is the journey level in the civil engineer series. Under general supervision, incumbents independently conduct design, research and construction project inspection and analyses for a variety of projects within the county. Responsibilities may also include providing work direction to technical support staff.

Associate Civil Engineer: is the advanced journey level in the civil engineering series. Under general direction, incumbents perform professional engineer work and prepare civil design plans for various Public Works projects; independently conduct engineering feasibility cost, research and design studies and construction project work; analyses for varied department and agency projects and functions; signing off designs and as-built changes related to roads, bridges, culverts and other County infrastructure and perform related duties as assigned.

About CDSA:

The Community Development and Services Agency (CDSA) strives to improve the overall quality of life for our residents and fiscal health of our businesses by coordinating the orderly growth and development of the County. We accomplish this by providing proper implementation of related regulations, providing community services, and by providing operation, maintenance, and expansion of Public Works infrastructure.

Description

DEADLINE TO APPLY: First Review: Friday, February 17, 2023 @ 5:00 PM PST
 

THE DEPARTMENT
The Department of Public Works and Utilities is comprised of six divisions that work collaboratively to develop, build, operate, and maintain Hayward's infrastructure. The Department is responsible for providing engineering and transportation support to City operating departments and divisions and for implementation of the City's Capital Improvement Program, all while providing excellent customer service to the community.  

DEFINITION 
To perform a variety of paraprofessional office and field engineering work including drafting, minor design work, engineering records preparation and maintenance and operation of equipment and instruments; may work as survey crew member in support of surveying and other civil and traffic engineering functions.

DISTINGUISHING CHARACTERISTICS 
This is an entry level classification that assists higher level technical and professional engineers in all activities of the Engineering & Transportation Division. The Engineering Technician is responsible for conducting traffic, engineering and similar studies for public works projects, and for assigned technical engineering tasks, preparing plans and estimating for various design and construction activities. It is distinguished from the Assistant Civil Engineer which is the journey level classification with responsibility of the more complicated technical tasks. 

 

Essential Duties

Duties may include, but are not limited to, the following: 

Performs non-routine drafting assignments which require application of standardized drawing technique
Gathers field data for planning, design and construction. 
Prepares accurate drawings from design notes, sketches and field survey notes. 
Makes traffic counts and prepares simple diagrams of intersections showing sight distances and traffic flow. 
Makes speed surveys, polls motorists and pedestrians, and prepares diagrams of accident frequencies.

ESSENTIAL DUTIES
Makes computations to determine quantities and costs. Performs complex mathematical calculations by using accepted formulas, manuals and equipment. Reads and interprets maps and other engineering records and prepares legal descriptions of property. Corrects and re-designs construction plans for street improvements, utility installations, drainage and material quantities by using appropriate calculations, computations and engineering data and by consulting with engineers. Performs survey office work using drafting tools while employing mathematical and engineering data to prepare information for use by survey field crews, construction crews and construction inspectors. Interprets information from survey field work for use in mapping, designing construction plans, analyzing earthquake fault monitoring data and updating survey records. Performs various duties associated with land surveying including using measuring tapes and level rods to assist in determining lines, angles, points, elevations and distances. Performs various record keeping and file maintenance duties such as recording instrument readings in field survey notes, maintaining office files of notes, control data, monument records, surveyors maps, and construction drawings. Prepares and maintains accurate “as-built” plans from notes from contractors of completed projects. Computes horizontal and vertical curves. Calculates distances, earth work quantities, fees and charges. Performs plan checking by comparing drawings of proposed improvements against drawings which illustrates established engineering standards applicable to various projects.

JOB RELATED AND ESSENTIAL QUALIFICATIONS
 
Knowledge of: Algebra, geometry and trigonometry. 
Proficient in AutoCAD Civil 3D drafting including working with raw topographic survey points to build surfaces, produce maps, renderings, view graphs, cross-sections and plan and profiles.

Ability to:
Perform basic engineering and surveying calculations.
Interpret construction drawings, field survey notes, deeds, maps and other legal descriptions and to extract pertinent information. 
Maintain neat and accurate records. 
Understand and carry out oral and written instructions. 
Communicate effectively orally and in writing. 
Establish and maintain cooperative and effective relationships with those contacted in the course of work. 
Visualize the practical application of designs. 
Manage extensive public contact. 
Draft engineering plans from rough layouts. 
Prepare exhibits using a variety of software applications.

Minimum Qualifications

Any combination that would likely provide the required knowledge and abilities to perform the duties of this position would be qualifying.  A typical way to obtain them would be: 

Experience: Two (2) years of experience in engineering drafting and calculations, performing responsibilities related to engineering design, construction, inspection and or traffic.

Education: Equivalent to completion of the twelfth grade supplemented by courses in algebra, geometry, trigonometry land surveying, engineering design, construction inspection, and or traffic engineering. An Associate degree in a related field is desirable.

Training: Any recent training such as academic courses, and certification programs which are relevant to this job classification.

License and Certificates: Possession of a valid Class C California driver's license and satisfactory driving record as determined by the City.

The City of Lincoln is hiring a Civil Engineer!

We are accepting applications to fill an Engineer position in the Engineering Department.  The incumbent will be part of a team of seven working on the City's capital engineering projects.  The position will be filled at any level of the Civil Engineer classification series, dependent upon candidate qualifications.  The salary ranges for each class level are as follows:

• Assistant Engineer:  $73,576.00 to $98,598.87
• Associate Engineer:  $94,183.25 to $126,214.57
• Senior Engineer:  $106,795.51 to $143,116.19

DISTINGUISHING CHARACTERISTICS

The Assistant Engineer is the entry level class in the professional civil engineering series and is responsible for performing the professional engineering work not requiring registration as a Civil Engineer. This classification is distinguished from the next higher classification of Associate Civil Engineer in that the latter performs the more complex and difficult assignments within the division.

The Associate Engineer is the journey level class in the professional civil engineering series and is responsible for performing the more complex design and construction of capital improvement projects and for reviewing private development projects for design conformance and accuracy. Incumbents perform complex professional engineering assignments requiring considerable knowledge of various aspects of civil engineering including land development, planning, design standards and regulations, construction and maintenance. This classification is distinguished from the next higher classification of Senior Civil Engineer in that the latter performs the most complex and difficult assignments within the division and may exercise direct supervision over assigned project staff.

The Senior Civil Engineer is an advanced journey level registered professional engineer class and exercises full responsibility for planning and organizing a variety of assigned engineering projects and directing the work of assigned staff. Incumbents perform complex professional engineering and program management assignments demanding considerable knowledge of various aspects of engineering and related program requirements including land development, planning, design standards and regulations, construction and maintenance. This classification is distinguished from the Associate Civil Engineer by the level of accountability expected in the performance of the most complex and difficult assignments, and the performance of program management responsibilities.

SUPERVISION RECEIVED/EXERCISED

This position receives direction from the Engineering Manager, and may receive direction from a Senior Engineer, and the City Engineer.  Associate and Senior Engineers may exercise direct supervision over professional and technical support staff and staff augmentation consultants.

ESSENTIAL FUNCTIONS

May include, but are not limited to the following:

Assistant Engineer

• Performs professional engineering work not requiring registration as a Civil Engineer.
• On a continuous basis, know and understand all aspects of the job.
• Intermittently analyze work papers, reports and special projects.
• Identify and interpret technical and numerical information.
• Observe and problem solve operational situations and technical policies and procedures.
• Explain regulations and procedures to consultants, contractors, developers, the general public, and representatives of other public agencies and other City staff.
• Prepare and check engineering plans and specifications, and engineering reports and studies.
• Understand City engineering policies and procedures, applicable laws and regulatory codes applicable to areas of assigned responsibility, including design, construction, land development, transportation and traffic planning, surveying and mapping, solid waste and landfill operations, storm control and flood control engineering.
• Prepare accurate cost estimates and/or budgets, project schedules, and personnel resources needed for project completion/program accomplishment.
• Prepare effective technical reports with recommendations and finds.
• Work with various and aids in coordinating capital improvement projects with contractors, utility companies and other departments and agencies; in the predevelopment project review process; develops and recommends conditions of approval for projects and conditions for development agreements; aids in plan check services for developers and contractors to ensure compliance with city improvement standards; processes lot line adjustments, ROW abandonments, easement and grant deed dedications.
• Prepares and provides complex engineering reports, correspondence, staff reports, ordinances, and resolutions to the City Manager, City Council, committees, City departments, outside agencies and the public; develops and reports statistics; coordinates storm water and groundwater monitoring and reporting; prepares long range storm water master plans; oversees and performs design and maintenance of geographic information systems; reviews and comments on environmental impact reports and traffic studies; makes oral presentations and participates in organizational and community group meetings;  responds to questions and inquiries, and investigates complaints concerning engineering problems.
• Aids in overseeing the design and development of public works and utility structures and the preparation of project specifications; aids in reviewing plans submitted by consultants and developers to ensure conformity with established standards and regulations.
• Establishes positive working relationships with representatives of community organizations, state/local agencies, City management and staff, and the public.

Associate Engineer

• Performs and oversees a broad range of design activities on a variety of public works projects including street, storm drains, sewers, buildings, airports and other public facilities; oversees the administration of construction contracts; performs field inspections; determines design procedures; prepares plans, specifications, project budget and cost estimates; interprets the application of design criteria; checks plans and specifications for accuracy of design and completeness; makes recommendations and monitors the approved project budgets.
• Coordinates capital improvement projects with contractors, utility companies and other departments and agencies; participates in the predevelopment project review process; develops and recommends conditions of approval for projects and conditions for development agreements; provides plan check services for developers and contractors to ensure compliance with city improvement standards; processes lot line adjustments, ROW abandonments, easement and grant deed dedications.
• Prepares and provides complex engineering reports, correspondence, staff reports, ordinances, and resolutions to the City Manager, City Council, committees, City departments, outside agencies and the public; develops and reports statistics; coordinates storm water and groundwater monitoring and reporting; prepares long range storm water master plans;; reviews and comments on environmental impact reports and traffic studies; makes oral presentations and participates in organizational and community group meetings; responds to questions and inquiries, and investigates complaints concerning engineering problems.
• Oversees the design and development of public works and utility structures and the preparation of project specifications; consults with contractors; reviews plans submitted by consultants and developers to ensure conformity with established standards and regulations; assists in providing advice and instruction to subordinates on design standards and problems from the construction phase to completion of the project; reviews and processes progress payments; prepares, reviews and recommends change orders.
• Establishes positive working relationships with representatives of community organizations, state/local agencies, City management and staff, and the public.

Senior Engineer

• Performs a broad range of design/project management activities on a variety of public works projects, including street, landscaping, storm drainage facilities, sanitary sewer facilities, parks, water production and distribution facilities and buildings; performs site inspections; develops design procedures; prepare plans, specifications, project budget and cost estimates; interprets the application of design criteria; checks plans and specifications for accuracy of design and completeness.
• Manages, develops and coordinates assigned program activities such as industrial waste ordinance management, grease trap enforcement, and other City Municipal Code-related activities, including policy development, community education, regional and state program coordination and required infrastructure modifications; recommend program activity budgets.
• Monitors work activities to ensure safe work practices, work quality and accuracy; ensures compliance to applicable rules, policies and procedures; participates in the development of policies and procedures; recommends programs, projects and work assignments to higher level engineering personnel.
• Assists in the coordination of capital improvement projects with contractors, utility companies and other agencies; administers construction contracts; plans, coordinates, prioritizes, monitors and participates in the work of staff responsible for reviewing design conformance and accuracy of public and private development projects.
• Prepares and provides complex engineering and program reports, correspondence, staff reports, ordinances and resolutions at the direction of the Engineering Manager, or the City Engineer; develops and reports statistics; makes oral presentations and participates in organizational and community group meetings; responds to questions and inquiries, and investigates complaints concerning engineering problems.
• Manages the design and development of public works and utility structures and the preparation of project specifications; consults with contractors; reviews plans submitted by consultants and developers to ensure conformity with established standards and regulations; provides advice and instruction to subordinates on design standards and problems from design inception through the construction phase to completion of the project; provides supervision of field work; prepares, reviews and recommends change orders.
• Manages the engineering aspects of private development projects from pre-application through entitlement approval, through plan review and final map approval, and reviews proposed revisions through the construction phase; supervise, review and participate in preparation of environmental assessments and studies, specific plans, and general development plans, financing plans and Development Agreements; manage and review traffic impact analyses, hydrology studies, storm water quality plans, drainage, sewer, and water master plans, improvement plans, final maps and other technical documents; meet with developers to discuss the proposed project or resolve design issues; manage the annexation of territory into the special districts and assist in the formation of special districts (CFDs, Landscaping & Lighting Assessment Districts, Benefit Assessment Districts).
• Participate in budget preparation and administration; prepare cost estimates for budget recommendations; submit justifications for services, labor, materials and related resources for public works and utilities projects and/or programs; monitor and control expenditures.
• Monitors and keeps informed of current trends in the field of municipal engineering, including legislation, court ruling and professional practices and techniques; evaluates their impact and recommend policy and procedural modifications accordingly.
• Establishes positive working relationships with representatives of community organizations, state/local agencies and associations, City management and staff and the public.

PHYSICAL, MENTAL AND ENVIRONMENTAL WORKING CONDITIONS

Position requires sitting, standing, walking on level and slippery surfaces, reaching, twisting, turning, kneeling, bending, stooping, squatting, crouching, grasping, crawling and making repetitive hand movement in the performance of daily duties.  The position also requires repetitive hand movement and fine coordination in preparing reports using a computer keyboard.  Additionally, the position requires both near and far vision in reading written reports and work related documents. Acute hearing is required when providing phone and personal service.  Additionally, the incumbent in this position works outdoors in all weather conditions, including wet, hot and cold.  The position entails working in situations that may expose the employee to fumes or airborne particles, electrical shock or mechanical hazards.  The nature of the work also requires the incumbent to drive motorized vehicles. The need to lift, drag and push files, paper and documents weighing up to 25 pounds is also required.

KNOWLEDGE/SKILLS/ABILITIES

The following are a representative sample of the KSA’s necessary to perform essential duties of the position.

Knowledge of: Principles, procedures, practices and standards of municipal civil engineering; surveying methods and techniques; strength of materials and stress analysis; municipal engineering laws, ordinances, codes, specifications and plans; engineering project inspection methods; modern developments, current literature and sources of information regarding engineering; principles and practices of contract administration; operational characteristics and use of standard equipment used in the engineering profession; methods and techniques of supervision, training and motivation; basic principles of mathematics; applicable federal, state and local laws, codes, and regulations including City, county and state building codes; methods and techniques of scheduling work assignments; standard office procedures, practices and equipment; modern office equipment including a computer and applicable software; methods and techniques for record keeping and report preparation and writing; proper English, spelling and grammar; occupational hazards and standard safety practices.

Ability to: Perform complex engineering computations; check, design and supervise the preparation of engineering plans and studies; plan, organize, direct and evaluate the effectiveness of assigned program activities; effectively exercise supervisory control over complex professional and technical tasks; negotiate and manage construction contracts; perform the full range of professional civil engineering tasks; prepare and administer a budget; safely and effectively operate engineering tools and equipment; interpret, explain and apply applicable laws, codes and regulations pertaining to municipal public works design and construction; make adjustments to standard operating procedures to improve effectiveness and comply with regulatory changes as appropriate; read, interpret and record data accurately; organize, prioritize and follow-up on work assignments; work independently and as part of a team; make sound decisions within established guidelines; analyze a complex issue, and develop and implement an appropriate response; follow written and oral directions; promote and observe safety principles and work in a safe manner; communicate clearly and concisely, both orally and in writing; establish and maintain effective working relationships.

Skill to: Operate an office computer and a variety of word processing and software applications, including graphic and presentation programs. 

THE SELECTION PROCESS

The process may include an in-basket exercise, individual interviews, panel interviews and/or other related components.  Only those candidates who have the best combination of qualifications in relation to the requirements and duties of the position will continue in the selection process. The candidate selected for the position will be required to complete a background check including reference checks, fingerprint check, medical exam, drug-screening and/or other related components.

Human Resources will make reasonable efforts in the examination process to accommodate persons with disabilities. Please advise Human Resources of any special needs a minimum of five days in advance of the selection process exam by calling (916) 434-3229 or emailing hr@lincolnca.gov. The City of Lincoln is an Equal Opportunity Employer.

The information contained herein is subject to change and does not constitute either an expressed or implied contract.

DEADLINE TO APPLY: Open Until Filled

The City of Hayward is seeking a Senior Utilities Engineer with a water and/or wastewater background to supervise, direct, plan, and coordinate the activities of the Utilities Division. The Senior Utilities Engineer is a mid-management level position that performs, oversees, and directs engineering activities including planning, conceptual design, final design, cost estimating, project bidding, services during construction and construction management for a variety of projects in wastewater treatment, water storage and distribution, sewer collection, and storm water management. The ideal candidate will possess in-depth knowledge of wastewater treatment and related water/wastewater infrastructure projects. This position will serve as a key member of the team that will manage and deliver a $100 million treatment system upgrade for the City’s Water Pollution Control Facility (WPCF) to incorporate nutrient removal into the treatment process.  
 
DEFINITION
Under general direction, supervise, direct, plan, and coordinate the assigned functions and activities of the Engineering Section of the Utilities Division.
 
DISTINGUISHING CHARACTERISTICS
This is a mid-management level position that performs, oversees, and directs all assigned activities of the Utilities engineering section, including planning, conceptual design, final design, cost estimating, project bidding process, services during construction and construction management for variety of projects in water distribution, sewer collection, storm water management, and wastewater treatment.  This position is distinguished from that of subordinate Associate Civil Engineer position by its responsibility for the supervision of assigned engineering and technical staff, in addition to engineering and technical responsibilities for project development, design, and construction management for more complex projects.  This position is distinguished from Deputy Director of Public Works for Utilities by the latter position's overall responsibility for all aspects of the Utilities Division functions.
 
 

• Principles and practices of civil engineering.
• Familiarity with applicable laws and regulatory codes relevant to planning, design and construction of water, wastewater, and storm drainage projects.
• Current developments, literature, and sources of information relative to municipal utilities engineering.
• Modern methods and techniques used in the design and construction of a wide variety of utilities engineering projects.
• Group and interpersonal dynamics.
• Principles of management and supervision including work planning, direction, training and evaluation of work and staff performance. 
• Asset management.
• Geographic Information Systems (GIS). 

• Supervise, train and evaluate professional and technical subordinates.
• Set priorities, organize projects and meet deadlines and budget constraints.
• Perform complex engineering computations and design, check, and supervise the construction of a wide variety of municipal utilities facilities.
• Communicate both orally and in writing to prepare clear and accurate reports, lead discussions, and present information to City staff, contractors, and the general public.
• Complete assignments in a timely manner with minimum supervision.
• Plan and direct the work of other personnel.
• Develop and maintain effective working relationships with individuals and groups.
• Resolve utilities related construction problems in the field.

EXPERIENCE AND EDUCATION

Any combination equivalent to experience and education that could likely provide the required knowledge and abilities would be qualifying.  A typical way to obtain knowledge and abilities would be:
 
Experience:  Four (4) years of progressively responsible experience in professional engineering work in the design and construction of water and wastewater projects including one (1) year of supervisory or lead experience.
 
Education:   Bachelor's degree or equivalent from an accredited college or university in civil engineering, or a closely related field with major work in civil engineering.  A master's degree is desirable.
 
Licenses and Certificates: Possession and maintenance of a certificate of registration as a Professional Engineer (Civil or Mechanical) in the State of California.
 
Possession and maintenance of a valid Class C California driver's license.

SELECTION PROCEDURE

Candidates are encouraged to apply online at www.hayward-ca.gov under the Current Vacancies tab or at www.GovernmentJobs.com.  Paper applications can be obtained by visiting the Human Resources Department at Hayward City Hall located at 777 B Street, Hayward, CA  94541.  Office hours are Monday through Friday, 8 a.m. to 5 p.m. 

Apply prior to the closing time of the job announcement and allow at least one (1) hour to submit your application if you are a new user to the system.  Our on-line application system is provided by Government Jobs. If you have problems while applying online, please contact the Government Jobs Help Desk at (855) 524-5627.
 

                                                 The City of Hayward is an Equal Opportunity Employer

This recruitment is open until filled. Applications will be reviewed on a bi-weekly basis. The first review of applications will be on February 19, 2024. If you are interested in applying you are encouraged to apply as soon as possible, before the position is closed.    

DESCRIPTION:
Silicon Valley Power, Maps & Records department has an excellent opportunity for the position of Engineering Aide (Electric). Job responsibilities include, prepares scaled and dimensioned plans based on sketches prepared by engineering estimating personnel, maintains records of as-builts and updates existing SVP maps and records utilizing ESRI-based GIS applications, Maintains master map files, including such records of block maps, street light maps, fiber communication, electric utility single line and operating diagrams and other maps, Performs computing and drafting operations in AutoCAD, involved in checking drawings of electric utility facilities, perform other duties as assigned. 

 

THIS RECRUITMENT MAY BE USED TO FILL MULTIPLE POSITIONS IN THIS, OR OTHER DIVISIONS OR DEPARTMENTS BESIDES THE POSITIONS LISTED BELOW.  IF YOU ARE INTERESTED IN EMPLOYMENT IN THIS CLASSIFICATION, YOU SHOULD APPLY TO ENSURE YOU ARE CONSIDERED FOR ADDITIONAL OPPORTUNITIES THAT MAY UTILIZE THE APPLICANTS FROM THIS RECRUITMENT. MEETING THE MINIMUM QUALIFICATIONS DOES NOT GUARANTEE ADMITTANCE INTO THE EXAMINATION PROCESS.  ONLY THE MOST QUALIFIED CANDIDATES WHO DEMONSTRATE THE BEST COMBINATION OF QUALIFICATIONS IN RELATION TO THE REQUIREMENTS AND DUTIES OF THE POSITION WILL BE INVITED TO TEST OR INTERVIEW. 

The annual salary range for this position is $78,246.00 - $100,037.52. This position will be filled at or near the bottom of the salary range. 

Typical Duties

Duties may include, but are not limited to, the following:
 
Under general supervision:
• Participates in field survey activities such as assisting with measuring and recording distances and elevation using Global Positioning System (GPS) equipment
• Prepares maps and drawings using geographic information system (GIS) tools to place symbols and apply color codes for the identification of facilities
• Receives, reviews, provides comments, files, and returns maps, documents, and plans using AUTOCAD
• Performs scaling and dimensioning to verify the accuracy of maps and plans
• Assists in conducting field inventory of existing primary and secondary conductors, transformers, switches, poles, pole attachments, manholes, and conduit locations
• Draws and updates electrical schematic diagrams, panel wiring diagrams, substation layout drawings using AUTOCAD, and organizes associated documentation
• Prepares scaled and dimensioned plans, using AUTOCAD based on sketches prepared by engineering/estimating personnel
• Operates a computer and standard office plotting/copying equipment
• Conducts records research including job files, property ownership, easement and right-of-way records
• Maintains records of equipment databases, log books, and map inventories
• Operates passenger vehicles requiring Class C driver's license
• Orders office drafting supplies, manages outside reproduction services, and coordinates vendor services for office drafting equipment maintenance
• Performs other related duties as assigned

Minimum Qualifications

EDUCATION AND EXPERIENCE
Minimum Qualifications:
• Graduation from an accredited junior college with an Associate of Arts degree or higher in engineering or its equivalent, including satisfactory completion of college level courses in writing, mathematics, engineering and related courses; and
• One (1) year working with geographic information system (GIS) tools and systems or one (1) year working with computer-aided drafting (AUTOCAD).
 
Desirable Qualifications:
• One year (1) experience working with computer-aided drafting (AUTOCAD) and one year (1) experience working with geographic information system (GIS).
• Completion of courses in GIS and AUTOCAD.
 
Possible Substitutions:
• Three (3) years of work experience performing mapping/drafting activities of electric utility facilities, involving the use of CAD and GIS systems and tools may substitute for the required education and experience.
 
LICENSE
Possession of a valid California Class C driver's license is required at the time of appointment and for the duration of employment.
 
OTHER REQUIREMENTS
• Employees are required to pass initial and periodic comprehensive background checks, which may include fingerprinting, to meet Federal, State and/or industry security requirements.
• Must be able to perform all the essential functions of the job assignment.

Candidates must attain a passing score on each phase of the examination process to qualify for the Eligible List. A department interview will be required prior to appointment.

Federal law requires all employees to provide verification of their eligibility to work in this country. Please be informed that the City of Santa Clara will not sponsor, represent, or sign documents related to visa applications/transfers for H1B or any other type of visa which requires an employer application.  

VETERAN’S PREFERENCE POINTS: This position qualifies for Veteran’s Preference Points.  Applicants who have separated from service (Active Duty Status) must submit proof of honorable discharge (Form DD214) with their application at time of filing or will be ineligible to have points added to their final score.

Knowledge, Skills, and Abilities

Knowledge of: 
• General principles of algebra, geometry, trigonometry, and mechanical drawing
• Principles and practices of engineering drafting and basic graphic design
• Standard personal computer hardware and software, including word processing, spreadsheet, and database programs
• Document control, retrieval, and filing systems
 
Ability to:
• Prepare neat and accurate drawings, diagrams, dimensions, representations, and schematics using GIS and CAD tools
• Select and use appropriate drafting, and duplicating equipment and materials
• Read, interpret and apply engineering terminology and symbols
• Retrieve, file, and code drawings and diagrams and prepare brief reports
• Maintain organized and complete records
• Utilize ESRI Geographic Information Systems (GIS)
• Utilize AutoDesk AutoCAD software applications
• Communicate effectively, both orally and in writing
• Understand and comprehend oral and written directions and instructions
• Effectively handle multiple priorities, organize workload, and meet strict deadlines
• Establish and maintain effective working relationships with those contacted in the course of work, including the general public
• Work in a team based environment and achieve common goals
• Deal tactfully and courteously with others
• Walk, sit, or stand for extended periods of time
• Perform moderate physical labor including bending, stooping, crawling, climbing, and lifting as necessary to perform assigned duties.
 
 
Additional Information: 
You must answer all job-specific questions in order to be considered for this vacancy or your application will be deemed incomplete and withheld from further consideration. Applications must be filled out completely (i.e. do not write “see resume or personnel file.”). To receive consideration for the screening process, candidates must submit a 1) Cover Letter and, 2) Resume. Incomplete applications will not be accepted. Application packets may be submitted online through the “Apply Now” feature on the job announcement at www.santaclaraca.gov. This recruitment is open until filled and applications will be screened every 2-3 weeks. The first review of applications will be on February 19, 2024.  
 
The City of Santa Clara is an equal opportunity employer. Applicants for all job openings will be considered without regard to age, race, color, religion, sex, national origin, sexual orientation, disability, veteran status or any other consideration made unlawful under any federal, state or local laws. The City of Santa Clara is committed to offering reasonable accommodations to job applicants with disabilities. If you need assistance or an accommodation due to a disability, please contact us at (408) 615-2080 or HumanResources@santaclaraca.gov.

The Department: 
 
As a community owned, not for profit municipal electric utility, Silicon Valley Power (SVP) has provided dependable electric service for over 125 years. SVP is the only full service, vertically integrated publicly owned utility in Silicon Valley owning generation, transmission and distribution assets.  As a Public Electric Utility, Santa Clara’s Silicon Valley Power is not driven by profits, as reflected in its significantly lower utility rates when compared to other private sector utilities. Silicon Valley Power is community and policy driven, which is reflected in the many green policies that it promotes, reduced rates and its strategic plan. Silicon Valley Power is one of few public electric utilities in California with an upward trajectory of growth.
 
Today, SVP owns, operates and participates in more than 1,200 MW of electric generating resources and serves a peak load of approximately 700 MW. SVP's expansion plan will double our system capacity over the next ten years. This includes over 30 strategic initiatives in four distinct areas: Utility Performance Excellence, Customer Engagement and Satisfaction, Progress and Innovation Focus, and Community and Environmental Stewardship. High-profile customers include large corporations such as Intel, Applied Materials, Amazon Web Services (AWS), and NVIDIA.
 
The Position: 
 
This is a professional position in the unclassified service, responsible for managing the one or more of the Engineering Divisions of the Electric Department relating to transmission planning, distribution engineering, capital improvement project delivery (design & construction), system expansion program, and environmental compliance.  The position requires a demonstrated ability to work well with management, professional and administrative support employees in the Department and with customers, professionals, managers and all City Departments. 
 

MEETING THE MINIMUM QUALIFICATIONS DOES NOT GUARANTEE ADMITTANCE INTO THE EXAMINATION PROCESS.  ONLY THE MOST QUALIFIED CANDIDATES WHO DEMONSTRATE THE BEST COMBINATION OF QUALIFICATIONS IN RELATION TO THE REQUIREMENTS AND DUTIES OF THE POSITION WILL BE INVITED TO TEST OR INTERVIEW. 

Typical Duties

Duties include but are not limited to the following:

Under general direction: 
• Plan, develop, coordinate, perform, and direct the activities of the Engineering Division of the Electric Utility Department;
• Provide management and supervision for all activities of Engineering in the planning, engineering and design of individual system extensions, revisions and improvements;
• Provide recommendations on a broad spectrum of division-related issues;
• Manage assigned staff, provide technical instructions and assistance as necessary; develop, perform and manage the implementation of utility plans based upon applicable State and Federal laws;
• May be responsible for directing the activities of consultants and contractors;
• Attend meetings and work with engineers, contractors, specialists and City staff to ensure that City guidelines are met in the determination of requirements of projects;
• Represent the City at industry meetings, management groups, professional organizations, and other meetings;
• Make periodic and special reports, which describe the current Engineering Division activities and conduct special studies and prepare reports, including findings and recommendations, as required;
• Direct or conduct studies and analysis related to the reliability of the electric system to ensure compliance with appropriate Federal Energy Regulatory Commission/North American Electric Reliability Corporation (FERC/NERC) and industry reliability standards;
• Prepare or direct the preparation of purchase specifications required to implement Electric Utility Department purchases in connection with system expansion and improvements;
• Conduct review and analysis of new equipment, methods and materials pertinent to the design, construction, operation and maintenance of the electric system, and make recommendations to appropriate Managers;
• Confer with and assist the Director of Electric Utility in the development of long-range plans, goals and objectives, and budgets;
• Manage, schedule and evaluate the work of Engineering Division staff, and develop processes designed to support a continuous learning environment;
• Analyze Engineering Division operations to determine the most efficient and effective assignment of staff;
• Prepare the Engineering Division budget, recommend allocation of division funds within guidelines; monitor expenditures to ensure adherence to the approved budget, manage contractual services;
• Administer and assist in the staffing, administrative and financial matters of the Engineering Division; and
• Perform other related duties as assigned. 

Minimum Qualifications

EDUCATION AND EXPERIENCE
• Education or experience equivalent to graduation from an accredited college or university with a bachelor's degree in electrical engineering or closely related field; and
• Four (4) years experience at a responsible level in engineering in the electric utility industry or closely related field is required. 

DESIRABLE EXPERIENCE
• One (1) year of experience managing staff, and with responsibility for division budget planning and administration is desirable.

DESIRABLE QUALIFICATIONS
• Possession of a certificate of registration as a Professional Engineer in the State of California is desirable.

POSSIBLE SUBSTITUTION
• Possession of a valid certificate of registration as an Electrical Engineer issued by the California State Board of Registration for Civil and Professional Engineers may be substituted in lieu of a bachelor’s degree in electrical engineering or closely related field.

Knowledge, Skills, and Abilities

Knowledge of:
• Principles of electrical utility planning and engineering involved in the development, construction, production, operational methods in interconnected utility areas, principles of program evaluation, forecasting and planning, probability and energy analysis and formulation; customer service; telecommunications and controls; and information technology;
• Principles of engineering economics, statistical analysis and forecasting;
• Principles of management, supervision, personnel administration, training and performance evaluation;
• Principles of organization and management, effective leadership and municipal budgeting and administration;
• Regulatory laws, standards and requirements including FERC/NERC Reliability Standards;
• Research methods and statistical analysis;
• Problem solving and conflict resolution practices and techniques;
• Complex spreadsheets and database applications;
• Preparation and administration of contracts and fiscal planning;
• Project and workload planning; and
• Environmental and safety practices, procedures and standards.

Ability to:
• Analyze complex data; resolve applicable problems; evaluate alternatives and recommend an appropriate course of action;
• Effectively negotiate contracts and customer business relations;
• Manage contractor activities;
• Manage project development and operations management;
• Identify, research and gather relevant information from a variety of sources;
• Exercise sound and independent judgment, conduct independent analyses and make recommendations on difficult and sensitive issues;
• Anticipate potential problems, develop contingency plans when needed and solve concurrent problems;
• Provide the leadership and management of the division through coaching, empowering and facilitating employees working in a team environment;
• Create a culture that is conducive to change and one that is able to select, recruit, retain, develop and motivate a skilled and talented workforce where everyone knows their mission, role, and job expectations;
• Establish clear goals and objectives in order to create an organization that delivers excellent customer service through ethical leadership standards, and establishes an atmosphere of respect for employees consistent with the City’s Code of Ethics and Values;
• Build constructive relationships by promoting collaborative partnerships with department peers, bargaining units, employees, citizens, and others contacted in the course of work;
• Represent and speak for the department and its work, e.g., presenting, explaining, promoting, defining, and negotiating to those within and outside the department by making clear and convincing oral presentations to individuals and groups, by listening effectively and clarifying information and by facilitating an open exchange of ideas;
• Prepare and present highly technical and complex written and oral reports using multi-media to large groups and City staff;
• Work effectively as a member of the department’s management team to achieve common goals and be able to deliver excellent customer service to both internal and external City clients;
• Plan, organize, direct, and coordinate organization activities and effectively manage the work of Engineering Division staff;
• Work effectively and coordinate multiple projects and complex tasks simultaneously in time-sensitive situations and meet deadlines;
• Communicate logically and clearly, both orally and in writing; follow oral and written instructions;
• Understand and carry out highly complex technical tasks;
• Use computer applications to prepare memos and procedural documentation;
• Create, manage and maintain complex filing and record systems;
• Walk or stand for extended periods of time and bend, stoop, crawl, climb, lift or any other physical requirement as necessitated by the position to perform assigned duties.