Search Jobs

The City of Newark is looking for General Laborer to be an integral member of the Maintenance Division within the Public Works Department. Under supervision the incumbent will perform tasks to include general cleaning and maintenance of city parks to include planting of trees, shrubs, pruning, fertilizing and watering, mowing and edging turf areas, as well as trash removal from parks, roadways, and medians. This active laborer will remove graffiti, install signage, and assist in the cleaning of storm drains.

Experience and Training 
Any combination of experience and training that would provide the required knowledge, skills and abilities is qualifying.  A typical way to obtain the required knowledge and abilities would be:

Education:

• Possession of a high school diploma or equivalent.

Experience:

• No experience is required; some landscaping, general maintenance, or construction experience is preferred.

License:

• Possession of a valid California Class C driver license is required.

The Town of Hillsborough is recruiting for Maintenance Workers I and II, depending on ability.

Salary range for MWI is $6,099.95 - $7,397.41 monthly

Salary range for MWII is $6,711.18 - $8,154.16 monthly

Opportunity for additional incentive pay for certifications and a commercial license.

 

Job Description:

Definition

Under direction (I) or general (II) supervision, performs a variety of work in the construction, repair, maintenance, and replacement of Town infrastructure, including water, sewer, streets, parks, facilities, and drainage facilities and systems; uses and operates a variety of tools and light to heavy equipment; and performs related duties as assigned.

 

SUPERVISION RECEIVED AND EXERCISED

Receives direction (Maintenance Worker I) or general supervision (Maintenance Worker II) from assigned Public Works Supervisor.  Exercises no direct supervision over staff.

Class Characteristics

Maintenance Worker I: This is the entry-level classification in the Maintenance Worker series.  Initially under direction, incumbents learn Town infrastructure and use of tools and equipment.  As experience is gained, assignments become more varied, complex, and difficult; direction and frequent review of work lessen as an incumbent demonstrates skill to perform the work independently.  Positions at this level usually perform most of the duties required of the positions at the Maintenance Worker II level but are not expected to function at the same skill level and usually exercise less independent discretion and judgment in matters related to work procedures and methods.  Work is usually supervised while in progress and fits an established structure or pattern.  Exceptions or changes in procedures are explained in detail as they arise.

Maintenance Worker II: This is the fully qualified journey-level classification in the Maintenance Worker series.  Positions at this level are distinguished from the Maintenance Worker I by the performance of the full range of duties as assigned, working independently, and exercising judgment and initiative.  Positions at this level receive only occasional instruction or assistance as new or unusual situations arise and are fully aware of the operating procedures and policies of the work unit.  This class is distinguished from the Lead Maintenance Worker in that the latter is responsible for providing technical and functional direction to lower-level maintenance staff and performs the most complex duties assigned to the series.

Positions in the Maintenance Worker class series are flexibly staffed; positions at the II-level are normally filled by advancement from the I-level; progression to the II-level is dependent on (i) management affirmation that the position is performing the full range of duties assigned to the classification; (ii) satisfactory work performance; (iii) the incumbent meeting the minimum qualifications for the classification including any licenses and certifications; and (iv) management approval for progression to the Maintenance Worker II-level.

 

Examples of typical JOB FUNCTIONS (Illustrative Only)

Management reserves the right to add, modify, change, or rescind the work assignments of different positions and to make reasonable accommodations so that qualified employees can perform the essential functions of the job.

Positions at the Maintenance Worker I level may perform some of these duties and responsibilities in a learning capacity.

• Inspects assigned Town infrastructure for safety issues, structural integrity, and possible future work projects and programs, and appropriately marks areas that need to be repaired.
• Operates and maintains hand and power tools, vehicles, and a variety of light, medium, and heavy equipment related to the construction, maintenance, and repair of Town infrastructure.
• Observes safe work methods and makes appropriate use of related safety equipment as required.
• Maintains work areas in a clean and orderly condition, including securing equipment at the close of the workday.
• Installs street barricades and cones and controls traffic around work sites and special events to ensure safe conditions for the general public and Town staff.
• Provides needed information and demonstrations concerning how to perform certain work tasks to new employees in the same or similar class of positions.
• Maintains accurate logs and records of work performed and materials and equipment used.
• Receives and responds to service calls and resident complaints; investigates resident issues and complaints; resolves or refers issues to supervisor.
• Responds to after-hour emergencies.
• May locate underground utilities as part of Underground Service Alert (USA) to inform contractors, agencies, and Town employees doing construction, excavation, or digging work.
• Performs related duties as assigned.

In addition, when assigned to the Water Division:

• Performs construction, maintenance, and repair activities of Town water utilities systems, including; repairs concrete including sidewalk panels and temporary street patches.
• Performs water valve maintenance, including locating and raising unexposed valves, operating automated machines to exercise valves on an annual basis, and updating records following the installation of new valves.
• Flushes water mains to ensure water quality meets California State Water Resources Control Board standards.
• Performs water meter maintenance, including installing new meters, testing and repairing meters of various sizes, repairing leaks, and replacing meters as necessary; installs service lines for newly developed properties and accounts for the installation of meters for new homes; performs shut-downs of services, as required.
• Collects and tests samples, following established protocols, from sampling stations located throughout water distribution system to measure system performance and to ensure compliance with water quality standards; schedules testing and sampling conducted by external agencies for compliance and reporting purposes.
• Operates and monitors the Supervisory Control and Data Acquisition (SCADA) system; assists with maintaining water flow and levels throughout the system.

In addition, when assigned to the Sewer Division:

• Performs inspection, construction, maintenance, and repair activities of sewer collection systems; inspects and maintains pump stations.
• Cleans sanitary sewer lines in the collection system by means of hydro-cleaning, flushing, vacuuming, and rodding.
• Coordinates the and/or performs the inspection of underground sewer collection pipes, lateral connections, and associated appurtenances using closed-circuit television equipment.

In addition, when assigned to the Streets and Storm Division:

• Performs construction, maintenance, and repair activities of Town streets, roadways, curbs, sidewalks, and drainage infrastructure; maintains and repairs asphalt pavement, concrete, traffic and street signs, and pavement markings.
• Inspects, cleans, maintains, and repairs storm drains and catch basins.
• Trims and prunes bushes, trees, and shrubs and removes weeds to provide clearance of roadways, easements, sidewalks, and signs.
• Performs street sweeping duties and other cleaning activities on public sidewalks, streets, parking lots, roadways, parks, Town Hall, and town-owned facilities.

 

Qualifications

Positions at the Maintenance Worker I level may exercise some of these knowledge and abilities statements in a learning capacity.

Knowledge of:

• Principles, practices, tools, and materials as they relate to the maintenance and repair of infrastructure, facilities, and systems similar to those in a municipal environment.
• Operational characteristics and minor maintenance of a variety of hand and power tools, vehicles, and light to heavy power equipment used in public works operations.
• Occupational hazards and safety equipment and practices related to the work, including driving rules and practices, traffic control procedures and regulations, and confined space entry.
• Applicable federal, state, and local laws, rules, regulations, ordinances, and organizational policies and procedures relevant to assigned area of responsibility.
• Basic mathematics.
• Record keeping principles and procedures.
• Techniques for providing a high level of customer service by effectively dealing with the public, vendors, contractors, and Town staff.
• The structure and content of the English language, including the meaning and spelling of words, rules of composition, and grammar.
• Modern equipment and communication tools used for business functions and program, project, and task coordination, including computers, handheld devices, and software programs relevant to work performed.

Ability to:

• Perform construction, modification, maintenance, and repair work of Town infrastructure including water, sewer, streets, and drainage facilities and systems.
• Interpret and apply the policies, procedures, laws, codes, and regulations pertaining to assigned programs and functions.
• Set up and operate traffic area construction zones, including cones, barricades, and flagging.
• Read, interpret, and apply technical information from manuals, drawings, specifications, layouts, blueprints, and schematics.
• Follow department policies and procedures related to assigned duties.
• Make accurate arithmetic calculations.
• Safely and effectively use, operate, and maintain hand and power tools, vehicles, and a variety of light, medium, and heavy equipment related to the construction, maintenance, and repair of Town infrastructure.
• Maintain accurate logs, records, and basic records of work performed.
• Organize work, set priorities, meet critical deadlines, and follow-up on assignments.
• Use tact, initiative, prudence, and independent judgment within general policy, procedural, and legal guidelines.
• Effectively use computer systems, software applications relevant to work performed, and modern business equipment to perform a variety of work tasks.
• Communicate clearly and concisely, both orally and in writing, using appropriate English grammar and syntax.

Education and Experience:

Any combination of training and experience that would provide the required knowledge, skills, and abilities is qualifying.  A typical way to obtain the required qualifications would be:

Maintenance Worker I/II: Equivalent to completion of the twelfth (12th) grade.

Maintenance Worker I: No previous work experience is required.  Previous experience in the field of maintenance or construction is highly desirable.

Maintenance Worker II: Two (2) years of experience in construction, maintenance, and/or repair of utilities, streets and roadways, traffic signs, and/or related facilities, systems, and appurtenances equivalent to that of a Maintenance Worker I with the Town.

Licenses and Certifications:

Maintenance Worker I/II:

• Possession of, or ability to obtain, a valid California Driver’s License by time of appointment.
• Possession of, or ability to obtain, a valid Grade I (D1) Water Distribution Operator Certificate issued by California State Water Resources Control Board or Grade I Collections System Maintenance certificate issued by California Water Environment Association (CWEA) within twelve (12) months of appointment.
• Possession of, or ability to obtain, a valid Class A California Driver’s License with Tanker Endorsement is highly desirable within 24 months of hire.

Physical Demands

Must possess mobility to work in the field; strength, stamina, and mobility to perform medium to heavy physical work; to sit, stand, and walk on level, uneven, or slippery surfaces; frequently reach, twist, turn, kneel, bend, stoop, squat, crouch, grasp and make repetitive hand movement in the performance of daily duties; possible entry into confined spaces and the use of confined entry equipment, to climb and descend ladders, to operate varied hand and power tools and construction equipment, and to operate a motor vehicle and visit various Town sites; and vision to inspect and operate equipment.  The job involves fieldwork requiring frequent walking in operational areas to identify problems or hazards.  Finger dexterity is needed to operate and repair tools and equipment.  Employees must possess the ability to lift, carry, push, and pull materials and objects averaging a weight of 50 pounds or heavier weights, in all cases with the use of proper equipment and/or assistance from other staff.  

Environmental Elements

Employees work in the field and are exposed to loud noise levels, cold and hot temperatures, inclement weather conditions, road hazards, vibration, confining workspace, chemicals, mechanical and/or electrical hazards, hazardous physical substances and fumes, dust and air contaminants.

 

The Department of Public Works is seeking well-qualified candidates for the position of Stationary Engineer II.

 

About the Department
The Department of Public Works plans, designs, constructs, operates, and maintains facilities and equipment that are safe and accessible to the clients of County agencies, the general public, and County employees. The Department advises the Board of Supervisors on all public works issues, including rates and charges for services that are fair to both the users and service providers.

Public Works has a budget of approximately $200 million and is comprised of over 300 employees in four divisions: Administrative Services and Airports, Engineering and Resource Protection, Facility and Capital Projects, and Road Services.

Facilities Maintenance & Operations
FM&O, short for Facilities Maintenance & Operations, ensures County facilities are safe, comfortable, and clean. From historic landmarks to modern offices, we keep things running smoothly.

The FM&O Stationary Engineers perform maintenance and repairs to the various plumbing, mechanical, and lighting systems throughout County facilities. These include boilers, chillers, pumps, motors, lamps, ballasts, drivers, toilets, sinks, and faucets as well as utilizing the lighting and building control systems to schedule and adjust run times of the various pieces of equipment. There are multiple Stationary Engineer I/II vacancies in FM&O.

Our team turns the screws, tightens the bolts, hammers the nails, paints the walls, and types in the codes to keep all the buildings and their systems working. If it's loose, stuck, hot, cold, light, or dark FM&O gets the call. Whatever it takes, our team does it with professionalism, care, and heart!

The Position
Under the direction of a Supervising Stationary Engineer, Stationary Engineers are responsible for a wide variety of repair and maintenance work in the areas of HVAC, electrical, plumbing, refrigeration, emergency power systems, water treatment systems, boiler equipment, and piping repair, building automation systems, and miscellaneous equipment repair. Stationary Engineer II is a journey-level classification, and incumbents are expected to have proficiency, perform independently, and solve complex problems in all of the areas listed above.

There are multiple vacancies to be filled throughout the Department. Work locations will include Redwood City Government Center, San Mateo Medical Center, Youth Services Center, and Maple Street Correctional Facility.
Candidates hired as Stationary Engineers must be willing to work evenings, weekends, and alternate shifts. They must also successfully obtain and maintain a Sheriff's Office security clearance as a condition of employment. 

The ideal candidates for these positions will have:

• At least three years of journey-level experience as a Stationary Engineer.
• A minimum of three years of journey-level experience in mechanical, electrical, and plumbing systems.
• Extensive knowledge and experience working with boiler and HVAC systems.
• Proficiency in a wide variety of installations and repairs on plumbing, gas system piping, chiller/boiler piping, and wastewater systems, including the ability to operate a large sewer snake.
• Certification as a Backflow Prevention Tester.
• Experience in energy management and computer-controlled systems.
• The ability to troubleshoot, repair, and maintain a variety of equipment, including air conditioning, electric motors, heating units, heat pumps, light commercial furnaces, burners, fresh air and exhaust fans, economizers, and humidifiers.
• Experience with Fire Alarm testing, troubleshooting, and NFPA codes.
• Experience in a hospital or healthcare setting.

 

 

Examples Of Duties:

Duties may include, but are not limited to, the following:

• Operate, maintain, install, and repair electrical, refrigeration, plumbing, heating, air conditioning, and ventilating systems.
• Operate, maintain, and repair boiler equipment.
• Repair and replace pipes, fittings, and other equipment used in plumbing, gas, and steam systems.
• Repair electrical equipment, including lamps, fixtures, and switches; adjust electrical controls, motors, and auxiliary equipment up to 480 volts.
• Test, operate, maintain, and repair emergency power systems, including UPS, emergency generators, and associated equipment.
• Use hand and power tools, including cutting and threading tools, grinders, reamers, wrenches, welders, saws, and other special tools.
• Make minor carpentry repairs to doors, windows, floors, and other parts of buildings.
• Do touch-up painting on repaired equipment.
• Remove or arrange for the removal of trash, pests, and other hazardous materials or debris in the course of performing work. 
• Properly place, set, and inspect traps, and collect and remove insects and pests.
• Reclaim or recycle refrigerant using Freon recovery systems.
• Operate water treatment facility, including wastewater and potable water.
• Adjust and calibrate boiler burners and controls.
• Adjust and calibrate chiller controls.
• Test, calibrate, and repair backflow devices.
• Calibrate HVAC controls and associated equipment.
• Monitor building management systems.
• Replace pumps and pump seals, and repair and replace motor valves.
• Repair and replace air conditioning units.
• Troubleshoot HVAC, plumbing, electrical, and energy power systems.
• Conduct preventative maintenance.
• Understand fire alarm systems.
• Repair and install chemical monitoring stations.
• Repair, test, and record data on generators.

If designated as the certified water treatment operator:

• Operate water treatment facility, including wastewater and potable water, consistent with performance standards, federal and state regulations, and variable operating conditions and emergencies.
• Make periodic inspections and reports of facility conditions to ensure adherence to maintenance procedures.
• Perform water sampling in coordination with the health laboratory.
• Maintain logs of facility operations, test results, scheduled maintenance, and other operating conditions.
• Control filter operations.
• Coordinate special projects related to water treatment and distribution, in close coordination with supervisor/manager.
• Troubleshoot complex technical problems related to water treatment and develop recommendations to improve water quality standards, facility effectiveness, and efficiency.
• Perform quality analysis of raw and treated water.
• Compile data concerning flows, chemical dosages, levels, pressure, volume, water quality, and other operational information.
• Prepare reports.

 

Qualifications:

Education and Experience:
Any combination of education and experience that would likely provide the required knowledge, skills and abilities is qualifying.  
 

• Completion of courses related to maintenance, installation, and repair of electrical, HVAC, plumbing, refrigeration, and power equipment.
• Two years of journey-level experience as a stationary engineer or equivalent, AND demonstrated experience in maintaining, installing, and repairing electrical, HVAC, plumbing, refrigeration, and power equipment in a large building, plant, or vessel.
• Two years of experience can be substituted with the completion of an apprenticeship program.

Licensure/Certification:

• Must obtain and maintain Sheriff's Office security clearance.
• Universal Certification in Freon recovery upon hire.
• Obtain Backflow Certification within six months of hire and maintain certification.
• If designated as the water treatment operator, possession of or ability to obtain a valid Grade II Water Treatment Operator Certification issued by the State of California within six months of employment is required.

Knowledge of:

• Common safety practices in the workplace.
• Heating and electrical equipment.
• Principles and techniques used in stationary engineering.
• Proper and safe use of basic hand tools.
• Basic arithmetic for measuring, calibrating, and estimating.
• Steam and gas fired heating systems; refrigeration equipment; ventilating and air-conditioning equipment.
• Electrical, plumbing and refrigeration systems.
• Controls and control systems.
• Emergency power systems, generators, and associated equipment.
• Freon recovery procedures and equipment, if at Level II.
• Water treatment systems and operations, principles and practices, and regulatory mandates, if designated as certified water treatment operator.
• Safety rules, regulations, and work practices, including reference to hazardous chemicals.
• Basic record-keeping principles and practices.

Skill/Ability to:

• Follow safety practices.
• Troubleshoot and/or repair, replace, regulate and control electrical, refrigeration, plumbing, heating, air conditioning, and ventilating systems.
• Determine and estimate materials required for a job and prepare requisitions.
• Use hand and power tools.
• Make metal parts and equipment.
• Perform minor carpentry and painting tasks.
• Follow oral and written instructions.
• Communicate effectively, courteously, and professionally with customers and others.
• Read and interpret plans.
• Prepare and maintain accurate maintenance records.
• Operate standard office equipment, computers, and timekeeping systems.
• Lift and carry materials, supplies, and equipment; climb ladders; and crawl in tight spaces.
• Perform water treatment plan and distribution system operations and maintenance activities if at Level II and designated as water treatment operator. 

 

Application/Examination:

Open and Promotional. Anyone may apply. Current County of San Mateo employees with at least six months (1040 hours) of continuous service in classified regular, probationary, extra-help/limited term position prior to the final filing date will receive five points added to their final passing score on this examination. 
 
The examination process will consist of an Application Screening (weight: pass/fail), and an Interview (weight: 100%), which may include a performance exam. Depending on the number of applicants, an application appraisal of education and experience may be used in place of other examinations, or further evaluation of work experience may be conducted to group applicants by level of qualification. All applicants who meet the minimum qualifications are not guaranteed advancement through any subsequent phase of the examination. All examinations will be given in San Mateo County, California, and applicants must participate at their own expense. 

IMPORTANT:  Applications for this position will only be accepted online. If you are currently on the County's website, you may click the “Apply” button. If you are not on the County's website, please go to https://jobs.smcgov.org/ to apply. Responses to the Supplemental Questionnaire must be submitted in addition to the standard County employment application form. A resume will not be accepted as a substitute for the required application materials. Online applications must be received by the Human Resources Department before midnight on the final filing date.

This is a continuous recruitment which may close at any time. The final filing date will be posted five days in advance on this job announcement.

Apply immediately. This recruitment is open on a continuous basis, and selections may be made at any time within the process.

Tentative Recruitment Schedule: 
Round 1 of Screening: Week of January 5, 2026
Round 1 of Panel Interviews: Week of January 19, 2026 
Round 2 of Screening: Week of February 2, 2026
Round 2 of Panel Interviews: Week of February 16, 2026
Round 3 of Screening: Week of March 2, 2026
Round 3 of Panel Interviews: Week of March 16, 2026

The City of San Mateo Public Works Department is seeking a Traffic and Lighting Technician

 

The Department

The Public Works Department is comprised of the Engineering and Facilities Services Division (EFSD) and the Environmental Services Division (ESD). Each division is led by a Deputy Director reporting to the Director of Public Works. The department is responsible for the City’s major capital projects and infrastructure including streets, street lights, traffic signals, sewer and storm conveyance systems, wastewater treatment plant, pump stations, a major lagoon, and dams and levees. A key player on this team is the Traffic and Lighting Technician. You would be joining over 500 people whose mission is to serve the San Mateo community with a collaborative, innovative and professional spirit.

Look to some of the reasons why the City of San Mateo is a great place to work: https://www.youtube.com/watch?v=_GTIzeSpc_g

The Position

The Traffic and Lighting Technician performs skilled electrical and mechanical work in the maintenance and repair of traffic control signage, traffic signal equipment, and street lights; and guides the work of and trains other maintenance personnel, and performs related work as required.  Duties may include, but are not limited to, the following:

• Guide and participate in the work of other maintenance personnel.  Ability to set-up work zone safety and prepare traffic control work plans.
• Inspect, install, remove, and repair signal controls and auxiliary equipment such as light standards, control boxes, light fixtures, lamps, and circuitry; diagnose malfunctions; adjust and replace electronic and mechanical components.
• Inspect, install, remove and repair street lights and auxiliary equipment.
• Repair, replace or modify electric and electronic components, controllers, relays, switches, fuses, timers and other parts; design and construct special test equipment for shop testing of electronic components.
• Investigate complaints and reports of signal and traffic light malfunctions; adjust, repair or remove defective equipment; make field repairs of damaged equipment.
• Identify, locate and indicate with appropriate identification markers underground utilities (USA); respond to USA work orders within regulatory requirements; and document services accordingly.
• Be available for standby assignments in accordance with Department policies and procedures.
• Assist in the design of electrical circuits and systems for street lighting and traffic signals.
• Inspect the work of contractors during the course of construction and upon completion.
• Monitor traffic control computer and make adjustments as necessary.

The Traffic and Lighting Technician receives general direction from the Field Maintenance Manager and direct supervision from a Public Works Supervisor or higher level department staff and may exercise technical or functional direction over and provide work review to a Traffic Safety Worker or Maintenance Worker I/II.

For a complete list of duties, reference our job specifications at https://www.cityofsanmateo.org/DocumentCenter/Home/Index/86

We offer a wide range of meaningful career opportunities with potential for growth, training and development, competitive salaries, flexible work schedules, paid time off, and robust benefits. The Redwood City team is guided by core values of core values of excellence, integrity, service, collaboration, inclusion, and innovation..  Inherent in these values is a great organizational culture based on trust, strong and supportive leadership, respect, risk-taking, empowerment, and effective communication.

The community is known for its inclusivity, strong engaged neighborhoods, and civic pride. The City works diligently to maintain positive and productive relationships with community partners, together providing outstanding services, programs and opportunities for residents and businesses. This mix of tradition and progress, community, and diversity, makes Redwood City an extraordinary place to work and call home. If you’re looking to grow your career as a part of a hard-working and fun Public Works Services Department team that fosters innovation, creativity, and collaboration, we hope you’ll apply. 

 

ABOUT THE POSITION

 

The City of Redwood City Public Works Services Department invites you to apply for the position of Public Works Maintenance Worker III Equipment Operator in the Right-of-Way Division. The Right-of-Way Division is responsible for maintenance of the City’s public right-of-way including streets and roadways, parking lots, roadway markings and painting, streetlights, traffic signals and signs, and street cleaning.  

The position will report to the Public Works Field Supervisor and will serve as a skilled maintenance worker operating a variety of heavy equipment in the construction and maintenance of public right-of-way- assets, assist in scheduling and reviewing work, perform a variety of skilled tasks in the construction, maintenance, repair streets and sidewalks, and occasionally lead a field crew in assigned work. Work will include the skillful operation of construction and maintenance equipment such as street sweepers, backhoes, paving machines, dump trucks, rollers, trucks, tractors, and skip loaders. The position will be involved in the construction and maintenance operation of streets, sidewalks and gutters, will spread asphalt in patching and repairing streets, read and interpret maps of service areas and sweeping districts, and provide technical guidance to less experienced workers.

For a compete job description click: PWMW III-Equipment Operator