Search Jobs

Application filing deadline Open Until Filled- Apply Immediately

Interviews- TBD

Resumes are not accepted in lieu of completing a City application.

DEFINITION

Under general direction, to supervise and review the work of the professional and technical staff of a section of the Engineering Division engaged in preparing and/or reviewing plans, specifications, designs, estimates, and inspections relating to capital improvement, construction, development, and maintenance projects; to coordinate the work of the section with that of the Engineering Division and the Public Works Department; and to perform complex engineering design, construction inspection, contract administration, and related work as assigned.

EXAMPLES OF DUTIES

Provide engineering consultation services to various field and office personnel; design and/or manage design and construction contracts on City's capital improvement projects; review architectural, development and/or engineering maps, plans, specifications, designs, and cost estimates, and provide recommendations on the feasibility of bidding and constructing various construction or maintenance projects prepared in-house or by consultants; administer contracts and inspect construction to insure technical and legal compliance; plan, organize, and coordinate assigned work with other City departments and outside agencies, consultants, and contractors; prepare or direct project-related studies, reports, and correspondence for City administrators, officials, and citizens; research and prepare Issue Statements on various policy questions; assist with preparation of annual division budget; review, revise and maintain the City's General Conditions, Standard Specifications and Drawings ("Standards"); research design and construction procedures and materials, and recommend improvements in Standards to the City Engineer; formally evaluate performance of assigned personnel.

MINIMUM QUALIFICATIONS

Knowledge of: Principles and practices of civil engineering design and construction; principles and techniques of management and supervision including planning, organizing, and developing goals and objectives; principles and practices of design administration including computer aided design (CAD); theories, techniques, materials and equipment used in construction and maintenance of municipal Public Works

improvements; legal issues, including liability laws, relating to municipal construction and civil engineering.

Ability to: Demonstrate skill and/or acquire current knowledge in organizing, managing, supervising and evaluating the work of professional and technical engineering personnel; employ City administrative, budgeting, purchasing, personnel management and other related processes and procedures to assist in managing the division; prepare or direct the preparation of complex plans, specifications, and legal contracts; conduct contract negotiations for City projects; demonstrate clear and effective oral communication; prepare clear and concise correspondence, reports and other written documents; interact positively and cooperate with co-workers, respond politely to customers, work as a team member, function under demanding time pressure, respond in a positive manner to supervision, and attend work and perform duties on a regular and consistent basis.

Education: Possession of a Bachelor's degree in civil engineering or closely related field.

Experience:  Five years of increasingly responsible experience in design and construction management of civil engineering projects, with at least two of the five years at a level equivalent to a City of Daly City Civil Engineering Associate.

License: California registration as a professional Civil Engineer and a valid Class C California Driver's License.

TO VIEW JOB ANNOUNCEMENT, CLICK JOB PDF OR JOB ANNOUNCEMENT URL BELOW.

We invite applications for the position of:

Lifeguard/Swim Instructor

$19.36 per hour

$20.34 per hour with WSI

Open until filled

The City of San Mateo Parks and Recreation Department is looking responsible, enthusiastic,

and energetic individuals to join our Aquatics Section!

Qualifications:

Must be at least 15 years old and have the ability to obtain a work permit, if under the age of 18.  Applicants must have completed and passed the Lifeguard Training class that includes CPR, FPR, and AED by June 1, 2024. WSI (water safety instructor) is highly recommended.

Lifeguard Job Responsibilities:

• The primary responsibility of a lifeguard is to protect lives by using their skills to prevent injury among patrons.  This duty does not only include rescuing drowning victims or administering CPR and first aid.  Being alert and proactive also helps to prevent dangerous situations from ever occurring in the first place.
• Enforcing the rules fairly and consistently is a close second major duty and could even be considered to be a part of patron surveillance.  Help the patrons to keep themselves safe by monitoring and putting an end to dangerous behaviors. 
• Maintenance and cleaning tasks are also part of the lifeguard’s duties.  These can include monitoring chemical levels in the pool, picking up trash and organizing equipment, or inspecting the facility for unsafe conditions.

Swim Instructor Job Responsibilities:

• The swim instructor is responsible for instructing swim lesson participants in a variety of swim levels.
• This position is also responsible for the safety of the participants in their own class.
• Work hours as scheduled which includes beginning and ending class on time; remaining after class to answer participant and/or parent questions as needed and clean up supplies.
• Instructs and evaluates students participating in swim lessons.
• Submits completed report cards, skills sheets, and attendance information on time.           

Schedule:

                Interviews:                             Starting in April

                In-Service Training:              June 8 (new hires only), June 10 – June 14      

                Summer Session:                 June 15 – August 11

                Weekly In-Service:               Every Friday from June 21 – August 9, 10:00am-12:00pm

                Daily Hours: (scheduled shifts may vary)

                                M-F         9:45am-8:15pm

                                S              9:45am-5:15pm

                                SU           12:45pm-5:15pm

Are You Interested? Apply.

Applications can be found on our website at www.cityofsanmateo.org, submit them on-line at www.calopps.org or e-mail applications to shavel@cityofsanmateo.org. If you have any questions, contact Carolyn Shavel via email or 650.522.7473. Applications are also available at the Dr. Martin Luther King Jr. Community Center: 725 Monte Diablo Ave, San Mateo 94401 Application materials will be screened on a continuous basis and must answer the following Supplemental question: “Did a current City of San Mateo employee refer you to this job?” “If yes, please provide their name.”

Fine Print The policy of the City of San Mateo is to grant equal employment opportunity to all qualified persons without regard to race, color, sex, gender, age, religion, ancestry, physical or mental disability, sexual preference, marital status, or national origin. It is the intent and desire of the City of San Mateo that equal employment opportunity will be provided in recruiting, hiring, training, promoting, wages, benefits, and all other privileges, terms, and conditions of employment.

The City of Menlo Park is currently accepting applications for Child Care Teacher I/II.   

These positions are part-time (20 hours a week) and provide a flexible work schedule. We are looking for candidates that enjoy teaching & working with preschool and school aged children. The working hours are Monday through Friday.

The City of San Mateo Public Works Department is looking for a Senior Instrument Control Technician

Why Join our Department?

The Public Works Department’s Environmental Services Division (ESD) is responsible for the operation and maintenance of the City’s 15.7 million gallon per day (MGD) conventional activated sludge wastewater treatment plant (WWTP).  The WWTP serves a population of more than 140,000 with an annual operating budget in excess of $15 million and has a staff of 33 professional and technical personnel.  Planned upgrades to the WWTP include new liquids treatment process facilities consisting of new headworks, primary treatment, and biological nutrient removal/membrane bioreactor (BNR/MBR) process.  When you join the Public Works Department, you will work among collaborative and energetic colleagues who share a passion for serving our San Mateo citizens and improving the community in which we live and work.  Our team is comprised of individuals with diverse talents and experience in various fields.  We will provide you with a wide range of opportunities in a team-based collaborative environment while helping you achieve your professional goals.

Collaboration, Innovation, Respect, Creativity, Transparency and Informed Risk-taking are attributes within the City’s mission, values and organizational principles that we are seeking in the candidates.

Look to some of the reasons why the City of San Mateo is a great place to work: https://www.youtube.com/watch?v=_GTIzeSpc_g

What You'll Do

The Senior Instrument Control Technician installs, maintains, calibrates, tests and repairs a variety of data acquisition, radio communications, and instrumentation and control equipment for wastewater collection and treatment plant systems; principal oversight of Supervisory Control and Data Acquisition (SCADA) computer systems and Programmable Logic Controllers (PLC); assists in the oversight of the Computerized Maintenance Management Systems (CMMS); performs highly skilled electrical, electronic and mechanical work related to in-plant metering equipment and remote controlled devices; operates, monitors, and controls an advanced wastewater treatment (tertiary) system; and performs other related work as required.

Depending upon assignment, duties may include, but are not limited to the following:

• Assist in the installation, calibration, maintenance and troubleshooting of electronic and electromechanical equipment to ensure proper operation; assist in the troubleshooting and repairing of control system and electrical power failures in the WWTP, pump and lift station.
• Install, calibrate, maintain, troubleshoot and repair electronic and electromechanical equipment to ensure proper operation; maintain and troubleshoot computerized process control equipment such as PLCs, RTUs, and SCADA system devices; troubleshoot control system and electrical power system failures in plants, lifts and pump stations; and maintain awareness of new related technology.
• Develops and implements improvement projects for the instrumentation and controls systems and equipment by contractors or in-house staff. Clean, oil and paint equipment.
• Maintain documentation and records for the department’s SCADA system and instrumentation/control systems at the wastewater treatment plant (schematics, licenses, etc.).  Perform regular technical programming of the SCADA system to provide programming and troubleshooting assistance as needed during special testing and operations. Confer with operators, mechanics, project engineers and supervisors regarding SCADA issues.
• Respond to and resolve internal customer complaints and issues; provide documentation as required. Communicate in advance with affected staff on programming and related SCADA work.
• Provide oversight, technical support, inspection and coordination over control system modification made by contractors. Maintain documentation and plans of modifications.
• Prepare reports on technical issues as required.
• Develop, implement, and maintain procedures for documenting activities in instrumentation and control areas related to programming of RTUs and HMI software, field implementation of programming change, and process control improvements.
• Provides safety and skills training to apprentice instrumentation technicians, electrician and other plant staff.
• Write basic PLC programming for the implementation of system modifications and process enhancements. Interpret, prepare, and verify control schematics, diagrams and prints.  Provide technical assistance and guidance to staff. Program control systems, instruments and computer operated devices.
• Read, understand and perform minor modifications to existing PLC code. Download PLC programs to PLCs and RTUs.
• Perform as lead person on Instrumentation/Controls projects; effectively provide training and direction to the Instrument Control Technician, calibration Technician and other plant staff.
• Install, troubleshoot, modify, and implement computer hardware and software applications and components. Analyze and correct data communication and acquisition system problems.
• Design, install, test, repair, calibrate and maintain complex electrical, electronic and mechanical equipment such as meters, telemeters, integrators, tone control equipment, temperature control devices, fire alarm equipment, water quality analyzers, life safety equipment, and remote controlling devices, including relays, rectifiers, and manometers.
• Perform related duties as assigned.

The Senior Instrument Control Technician receives supervision from the Wastewater Treatment Plant Maintenance Superintendent.  This position performs lead duties over the Instrumentation Control Technician and Calibration Technician and may provide technical or functional supervision related to the impacted systems to Plant operations or maintenance personnel, contractors or other designed personnel as required.

For a complete list of duties, reference our job specifications at https://www.cityofsanmateo.org/DocumentCenter/Home/Index/86

The City of San Mateo Public Works Department is looking for a Calibration Technician

Why Join our Department?

The Public Works Department’s Environmental Services Division (ESD) is responsible for the operation and maintenance of the City’s 15.7 million gallon per day (MGD) conventional activated sludge wastewater treatment plant (WWTP).  The WWTP serves a population of more than 140,000 with an annual operating budget in excess of $15 million and has a staff of 33 professional and technical personnel.  Planned upgrades to the WWTP include new liquids treatment process facilities consisting of new headworks, primary treatment, and biological nutrient removal/membrane bioreactor (BNR/MBR) process.  When you join the Public Works Department, you will work among collaborative and energetic colleagues who share a passion for serving our San Mateo citizens and improving the community in which we live and work.  Our team is comprised of individuals with diverse talents and experience in various fields.  We will provide you with a wide range of opportunities in a team-based collaborative environment while helping you achieve your professional goals.

Collaboration, Innovation, Respect, Creativity, Transparency and Informed Risk-taking are attributes within the City’s mission, values and organizational principles that we are seeking in the candidates.

Look to some of the reasons why the City of San Mateo is a great place to work: https://www.youtube.com/watch?v=_GTIzeSpc_g

What You'll Do

The Calibration Technician installs, maintains, calibrates, tests and repairs a variety of data acquisition, radio communications, and instrumentation for wastewater collection and treatment plant systems; assists in the oversight of Supervisory Control and Data Acquisition (SCADA) computer systems and Programmable Logic Controllers (PLC) to perform skilled electrical, electronic and mechanical work related to inplant metering equipment and remote controlled devices; operates, monitors, and controls an advanced wastewater treatment (tertiary) system; and  performs other related work as required.

Depending upon assignment, duties may include, but are not limited to the following:

• Assist in the installation, calibration, maintenance and troubleshooting of electronic and electromechanical equipment to ensure proper operation; assist in the troubleshooting and repairing of control system and electrical power failures in the WWTP, pump and lift station.
• Install, calibrate, maintain, troubleshoot and repair electronic and electromechanical equipment to ensure proper operation; maintain and troubleshoot computerized process control equipment such as PLCs, RTUs, and SCADA system devices; troubleshoot control system and electrical power system failures in plants, lifts and pump stations; and maintain awareness of new related technology.
• Confer with operators, mechanics, project engineers and supervisors regarding SCADA issues.
• Respond to and resolve internal customer complaints and issues; provide documentation as required.  Communicate in advance with affected staff on programming and related SCADA work.
• Prepare reports on technical issues as required.
• Develop, implement, and maintain procedures for documenting activities in instrumentation and control areas related to programming of RTUs and HMI software, field implementation of programming change, and process control improvements.
• Interpret, prepare, and verify control schematics, diagrams and prints.  Provide technical assistance and guidance to staff. Program control systems, instruments and computer operated devices.
• Install, troubleshoot, modify, and implement computer hardware and software applications and components.  Analyze and correct data communication and acquisition system problems.
• Install, test, repair, calibrate and maintain complex electrical, electronic and mechanical equipment such as meters, temperature control devices, fire alarm equipment, and remote water quality analyzers controlling devices, including relays, rectifiers, and manometers.
• Perform related duties as assigned.

The Calibration Technician receives general supervision from the Wastewater Treatment Plant Maintenance Superintendent.  The position may provide technical or functional supervision related to the impacted systems to Plant operations or maintenance personnel, contractors or other designed personnel as required.

For a complete list of duties, reference our job specifications at https://www.cityofsanmateo.org/DocumentCenter/Home/Index/86

Applications will be accepted until the position is filled.

This Temporary/Hourly position is NOT in Civil Service and does not receive benefits.

 DEFINITION

Under supervision, performs sub-professional engineering office work related to Public Works improvements; elementary field surveying; computer-aided drafting and design work; and related work as required.

EXAMPLES OF DUTIES

Performs a wide variety of responsible sub-professional engineering work; computes and posts simple engineering data; computer-aided drafting, design, and mapping; revises, reviews, files, and updates engineering plans and maps; assists field survey and traffic survey crews as needed.

MINIMUM QUALIFICATIONS

Knowledge of: The elementary principles of algebra, geometry, and trigonometry; drafting symbols used in construction work; basic engineering office equipment; modern personal computers and related computer software; principles and practical application of computer-aided drafting, design, and mapping systems.

Ability to: Learn the use of surveying equipment and techniques; learn basic construction inspection procedures; accurately make and verify mathematical computations; perform neat and accurate drafting; collect engineering field data, and make field notes; maintain accurate records; effectively operate computer-aided drafting, design and mapping software; effectively use modern office software; understand and carry out oral and written instructions; work flexible hours; deal effectively and courteously with the public and general contractors; attend work and perform duties as assigned.

Experience: None required

Education: Completion of 45 semester college units with major in civil engineering or related course of study.

License: Possession of valid Class C California Driver's License.

The City of San Mateo Public Works Department is looking for a

Wastewater Treatment Plant Mechanic III

Why Join our Department?

The Public Works Department’s Environmental Services Division (ESD) is responsible for the operation and maintenance of the City’s 15.7 million gallon per day (MGD) conventional activated sludge wastewater treatment plant (WWTP).  The WWTP serves a population of more than 140,000 with an annual operating budget in excess of $15 million and has a staff of 33 professional and technical personnel. Planned upgrades to the WWTP include new liquids treatment process facilities consisting of new headworks, primary treatment, and biological nutrient removal/membrane bioreactor (BNR/MBR) process.  When you join the Public Works Department, you will work among collaborative and energetic colleagues who share a passion for serving our San Mateo citizens and improving the community in which we live and work. Our team is comprised of individuals with diverse talents and experience in various fields.  We will provide you with a wide range of opportunities in a team-based collaborative environment while helping you achieve your professional goals.

Collaboration, Innovation, Respect, Creativity, Transparency and Informed Risk-taking are attributes within the City’s mission, values and organizational principles that we are seeking in the candidates.

Look to some of the reasons why the City of San Mateo is a great place to work: https://www.youtube.com/watch?v=_GTIzeSpc_g

What You'll Do

The Wastewater Treatment Plant (WWTP) Mechanic III performs highly skilled mechanical and minor electrical work in the installation, alteration, maintenance and repair of electrical systems, equipment and fixtures in a wastewater treatment plant and provides lead worker oversight as necessary; to do other related work as required.  This is an advanced journey level class in the WWTP Mechanic series.  This position is distinguished from WWTP Mechanics I/II by its lead function and the degree of technical expertise required in performing the more complex work.  This class may be responsible for lead supervision of WWTP Mechanics I/II.

Depending upon assignment, duties may include, but are not limited to the following:

• Read and interpret drawings, plans and diagrams of wastewater treatment plant infrastructure, equipment, controls and instrumentation.
• Install, inspect, diagnose, and perform major and minor mechanical repair work on motors, pumps, boilers, hydraulic and pneumatic equipment, generators, filters, and other plant equipment.
• Use a variety of tools, hand tools, cutting and welding equipment and multi-meters.
• Clean, oil and paint equipment.
• Perform preventive and corrective maintenance of all plant infrastructure particularly mechanical and electrical systems.
• Evaluate equipment performance and identify problem areas.
• Assist with maintaining inventory and supply of replacement parts.
• Perform general maintenance duties at the WWTP and Pump Station, including buildings, grounds and equipment as required.
• Provide lead supervision and training to less experienced maintenance mechanic personnel and assure safe work practice and procedures are always being followed.
• May be required to respond to emergency situations after normal working hours and be subject to serve on emergency stand-by alert and call out status on a rotational basis.
• Adhere to purchasing policy.
• Maintain a variety of chemical measuring equipment and plant process instrumentation.
• Fully support and utilize the Computerized Maintenance Management System to maintain accurate records and reports of work performed.
• Assist with installation of plant-related electrical systems, including but not limited to conduits, wires, relays, pull boxes, switch boards and switches required for additions, extensions or modifications to plant components.
• Perform related duties and responsibilities as assigned.

The Wastewater Treatment Plant Mechanic III receives supervision and direction from the Wastewater Treatment Plant Maintenance Superintendent and technical or functional supervision may be provided by higher level treatment plant maintenance personnel.  This position exercises lead supervision over other plant Maintenance Mechanics I/II, including provision of technical supervision, assignment of work and/or the training of less experienced mechanics.

For a complete list of duties, reference our job specifications at https://www.cityofsanmateo.org/DocumentCenter/Home/Index/86

The City of San Mateo Public Works Department is looking for a

Wastewater Treatment Plant Mechanic I/II

Why Join our Department?

The Public Works Department’s Environmental Services Division (ESD) is responsible for the operation and maintenance of the City’s 15.7 million gallon per day (MGD) conventional activated sludge wastewater treatment plant (WWTP).  The WWTP serves a population of more than 140,000 with an annual operating budget in excess of $15 million and has a staff of 33 professional and technical personnel.  Planned upgrades to the WWTP include new liquids treatment process facilities consisting of new headworks, primary treatment, and biological nutrient removal/membrane bioreactor (BNR/MBR) process.  When you join the Public Works Department, you will work among collaborative and energetic colleagues who share a passion for serving our San Mateo citizens and improving the community in which we live and work.  Our team is comprised of individuals with diverse talents and experience in various fields.  We will provide you with a wide range of opportunities in a team-based collaborative environment while helping you achieve your professional goals.

Collaboration, Innovation, Respect, Creativity, Transparency and Informed Risk-taking are attributes within the City’s mission, values and organizational principles that we are seeking in the candidates.

Look to some of the reasons why the City of San Mateo is a great place to work: https://www.youtube.com/watch?v=_GTIzeSpc_g

What You’ll Do

The Wastewater Treatment Plant (WWTP) Mechanic I/II performs semi‑skilled and skilled work in the installation and repair of pumps, motors, chain drives, valves and related equipment and to do related work as required.  The WWTP Mechanic I is the entry level class in the Plant Mechanic series.  Positions in this class normally perform beginning level mechanical repair and maintenance work on a wide variety of wastewater quality control plant systems and equipment. Under this class series concept, positions assigned to the class of Plant Mechanic II may reasonably be filled at the Plant Mechanic I level.  The WWTP Mechanic II is the journey level class in the Plant Mechanic series. Positions assigned to this class are flexibly staffed and are expected to perform the most skilled repair and maintenance work and have a thorough knowledge of the operational characteristics, maintenance and repair methods and techniques and most typical system difficulties for the full range of equipment and operational systems in the plant. All positions assigned to this class require the ability to work independently, exercising judgment and initiative. Plant Mechanics II may also be expected to assist in the supervision of less experienced personnel.

Depending upon assignment, duties may include, but are not limited to the following:

• Operate machines and tools in repairing defective parts of pumps, compressors, generators, motors, lift stations, boilers and related mechanical equipment.
• Maintain accurate mechanical maintenance records.
• Install, repair, replace, and modify pumps, controllers, bearings, seals, hydraulic pipes, timing devices and assist in installing telemetering electrical equipment.
• Use a variety of power hand tools, cutting and welding equipment and electrical test equipment. Fully utilize the computerized work systems in accordance with work flow processes.
• Perform preventive maintenance on wastewater treatment plant mechanical and electrical equipment. Evaluate equipment performance and identify problem areas.
• Maintain stock inventory and adequate supply of replacement parts.
• Plant mechanics may be required to respond to emergency situations after normal working hours and be subject to serve on emergency stand-by alert and call out status on a rotational basis, including participation in rotating stand-by duties.
• Analyze or create documents, such as blueprints, markings, surveys, etc. to problem solve the most effective approach to a task.
• Verify the work of others for accuracy, proper work methods, techniques, and compliance.
• Formulate solutions to problems with equipment or operations, including logistics, operations, and processes.
• Draft operating procedures.

The Wastewater Treatment Plant Mechanic I/II receives supervision from the Wastewater Treatment Plant Maintenance Superintendent or Wastewater Treatment Plant Mechanic III as directed technical or functional supervision may be provided by higher level treatment plant maintenance personnel.  Assignments may require indirect supervision of less experienced plant maintenance personnel.

For a complete list of duties, reference our job specifications at https://www.cityofsanmateo.org/DocumentCenter/Home/Index/86

SAN CARLOS SCHOOL DISTRICT
1200 Industrial Road, Unit 9
San Carlos CA 94070

POSITION ANNOUNCEMENT

Applications forms for the following position are now being accepted for a full time position in the San Carlos School District.

AVAILABLE:                Clerical and Secretary substitutes

LOCATION:                 To be determined

WORK YEAR:              As needed

START DATE:              As soon as possible

SALARY:                     $23.57 
                                    

ADA REQUIREMENTS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee is occasionally required to stand, reach with hands and arms; stoop, kneel, crouch and crawl. The employee must occasionally lift and/or move up to 15 pounds. Specific vision abilities required by this job include close vision, distance vision and ability to adjust focus.

To apply:                     https://www.edjoin.org/Home/DistrictJobPosting/1321603

This is an announcement of a position and does not constitute a commitment for an interview.

The San Carlos School District is an equal opportunity employer.