Search Jobs

Final Filing Date: First review of applications will be on June 18, 2020. NCPA reserves the right to close the posting once a sufficient number of qualified applications have been received.

Summary

The Mechanic Operator position consists of five levels of competency.  Individuals can either enter into the classification at the beginning level of the job or somewhere between the entry level and the top step depending on the qualifications brought with them.  It is the expectation of NCPA that all employees progress to the top level.  In order to progress to the top level an employee must complete all components in a competency level within the associated training matrix.  Employees who successfully complete a training level matrix and who received a rating of “meets requirements” or higher by their immediate supervisor will be promoted when qualified.  Upon completion/demonstration of competencies employees will be expected to perform work in all completed levels and other job-related duties as required. All employees have the right to challenge any component in the training matrix by proving proficiencies verbally and practically.

General Scope of the Job

Under general supervision of the Mechanical Maintenance Supervisor and at times under the general direction of the Mechanic Operator Lead Person; to maintain, repair, adjust, install, and test, powerplant steam field, water injection systems and equipment and maintain lease site grounds.  The measure of accuracy and reliability is the safe, effective and efficient performance of the Facilities.  This position is predominately mechanic based with operation support as outlined below.

Description of Duties and Responsibilities

Level III

This level of the Mechanic Operator position requires the completion of all Level III training requirements. The employee must perform the duties as described below and as defined in lower levels while attaining Level IV skills and experience through academic and hands-on training. Level III knowledge and skills focus on journey level mechanical duties and responsibilities.

• Inspects, tests, calibrates, installs, rebuilds, adjusts, repairs and aligns all mechanical equipment such as hydraulic control systems, turbines, generators, cooling tower, pumps, electric motors, valves, gear reducers, compressors, blowers heat exchangers, HVAC systems excluding refrigerant replacement, fire protection systems, diesel and gas engines, mufflers, separators, traps, rock catchers, tanks, pipeline and pipe supports.
• Maintains fleet vehicles.
• Maintains facility structures, plumbing, and roads.
• Performs basic inspections and repairs various rigging equipment, fixtures and cranes.
• Assists the scaffolding qualified journeyman in maintaining, and repairing scaffolding.
• Inspects and maintains safety devices such as harnesses and rescue equipment.
• Works with Safety Manager to maintain records of regulated equipment.
• Keeps accurate records of equipment history, reports and work orders on computer for CMMS.  Works with CMMS personnel for accuracy and reliability.
• Performs preventative maintenance and assessments on various plant equipment.
• Writes Work/Operating Procedures within area of expertise.
• Requisitions replacement parts and supplies to carry out assigned tasks.
• Makes working drawings of components and changes made to Plant systems relative to area of expertise.
• Installs, inspects, tests, repairs, rebuilds, and maintains equipment such as portable and fixed site pumps, valves, mufflers, separators, traps, rock catchers, turbines, generators, motors, gear reducers, compressors and hydraulic control systems, pipelines, tanks, pipeline supports, effluent piping components.
• Maintains lease site grounds structures, culverts, roads, drains and ditches.
• Examines and diagnoses malfunctions or defective equipment on pumps, motors, valves, separators, vents, air vacuum breakers and compressors; disassembles/reassembles, overhauls and adjusts defective equipment.
• Installs, fits and calibrates equipment replacement parts.  Observes equipment operation.  Adjusts equipment to operational specifications using specialized tools and precision measuring instruments.
• Disassembles, removes, repairs, replaces, assembles and aligns pipes, pipeline components, and valves repairing or replacing broken and worn parts using various hand tools.
• Observes and directs contractors while digging trenches, cleaning tanks and maintaining lease site grounds.
• Under the direction and training of operations, assists with clearances on steam field and effluent pipeline equipment for maintenance purposes.
• Performs basic welding.
• Rigs and lifts equipment to install, repair or replace equipment.
• Instructs and trains workers in repair and maintenance procedures of steam field, power plant and effluent pipeline equipment.
• Maintains inventory of tools and materials for the maintenance work at the steam field and effluent pipeline.
• Maintains steam field equipment records on work completed for RCM.
• Assists other classifications when needed.
• Performs other job-related duties as required.
• Acquire OSHA certified training to meet business needs.
• Trains and advises other workers in the maintenance and operation of steam field and effluent pipeline equipment.
• Maintains and repairs Hydraulic Control Systems.

Application of Technical and General Job Skills

• Technical and job skills are indicated by demonstrating an ability to:
• Efficiently and effectively operate, control, and maintain equipment, and be accountable for aspects of the job at the Geothermal Facility.
• Implement or use existing methods to control the waste of time, money and material resources, such as:
  • Acting to improve work procedures
  • Conserving resources
  • Expediting a job
  • Completing a work assignment efficiently
  • Completing long term work in an orderly fashion
• Work with management to identify and learn from mistakes made and apply what is learned to future situations or plant conditions.
• Establish and maintain effective work relationships with those contacted in the performance of required duties.
• Review own action to determine the cause of poor working relationships so those relationships can be improved
• May be required to work extended hours and on normal days off.
• Operate Agency vehicles and equipment safety.

Training and Experience Requirements

Level III

• Completion of the NCPA Level III training program or three years of equivalent journey level mechanical experience.
• Maintaining a level of technical proficiency in current job as demonstrated by performance reviews and evaluations.                                                             

Driver’s License Requirement

Possession of an unrestricted Class C California operator’s license issued by the State of California, Department of Motor Vehicles.  Possession and maintenance of a good driving record as demonstrated by the absence of multiple or serious traffic violations or accidents within the last three (3) years.

EOE

FINAL FILING DATE: Open Until Filled. First cut-off is June 1st, 2020.

IT IS MANDATORY THAT YOU COMPLETE THE SUPPLEMENTAL QUESTIONNAIRE. YOUR APPLICATION WILL BE REJECTED IF YOU DO NOT PROVIDE ALL NECESSARY INFORMATION.

THE POSITION

The Human Resources Department is establishing a list for the position of Refuse Maintenance Worker II in the Environmental Utilities Department. The list established for this recruitment may also be utilized to fill any limited term or part-time, temporary vacancies. The term length for limited term placements is not guaranteed but cannot exceed 36 months. A part-time temporary position cannot exceed 25 hours per week. The normal work schedule includes holidays and weekends.

The City of Roseville promotes a no smoking atmosphere.

THE CITY

The City of Roseville (COR) incorporates the following Core Competencies as part of the City’s culture:

• Focus on people: Develop and deliver service-oriented solutions that meet or exceed expectations.
• Build trust: Ensure honesty and integrity to gain confidence and support of others.
• Ensure accountability: Take responsibility for the outcomes of one’s own work and foster a sense of ownership in others.
• Communicate effectively: Deliver clear, concise messages and actively listen to ideas and questions.
• Collaborate inclusively:  Build effective working partnerships, alliances, and teams.
• Make quality decisions: Make sound, timely decisions and recommendations.
• Be adaptable/agile: Change approach or methods to best fit the situation and effectively balance competing priorities.

DEFINITION

To perform semi-skilled and skilled labor in the maintenance and repair of refuse bins and vehicles used in residential and commercial refuse collection.

DISTINGUISHING CHARACTERISTICS

This is the journey level class in the Refuse Maintenance Worker series and is distinguished from the I level by the ability to perform the full range of duties assigned, with only occasional instruction or assistance as unusual or unique situations arise.  Positions in this class are flexibly staffed and are normally filled by advancement from the I level.

SUPERVISION RECEIVED AND EXERCISED

Receives general supervision from a Refuse Supervisor, receives technical and functional supervision from a Senior Refuse Truck Driver.

EXAMPLES OF ESSENTIAL DUTIES - Duties may include, but are not limited to, the following:

• Maintain and repair refuse collection bins, including cleaning, painting, and making structural repairs such as replacing and/or fabricating wheels, castors, lids, and gate pins.
• Inspect refuse collection vehicles and perform light maintenance as needed; steam clean refuse collection trucks.
• Drive a bin truck and deliver refuse collection containers to new residential and commercial customers/units; exchange bins or cans as needed.
• Clean up waste spills, fluids, glass, and trash at various locations.
• Fill out and submit required forms.
• Assist Refuse Truck Drivers on residential and commercial routes, as necessary.
• Build and maintain positive working relationships with co-workers, other City employees, and the public using principles of good customer service.
• Perform related duties as assigned.

MINIMUM QUALIFICATIONS

Knowledge of:

• Uses and purposes of general mechanical tools and equipment; safe work practices.
• Methods, techniques, tools and operating characteristics of mechanical equipment used in the maintenance and repair of refuse collection equipment.

Ability to:

• Learn to perform unskilled and semi-skilled tasks related to a variety of refuse equipment maintenance activities; perform heavy physical labor.
• On a continuous basis, know and understand operations, and observe safety rules.  Intermittently analyze problem equipment; identify and locate equipment; interpret work orders; remember equipment location; and explain jobs to others.
• Intermittently, sit while studying or preparing reports; bend, squat, climb, kneel and twist when performing installation of equipment; perform simple and power grasping, pushing, pulling, and fine manipulation; and lift or carry weight of 40 pounds or less.
• Communicate clearly and concisely, both orally and in writing.
• Establish and maintain effective working relationships with those contacted in the course of work.
• Independently perform semi-skilled and skilled work in the maintenance and repair of refuse collection equipment.
• Operate a variety of vehicular and stationary mechanical equipment, including bin truck, flatbed truck, as well as grinders, cutters, saws, welding equipment, and generator.

EXPERIENCE AND TRAINING

Experience:

Two years of increasingly responsible experience performing maintenance and repair work of refuse collection equipment similar to that of a Refuse Maintenance Worker I with the City of Roseville.

Training:

Equivalent to completion of the twelfth (12th) grade, GED, or higher level degree.

License or Certificate:

Possession of a valid California Class B driver’s license, with airbrakes by date of application.

SUPPLEMENTAL QUESTIONNAIRE

1. Your responses to questions 2-4, the applicant’s education, training and experience, will be scored using a pre-determined formula.  Your responses to these questions must be consistent with your employment application information.  This experience must also be described in the “Work Experience" section of this application.  Responses to the supplemental questionnaire that are inconsistent from your “Work Experience” section in the application will not be scored.  I understand and agree with the above instructions.

• Yes
• No

2. Was any of the work experience listed on your application an unpaid internship, or volunteer work?  If so, please list below which ones.
3.  How many years of professional experience do you have performing semi-skilled and skilled labor in the maintenance and repair of refuse bins and vehicles used in residential and commercial refuse collection?

• Less than 2 years
• 2-3 Years
• 3-4 Years
• 4-5 Years
• 5-6 Years
• 6+ Years

4.  Please describe your experience using each of the following hand tools: Hammer, Wrench, Screw Driver, Pruner, Tape Measure.
5. Please describe your experience using each of the following power tools: Weed Eater, Drill, Pressure Washer, Blower, Grinder, Impact Wrench.
6. Please describe your experience operating the following equipment: Air Compressor, Forklift, Backhoe, Refuse Truck, Tailgate Lift, Wire Feed Welder, Trash Compactor.
7. Select the option that describes your valid California Driver’s License.

• None of these
• Class B or higher
• Class C

SELECTION PROCESS

All candidates meeting the minimum qualifications will have their application scored in a Formula Rate Examination.  The applicant’s experience and education will be evaluated using a pre-determined formula.  Scores from this evaluation will determine applicant ranking and placement on the Employment List.  Supplemental questions will be utilized by the department hiring authority to make interview and selection determinations.  Final appointment is contingent upon a check of past employment references, passing a City-paid fingerprint check and depending on position applied for a pre-employment medical exam and a drug and alcohol screening test.

THE CITY OF ROSEVILLE IS AN EQUAL OPPORTUNITY EMPLOYER.  IF YOU REQUIRE AN ACCOMMODATION DUE TO A DISABILITY, PLEASE CONTACT THE HUMAN RESOURCES DEPARTMENT AT LEAST 5 WORKING DAYS BEFORE A SCHEDULED INTERVIEW/EXAMINATION PROCESS.  MEDICAL DISABILITY VERIFICATION MAY BE REQUIRED PRIOR TO ACCOMMODATION.

FINAL FILING DATE: Open Until Filled. First cut-off is June 1st, 2020.

IT IS MANDATORY THAT YOU COMPLETE THE SUPPLEMENTAL QUESTIONNAIRE. YOUR APPLICATION WILL BE REJECTED IF YOU DO NOT PROVIDE ALL NECESSARY INFORMATION.

THE POSITION

The Human Resources Department is establishing a list for the position of Refuse Maintenance Worker I in the Environmental Utilities Department. The list established for this recruitment may be utilized to fill any regular, limited term or part-time, temporary vacancies. The term length for limited term placements is not guaranteed but cannot exceed 36 months. A part-time temporary position cannot exceed 25 hours per week. The normal work schedule is Monday through Friday, 8 –5 pm; a flex schedule may be available.

The City of Roseville promotes a no smoking atmosphere.

THE CITY

The City of Roseville (COR) incorporates the following Core Competencies as part of the City’s culture:

• Focus on people: Develop and deliver service-oriented solutions that meet or exceed expectations.
• Build trust: Ensure honesty and integrity to gain confidence and support of others.
• Ensure accountability: Take responsibility for the outcomes of one’s own work and foster a sense of ownership in others.
• Communicate effectively: Deliver clear, concise messages and actively listen to ideas and questions.
• Collaborate inclusively:  Build effective working partnerships, alliances, and teams.
• Make quality decisions: Make sound, timely decisions and recommendations.
• Be adaptable/agile: Change approach or methods to best fit the situation and effectively balance competing priorities.

DEFINITION

To perform semi-skilled and skilled labor in the maintenance and repair of refuse bins and vehicles used in residential and commercial refuse collection.

DISTINGUISHING CHARACTERISTICS

This is the entry level class in the Refuse Maintenance Worker series.  Positions in this class typically have little or no directly related work experience and work under immediate supervision while learning job tasks.  The Refuse Maintenance Worker I class is distinguished from the II level by the performance of less than the full range of duties assigned to the II level.  Incumbents work under immediate supervision while learning job tasks, progressing to general supervision as procedures and processes are learned.

SUPERVISION RECEIVED AND EXERCISED

Receives immediate supervision from a Refuse Supervisor, receives technical and functional supervision from a Senior Refuse Truck Driver.

EXAMPLES OF ESSENTIAL DUTIES - Duties may include, but are not limited to, the following:

• Maintain and repair refuse collection bins, including cleaning, painting, and making structural repairs such as replacing and/or fabricating wheels, castors, lids, and gate pins.
• Inspect refuse collection vehicles and perform light maintenance as needed; steam clean refuse collection trucks.
• Drive a bin truck and deliver refuse collection containers to new residential and commercial customers/units; exchange bins or cans as needed.
• Clean up waste spills, fluids, glass, and trash at various locations.
• Fill out and submit required forms.
• Assist Refuse Truck Drivers on residential and commercial routes, as necessary.
• Build and maintain positive working relationships with co-workers, other City employees, and the public using principles of good customer service.
• Perform related duties as assigned.

MINIMUM QUALIFICATIONS

Knowledge of:

• Uses and purposes of general mechanical tools and equipment; safe work practices.

Ability to:

• Learn to perform unskilled and semi-skilled tasks related to a variety of refuse equipment maintenance activities; perform heavy physical labor.
• On a continuous basis, know and understand operations, and observe safety rules.  Intermittently analyze problem equipment; identify and locate equipment; interpret work orders; remember equipment location; and explain jobs to others.
• Intermittently, sit while studying or preparing reports; bend, squat, climb, kneel and twist when performing installation of equipment; perform simple and power grasping, pushing, pulling, and fine manipulation; and lift or carry weight of 40 pounds or less.
• Communicate clearly and concisely, both orally and in writing.
• Establish and maintain effective working relationships with those contacted in the course of work.

EXPERIENCE AND TRAINING

Experience:

No experience is required; some general maintenance experience is preferred.

Training:

Equivalent to completion of the twelfth (12th) grade, GED, or higher level degree.

License or Certificate:

Possession of a valid California Class C driver’s license by date of appointment.

SUPPLEMENTAL QUESTIONNAIRE

1. Your responses to questions 2-4, the applicant’s education, training and experience, will be scored using a pre-determined formula.  Your responses to these questions must be consistent with your employment application information.  This experience must also be described in the “Work Experience" section of this application.  Responses to the supplemental questionnaire that are inconsistent from your “Work Experience” section in the application will not be scored.  I understand and agree with the above instructions.

• Yes
• No

2. Was any of the work experience listed on your application an unpaid internship, or volunteer work?  If so, please list below which ones.
3.  How many years of professional experience do you have performing semi-skilled and skilled labor in the maintenance and repair of refuse bins and vehicles used in residential and commercial refuse collection?

• Less than 1 year

• 1-2 Years

• 2-3 Years

• 3-4 Years

• 4+ Years

4. Please describe your experience using each of the following hand tools: Hammer, Wrench, Screw Driver, Pruner, Tape Measure.
5.  Please describe your experience using each of the following power tools: Weed Eater, Drill, Pressure Washer, Blower, Grinder, Impact Wrench.
6.  Please describe your experience operating the following equipment: Air Compressor, Forklift, Backhoe, Refuse Truck, Tailgate Lift, Wire Feed Welder, Trash Compactor.
7.  Select the option that describes your valid California Driver’s License.

• None of these
• Class B or higher
• Class C

SELECTION PROCESS

All candidates meeting the minimum qualifications will have their application scored in a Formula Rate Examination.  The applicant’s experience and education will be evaluated using a pre-determined formula.  Scores from this evaluation will determine applicant ranking and placement on the Employment List.  Supplemental questions will be utilized by the department hiring authority to make interview and selection determinations.  Final appointment is contingent upon a check of past employment references, passing a City-paid fingerprint check and depending on position applied for a pre-employment medical exam and a drug and alcohol screening test.

THE CITY OF ROSEVILLE IS AN EQUAL OPPORTUNITY EMPLOYER.  IF YOU REQUIRE AN ACCOMMODATION DUE TO A DISABILITY, PLEASE CONTACT THE HUMAN RESOURCES DEPARTMENT AT LEAST 5 WORKING DAYS BEFORE A SCHEDULED INTERVIEW/EXAMINATION PROCESS.  MEDICAL DISABILITY VERIFICATION MAY BE REQUIRED PRIOR TO ACCOMMODATION.

Final Filing Date: Continuous until filled. First review of applications will be on June 9th, 2020.

Summary

The Combustion Turbine Specialist (CTS) position consists of five levels of competency. Individuals can either enter int°' the classification at the beginning level of the job or somewhere between the entry level and the top step depending on required qualifications brought with them. It is the expectation of NCPA that all employees will progress to the top level.  In order to progress to the top level, an employee must complete the necessary

competency levels as described in the “Combustion Turbine Administrative Procedure” manual (CT-PAP-019 CTS Level Progression available upon request for review). This job description does not include the Lead position and does not modify or supersede any policy or procedure related to requirements for qualified electrical workers. This job description incorporates requirements for CTS positions assigned as Relief. Employees who successfully complete a training level matrix and who received a rating of “meets requirements” or higher on their last annual performance appraisal will be promoted when qualified. Upon completion of demonstrated competencies, employees will be expected to perform work in all completed levels and other job-related duties as required.

General Scope of the Job

Combustion Turbine Specialists at all levels will report to the Operations and Maintenance Supervisors.

The CTS position is a broad banded position requiring a breadth of knowledge and ability in combustion turbine operations which consists of four core skillsets: operations, electrical, mechanical and instrumentation & control. All CTS employees will be expected to broaden their core skillset and develop and work into the other skillsets.

Description of Duties and Responsibilities

The CTS operates, controls, and accurately and reliably maintains mechanical and electrical equipment at the Combustion Turbine Facilities.

In the course of performing his/her duties, it is expected that the CTS will operate forklifts, bucket trucks, aerial lifts, agency vehicles and other equipment. The CTS is required to have a valid California Driver’s License, Class C issued by the State of California Department of Motor Vehicles.

The CTS duties will be performed by individuals with four key strengths; operations, mechanical maintenance, electrical maintenance and instrumentation and controls. The CTS must possess experience with computer applications, especially computerized maintenance management systems, word processing and spreadsheet applications and basic understanding of chemistry, hydraulics, electricity and mathematics as well as all the necessary tools and equipment to carry out the job duties.

The CTS will identify problems or trends with systems and equipment early to prevent problems and failures and will confer with Operations and Maintenance Supervisors to resolve system problems and offers a variety of workable solutions to complex problems and report status of systems and equipment.

The CTS will report to and take direction from the Operations and Maintenance Supervisors and will work efficiently and effectively to operate, control, and maintain turbine generator units and auxiliary equipment, and be accountable for all aspects of the job at all NCPA Combustion Turbine facilities.

The CTS assigned to relief status will primarily use the combustion turbine operations skill set and stand watch for any absent operators. However, when not working relief shifts, the CTS will be on dayshift. While on dayshift, it is expected the CTS will perform maintenance duties utilizing any other skill sets. In addition, the CTS may be assigned special projects and assignments. The CTS may be upgraded and provide relief coverage for Operations and Maintenance Supervisors.

The CTS will perform other duties as assigned by the Operations and Maintenance Supervisors.

Competency Levels

The Combustion Turbine Specialist position consists of five levels of competency. Individuals can enter at any level based on qualifications, skills and experience.

It is the expectation of NCPA that all employees will progress to the top level. Level Progression Requirements are as follows

Level I - this is the entry level for the Generation Technician position at which the employee must perform the duties described in the CT-PAP-019 procedure for Level I while attaining skills and experience through academic and hands-on training. To advance to the next level an employee must complete.

Level II - an employee must complete all required items in Level II, five

(5) items in Level III and one (1) item in Level IV.

Level III - an employee must complete all required items in Level II and Level III and five (5) items in Level IV.

Level IV – an employee must complete all required items in Level IV and below

Level V – an employee must complete all required items in Level IV and below and eight (8) Items for Level V.

Notes on Attaining Competency Levels: CT-PAP-019 procedure exists to define the requirements on attaining higher competency levels. The procedure is available to prospective candidates upon request.

Typical Physical Demands

• Regularly talks and listens to others to exchange and obtain information to direct the operation and control of the combustion turbine facility.
• Regularly sits at computer and control center, reading displays and inputting data for up to 12 hours
• Regularly visually watches and monitors data on computer display requiring close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus.
• Frequently climbs vertical ladders up to 150ft, including, transitioning sideways and forwards from ladders to elevated platforms through the use of self-closing gates and chains. Occasionally may need to transition through trap doors while simultaneously operating gates at elevated heights.
• Frequently climbs flights of stairs up to 10 stories carrying buckets, boxes or backpacks containing tools and parts weighing up to 50 lbs.
• Occasionally uses fingers and hands to handle manual hoists and ropes to lift small parts and tools to elevated platforms.
• Frequently walks on uneven or slippery surfaces, requires depth perception to observe changing elevations and avoid injury from adjacent high temperature surfaces.
• Frequently steps up, steps down or steps over curbing, containments, pipes, conduits, equipment and foundations.
• Occasionally climbs, wriggles or crawls through small elevated openings such as boiler drum doors or Heat Recovery Steam Generator access hatches.
• Regularly lifts loads up to fifty (50) pounds such as cylinders, tools, parts. Heavier loads will be lifted in teams, or will use hoists or lifts.
• Regularly climbs, transitions and works on scaffolding while wearing fall protection gear.
• Frequently walks, reaches, crawls, squats, kneels and crouches using feet, legs, hands and manual strength to access malfunctioning equipment to inspect and make emergency adjustments. May perform these actions inside, on top of or underneath various equipment.
• Regularly works rotating shift schedule.
• Regularly works while using Personal Protective Equipment (PPE) such as hard hats, gloves, work boots, respirators, chemical suits, face shields, hearing protection and other equipment as needed.
• Regularly works outdoors in all weather conditions.
• Routinely works near heated surfaces; works on slippery or uneven surfaces in precarious places using safety equipment to adjust or operate equipment.
• Routinely listens to operating sounds of equipment to diagnosis equipment malfunctions.
• Works overtime as needed.
• Occasionally operates forklifts, boom truck, man-lifts, bucket trucks and similar equipment.
• Frequently operates agency vehicles going to and from job locations which may require multiple hours of travel time on any given day.

Language Skills

• Ability to read, comprehend, and interpret technical manuals and related documents, written in English, including but not limited to, safety rules, operating and maintenance instructions, and procedure manuals.
• Ability to write routine emails and correspondence.  Ability to effectively communicate information in one-on-one and small group situations to suppliers or other employees of the Agency.
• Regularly communicates (talks, listens, and writes), to exchange and obtain information to direct the operation, maintenance and control of the combustion turbine facility.
• Provides clearly written instructions and reports regarding condition or operation of equipment.

Job Expectations

Acquisition and Use of Technical Knowledge

• Acquires knowledge needed when a job situation changes, new tasks are introduced to the job, or when improved performance requires acquiring extended or specialized information.  Accepts direction or training in areas that require additional skills.
• Possesses or acquires as needed an extensive knowledge of safety, fire, and security rules and procedures.  Given the emphasis of safety at the plant, uses knowledge to improve and report plant conditions and the organization’s safety record.
• Acquires knowledge of operations and maintenance procedures on a continuing basis to stay current as a significant contributor to plant solutions, safety performance, and operations and maintenance improvements.
• Possesses or acquires as needed a fundamental knowledge of instrumentation and control  theory; power plant operation theory and process; computerized control systems and software applications, equipment, systems and their capabilities; mechanical and electrical theory and background to operate equipment; measuring devices and hand tools for maintenance work; general contamination and control practices and procedures; basic math, power plant rules and regulations; physics including pumps/turbine mechanics; switching and clearance procedures; basic principles of thermodynamics and fluid flow; basic water chemistry and chemical processes
• Passes knowledge on to other employees as a way to contribute to the performance of others, or get a job done.
• Assesses and acknowledges own limitations with the fundamental knowledge needed to perform in the job.
• Confers with Operations and/or Maintenance Supervisor to resolve system problems and offers a variety of workable solutions to complex problems and report status of systems and equipment.
• Identifies problems or trends with systems and equipment early to prevent operator or electrical errors.
• Reads and understands engineering drawings such as Process and Instrumentation Diagrams (P&ID), One and Three-Line Diagrams, Piping Isometrics and others.

Application of Technical and General Job Skills

• Technical and general job skills are indicated by demonstrating ability to:
• Efficiently and effectively operate, control, and maintains turbine generator units and auxiliary equipment, and be accountable for all aspects of the job at all NCPA Combustion Turbine facilities.
• Work with management to identify and learn from mistakes made and apply what is learned to future situations or plant conditions.
• Establish and maintain effective work relationships with those contacted in the performance of required duties.
• Lead or participate in identifying and implementing continuous improvement programs and projects.

Educational, Training and Experience Requirements

• Any combination of training and experience which would likely provide the required knowledge, abilities and skills is qualifying for the entry level step.

• A typical way to obtain these knowledge, abilities and skills would be:
• One (1) year experience operating or repairing and maintaining equipment in a Power Generation facility, heavy industrial facility or related military experience or completion of a recognized apprenticeship program or equivalent course work in a related area.

Driver’s License Requirement

Possession of a valid Class “C” license with no limitations issued by the State of California Department of Motor Vehicles. Possess and maintain a good driving record as demonstrated by the absence of multiple or serious traffic violations or accidents within the last three (3) years.

EOE

Responsibilities:
The Hydro Technician troubleshoots, repairs, calibrates, maintains, tests and installs communications and control system hardware, software, and equipment in hydroelectric power generating stations and facilities. Systems include: microwave, telemetry, two-way radio, fiber optic, multiplex carrier, VoIP & POTS telephone, SCADA & DCS, RTU’s, serial comms (RS-232 / RS-485), frame relay, protective relay (transfer trip & power line carrier), Electronic Security Perimeter (Routable Networking components including Defense-in-Depth strategies), routable networks security, physical security (alarms & video surveillance), basic electronics, AC/DC, instrumentation, DC Power, and PV systems.

Essential Duties / Skills: (other duties may be assigned)
· Networking (firewalls, routers, switches, VLAN, encryption, TCP/IP, UDP, VPN, OSI model)
· SCADA (management, graphical development, data historian, OS patches, security)
· Power Plant Control System Security (network security, defense-in-depth, risk modeling/remediation, NERC CIP compliance / monitoring, ports/services)
· PLC interface with DCS distributed control system (input/output, scaling, PLC programming)
· Telemetry (modbus, DNP, Serial, RTU, I/O)
· Telecom (VoIP, POTS, DDS, T1, etc.)
· Microwave (Hardware, software, troubleshooting, etc.)
· Two-Way Radio (900 MHz, Motorola MotoTrbo, etc.)
· Fiber Optics (OTDR, Maintenance, etc.)
· Auxiliary Equipment (Batteries, solar, back-up generators, AC/DC, peripheral computer components)
· Project Management (develop wiring diagrams, layout drawings, & engineering specifications for system modifications)
· Assists with maintenance and repair of mechanical and electrical equipment and systems

Desired Skills:
· Hydroelectric power plant experience.
· Ability to operate, control and monitor hydroelectric generating units and auxiliary equipment.

Qualifications:
· High school diploma with additional education and/or certifications (GROL, NARTE, CISSP, CISCO, etc.) highly desirable.
· Completion of a recognized apprenticeship program or equivalent course work in electronics and data communications.
· At least five (5) years of responsible experience maintaining, installing & repairing electronic control systems & data communications equipment.
· Knowledge of: R56 standards , FCC rules / regulations, NERC CIP standards, Radio frequencies, electronics and instrumentation theory, DC/AC theory, Networking and Security principles.
· Unrestricted CA Drivers License and clean driving record.
· Ability to climb towers up to 175’ and complete physically demanding work in rough natural terrain.
· Willingness to be available for work during off hours in case of emergency.

Benefits: NCPA offers excellent benefits including CalPERS medical and retirement plan. See our website for more details on NCPA’s extensive benefits package.

EOE

Responsibilities:

The Help Desk Analyst is responsible to provide front line technical support to NCPA employees, customers and Members by responding, resolving and documenting a variety of technical requests through the NCPA incident management system.  Requests include software and hardware installs, repairs, troubleshooting, user management including password and certificate support.  Will be responsible to independently coordinate with users to set up equipment for day-to-day use, training and events as needed. 

Essential Duties / Skills: (other duties may be assigned)

• Administration of Windows 10 Professional Operating Systems

• Configure and troubleshoot hardware such as desktops, laptops smart phones and printers
• Work with Incident Management or Help Desk software programs
• Write PowerShell scripts to automate daily tasks
• Document solutions and diagrams in Word, self-help knowledge center, PowerPoint, OneNote and Visio
• Independently research and find solutions to technical problems
• Understanding of TCP/IP and network protocols
• Make CAT5 and 6 Ethernet patch cables
• Ability to self-prioritize a variety of requests and keep customers informed of progress
• May be called upon to travel to NCPA remote field sites as needed
• Provide after-hours emergency system support as necessary
• Provide conference call support for various applications such as GoToMeeting, Skype, and/or Microsoft Teams
• Write application documentation and perform network diagraming
• Assists with audio/visual needs for Agency meetings and events
• Other duties may be assigned

Desired Skills:

• Power industry or utility experience
• Managing Microsoft Active Directory Users and Groups and Group Policies
• Managing Microsoft Azure and Office 365 Cloud Services
• Service/Help Desk ticketing experience
• Experience managing Cisco and HP networking equipment
• Understanding of Certificate Public Key Infrastructure (PKI)
• Customer Service experience

Qualifications:

• Bachelor Degree in Computer Science, Management Information System, Engineering or related field from an accredited institution; or equivalent combination of education and experience.  One or more years of related experience and/or training is desirable.
   
• Experienced in managing Microsoft Desktop Operating Systems.  Proficient in basic computer hardware and software, including Microsoft Office and other 3rd party desktop applications.  Basic understanding of TCP/IP network protocols.
   
• Willingness to be available for work during off hours in case of emergency.

FINAL FILING DATE:                        Open Until Filled  First cut-off is Friday, March 27, 2020.

IT IS MANDATORY THAT YOU COMPLETE THE SUPPLEMENTAL QUESTIONNAIRE. YOUR APPLICATION WILL BE REJECTED IF YOU DO NOT PROVIDE ALL NECESSARY INFORMATION.

THE POSITION

The Human Resources Department is accepting applications for the Regular and full-time position of Senior Electric Business Analyst in the Electric Department.  The current vacancy is in the Electric Technology Systems Division. The normal work schedule is Monday through Friday, 8:00 am –5:00 pm; a flex schedule may be available.

This position will be assigned to the Electric Technology Systems Division. This position will lead an internal group to serve as a liaison between Electric Department business operations and technology system development, implementation, and operation. Specifically, it will responsible for eliciting business and functional system requirements, business process change management, contract and vendor management, designing and managing internal data repositories, system configuration, customization, and testing.

The City of Roseville promotes a no smoking atmosphere.

THE CITY

The City of Roseville (COR) incorporates the following Core Competencies as part of the City’s culture:

• Focus on people: Develop and deliver service-oriented solutions that meet or exceed expectations.
• Build trust: Ensure honesty and integrity to gain confidence and support of others.
• Ensure accountability: Take responsibility for the outcomes of one’s own work and foster a sense of ownership in others.
• Communicate effectively: Deliver clear, concise messages and actively listen to ideas and questions.
• Collaborate inclusively:  Build effective working partnerships, alliances, and teams.
• Make quality decisions: Make sound, timely decisions and recommendations.
• Be adaptable/agile: Change approach or methods to best fit the situation and effectively balance competing priorities.

DEFINITION

To organize, assign and review the work of assigned personnel engaged in the performance of complex professional analytical work in support of a variety of Electric Department projects and programs including financial and system data analysis; to perform duties requiring specialized knowledge; and to provide administrative support to assigned supervisor.

DISTINGUISHING CHARACTERISTICS

This is the advanced journey level in the Electric Business Analyst series.  Positions at this level are distinguished from other classes within the series by the level of responsibility assumed, complexity of duties assigned, independence of action taken, by the amount of time spent performing the duties, and by the nature of the public contact made.  Employees perform the most difficult and responsible types of duties assigned to classes within this series, including providing technical and functional supervision over assigned personnel and perform complex professional analytical work in support of internal and external customers.  Employees at this level are required to be fully trained in all procedures related to assigned areas of responsibility.

SUPERVISION RECEIVED AND EXERCISED

• Receives direction from an assigned supervisor.
• Exercises direct supervision over lower level professional and technical staff.

EXAMPLES OF ESSENTIAL DUTIES - Duties may include, but are not limited to, the following:

• Plan, prioritize, assign, supervise and review the work of professional staff assigned to complex professional analytical duties in support of internal and external customer programs.
• Develop schedules and methods to accomplish assignments ensuring work is completed in a timely and efficient manner.
• Participate in the selection of staff; provide or coordinate staff training; work with employees to correct deficiencies; implement discipline procedures.
• Participate in and review complex cost of service analysis and rate design studies in the development of retail rate options.
• Design, implement, modify, and manage complex databases used to input and extract data and prepare regular and custom reports; design, upgrade, and ensure successful migrations to and from various computer programs; update data and ensure maintenance of accurate data.
• Create statistical models for long-term load and revenue forecasting using specialized software; identify trends in market forces that impact energy use or demand; incorporate energy modeling techniques and new end-users that could impact energy delivery.
• Develop, modify and maintain models for forecasting revenue requirements and cost of services; assist in developing rate structures.
• Perform financial modeling and analysis to evaluate project economics; prepare statistical, feasibility and sensitivity analysis.
• Conduct market assessments, including evaluation of customer base and competitive forces in the market place, demand-side analysis and planning, power supply, risk assessment, and business planning.
• Perform project management, for the more complex projects, from inception to completion; plan, lead, organize, and control project deliverables, schedules, and budgets.
• Research and prepare recommendations regarding proposed legislation, regulatory changes, litigation, and current trends that affect the City’s rate design and implementation.
• Develop recommendations for new, or changes to existing programs or processes to improve efficiency and responsiveness.
• Ensure program compliance with Federal, State and local laws, rules and regulations.
• Intervene and/or support intervention during the development of legislation and regulations consistent with the interests of the City.
• Prepare reports to be used for in-house decision making and to meet regulatory requirements; make oral presentations of findings and conclusions.
• Participate in the selection and oversight of outside consultants.
• Participate in a variety of special projects.
• Perform the most difficult and complex work related to assigned area of responsibility.
• Build and maintain positive working relationships with co-workers, other City employees and the public using principles of good customer service.
• Perform related duties as assigned.

MINIMUM QUALIFICATIONS

Knowledge of:

• Principles and practices of technical and functional supervision and training.
• Principles and practices of research and of quantitative analysis.
• Principles of supervision, training and performance evaluations.
• Principles of data management including database and spreadsheet application.
• Utility load and financial forecasting methodologies.
• Utility load and financial forecasting methodologies.
• Technical and economic characteristics of energy business.
• Project management methodologies.
• Pertinent local, State, and Federal codes, regulations, and laws, and electric utility industry standards.
• Principles of economics, accounting, financial planning, utility cost of service, and energy industry fundamentals.
• Pertinent regulatory reporting requirements.
• Technical report writing procedures and techniques.

Ability to:

• Provide technical and functional supervision over assigned staff; effectively train staff.
• Perform the most complex duties related to financial and system data analysis in support of Electric Department projects, programs and activities.
• On a continuous basis, know and understand all aspects of the job; intermittently analyze work papers, reports and special projects; identify and interpret technical and numerical information; observe and problem solve operational and technical policy and procedures.
• On a continuous basis, sit at desk for long periods of time; intermittently bend, squat, climb, kneel or twist while performing field work; intermittently twist to reach equipment surrounding desk; perform simple grasping and fine manipulation; use telephone, and write or use a keyboard to communicate through written means; and lift or carry weight of 10 pounds or less.
• Prepare a variety of technical, administrative and regulatory reports, documents and correspondence.
• Develop technical and financial models related to cost, rates and revenues.
• Communicate clearly and concisely, both orally and in writing.
• Supervise, train and evaluate assigned staff.
• Establish and maintain effective working relationships with those contacted in the course of work.

EXPERIENCE AND TRAINING

Experience:

Two years of responsible journey level experience performing duties similar to an Electric Business Analyst II with the City of Roseville (performing complex professional analytical work in support of a variety of Electric Department projects and programs, in support of internal and external customers; conducting financial and system data analysis; and participating in the conduct of special studies in support of department business).

AND

Training:

A Bachelor’s degree from an accredited college or university, preferably with major course work in business administration, public administration, accounting, computer science, economics, mathematics or a related field.

License or Certificate:

Possession of a valid California driver’s license by date of appointment.

SUPPLEMENTAL QUESTIONNAIRE

1.  Your responses to questions 2-6, the applicant’s education, training and experience, will be scored using a pre-determined formula.  Your responses to these questions must be consistent with your employment application information.  This experience must also be described in the “Work Experience" section of this application.  Responses to the supplemental questionnaire that are inconsistent from your “Work Experience” section in the application will not be scored.  I understand and agree with the above instructions.

• Yes
• No

2.  Was any of the work experience listed on your application an unpaid internship, or volunteer work?  If so, please list below which ones.

3.  How many years of experience do you have in utility data analysis?

• Less than 2 years
• 2-5 Years
• 5+ Years

4.  Please describe, in detail, your utility data analysis work experience. If you do not have any work experience in this area, please put N/A.

5.  How many years of experience do you have in utility technology project management?

• Less than 1 year
• 1-5 Years
• 5+ Years

6.  Please describe, in detail, your utility technology project management experience. If you do not have any work experience in this area, please put N/A.

7.  What methodology did you utilize to streamline the business requirements from different department/sections during a technology project? How did you achieve the common goals?

8.  The City of Roseville is adopting smart grid technologies such as AMI. The new technologies will generate massive amount of data. What is your experience of assisting business departments to structure the data in order to achieve their business objectives?

SELECTION PROCESS

All candidates meeting the minimum qualifications will have their application scored in a Formula Rate Examination.  The applicant’s experience and education will be evaluated using a pre-determined formula.  Scores from this evaluation will determine applicant ranking and placement on the Employment List.  Supplemental questions will be utilized by the department hiring authority to make interview and selection determinations.  Final appointment is contingent upon a check of past employment references, passing a City-paid fingerprint check and depending on position applied for a pre-employment medical exam and a drug and alcohol screening test.

THE CITY OF ROSEVILLE IS AN EQUAL OPPORTUNITY EMPLOYER.  IF YOU REQUIRE AN ACCOMMODATION DUE TO A DISABILITY, PLEASE CONTACT THE HUMAN RESOURCES DEPARTMENT AT LEAST 5 WORKING DAYS BEFORE A SCHEDULED INTERVIEW/EXAMINATION PROCESS.  MEDICAL DISABILITY VERIFICATION MAY BE REQUIRED PRIOR TO ACCOMMODATION.

FINAL FILING DATE: We are accepting applications until 5:00 pm on March 6, 2020.

IT IS MANDATORY THAT YOU COMPLETE THE SUPPLEMENTAL QUESTIONNAIRE. YOUR APPLICATION WILL BE REJECTED IF YOU DO NOT PROVIDE ALL NECESSARY INFORMATION.

THE POSITION

The Human Resources Department is accepting applications for the Regular and Full-time position of Database Analyst II in the Information Technology Department. There are currently three (3) vacancies in the Information Technology department, please see the job flyer for more information on the positions. The list established from this recruitment may be used to fill and future full-time, limited term, or part-time vacancies. The normal work schedule is Monday through Friday, 8 am–5 pm; a flex schedule may be available.

The City of Roseville promotes a no smoking atmosphere.

For more details on the position, please see the attached job flyer.

SUPPLEMENTAL QUESTIONNAIRE

1. Your responses to questions 2-8, the applicant’s education, training and experience, will be scored using a pre-determined formula.  Your responses to these questions must be consistent with your employment application information.  This experience must also be described in the “Work Experience" section of this application.  Responses to the supplemental questionnaire that are inconsistent from your “Work Experience” section in the application will not be scored.  I understand and agree with the above instructions.

• Yes
• No

2. Was any of the work experience listed on your application an unpaid internship, or volunteer work?  If so, please list below which ones.

3. How many years of experience do you have performing duties related to Database administration, Integrations, Business Intelligence or Open Data?

• Less than 2 years
• 2 to 3 years
• 3 to 4 years
• 4 to 5 years
• 5+ Years

4. Will you accept part-time, temporary work?

5. Please indicate which database analyst position(s) you are applying for:

• Part time 1500 hour per year- Database Administration
• Limited term – Open Data
• Full time – Database Analyst

6. Describe your knowledge, skill, or ability in one or more of the following areas.  In so doing, please provide any relevant work experience and specific examples that demonstrate your competency.  Note: it is not required to respond to all areas listed below:

• Business Intelligence
• Database Administration
• Enterprise GIS Administration
• System Integration
• Open Data

7. As part of your Data Analyst role, you will be working closely with vendors, analysts, and customers throughout the City.  Give an example of how you have collaborated to make a project successful.

8. Please list your completed education from an accredited college or university. List the degree, major and institution.

FINAL FILING DATE: We are accepting applications until 5:00 pm on March 6, 2020.

IT IS MANDATORY THAT YOU COMPLETE THE SUPPLEMENTAL QUESTIONNAIRE. YOUR APPLICATION WILL BE REJECTED IF YOU DO NOT PROVIDE ALL NECESSARY INFORMATION.

THE POSITION

The Human Resources Department is accepting applications for the Regular and Full-time position of Database Analyst I in the Information Technology Department. There are currently three (3) vacancies in the Information Technology department, please see the job flyer for more information on the positions. The list established from this recruitment may be used to fill and future full-time, limited term, or part-time vacancies. The normal work schedule is Monday through Friday, 8 am–5 pm; a flex schedule may be available.

The City of Roseville promotes a no smoking atmosphere.

For more details on the position, please see the attached job flyer.

SUPPLEMENTAL QUESTIONNAIRE

1. Your responses to questions 2-8, the applicant’s education, training and experience, will be scored using a pre-determined formula.  Your responses to these questions must be consistent with your employment application information.  This experience must also be described in the “Work Experience" section of this application.  Responses to the supplemental questionnaire that are inconsistent from your “Work Experience” section in the application will not be scored.  I understand and agree with the above instructions.

• Yes
• No

2. Was any of the work experience listed on your application an unpaid internship, or volunteer work?  If so, please list below which ones.

3. How many years of experience do you have performing duties related to Database administration, Integrations, Business Intelligence or Open Data?

• Less than 2 years
• 2 to 3 years
• 3 to 4 years
• 4 to 5 years
• 5+ Years

4. Will you accept part-time, temporary work?

5. Please indicate which database analyst position(s) you are applying for:

• Part time 1500 hour per year- Database Administration
• Limited term – Open Data
• Full time – Database Analyst

6. Describe your knowledge, skill, or ability in one or more of the following areas.  In so doing, please provide any relevant work experience and specific examples that demonstrate your competency.  Note: it is not required to respond to all areas listed below:

• Business Intelligence
• Database Administration
• Enterprise GIS Administration
• System Integration
• Open Data

7. As part of your Data Analyst role, you will be working closely with vendors, analysts, and customers throughout the City.  Give an example of how you have collaborated to make a project successful.

8. Please list your completed education from an accredited college or university. List the degree, major and institution.

FINAL FILING DATE: We are accepting applications on a continuous basis.

IT IS MANDATORY THAT YOU COMPLETE THE SUPPLEMENTAL QUESTIONNAIRE. YOUR APPLICATION WILL BE REJECTED IF YOU DO NOT PROVIDE ALL NECESSARY INFORMATION.

THE POSITION

The Human Resources Department is accepting applications for the regular and full-time position of Refuse Truck Driver I in the Environmental Utilities Department. The normal work schedule is Monday through Friday 6:30 a.m. – 2:30 p.m. with weekends required. The list established for this recruitment may also be utilized to fill any limited term or part-time, temporary vacancies. The term length for limited term placements is not guaranteed but cannot exceed 36 months. A part-time temporary position cannot exceed 25 hours per week.

The City of Roseville promotes a no smoking atmosphere.

DEFINITION

To perform a variety of tasks in the collection of residential, commercial, and industrial solid waste refuse, including driving and operating a refuse collection truck.

DISTINGUISHING CHARACTERISTICS

This is the entry level class in the Refuse Truck Driver series.  Positions in this class typically have little or no directly related work experience and work under immediate supervision while learning job tasks.  The Refuse Truck Driver I class is distinguished from the II level by the performance of less than the full range of duties assigned to the II level.  Incumbents work under immediate supervision while learning job tasks, progressing to general supervision as procedures and processes of assigned area of responsibility are learned.

SUPERVISION RECEIVED AND EXERCISED

Receives immediate supervision from a Refuse Supervisor, and receives technical and functional supervision from a Senior Refuse Truck Driver.

EXAMPLES OF ESSENTIAL DUTIES - Duties may include, but are not limited to, the following:

• Drive a one or two-person-staffed refuse collection truck, collecting refuse along an assigned route and emptying contents of trash cans and/or collection bins.
• Operate hydraulic/mechanical controls to load, compress, and dump refuse; collect and dispose of debris on assigned route; transport refuse to/unload at appropriate landfill sites and/or sewage treatment plant.
• Assist refuse truck driver by directing movement into alleys, driveways, and other difficult locations; assist truck driver with lifting/loading contents of trash cans and other collection containers.
• Complete and post notification tags on containers/bins/dumpsters regarding contents not acceptable for refuse collection.
• Maintain assigned truck by regular cleaning and washing, including inspecting for mechanical or other operating problems; report mechanical or related problems for maintenance; perform minor maintenance as appropriate.
• Complete, maintain, and submit records related to operations and maintenance activities, including those related to time, material and equipment usage.
• Build and maintain positive working relationships with co-workers, other City employees, and the public using principles of good customer service.
• Perform related duties as assigned.

MINIMUM QUALIFICATIONS

Knowledge of:

• Uses and purposes of general mechanical tools and equipment; safe work practices.

Ability to:

• Learn refuse collection techniques and to operate refuse collection vehicles and equipment.
• On a continuous basis, know and understand operations, and observe safety rules.  Intermittently analyze problem equipment; identify and locate equipment; interpret work orders; remember equipment location; and explain jobs to others.
• Intermittently, sit while studying or preparing reports; bend, squat, climb, kneel and twist when performing installation of equipment; perform simple and power grasping, pushing, pulling, and fine manipulation; and lift or carry weight of 50 pounds or less.
• Communicate clearly and concisely, both orally and in writing.
• Establish and maintain effective working relationships with those contacted in the course of work.

Experience and Training

Experience:

No experience is required; some general maintenance and/or construction experience is preferred.

AND

Training:

Equivalent to the completion of the twelfth (12th) grade, GED, or higher level degree.

License or Certificate

Possession of a valid California Class B driver’s license, with airbrakes by date of application.

SUPPLEMENTAL QUESTIONNAIRE

1. Your response to question 3, the applicant’s education, training and experience, will be scored using a pre-determined formula.  Your responses to these questions must be consistent with your employment application information.  This experience must also be described in the “Work Experience" section of this application.  Responses to the supplemental questionnaire that are inconsistent from your “Work Experience” section in the application will not be scored.  I understand and agree with the above instructions.

• Yes
• No

2. Was any of the work experience listed on your application an unpaid internship, or volunteer work?  If so, please list below which ones. If none, please put N/A.

3. How many years of experience do you have performing some general maintenance and/or construction duties?

• Less than 1 year
• 1-2 years
• 2-3 years
• 3-4 years
• 4+ years

4. Please describe your general maintenance or construction duties?

5. Do you currently possess a valid California class A or B driver’s license with airbrakes? If yes, please list the expiration date.

6. Are you willing to work weekends indefinitely?

• Yes
• No

7. Are you willing to accept a limited term assignment? The term length for limited term placements is not guaranteed but cannot exceed 36 months.

• Yes
• No

8. Are you willing to accept part-time, temporary work?

• Yes
• No

SELECTION PROCESS

All candidates meeting the minimum qualifications will have their application scored in a Formula Rate Examination.  The applicant’s experience and education will be evaluated using a pre-determined formula.  Scores from this evaluation will determine applicant ranking and placement on the Employment List.  Supplemental questions will be utilized by the department hiring authority to make interview and selection determinations.  Final appointment is contingent upon a check of past employment references, passing a City-paid fingerprint check and depending on position applied for a pre-employment medical exam and a drug and alcohol screening test.

THE CITY OF ROSEVILLE IS AN EQUAL OPPORTUNITY EMPLOYER.  IF YOU REQUIRE AN ACCOMMODATION DUE TO A DISABILITY, PLEASE CONTACT THE HUMAN RESOURCES DEPARTMENT AT LEAST 5 WORKING DAYS BEFORE A SCHEDULED INTERVIEW/EXAMINATION PROCESS.  MEDICAL DISABILITY VERIFICATION MAY BE REQUIRED PRIOR TO ACCOMMODATION.